Used Binder Cb 210 187°C 210 Liter for sale (59,671)

Condition: new, Year of construction: 2009, We are selling new gas burner BINDER, model EUC 1168 ES.X-100-OCG. Hedpfxsl Axqpe Ampel

Condition: new, empty load weight: 910 kg, maximum load weight: 2,590 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,940 mm, loading space width: 1,870 mm, loading space height: 210 mm, loading space volume: 1.5 m³, color: black, construction height: 2,690 mm, working width: 2,540 mm, lowerable loading area / high tarpaulin 210cm / manual hydraulics / braked, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. lowerable loading area / high tarpaulin 210cm / manual hydraulics / braked Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500kg - Unladen weight: 910 kg - Payload: 2,590 kg - Interior dimensions: 394 x 187 x 210 cm (L x W x H) - Overall exterior dimensions: 553 x 254 x 269 cm (LxWxH) - Loading sill height: 44 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, 45mm with clamp - 100km/h: at an extra charge - incl. Vehicle documents Vehicle superstructure: - Floor: multiplex wooden floor - Drop sides: aluminium anodized 3-sided - Drop side height: 10cm - Chassis: low loader lowerable, ALKO rubber spring axle - Tipping function: lowerable - Hydraulics: hand pump - Drive-on angle: approx. 6 - Wheel stop: without - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Lashing eyes: 10 pieces laterally recessed - Winch: at extra charge - Supports: supported by rear. - Ramps: with rear drive-over point - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Multiplex wooden floor - Extremely robust - Fixed 10 mm drop sides - Insertion options at all corners, e.g. for tarpaulin frame - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options for attaching tarpaulin frame - Many options for attaching tarpaulin frame - Very sturdy welded steel frame - Many options for attaching tarpaulin frame - Many options for attaching tarpaulin frame. frame completely hot-dip galvanized - many stable cross beams therefore high point load - loading area can be lowered hydraulically - mechanical safety locking of the swivel axle in driving mode - with drive-over point at the rear - additional longitudinal struts welded in throughout - storage box at the front - 10 lashing eyes inside the loading area - license plate holder at the rear, can be swivelled away for loading - ALKO overrun device and parking brake - ALKO coupling head - very stable V-drawbar REINFORCED - automatic reverse drive - 13-pin plug - reversing lights - large reversing light - large rear lights - rear view mirror - large rear view mirror - large rear view mirror. plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light ? Lighting recessed in the rear frame ? Support wheel with center clamp ? Registration papers: COC papers Special equipment included in the price: ? original Vezeko tarpaulin and bows 210 cm. high - color black (optional other color possible) ? Mounting tarpaulin system Accessories can be retrofitted - please enquire: ? 100 km/h approval with wheel shock absorbers ? Anti-theft device ? Spare wheel ? High tarpaulin ? additional lashing eyes ? Reversing lights ? Lashing straps ? and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Hedpfx Aeu Hrnfempsl

Condition: new, empty load weight: 705 kg, maximum load weight: 1,995 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,940 mm, loading space width: 1,870 mm, loading space height: 210 mm, loading space volume: 1.5 m³, color: black, construction height: 2,640 mm, working width: 2,540 mm, lowerable loading area / high tarpaulin 210cm / manual hydraulics / braked, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. lowerable loading area / high tarpaulin 210cm / manual hydraulics / braked Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,700kg - Unladen weight: 705 kg - Payload: 1,995 kg - Interior dimensions: 394 x 183 x 210 cm (L x W x H) - Overall exterior dimensions: 553 x 254 x 264 cm (L x W x H) - Loading sill height: 44 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, 45mm with clamp - 100km/h: at extra charge - incl. Vehicle documents Vehicle superstructure: - Floor: Multiplex wooden floor - Drop sides: Aluminium anodized 3-sided - Drop side height: 10cm - Chassis: Low loader lowerable, ALKO rubber spring axle - Tipping function: lowerable - Hydraulics: Hand pump - Drive-on angle: approx. 6 - Wheel stopper: without - Overrun device & brake: ALKO - Frame/chassis: Welded hot-dip galvanized steel frame - Lashing eyes: 10 pieces recessed on the side - Winch: at extra charge - Supports: Supported by rear. - Ramps: with rear drive-over point - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Multiplex wooden floor - Extremely robust - Fixed 10 mm drop sides - Insertion options at all corners, e.g. for tarpaulin frame - Very sturdy welded steel frame - Frame completely hot-dip galvanized frame completely hot-dip galvanized - many stable cross beams therefore high point load - loading area can be lowered hydraulically - mechanical safety locking of the swivel axle in driving mode - with drive-over point at the rear - additional longitudinal struts welded in throughout - storage box at the front - 10 lashing eyes inside the loading area - license plate holder at the rear, can be swivelled away for loading - ALKO overrun device and parking brake - ALKO coupling head - very stable V-drawbar REINFORCED - automatic reversing - 13-pin plug - reversing lights - large reversing lights - large rear lights - rear view mirror - large rear view mirror - large rear view mirror. plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - support wheel with central clamp - registration papers: COC papers Special equipment included in the price: - Original Vezeko tarpaulin and bows 210 cm. high - color black (other colors optionally possible) - mounting tarpaulin system accessories can be retrofitted - please inquire: - 100km/h approval with wheel shock absorbers - anti-theft device - spare wheel - high tarpaulin - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Hedou Skraspfx Ampsl

Condition: good (used), Fastbind Elite XT Perfect binder Machine in very good visual and technical condition. Possibility of gluing hard and soft covers and blocks. The machine is equipped with milling. Ideal for photo books. Original product – Made in Finland Hard cover strip included as well as soft cover set. Description: Technical capabilities of the machine: cycles / hour up to 450 Productivity: books / hour up to 180 Min. / max. cover thickness 0.1–50 mm Max. length of glued spine 455 mm Max. cover thickness 400 g / m² Hjdpfjyvp D Dsx Ampel Voltage 220–240 V Machine dimensions (width / length / height) 1050 x 520 x 570 mm Weight 70 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 223 rpm -Power: 2.2 kW -Construction: B5 -Diameter shaft: O 30 mm Hsdpfx Amecill Djpjl -Protection class: IP 33 -Price per piece -Quantity: 2 pieces available -Dimensions: 600/270 / H250 mm -Weight: 41 kgpc.

Condition: excellent (used), Heraeus Vötsch Type: VCS 7018-5 Hjdpfev N Hc Ejx Ampsl Climatic Test Chamber with Humidity Control, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Characteristics for Temperature Tests: Temperature Range: -70°C to +180°C Temperature Range: ± 0.1 to ± 0.5 K Spatial Range: ± 0.5 to ± 2.0 K Temperature Gradient: 1 to 4 K Temperature Rate of Change according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Characteristic values for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature deviation over space: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time: ± 1 to ± 3% RH F. Dew point range -3 to +94 °C Electrical connection: Nominal voltage: 3/N/PE AC 400V±10% 50Hz Nominal power: 10 kW Nominal current: 21 A Fuse protection: 32 A slow-blow, provided by the customer Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your safety, please note the following information! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2002, condition: used, Tank-& Umweltschutz Wozniack specialized company according to the Water Resources Act Hjdpfoc Nkx Usx Ampjl Dear Sir or Madam, we offer a 50,000 liter double-walled storage tank for the storage of fuel oil and diesel . Nominal capacity 50 cbm piece 1 used but overhauled, that means the tank is cleaned, refurbished, primed and painted Color equipment lacquer RAL ; however, you can also bring in your own color wishes at any time. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate Piece 1 dipstick Piece1 venting spigot Piece1 filling nozzle Piece 1 new limit switch Piece 1 new leak detection sight with filled up leak liquid Piece 1 ladder piece 1 suction line Shape cylindrical storage tank with feet/console tank dimensions length approx . 8.220 mm diameter approx. 2.900 mm Weight approx. 8.000 kg Storage above ground Of course you can also design your tank system! All our installations are checked and inspected in our company by selected employees. extensively controlled and checked. We offer an inexpensive delivery on request additionally. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are in all sizes and are available for sale on our premises. All our tanks can be offered without diesel pump. Top in the offer . Liquid fuel - AHL tanks in the size of 10.000-100.000 liters. Water tank Loeschwassertank in the offer . Price/ Shipping The price for the tank station is valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank installations and can, as an approved specialist company according to the Water Resources Act (WHG) we can professionally empty, clean, dismantle and transport them away. With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Condition: ready for operation (used), Binder 86 61111H03 Electromagnetic brake 24 VDC A.Nr. 2821/133,used, good condition, 100% working, scope of supply acc. photos Hedpjpnplusfx Ampsl

Condition: good (used), Stop magnet, pull magnet, eject magnet, stop magnet, locking unit Hjdeb A Suhopfx Ampsl -Type: 50 003-06C1 -Connection: 220 V -Magnetic force: 6.5N Price: per piece -Quantity: 2 available -Weight: 0.4 kg

Condition: new, Siemens 1AV1072B / 1LE1002-0CB2 motor with gearbox, serial number: FDU1903/2479321001, unused, 100% functional, scope of delivery as per photos Hedsx Dv I Aopfx Ampjl

Condition: ready for operation (used), Mitsubishi HA80CB-SS servo motor SN:180715 + Tamagawa OSE 5KN-6-12-108 encoder SN:66018S, used, normal signs of use, 100% functional, scope of delivery as per photos Hedpji D I R Dofx Ampjl

Condition: new, Siemens 1PH7133-2NF02-0CB0 asynchronous motor SN YFW812553110002 + W2D210-EA10-11 fan, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for packaging and shipping costs separately! Hjdpox Dvzvofx Ampjl

Condition: used, Year of construction: 2008, Power: 2.2 kW Voltage: 400V / 50 Hz Pipe connection: 4 x 80 mm Hodpjxdplnsfx Ampjl

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Hodpfx Amowc Ri Iepjl Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted Hjdpfswc Rk Esx Ampel 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg Hedpewc Afhsfx Ampol ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: used, Year of construction: 2016, Manufacturer: Schweyer Model: CB-EL Year: 2016 Type: Belt conveyor Power: 0.12 kW Variable speed drive Length: 270 cm Width: 65 cm Hodpfx Amsy Hdqgopel Conveyor belt width: 150 mm Product delivery height: - Position 1: 160 cm - Position 2 : 180 cm

Condition: excellent (used), CTS Climate Test Chamber C-70/1000-S Device Data Manufacturer: CTS GmbH Model: C-70/1000-S Year of manufacture: 08/2011 Serial number: 113054 Type: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Applications in industry, research, development, and quality assurance. Temperature and Climate Data Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data Hedsy Iam Hopfx Ampol 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Cooling System Refrigerants: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features CTS control unit with LCD display Programmable operation Digital setpoint/actual value display Viewing window in door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Cable ports on the sides Feedthroughs approx. 50 mm and approx. 125 mm RS232 interface as per documentation Digital outputs for test specimen control Mobile design on castors Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation size (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of conformity Test certificates Operating manual Error messages and digital channels Site plan Quick guide Humidity diagram Scope of Delivery CTS Climate Test Chamber C-70/1000-S Documentation as available Scope of delivery as shown Optional Pre-delivery Service Function test Refrigerant service Leak test Test run with protocol Condition Used. Condition as per photos. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized on request. Subject to prior sale and technical changes. If you have any questions, please feel free to contact us.

Condition: used, mileage: 399,824 km, power: 154 kW (209.38 HP), first registration: 01/2018, fuel type: diesel, tire size: 235/75R17,5, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 5,880 mm, loading space width: 2,470 mm, loading space height: 2,250 mm, Year of construction: 2018, Equipment: air conditioning, electric window regulation, tail-lift, Tyre size: 235/75R17,5 Hjdpfx Amoy Ibzljpel Suspension: leaf suspension Rear axle: Double wheels Drive: Wheel Empty weight: 7.580 kg Carrying capacity: 2.420 kg GVW: 10.000 kg Tail lift: slider lift Make of bodywork: LAMBERET

Condition: excellent (used), RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 Device Data Manufacturer: RS-Simulatoren Model: ST2K 1000 / 55 Design: Temperature Shock Chamber Cooling: Water-cooled Description Used temperature shock chamber for standardized thermal shock testing. Suitable for material, component, and reliability testing. Ideal for use in industrial, automotive, research, and quality assurance applications. System Description - 2 separate temperature chambers (hot/cold) - Automatic horizontal test basket transfer - Fast cycling for temperature shock tests Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Temporal deviation: ±0.8 K Test Chamber Volume: approx. 580 liters Internal dimensions (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Max. current: 65 A Media Connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water demand: max. 3.2 m³/h Cooling water return: non-pressurized Compressed air: NW 7.2, 4–10.5 bar Dimensions External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight Approx. 2800 kg Features Hedpfjy H Igfex Ampol - Horizontal basket movement - C-rails in the test chamber - Large test basket (>1000 mm) - Observation window - Interior lighting - SE-604 control system - Programmable operation and data logging - RS232 interface Cooling System Refrigerants: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating Data Operating hours: approx. 4,500 hrs Sound level: approx. 67 dB(A) Ambient Conditions Temperature: +12 °C to +30 °C Humidity: 25% to 75% r.h. Scope of Delivery - RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 - Delivery as illustrated Optional Pre-Delivery Service - Functional test - Refrigerant service - Leak test - Test run with report Condition Used. Condition as shown in photos. Note Used equipment, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to prior sale and modifications. Should you have any questions, please feel free to contact us.

Condition: excellent (used), RS-Simulatoren Climate Chamber KSS 600/75-10K Device Data Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KSS 600/75-10K Design: Climate Test Chamber / Environmental Simulation Chamber Cooling: Water-cooled Description Used climate test chamber from RS-Simulatoren. Suitable for temperature tests, climate tests, material, and aging tests. For use in industrial testing and measurement applications. Technical Data Hodpfx Amey H Ib Aspol Temperature range: -75 °C to +180 °C Temperature change rate: heating/cooling approx. 10 K/min Test chamber volume: approx. 600 liters Dimensions Internal (W x D x H): 840 x 840 x 840 mm External (W x D x H): 1200 x 1600 x 1995 mm Electrical Data 400 V / 3~ / N / PE Current consumption: approx. 55 A Refrigeration System Refrigerants: R404A / R23 R404A: 6.0 kg R23: 3.0 kg Weight approx. 1,400 kg Equipment - RS-Simulatoren control / operating panel - Programmable operation - Observation window - Temperature monitoring in the test chamber - Operating hours counter - Side feedthrough - Robust industrial design Scope of Delivery - RS-Simulatoren climate chamber KSS 600/75-10K - Delivery as shown Service before delivery (optional) - Functional test - Refrigerant service - Leak test - Test run with protocol Condition Used. Condition as per images. Note Used device, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to prior sale and changes. If you have any questions, please feel free to contact us.

Condition: excellent (used), ESPEC Climate Test Chamber ARS-0680-AE Device Data Manufacturer: ESPEC Model: ARS-0680-AE Year of manufacture: 2017 Type: Climate test chamber Cooling: air-cooled Description Hodpfoy H H Uhox Ampel Used climate test chamber by ESPEC. Suitable for temperature and humidity testing. Ideal for use in research, development, and quality assurance. Operating Condition Status display: STOP (ready for operation). Operating hours: approx. 5,887 hours. Technical Data Temperature range: approx. -45 °C to +180 °C Humidity range: approx. 10 – 98% RH Temperature change rate: approx. 4–6 K/min Test chamber volume: approx. 680 liters Dimensions Interior (W x H x D): approx. 850 x 1000 x 800 mm Exterior (W x H x D): approx. 1050 x 1955 x 1805 mm Electrical Data 400 V / 3~ / 50 Hz Current consumption: approx. 22–27 A Cooling System Refrigerants: R23 / R452A R23: 0.65 kg (GWP 14800) R452A: 2.1 kg (GWP 3920) Air-cooled (no external water connection required) Weight Approx. 505–615 kg Features Touchscreen control panel Program operation and constant operation Viewing window Stainless steel test chamber Interior lighting Cable ports Water tank system for humidity operation Mobile (castors and leveling feet) Scope of Delivery ESPEC climate test chamber ARS-0680-AE Documentation (if available) Service before delivery (optional) Function check Refrigerant service Leak test Trial run with log Condition Used. Condition as shown in the pictures. Note Used equipment, sold without warranty. Inspection by appointment possible. Loading and transportation can be organized on request. Subject to prior sale and changes. Please contact us if you have any questions.

Condition: excellent (used), ESPEC Climate Test Chamber PL-3KPH Device Data Manufacturer: ESPEC Model: PL-3KPH Design: Climate Test Chamber Cooling: Air-cooled Description Used climate test chamber from ESPEC. Suitable for temperature and humidity testing. For use in research, development, and quality assurance. Operating Condition Display: STOP / ready for operation. Technical Data Temperature range: -40°C to +180°C Humidity range: 20% to 98% RH Test chamber volume: approx. 400 liters Dimensions Internal (W x H x D): 600 x 850 x 800 mm External (W x H x D): 1010 x 1690 x 1195 mm Electrical Data 400 V / 3~ / 50 Hz Refrigeration System Refrigerant: R404A / R23 Two-stage cooling system Air-cooled (no external water connection required) Weight Approx. 350 kg Equipment Touchscreen control panel Programmable and constant mode operation BTHC temperature and humidity control Observation window Stainless steel test chamber Internal lighting Cable port Overheating protection Hour counter Industrial design Scope of Delivery ESPEC Climate Test Chamber PL-3KPH Scope of delivery as shown Service before delivery (optional) Function test Refrigerant service Leak test Test run with protocol Hjdpfx Aoy H H Iujmpol Condition Used. Condition as shown in photos. Note Used device, sale without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to prior sale and changes. If you have any questions, feel free to contact us.

Condition: excellent (used), CTS Climate Test Chamber C-70/600 Device Data Hsdpfxsy H H D Aj Ampjl Manufacturer: CTS GmbH Model: C-70/600 Type: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature and climate testing. Designed for use in research, development, and quality assurance. Operating Status Display: Manual operation / Stop. Temperature: 16.59 °C (actual) / 5.00 °C (set). Humidity: 39.7 % RH. Water reserve: 11.0 liters. Technical Specifications Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Cascade refrigeration unit Low temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Features Viewing window Stainless steel test chamber Digital set/actual value display Sample protection / temperature limiter Water connection (deionized water) Condensate drain Cable ports RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight approx. 600 kg Scope of Delivery CTS Climate Test Chamber C-70/600 Documentation (if available) Pre-delivery service (optional) Functional testing Refrigerant service Leak testing Trial run with protocol Condition Used. Condition as shown in the images. Note Used equipment, sale without warranty. Inspection possible by appointment. Loading and transport can be arranged on request. Subject to prior sale and modifications. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), CTS Climate Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature, climate, and stress screening tests. For use in industry, research, and quality assurance. Operating Condition Display: Manual mode / Warning (Drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Compressor pre-cooling: 11,432 h Pump circulation: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Features Observation window Hsdpfx Amey H Hmwjpsl Stainless steel test chamber CTS touch/LCD control panel Programmable operation Specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refilling possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial version Feedthroughs 1x NW 50 2x NW 125 Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1120 x 1875 mm Weight Approx. 750 kg Scope of Delivery CTS Climate Test Chamber CS-70/600-5/S Documentation / Test certificates (if available) Pre-shipment Service (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Visual condition see pictures. Note Used equipment, sale without warranty. Inspection by arrangement possible. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.