Used Biesse Rover C 6.50 Conf. 2 for sale (100,556)

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Fgjdpjugpwnsfx Aa Dsf Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, Year of construction: 2002, functionality: fully functional, Working range X 6,170 mm Working range Y 1,380 mm Working range Z 155 mm Main motor Kw7.5 kW Max rotation speed 24,000 rpm Aggregate heads 4. axis C-axis tool change positions 10 vertex boring heads 20 Horizontal boring heads X 6 Horizontal boring heads Y 2 Arm structure Work surface Console table Number of bars 10 Positioning aid Fjdpfx Aaer E A U Ie Dsgf Vacuum pump capacity 2 x 125m³/h Chip conveyor belt

Condition: good (used), Year of construction: 1997, functionality: fully functional, CNC machining center Biesse Rover 20 Year of construction 1997 Manufacturer Biesse Italy S/N 64851 Working area 2.893 x 950 mm 6 traverses with 12 vacuum cups Milling spindle with ISO 30 tool holder 3.6 kW, drilling unit: 10 vertical drills 6 horizontal drills Grooving saw, 6-fold tool changer. NC410 control unit Color screen Total power consumption 10 Kw 400 V , 50 Hz with safety fence ( not on the pictures ) 3 step mats with Becker vacuum pump, 3,0 Kw CE marked 1900 kg Fedpfx Ajtpuu Dsa Dogf

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Fgodpfx Aeh Txlcoa Djf Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: good (used), Year of construction: 2018, machine/vehicle number: 1000028154, functionality: fully functional, Equipment: rotational speed infinitely variable, The machine was commissioned in 2019, single owner. It has seen very little use. Description Useful working area, 5-axis configuration: X=3280mm, Y=1600mm Axis travel: X=3706mm, Y=2294mm, Z1=515mm, Z2=371mm Axis traverse speed: X=80m/min, Y=60m/min, Z=30m/min Electrospindle: HSD, 5 axes 11 kW, with continuous 360° rotation on B and C axes, enabling high-precision machining of complex shapes liquid-cooled Drilling head: HSD 20 vertical spindles 4 horizontal spindles grooving discs on X-axis grooving discs on Y-axis Work table: 6 cross beams Isbjwhypnjni Itxtobb 4 suction cups per beam preparation for uniclamp Tool magazines: 16-position revolver-type tool changer Fgsdpoxdl H Uofx Aa Dof Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring firm clamping of the parts during processing

Condition: excellent (used), mileage: 318,695 km, fuel type: diesel, gearing type: mechanical, first registration: 12/1994, color: white, Year of construction: 1994, Engine capacity: 2,500 cc Unladen weight: 2,080 kg Payload: 640 kg gVW: 2,720 kg Technical condition: very good Optical condition: very good Contact Thierry Leemans for further information. Fgodjywclkepfx Aa Dof

Condition: used, Year of construction: 2022, total length: 8,000 mm, total width: 2,400 mm, total height: 2,400 mm, Colour: Grey Weight: 3.969 kg Price: On request - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1000056636 - Max. cutting length [mm]: 3200 - Max. cutting width [mm]: 3200 - Transport dimensions: 8000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3969kg - Transport packages [pcs.]: 4 Fsdpfx Aoy E Hdgea Degf Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 1000056636, functionality: fully functional, cutting width (max.): 3,200 mm, total length: 8,000 mm, overall weight: 3,969 kg, cutting length (max.): 3,200 mm, TECHNICAL DETAILS Fgsdpey Nxvcjfx Aa Dsf Max. cutting length: 3,200 mm Max. cutting width: 3,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,400 x 2,400 mm Weight: 3,969 kg Supply voltage: 400 VAC Number of supply phases: 3 Power: 4 kW Frequency: 50 Hz EQUIPMENT Documentation CE marking

Condition: excellent (used), Electronic programmer NC 400 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Fsdpfx Aelwqrtja Dogf Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 27.7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Year of construction: 2001, condition: excellent (used), I sell the Biesse line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Fgsdpfxjd Iv H Rj Aa Djf Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), Year of construction: 2002, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 2002. 2 pcs. CNC drilling heads from top. 1 pcs. Grooving saw Fjdpfxjt N Rkvj Aa Degf 2 pcs. SARG Vibration dowel inserting device. 1 pc. vacuum underpressure pump Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), Year of construction: 1999, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 1999. 2 pcs. CNC drilling heads from top. 1 pcs. Grooving saw 3 pcs. 3Master vibratori Vibration dowel inserting device. Part of the BIESSE line consisting of: Fjdpfot N Hmmex Aa Degf COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: like new (used), Year of construction: 2008, I sell the throughfeed nesting CNC working centre Biesse Excel NBC 712 X1-S Year 2008. Very productive and fast. Automatic infeed table. Working area 3730x2200mm Configuration: Milling head HSK63 12kW, 1000-24000 rpm, independend Z-axis liquid cooling with the 8 position HSK63 magazine Fsdpefwvppsfx Aa Djgf 16+8+4 Drilling heads 1 Grooving saw D.150mm 2-position X/Y 1 Revolving electrospindle with cutting aggregate liquid cooling Software BiesseWorks Advanced + Biesse Nest. CD included. Pumps 3pcs. BUSCH 3x 300/360 m3/hr. Condition like new ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included.

Condition: excellent (used), Year of construction: 2001, I sell the CNC accessories inserting machine with glue spraying BIESSE COMIL INSIDER IT2G. Year 2001. 2 Stk. CNC drawers slidings inserting from top. 6 Stk. Glue spraying heads 1 Stk. Vibration accessories input device. Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. Fgsdpfxet N N Aqo Aa Dof For more photos and details please send the request.

Condition: used, machine/vehicle number: 008694, X axis working area: 4320 mm Y axis working area: 1287 mm Fodpfx Aaozqz Nxs Degf Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 16 Total number of tool changer positions: 31

Condition: used, Year of construction: 2008, input voltage: 400 V, input frequency: 50 Hz, number of slots in tool magazine: 8, Equipment: CE marking, Biesse Rover ROVER A 3.40 FT K2 CNC machining centre Description Working fields: X = 3685 mm; Y = 1290 mm; Z = 160 mm The composition includes: Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. 4 side stops equipped with pneumatic system and sensors. Vacuum tank Vacuum system for 2 300 m3/h pumps 300 m3/h rotary claw vacuum pump 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowing unit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Controls on remote keyboard Numerical Control XP600 User-friendly interface BIESSEWORKS - Advanced programming system BIESSE NEST Module Air conditioner for electric cabinet Fgodpfezqdqlex Aa Djf Inverter Safety devices with 2 mats and low fencing CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,320 mm, travel distance Z-axis: 150 mm, number of axes: 5, This 5-axis BIESSE Rover A4.30 was manufactured in 2010. It features a working field of 3,060 mm in the X-axis and 1,320 mm in the Y-axis, along with a powerful 12 kW air-cooled electrospindle. The machine includes advanced programming with BIESSEWORKS and a revolving tool changer with 10 positions. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE Rover A4.30 machine we have for sale. Contact us for further details. • Worktables and positioning: • 6 ATS panel supports, L 1,280 mm • 18 sliding bases • 6 stops with 115 mm stroke • 6 stops with 115 mm stroke positioned at 1,050 mm • 4 side stops with 115 mm stroke (2 LH + 2 RH) • 4 bar supports • 12 clamping units for narrow workpieces • 12 vacuum modules (132 × 146 × H48 mm) • 6 vacuum modules (132 × 75 × H48 mm) • Vacuum system divided into 2 work areas in X • Pneumatic system for bar supports with 2 independent work areas in X • Spindle and aggregates: • 12 kW (16.1 HP) air‑cooled electrospindle, ISO 30 tool holder • Flange for assembly of aggregates • Preparation for 360° operating unit (C‑axis) • ISO 30 aggregate with 1 spindle, manual rotation, adjustable inclination (extra equipment installed) • Tooling and drilling: • Revolving tool changer with 10 positions on X‑carriage side • Boring head BH 21 L: • 7 + 7 vertical spindles • 4 horizontal spindles in X • 2 horizontal spindles in Y • 1 saw blade in X (Ø120 mm) • BH 21 L boring head with quick‑change connections (extra equipment installed) • Drill bit holders for quick‑connection boring head spindles (extra equipment installed) • Automation and preparation: • Automatic lubrication system • Preparation for belt conveyor for chip and off‑cut removal Fgsdpfxezndf Do Aa Dsf • Preparation for multifunctional unit or horizontal routing unit • C‑axis operating device with 360° rotation and gear transmission (extra equipment installed; for machines with preparation) • Vacuum, pneumatics, electrics: • 90 m³/h vacuum pump • Auxiliary vacuum system • Blower • Inverter • Air conditioner for electrical cabinet • Control and software: • PC‑based numerical control • 19" LCD monitor • Advanced remote keyboard • BIESSEWORKS advanced programming system • RVA SLOT 1 (extra equipment) • Safety: • Safety devices with 2 front safety mats and rear/side protection • Safety devices in conformity with Regulation 2006/42/CE (Rover A 4.30) (extra equipment) Additional equipment • Manual laser barcode reader (not suitable for 2D/QR codes)

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 16.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 34 Fedpfx Aajy H Dzfj Djgf

Condition: used, mileage: 238,363 km, power: 368 kW (500.34 HP), first registration: 02/2019, fuel type: diesel, tire size: 425/65R22.5, axle configuration: 6x6, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: steel, total length: 8,550 mm, total width: 2,550 mm, loading space length: 5,100 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, Year of construction: 2019, Equipment: ABS, AdBlue, central locking, crane, cruise control, differential lock, electric window regulation, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Remote-controlled central locking - Leather interior - Tow hitch - Hub reduction - PTO - Radio - Rear view camera - Sun visor - Spotlights - Toolbox = Notes = TGS 26.500 6X6 BB Fodpfxszmc Rve Aa Dsgf Spring suspension. Hub reduction. 16-speed manual gearbox. Camera system: loading area / rear. HMF 2243 Z crane Radio - remote control. Bakker graph: BDV 100 / 100 cm. 2-way tipper. Inside dimensions: 510 cm x 240 cm x 100 cm. Hydraulic liftgate on the left side. Hydraulic top cover. Rear doors. Trailer coupling. Stainless steel toolboxes. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Tire size: 425/65R22.5; Steered; Tire tread depth left: 10%; Tire tread depth right: 10% Rear axle 1: Tire size: 315/80R22.5; Double tires; Tire tread depth left inside: 10%; Tire tread depth left outside: 10%; Tire tread depth right inside: 10%; Tire tread depth right outside: 10% Rear axle 2: Tire size: 315/80R22.5; Double tires; Tire tread depth left inside: 30%; Tire tread depth left outside: 30%; Tire tread depth right inside: 30%; Tire tread depth right outside: 30% Weights Unladen weight: 19,255 kg Payload: 8,745 kg GVW: 28,000 kg Functional Crane: HMF Interior Upholstery: Leather Financial Information Price: Upon request Identification Model number: TGS 26.500 6X6 BB / Z CRANE + 2 = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Chip and scrap conveyor belt Automatic lubrication system Remote console Safety systems in compliance with the requirements of Directive 2006/42/EC Vacuum system for 1 vacuum pump of 250 m3/h or 300 m3/h 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 floors and 24 trolleys 8 ATS L = 1280 mm decks - 24 carriages - with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for double-stroke bar lifts 6 pneumatic double stroke load aid bar lifts for uniclamp vises H=74 for workpieces up to 98 mm thick Vacuum module size 132 x 146 x H74 mm Vacuum module size 132 x 75 x H74 mm with predisposition for pins Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mm For clamping workpieces with a thickness from 40 to 98 mm 8 reference stops with 140 mm stroke positioned at a height of 670 mm from the rear stops Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mmFor clamping workpieces with a thickness from 83 to 140 mm Flange for the preparation of a 5 Interpolating Axis Operating Unit for the assembly of Aggregates *The aggregates can only be used with the Electrospindle in a vertical position *Requires the 5 Interpolating Axis Operating Unit Predisposition for deflectors with inductive or pneumatic sensor on 5-axis operating unit Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. Fgjdpfxey U Naio Aa Def Includes the heat exchanger for cooling the coolant with operating temperatures between + 5° and +40° Right deflector with pneumatic sensor for 11 kW 5-axis electrospindle Upgrade from BiesseWorks Basic Machine to BiesseWorks Advanced Machine Iron fork for deflectors with inductive or pneumatic sensor Chain tool magazine with 33 places - centre distance 120 mm Flexible front unit protection for loading unlimited Y-size (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2020, Two-section lockers, c +P, in excellent condition, with or without benches, sold individually or as a set. Double lockers: 67 units Single lockers: 6 units Fodpjzk Dzwsfx Aa Dogf Benches: 36 units

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 abrasion-resistant Fedpfx Aeyxnpdoa Dogf -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 -Quantity: 12 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc.

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm Fgsdpfsyx S N Iex Aa Dsf -Quantity: 1 piece available -Dimensions: Ø 450 x 195 mm -Weight: 31 kg

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 4 pieces -Tire size: 200/50-10 SC 10 RIM 6.50 F -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm Fgedpfx Ajyx Dyroa Djf -Delivery/Price: complete -Dimensions: Ø 450 x 192 mm -Weight: 30 kg/pc.

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 Fsdpfxsyxnbae Aa Dogf -Quantity: 24 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc.