Used Automatic Dry Vacuum Closing Machine for sale (78,272)

Condition: used, Year of construction: 2018, operating hours: 648 h, functionality: fully functional, machine/vehicle number: HR12952, fuel type: diesel, empty load weight: 922 kg, total length: 2,000 mm, construction height: 1,400 mm, drive type: Diesel, construction width: 1,260 mm, Sweeping suction machine Chassis number: HR12952 Iaodpfxexnt Tks Aa Ieu Condition: Ready for use and fully functional Technical condition: normal Description: Equipment: Front lighting, rubber bumper kit, sweeping roller PPL/wire, side brushes PPL/wire mix, power steering. Machine fully workshop-tested, cleaned, with new UVV inspection and maintenance completed.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Showroom machine from the manufacturer! Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Calendar collating machine Type - MKW RAPID UT - System Belt conveyor table 20 - Number of stations B3 - Format 35 x 50 cm / 13.78" x 19.68" GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 20 stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - Sheet sizes 3.94" x 5.51" up to 13.78" x 19.68" - High-Pile version with max. 70 cm / 27.55" stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Clocked blown air for accurate sheet layering - Electronically adjustable sheet layering - Electronic machine control by Industry-PC system - High quality 15'' color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Delivery control system for criss-cross with adjustable set interval - Transport table lighting with LED-Lamps - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PC - Ejector unit inclusive additional station at the delivery AW 3 incl. Iaedpfxsy U Hdlj Aa Iou (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated DSS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - LED signal lights to visualise the information of each station SOFU-HIVIS incl. (enables simple status detection) Alternative to Jogger: 1 High-Pile delivery Type MKW RAPID HA 350-UT / PN + T-BELT - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Pneumatic drive unit for staggering of sets - Automatic delivery on to buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Subject to prior sales Detailed offer on request

Condition: used, Year of construction: 1996, workpiece length 55- 170 mm work piece width max. 28 mm workpiece height max. 27,5 mm milling motor 2 cut-off saw 1 Ijdpsy Ty Hqsfx Aa Ieau Special machine APK automatic sawing and milling machine for cutting wooden blocks to length and then milling them. Special design for the production of cutlery tray inserts (see pictures) or similar workpieces. Work sequence: 1. feeding the material from the magazine 2. cutting (sawing) to the desired length 3. milling of the cut workpieces 4. ejection of the finished part.

Condition: used, Year of construction: 2011, operating hours: 6,763 h, functionality: fully functional, Sweeper-scrubber machine Technical condition: good Transmission: Hydrostatic; Front tires: 2 x superelastic; Rear: 1 x bandage wheel; Power steering; Front windshield; 2 x front/ StVZO-like AS; Overall height ready to operate: 2300 mm Isdpfx Aasukrcpj Isau

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Iaedod N H A Nepfx Aa Iju Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Ijdpfxeupbf Do Aa Ijau Good condition

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Iaodpfodzp T Nsx Aa Iou Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Iaedpfx Aopu R Nvja Ieu Weight 390 kg Good condition

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Iajdpfxsfh R Tuj Aa Ieu Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Ijdpfx Aefibd Tsa Ioau Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Iaodpfx Aasfibfaj Isu Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW Ijdpfxjfh R Tyj Aa Ieau

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display Iaodpfoxdr Rtex Aa Iju

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Iodpexdr Swsfx Aa Ieau Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. The machine has seen very little use, is fully operational, and is in good overall condition. Manual and original documentation are available.

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 2024-A00280, feed length X-axis: 10,000 mm, feed length Y-axis: 4,000 mm, feed length Z-axis: 100 mm, warranty duration: 12 months, total length: 11,000 mm, total height: 2,000 mm, total width: 4,500 mm, overall weight: 2,500 kg, type of input current: three-phase, Equipment: CE marking, Semi-automatic framing machine for timber frame walls, max. 4000x10000mm - Max. stud height: 220mm - 3 nailing positions along the height - 2 BEA nail guns, strip-fed nails - Wall length production: 1000mm to 10000mm - Wall width production: 600mm to 4000mm - Wall height production: 120mm to 220mm - 2 independent nailing stations (no beams) - HIWIN rail and guide system - LENZE motor - LENZE PLC - Human-Machine Interface (HMI) - Control panel - Manufacturer's warranty: 12 months - Installation and commissioning possible Iaedpfezap I Aex Aa Iou

Condition: excellent (used), Otto Kremmling type oka Automata 600/7 Marzipan depositing and forming of soft mass. 25 kg blocks of Marzipan are put in squeezed through the roller and into the dies forms then goes into cooling system. Iedpfxsylbz Ss Aa Ioau

Condition: good (used), Code: 0749 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TT 3 1300 Automatic sanding machine for worktops, furniture, panels, tables Technical data: Working width mm 1300 Max working thickness mm 130 Min working thickness mm 1 Composition: 1° Transversal belt - Motor Hp 15 - Electronic speed variator with display Iaedpfx Aeh T Dzqja Isu 2° Transversal belt - Motor Hp 15 - Electronic speed variator with display Transversal sanding belt size mm 1350 x 150 Chevron belt size mm 5510 x 140 Belt blowers Belt feed speed mt/min 5/25 Fixed table and mobile head for on-line set-up Panel cleaning rotary blowers Vacuum table Belt cleaning brush Infeed roller conveyor Installed power Kw 32 Compressed air 7 Atm Suction inlets: n° 2 diameter mm 200 - n° 2 diameter mm 150 - n° 2 diameter mm 100 Overall dimensions mmm 4400 x 2500 x 1600 h Weight kg 5000

Condition: good (used), Year: 2005 Equipment: Max. size 320 x 420 mm Min. size 75 x 150 mm Speed: Max. 10,800 cycles/hour Number of stitches: Standard 11 Iedpfovp Rw Tex Aa Ijau Power requirements: 6 kW (220/380V, 50Hz) Air requirement (6 bar): 200 m³/h Width: 2730 mm Depth: 1800 mm Weight: 3000 kg (approx.) Equipment: Fully automatic book sewing machine • Automatic feeder • 4 upper and 4 lower signature openers • Computer program • Thread cutting device Condition: Very clean, in excellent working condition. Machine was refurbished in 2024.

Condition: good (used), Year of construction: 2010, machine/vehicle number: 2005, Automatic Perforating & Creasing machine Ijdpsy Txkbofx Aa Ieau

Condition: used, Used automatic shot blasting machine from KF Strahltechnik for sale. The machine is designed for the automatic shot blasting of profiles, sheet metal, and steel structures. Thanks to the 4 impeller wheels/turbines, the machine is suitable for efficient processing of the upper and lower surfaces of the workpieces. The machine is in good condition and is currently in operation. An inspection and test run at our facility are possible by arrangement. Technical data: Manufacturer: KF Strahltechnik Machine type: Automatic shot blasting machine Number of turbines: 4 Maximum workpiece width: 800 mm Maximum workpiece height: 400 mm Suitable for: Profiles, sheet metal parts, steel structures, and similar workpieces Processing: Shot blasting of the upper and lower surfaces Roller conveyor at the front: approx. 6 m Roller conveyor at the rear: approx. 6 m Condition: Good, currently in operation Inspection: Possible at the factory Test run: Possible by arrangement Delivery and sales conditions The stated price is the ex-works price for self-collection. Dismantling, loading, transport, and assembly/commissioning at the new location are not included in the price and can be offered separately if required. The machine is sold used and in its current condition. An inspection and examination before purchase are expressly possible. ✅ Automatic KF Strahltechnik shot blasting machine ✅ 4 turbines / impeller wheels ✅ For profiles and sheet metal parts up to 800 x 400 mm Isdpjkw Ukusfx Aa Isau ✅ Roller conveyors at the front and rear, each approx. 6 m ✅ Currently in operation and in good condition ✅ Inspection and test possible at the factory ✅ Price ex-works, dismantling and assembly optional at an additional cost

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Designed for flexible packaging of industrial food products, chemicals, powders, granular materials, frozen foods, snacks, dried fruits, rice, pasta, coffee, cereals, legumes, sugar, salt, flours, pet food, pellets, fertilizers, and other similar products. High productivity, great versatility, and a maximum speed of 60 bags per minute when working with bags that are 40 to 250 mm wide and up to 400 mm long. Accepts film, PE, composite films, heat-sealable paper, and recyclable film. Incorporates a PLC with an OMRON touch screen, software control, Ethernet and WiFi communication, peripheral integration, and SCADA connection capability. Features a vertical and horizontal sealing system, servomotor, encoder, photocell, toothed blade, Linatex belts, round, oval, or rectangular forming tubes, and an IP65 electrical panel. The machine includes a feed conveyor belt and an output conveyor belt, operates at 400 V with a three-phase power supply and an installed power of 1.5 kW. Maximum power consumption is 7 kW, and compressed air consumption is 50 to 150 l/min. Dimensions are 1950 x 1240 x 2020 mm. Isdpoy Ui Dnefx Aa Isau

Condition: used, machine/vehicle number: 008606, Max. panel width: 3000 mm Iajdpfx Aaozcmpcs Iju Max. panel length: 1000 mm No of Bottom Units: 5 No of Top Units: 2 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008607, Max. panel width: 3000 mm Max. panel length: 1000 mm No of Bottom Units: 6 Iaodpfx Aszcmn Eea Iou No of Top Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: good (used), Multigraf Touchline C-375 Automatic Creasing Machine This machine is in very good condition and fully functional. Purchased from a small digital printing house. Year of manufacture: 2014. This is the most efficient creasing system on the market, featuring a robust design. Made in Switzerland. Can be connected to the Multigraf Touchline TF-375 folding machine. Controlled via a touchscreen color monitor. Technical specifications: Maximum sheet size: 375 x 660 mm Min. sheet size: 105 x 148 mm Ijdpfxjzdavlj Aa Ijau Maximum speed: 6000 sheets/h Material weight: 80-400 GSM Power supply: 230 V Weight: 180 kg

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Iasdpfx Aaozdar Hj Iju Dimensions: 1500 x 750 x 1200 mm