Used Bottom Sanders for sale (4,530)

Condition: used, Year of construction: 1991, Working width 1100 mm Number of sanding units 2 st. Used Machine Year of Manufacture: 1991 Condition: Machine fully serviced and inspected Features and Technical Specifications: - Working width: 1100 mm - Working height: 140 mm - Height adjustment: electric - Workpiece thickness display: digital - Units: 2 - 1st unit: Combination unit (roller - shoe) with electronic segmented shoe - 2nd unit: Shoe unit, with electronic segmented shoe - With vacuum conveyor belt Bdedpfozwg Tpox Ac Teg - Dust removal brush: yes - Motor power: 2 x 15 kW - Current consumption: 65 A - Exhaust connection: 4 x 200 mm - Sanding belts: 1120 x 1900 mm - Dimensions: 2300 x 1900 x 2500 mm - Weight: 3500 kg

Condition: used, Year of construction: 1976, Working width 1350 mm Number of sanding units x st. Second-hand machine Year of manufacture: 1976 Features and technical specifications: - grinding from below - Material feed via rubber rollers - Non-contact control of oscillation - Quick-change pressure bar - Electric motor-driven adjustment of tool thickness with an easy-to-read display Digital display - Push-button control with contactor control - Sanding width 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width 1360 mm - Sanding belt length 1900 mm - Roller feed speed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption approx. 180 NL/min Motor power 17.5 kW Dimensions W x D x H 1800 x 1100 x 1520 mm Weight: 2,600 kg Bdodezk Nyrepfx Ac Teg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1998, Working width 1350 mm Number of sanding units x st. Second-hand machine Year of manufacture: 1998 1 automatic belt sander with combination unit with electronic articulated pressure beam For sanding soft and hard veneers Bdodpfxszk Nxze Ac Tjg Calibration and fine sanding of solid wood Calibration of workpiece carrier plates Sanding off defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro and polyester coatings Grinding of barrier films with graphical operator terminal NC-controlled thickness adjustment from 3–150 mm Activation of the calibration roller via terminal With patented CSD articulated pressure beam for compensating for workpiece tolerances of up to 2 mm Grinding width 1350 mm Grinding belt length: 2150 mm Grinding belt speed, frequency-controlled: approx. 2–18 m/sec Grinding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt discharge 490 l/min Extraction connection: 180 mm Air requirement for grinding unit: 1,800 m³/h Required air velocity: 20 m/sec Total power requirement approx. 17 kW Weight approx. 2,500 kg Dimensions WxDxH 2090x1670x2020 mm The machine is yet to be fitted with a new pre-lift belt Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 1984, Working width 1350 mm Number of sanding units x st. Used machine Year of manufacture: 1984 Condition: completely inspected + serviced Equipment and technical data: - Incl. combi unit with contact roller and sanding pad - with height-adjustable contact roller for calibrating - with workpiece-controlled air-cushion pressure pad - 4-way adjustable grit compensation - with pneumatic belt tensioning device - with a rotating texturing brush on the outfeed side of the machine - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed infinitely variable 2.5 - 12.5 m/min. - with roller table at the infeed - with separate additional texturing brush - with roller table at the outfeed - with digital display device for the electric-motor-driven workpiece thickness adjustment - with automatic workpiece thickness adjustment Bdjdpfxezlbpns Ac Tog - Extraction ports 2 x 200 mm - Feed belt is OK; has a defect in one place (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Images show the machine in a not-yet-inspected condition! Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 1983, Working width 1350 mm Number of sanding units x st. Second-hand machine Year of manufacture: 1983 Condition: fully inspected and serviced, Includes new feed belt Features and technical specifications: - Includes combination unit with contact roller and sanding shoe - with height-adjustable contact roller for calibration - with an air-cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - with pneumatic belt tensioning device - fitted with a rotating cleaning brush on the outlet side of the machine Bdodpfx Acszk Npmj Tsg - Belt oscillation controlled by a photoelectric sensor for automatic monitoring and control of the lateral belt position to ensure even belt wear - with roller table at the inlet - with digital display for the electrically driven workpiece thickness adjustment - with additional veneer sanding beam - Includes 2 spare grinding shoes - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Clearance height: 150 mm - Main motor: 15 kW - Feed speed continuously adjustable from 2.5 to 12.5 m/min - Extraction connections: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2,300 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2001, Working width 1100 mm Number of sanding units 3 st. Second-hand machine Year of manufacture: 2001 Features and technical specifications: Grinding width: 1,100 mm Abrasive belt length: 1,900 mm Workpiece thickness: 3–150 mm Feed speeds: infinitely variable 2.5–13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 grinding shoe unit: with air-cushion grinding shoe Drives: 1. Grinding unit: 15 kW 2nd grinding unit: 15 kW 3. Grinding unit: 11 kW with table extension at the inlet with table extension at the outlet Total power rating: 43 kW Bjdpfxszk Nm Se Ac Todg Extraction capacity: approx. 6,750 m³/h Air velocity: 20 m/s Compressed air connection: 6–8 bar Air consumption: approx. 30 l/min Dimensions: 1,750 x 2,740 x 1,890 mm Weight: 3,100 kg Availability: at short notice Location: 65439 Flörsheim

Condition: used, Year of construction: 2018, Sander Multizon ozone generator with a rated output of 120 g of ozone per hour. Bedpfxjzx A Ixj Ac Todg Technical data according to the nameplate: - Manufacturer: Erwin Sander Elektroapparatbau GmbH - Machine: Multizon ozone generator, 120 g/h - Type: - Machine no.: 2582 - Year of manufacture: 2018 - Rated output: 120 g ozone/h - Ozone concentration: 20 g ozone/m³ - Permissible operating pressure: -0.05 bar - Air flow rate: 6.0 m³/h - Electrical connection: 400 V – N – PE, 50 Hz - Power requirement: 12 kVA (excluding injector pump) - Current consumption: L1 13 A; L2 5.4 A; L3 10 A - Weight: 330 kg - CE marking

Condition: ready for operation (used), Usable grinding wheel diameter: 500 mm Table size: 400 x 800 mm Table tilt downwards/upwards up to: 45/30° Grinding wheel speed: 1400 rpm Grinding wheel drive: 380 V, 2.2 kW Bedpfx Aszvm Svec Tjdg Space requirement: 950 x 800 x 1200 mm

Condition: like new (used), Year of construction: 2004, Grinding wheel diameter: 500 mm Grinding table width in front of the wheel: 240 mm Grinding table tilt downwards/upwards: 45/30° Grinding wheel speed: 1500 rpm Drive motor: 400 V, 4 kW Bsdpfx Acjzvm N Uo Tsdg Weight: 280 kg

Condition: used, Year of construction: 2021, - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Wide-belt sanding machine Manufacturer: Felder Type: FW 1102 P Year of manufacture: 2021 Technical data - Contact roller unit - Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width - Touchscreen color display 7" - Digital grit adjustment - Vacuum table incl. blower in the machine frame - Stepless feed speed 2.5 - 18 m/min, controllable from the touchscreen - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Bodpfxjzuzcme Ac Tjdg

Condition: used, Year of construction: 2007, Wide-belt sanding machine Manufacturer: Kündig Type: Premium-2 1100-RE Year of manufacture: 2007 Technical data: Working width: 1100 mm Working height (max.): 200 mm Sanding roller Sanding shoe for finish sanding Bjdpozuza Sjfx Ac Tsdg Belt cleaning Vacuum 400 V, 50 Hz, 24 VDC 57.5 amps 28.4 kW Includes loading Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1995, Number of belts: 2 Max. working width: 920 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibrating roller Design of 1st roller: Grooved steel roller Abrasive belt length 1st unit: 1525 mm Abrasive belt width 1st unit: 930 mm Abrasive belt speed 1st unit: 16 m/sec 2nd belt: Combination unit Design of 2nd roller: Grooved rubber roller Sanding shoe 2nd unit: rigid Abrasive belt length 2nd unit: 1525 mm Abrasive belt width 2nd unit: 930 mm Abrasive belt speed 2nd unit: 16 m/sec Material thickness measuring device: Yes Fixed feed rate: 4.5 + 9 m/min Bdsdezxt Agspfx Ac Tjg Control: Hand control panel Elec./pneumatic belt oscillation: Yes Infeed height: variable (lower table moves) Table stroke: electro-motoric Table display: mechanical digital display Operating pressure: 6 bar Weight approx.: 1100 kg Motor power: 11 kW Extraction diameter: 200 mm Storage location:

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Belt width: 1370 mm Belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed rate: 2.5 - 13 m/min (infinitely adjustable) Belt blowing system Dust brush Drives: Grinding unit: 15 kW Total connected load: 17 kW Weight: approx. 2400 kg Bdsdpfjzwm Hcsx Ac Tsg Dimensions: 2000 x 1850 x 2100 mm Location: Nattheim

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. Bedozu Nvzopfx Ac Todg - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Bodpfx Aex Twcpsc Tsdg

Condition: excellent (used), Catalog number: 8047 TECHNICAL DATA - max. width of the workpiece: 1100mm - max. height of the workpiece: 160mm – Top: - 2 sliding metal rollers - unit: grooved rubber roller + shoe + metal roller - sliding rubber roller – Bottom: - sliding rubber roller - conveyor belt - sliding rubber roller - pneumatic belt oscillation Bdedpfszx Swpox Ac Tog - stepless feed speed adjustment - electric machine body lifting - pneumatic brake - total power: 10.5kW - operating pressure: 6-8 bar - diameter of the dust extraction nozzle: 190mm - dimensions (L/W/H): 1470x1540x2000mm – weight: 1260kg ADVANTAGES - Made in Germany - Single-head grinder with a 1100mm wide shoe - Unpainted – used grinder, very good condition Net price: 19900 PLN Net price: 4740 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8037 TECHNICAL DATA - Max. width of the workpiece: 1100 mm - Max. height of the workpiece: 160 mm 2 units: 1) Metal, grooved roller for calibrating 2) Rubber, grooved roller + pneumatic sequential apron + metal roller - Motor power: 15 kW - Brake - Top: - Rubber roller, slip, split - Unit - Rubber roller, slip, split - Unit with apron - Rubber, slip, split output roller - Bottom: - 2 metal rollers, slip - Conveyor belt - 2 metal rollers, slip, output - Pneumatic belt oscillation with photocell - Electric table lifting - 2 feed speed types - Feed motor: 0.45 kW / 0.8 kW - Grinding thickness potentiometer - Working pressure: 8-10 bar - Diameter of dust extraction nozzle: 2 x 160 mm - Overall dimensions (L/W/H): 1900 x 1700 x 2000 mm - Weight: 1413 kg ADVANTAGES - Made in Italy, SCM brand - 2 units - Grinding thickness potentiometer Bodpfx Aezx Sm Doc Todg - Pneumatic sequential apron - Not painted - DTR documentation - Used sander, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (the price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8046 Technical data: - max width of workpiece 900mm - max height of workpiece 160mm 2 units: 1) ribbed rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: - rubber roller, slip roller I unit - 2x rubber roller, slip roller II unit - slip roller, rubber roller, smooth – from below: Bdjdpfx Acjzx Rzyo Tsg - conveyor belt - pneumatic belt oscillation - 2 types of feed speed 0.55kW - electric table lifting - main motor 7.5kW - working pressure 6-8 bar - diameter of dust extraction nozzle 2x160mm - dimensions L/W/H 1300x1500x1950mm - weight 1100kg Advantages: – Italian production, – unpainted – used grinder, very good condition Net price: 28900 PLN Net price: 6890 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: used, color: white, Equipment: crane, Link-Belt RTC-80100 II Bjdpfezk Icfsx Ac Tedg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, New wide belt sanding machine for wood panels (including dust extraction) Bdedpfxjxxlz Uj Ac Teg

Condition: excellent (used), Catalog number 7828 Bdodpjzxqrlsfx Ac Teg TECHNICAL DATA - max. width of workpiece: 200 mm - max. height of workpiece: 180 mm - 2 sanding units: - top: metal roller + sanding shoe + metal roller - bottom: metal roller + sanding shoe + metal roller - top: - 2 pressure rollers, rubber, pulling type - sanding unit - 2 pressure rollers, rubber, pulling type - bottom: - sanding unit - side guide strip - electrically adjustable sanding height, 0.37 kW - 6 feed speed settings + right/left: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor: 0.75 kW - main motors: 2 x 4 kW - diameter of dust extraction nozzles: 80 mm - overall dimensions (L/W/H): 1500x740x1600 mm - weight: 560 kg ADVANTAGES - Made in Germany - 2 sanding units - Unpainted - DTR documentation - Used sander, very good condition Net price: 10900 PLN Net price: 2600 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 1976, 1 unit of BÜTFERING FBS wide-belt sanding machine including sanding belts Color: as shown in the pictures, according to the images and inspection Year of manufacture: 1976 Machine number: 8249 Dimensions L/W/H: 170x110x140cm Bdsdozvc Imopfx Ac Teg Condition: used Payment method: prepayment by bank transfer Shipping: Self-pickup only - No shipping is offered for this item!

Condition: excellent (used), Catalogue No.: 7810 TECHNICAL DATA max working width: 630 mm max working height: 110 mm 2 units: 1) grooved rubber roller for calibration 2) grooved rubber roller for calibration + pad + metal roller *from above: metal feed-in slip roller unit metal slip roller unit metal slip roller *from below: 2 metal slip rollers feed belt 2 metal slip rollers pneumatic belt oscillation 2 feed speeds motor: 2×7.5 kW electric table elevation operating pressure: 6-8 bar extraction port diameter: 2x160 mm overall dimensions (L/W/H): 1650x1060x1970 mm weight: 972 kg – Polish manufacture – 2 units – unpainted – very good condition – used sander Bdedezxhihepfx Ac Tsg Net price: 25,900 PLN Net price: 6,160 EUR (at exchange rate 4.2 EUR) (Prices may fluctuate with significant currency changes)

Condition: excellent (used), CATALOGUE NUMBER 8032 TECHNICAL DATA - max. width of the workpiece: 970mm - max. height of the workpiece: 160mm - 2 units - 1) ribbed rubber roller - 2) two metal rollers + shoe - motor power of unit I and II: 11kW - total power: 12kW - brake * from above: - metal roller, slip Bsdpfxezxg H Sj Ac Tjdg - pressure roller - unit - metal roller, slip - pressure roller - unit - metal roller, slip * from below: - rubber roller, slip - conveyor belt - pneumatic belt oscillation - electric table lifting - 2 feed speed settings - feed motor approx. 0.75kW - working pressure: 8-10 bar - diameter of the extraction nozzle: 2x160mm - overall dimensions (L/W/H): 1600x1500x2000mm - weight: 1370kg ADVANTAGES - Made in Italy - 2 units - Unpainted - Used sander, very good condition Net price: 21900 PLN Net price: 5200 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding pad and finish sanding. Ideal sanding machine for interior finishing companies, also suitable for intermediate sanding before painting. Edge sanding machine with combination unit and electronic segmented pressure bar, edge segments can be switched on and off. Segment width of the pressure bar 35mm. Contact roller pneumatically adjustable, low wear due to ribbed steel roller. Grain size compensation. Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s. Belt feed steplessly adjustable via frequency inverter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900mm by adjusting the top part of the machine, thus also integrable into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340mm. Workpiece height approx. 3 to 150mm. Common sanding belt dimension 1360 x 1900mm. 3 rubberized pressure rollers. Infeed roller table and foldable outlet table. Preparation for vacuum blower. The belt is perforated and connectors for optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar engagement points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Bdedpfx Acezqvmre Teg Operating manual. Without the illustrated connection cable. Original paint, only retouched in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on-site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".