Used Atos Pfed-43056/022/1Dto for sale (929)

Year of construction: 2024, condition: new, Make: DURMA Type: AD-R 30220 bending length: 3050 mm Press force: 2200 kN Control: CNC DT-10 Operating hours: 0 h Controlled axes Backgauge: X,R passage between the uprights: 2600 mm stroke length: 265 mm Installation height: 530 mm table width: 104 mm table height: 900 mm Stands projection: 410 mm travel range X-axis: 650 mm traverse speed X-axis: 250 mm/s Infeed speed: 140 mm/s folding speed: 10 mm/s retraction speed: 140 mm/s Dimensions L/W/H: approx. 4250x1770x2900 mm Weight: approx. 12250 kg Standard equipment Y1,Y2, X=650 mm Ijded Srk Eepfx Amietg Control: CNC DT-15 European tool clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guidance along the entire length Backgauge motorized with linear guide & ball screw Backgauge finger height adjustable Back stop motor Servo Safety covers lateral CE Marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC-B-C+ safety cover & switch Controlled axes X,R-axis, Z-axis manually adjustable Quick clamping CNC controlled motor-driven crowning The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Year of construction: 2024, condition: new, Bending performance 2200 KN Bending length 3050 mm Continuity betw. d. stands (mm) 2600 mm Stroke length (mm) 265 mm Throat depth 410 mm Iodpfx Amod Afxksijtg Height 530 mm Operating speed (mm/sec) Y 10 mm / sec Motor power 18.5 KW Operating speed (mm/sec) X 500 mm / sec Operating distance R (motor operated) 350 mm length 4250 mm Width 1700 mm 2750 mm Weight 11500 kg Standard equipment: Y1, Y2, pressure beam - axes (individually controllable) X, R - axes CNC controlled. Control unit - CNC ModEva 15t Servomotor back gauge & linear ball circulation spindle system with Rails (x-R) (AL) CNC controlled crowning European tool clamping system Mobile support arms (with T-slot and stopper) Specially designed hydraulic block and valves for worldwide standard electrical equipment according to global standard Special Accessories: Control DELEM DA-66T (2D graphic, 3D visualization) Bend - 66.5 (one) = upper tool H thereof in pitch bend - lower 4V that (one of them in Division) D-bend 3D CAD /.

Condition: ready for operation (used), Philips 4022 228 3020 Input Out Board, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Isdpfx Amoi Ecipsijtg

Condition: ready for operation (used), Philips 4022 228 3020 Input Out Board, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Itsdpfx Aei Ecitsmiog

Condition: ready for operation (used), Philips 4022 228 3020 Input Out Board, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Itjdpfei Eciwsx Amieg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 9,356 h, punching force: 31 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,254 mm, travel distance Y-axis: 1,263 mm, CNC punching machine manufactured in 2019. This Euromac MBX 6 Plus 1250/30-2250 features a total of 24,439,006 hits and a total working time of 11,309 hours. It includes a CNC control system with a dedicated console and a brush table to prevent sheet scratching. If you are looking to get high-quality punching capabilities, consider the Euromac MBX 6 Plus 1250/30-2250 machine we have for sale. Contact us for further details. Itodpfjy Sar Djx Amisg - Total Hits: 24,439,006- Total Working Time: 11,309 hours- Actual Punching Time: 4,708 hours- Control System: CNC with dedicated console and Logitech keyboard interface- Multitool Setup: Station 2, Code 1 (6MT01)- Oil Temperature: 22 °C- Power Supply: 50 Hz- Bed Type: Brush table to prevent sheet scratching

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor Available immediately Benefits: + Special rotor with reduced knife protrusion, suitable for hard and soft materials + 22 kW motor + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour *Rate depends on screen size and material. Significantly higher throughput with smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or according to agreement (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Suction connection Ø 200 mm Feed opening: 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: plant color may differ Weight: 1920 kg Standard scope of delivery includes: - Control cabinet with PLC control - Automatic star-delta start - High-speed hydraulics - Auto shut-off when rotor is idle - Speed 70–90 rpm for high throughput - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at an additional cost: - Increase shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net Itsdpfx Aex Af Rdomisg - Control system for conveyor belt and overband magnet + €2,750 net (start and stop synced with shredder) - Enlarged hopper attachment 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Feed must be free from metals and mineral contaminants. Tool damage and/or increased wear may result otherwise.

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: 0372PO183, Model: JSO-IV-40-22TF Year: 2006 Itodpfx Amjy Icgieisg Serial number: 0372PO183 Stock number: 1180G Belt width: 40 inch, 1010 mm Heating: thermal oil, 2 x 460kW Steam: max 2 x 545 kg/hr Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 63kW Dimensions: 22500 x 3000 x 3000 mm Automated cleaning in place (CIP): Continuous hot water, single pass, belt washer with Stein Humitroll moisture monitoring and control.

Condition: new, Axesta Grossenbacher 50 50 630 SN:910221002, unused in opened original packaging, 100% functional, scope of delivery as per photos Iodpfx Asi D T Auomiotg

Condition: new, Fanuc A06B-6124-H102 Servo Amplifier Module SN:V02260242, unused in opened original packaging, 100% functional, scope of delivery as per photos Itedpfx Aji D Uzcomisg

Condition: ready for operation (used), Indramat TVM 2.1-50-220/300-W1-220/380 AC. Servo Power Supply, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Ijdoi Ebrgepfx Amietg

Condition: ready for operation (used), Kadia Unipos SPK 2000.40 EAU0100022 uer. + Analog SN 47302ETG, used, good condition, 100% functional, scope of delivery as per photos Itjdpfxei Ebvgs Amieg

Condition: ready for operation (used), Philips 4022 226 3632 LM / RM DRIVE MOD card, E status and serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Itjdpoi Echgsfx Amiog

Condition: ready for operation (used), Indramat KDV 2.2-100-220/300-220 Power Supply, serial no. according to photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Ijdpfxoi Ebi Uo Amistg

Condition: ready for operation (used), Fanuc A06B-0223-B100 AC servo motor, serial number: C159W03B5, without pulsecoder / Speed: 4000 rpm, 267 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Itsdpfx Aoy Nn Ubsmijg

Condition: ready for operation (used), Lenze DFVARS 080-22 servomotor SN: 0237186 with A2S 107-AA01-31 fan, used, in good preserved condition, 100% functional, delivery as per photos Itjdpfsy Npgrsx Amieg

Condition: new, Röhm RPP-125-1 / GA parallel gripper LA82x45 Id.170022 SN:B7952 ,unused in opened original box, 100% working, scope of supply according to photos Itjdpfei Ec Duox Amijg

Condition: ready for operation (used), Kadia Unipos SPK 2000.40 EAU0100022 uer. + Analog SN 47301ETG, used, good condition, 100% functional, scope of delivery as per photos Itedpfxsi Ebvco Amisg

Condition: ready for operation (used), Kadia Unipos SPK 2000.40 EAU0100022 uer. + Analog SN 47303ETG, used, good condition, 100% functional, scope of delivery as per photos Isdpfx Aji Ebvkemijtg

Condition: ready for operation (used), Siemens 1FK7042-5AF71-1EG5 synchronous servo motor SN:YFR123002201017, used, normal signs of use, 100% functional, scope of delivery as per photos Itsdpfx Amsi D Rhceiog

Condition: ready for operation (used), Philips 4022 226 3652 RM DRIVE MOD card, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Iodpfxoi Ech De Amistg

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 Controller SN:23450022128, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Iedpfx Aoi Ebncomietg

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 Controller SN:23450022133, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Itedpoi Ebngofx Amisg

Condition: new, Röhm RPP-125-1 / GA parallel gripper LA82x45 Id.170022 SN:Z6653 ,unused in opened original box, 100% working, scope of supply according to photos Itodpfei Ec D Ajx Amiog

Condition: ready for operation (used), Philips 4022 226 3632 LM / RM DRIVE MOD card, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ijdsy Nrzxspfx Amijtg