Used Ammann Loading Silo 200 for sale (40,479)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Cedpfx Aswc Rk Eegkoha Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: used, 200 linear meters of Pallet Racking – Schäfer Palflex Used, in good condition, see photos. Height: 6.5 m Depth: 110 cm, galvanized Field load: 24,000 kg Beam length: 4.1 m, orange Beam load capacity per level/bay: 3,000 kg Negotiable price: €17,900 net ex warehouse The offer includes: + 49 units of frames, pre-assembled, depth 110 cm, height 6.5 m + 288 units of beams, length 4.1 m, 3,000 kg load capacity per level/bay + 576 units of safety locking devices + 196 units of concrete anchors Used corner protectors are immediately available, surcharge per piece: €15 net! Load capacity signs, documents, etc. are, of course, included. Further accessories can be found in the accessories catalog. The goods are in stock. Transport and assembly are possible upon request. Inspection can be arranged at any time. Further information upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes, errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions; all prices exclude VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used and new heavy-duty racking Description text: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) Cedpfsvfnnzjx Agkeha • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock, including a clean sweep clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and clean sweep handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / a heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), Staircase clamp (28366) Clamping height 200 - 250 mm T-slot width 12 mm Clamping screw M 10 4 pieces available Weight 8.5 kg Csdpfx Ajln Ulaogkeha

Condition: excellent (used), I am offering for sale a high-quality RÖHM KFD-HS 200/3 hydraulic lathe chuck, designed for professional CNC lathes. The chuck is in very good technical and visual condition. It looks practically new and appears to have been used only a few times. The working surfaces and guides show only minimal signs of use. The set includes: * RÖHM KFD-HS 200/3 lathe chuck, * 3 standard jaws, * 3 RÖHM 538-55 top jaws, * operating wrench, Codpfxozlaqks Agkjha * sturdy wooden transport box (I am not sure if this is the original box for this chuck). Technical data: * Manufacturer: RÖHM * Model: KFD-HS 200/3 * Diameter: 200 mm * Type: hydraulic 3-jaw lathe chuck * Maximum clamping force per jaw (Fmax): 48 kN * Total clamping force (Fges): 110 kN * Maximum rotational speed: 6500 rpm * Identification number: 155099 * Top jaws: RÖHM 538-55 * Country of manufacture: Germany The chuck is ideal for professional applications in machining and working on CNC lathes. It is a robust piece of equipment from the renowned German company RÖHM, which is valued for its high quality and precision.

Condition: excellent (used), functionality: fully functional, POSITECTOR 200: Positector-200 Coating Thickness Gauge for Wood, Concrete, and Plastic The Positector-200 Coating Thickness Gauge for Wood, Concrete, and Plastic offers 3 measurement ranges, and all 3 versions are available in Standard or Advanced models: PT-200B: 13 - 1000 microns PT-200C: 50 - 3800 microns PT-200D: 50 - 7600 microns The PosiTector 200 non-destructively measures a wide variety of applications using ultrasonic technology. It measures coating thickness on wood, concrete, plastic, composites, and more. Advanced models measure up to 3 different layer thicknesses in a multi-layer system and feature a graphical display for detailed analysis of the coating system. Simple: Ready to measure - no adjustment needed for measuring most coatings Enhanced one-handed menu navigation Flashing screen - ideal in a noisy environment The RESET function instantly restores factory settings Durable: Resistant to solvents, acids, oils, water, and dust - waterproof Scratch-resistant screen suitable for harsh environments Shock-absorbing rubber protective housing with belt clip 2-year warranty on the gauge and probe Accurate: Calibration certificate (long version) showing NIST traceability included Sensitive sensors provide fast and accurate readings (up to 40 readings/minute) Proven, non-destructive ultrasonic technique complies with ASTM D6132 and ISO 2808 standards Versatile: High-contrast backlit display for dark or bright environments Interchangeable Mils/Microns units Selectable languages Chodpfx Agjzif Rdokoa Reversible display for right-side viewing Uses alkaline or rechargeable batteries (integrated charger) Powerful: Statistics - continuously displayed, updated average, standard deviation, min/max thickness, and number of thickness readings USB output for simple and fast connection to a PC and continuous power supply. USB cable included. PosiSoft solutions for data visualization, analysis, and communication: PosiSoft USB drive - stored measurements and graphs can be accessed using universal PC/Mac web browsers or file explorer. No software required PosiSoft.net account - a free online application offers secure storage of thickness readings PosiSoft software - Continue to use the familiar desktop software you've used for years. Available for free download. PosiSoft Mobile -(only in Advanced models) - access updated readings, graphs, photos, and notes via WiFi-enabled devices such as tablets, smartphones, and computers Screenshot - records and saves the image in the USB flash memory for record-keeping and review Each stored measurement is marked with the date and time Software updates via the internet

Condition: refurbished (used), Year of construction: 2015, Durst P10-200 printer with Corrugated Option Fully automated feeder and stacker Resolution: 10 pl – 1000 dpi Cedpfx Agey Amckokoha Colors: 6C + (optional White) Very low mileage Speed: up to 2025 m²/h Fully automatic loader (feeder) Fully automatic unloader (stacker) INK: Paper and board with very low odor Options: Corrugated Option with 2 screens to lower the material Corrugated static bar for different material thicknesses Corrugated software to control media and thickness - Understatic bar and automatic media stop in case of a collision - Caldera RIP software

Condition: excellent (used), WEBO 4-Headed Table Multi-Spindle Drill 4×0.75 kW 200–3000 rpm Cedpfx Agszkmfxskoha

Condition: used, mileage: 199 km, power: 338 kW (459.55 HP), fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 3,950 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,400 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, traction control, trailer coupling, = Additional Options and Accessories = - Remote-controlled central locking - Refrigerator - Lift axle - Air suspension - Fifth wheel coupling - PTO - Radio - Reversing camera - Disc brakes - Sun visor - Spotlights - Toolbox = Notes = Access to zero-emission zones until at least: ! Scania G460 XT 8x4*4 Liftable and steered trailing axle. 10,000 kg front axle, leaf-sprung. GVW: 37,000 kg. Automatic transmission with overdrive. AdBlue tank: 80 liters. Diesel tank: 395 liters. Engine PTO. Ringfeder fifth wheel coupling, 40 mm. Refrigerator. Stainless steel toolbox. Cargo net. Palfinger superstructure. Crane: Palfinger Epsilon Q200Z95TR Radio remote control. High-level control with levers. High Power Lifting System (HPLS). Short main boom with knee joint system and 1 m extendable main boom. Container system: Palfinger HT 24 TEC 25,000 kg System length: 585 cm. Maximum container length: 595 cm. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steered; Tire tread depth left: 100%; Tire tread depth right: 100%; Suspension: Leaf spring Rear axle 1: Tire size: 315/80R22.5; Twin tires; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100%; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100%; Suspension: Air suspension Rear axle 3: Tire size: 385/65R22.5; Steered; Tire tread depth left: 100%; Tire tread depth right: 100%; Suspension: Air suspension Weights Unladen weight: 16,804 kg Payload: 20,196 kg GVW: 37,000 kg Functional Crane: Palfinger Financial Information Price: On request Identification Model number: G460 8x4*4 XT / PALFINGER EPSILO = Company Information = Cedszb A Hbspfx Agkeha ALL PRICES ARE NET FOR EXPORT, (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information, but no rights can be derived from the information provided in the texts.

Year of construction: 2023, condition: excellent (used), Invoice: I issue a VAT invoice Brand: unbranded Type: hydraulic pump Model: Type- CBL 50-200/200 Cjdpfxey Amumj Agkeha Manufacturer code: 2 Packaging condition: no packaging

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Max stroke 215mm Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Csdpfjgkgwfsx Agkeha Hydraulic crowning Hydraulic tool clamping Fully serviced by Bystronic Uk from new One owner from new Low hours in good working condition

Condition: excellent (used), Year of construction: 2020, General Description For sale: 6 hydraulic presses, model YL32-200. These are robust four-column presses, ideal for metal forming, pressing, stamping, bending, and general industrial uses. The machines were originally imported from China and are based on the widely used Y32 series, ensuring easy maintenance and worldwide availability of spare parts. ⸻ ⚙️ Technical Specifications (typical for YL32-200) * Press force: approx. 200 tons * Construction: 4-column hydraulic press * Stroke: approx. 400 – 700 mm * Table size: approx. 700 x 700 mm – 1000 x 1000 mm * Daylight (max. opening): approx. 800 – 1200 mm * Hydraulic pressure: up to 25 MPa * Motor power: approx. 7.5 – 15 kW * Control system: manual / semi-automatic * Power supply: 380V / 50Hz (industrial standard) * Weight per machine: approx. 5 – 8 tons ⸻ 🏭 Applications * Metal forming & stamping * Deep drawing * Straightening and pressing * Plastic forming * Workshop and industrial production ⸻ 📦 Condition * Used condition * Sold as is / ex-works * Inspection possible by appointment ⸻ 📊 Availability * Quantity: 6 machines available * Sale as single units or as a package ⸻ Chjdjy E Abnopfx Agkea 🚛 Logistics * Location: Germany * Loading possible (forklift or crane required depending on configuration) * International shipping can be arranged * Price per unit!! * Dismantling by buyer!! * Alternatively, dismantling can be organized at an additional cost!

Condition: good (used), machine/vehicle number: 10126A56417, power: 132 kW (179.47 HP), rotational speed (min.): 1,490 rpm, input voltage: 400 V, input current: 228 A, overall weight: 1,020 kg, total length: 1,200 mm, total width: 800 mm, total height: 1,100 mm, AMMANN motor, type SEV-315M4 Technical specifications: Model: SEV-315M4 Manufacturer: AMMANN Rated power: 132 kW Operating voltage 50 Hz: 400 V Chedpfott Auuox Agksa Nominal speed: 1,490 l/min For further details see pictures & type plate Condition: Used, reconditioned stock item. Scope of delivery: 1 Euro pallet with 1 motor

Condition: used, Year of construction: 2022, Bobcat HP50.75 hydrostatically driven vibratory plate. Machine weight: 350 kg Length of base plate: 450 mm Machine length: 900 mm Machine length with handle: 1,600 mm Chjdpfxjzkz Tks Agkoa Machine height: 820 mm Handle height (working): 1,000 mm Handle height (transport): 1,500 mm Machine width: 450/600/750 mm Engine: Hatz Supra 1D50S Fuel: Diesel Engine power at RPM: 7 kW at 3200 Max. vibration frequency: 70 Hz Max. centrifugal force: 50 kN Gradeability: 36 % Amplitude: 1.7 mm

Condition: used, Year of construction: 2023, ---- 3 units available. Ammann reversible vibratory plate compactor APR 40/60 Equipment ID: 100563147 Year of manufacture: 2023 Ammann reversible vibratory plate compactor APR 40/60 Equipment ID: 100563148 Year of manufacture: 2023 Data: Chedpfezkzzbjx Agkoa Engine: Hatz / Diesel Machine weight: 284 kg Compaction width: 600 mm

Condition: used, Year of construction: 2022,

Condition: used, axle configuration: 3 axles, first registration: 04/2011, loading space volume: 60 m³, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Year of construction: 2011, Tyre size: 385/65R22,5 Suspension: air suspension Drive: Wheel Chodswtdzxopfx Agksa Empty weight: 6.120 kg Carrying capacity: 32.880 kg GVW: 39.000 kg Make of bodywork: SPITZER Number of compartments: 5

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Chedpfx Ajud R T Sjgkja

Condition: excellent (used), Professional plate compactor from the renowned brand AMMANN. Model AVP 2920 is equipped with a reliable HATZ Diesel engine with 5 kW of power. This machine is intended for professional paving, roadworks, and compaction of soil, paving stones, bedding, and asphalt. The unit is fully mechanical with a robust German construction. Visual condition as per the photos – normal signs of use. Technical data: • Manufacturer: AMMANN • Model: AVP 2920 • Year of manufacture: 1999 • Engine: HATZ Diesel • Engine type: 1B30-6 • Power: 5 kW • Operating weight: 190 kg • Manual start Cjdpfsy Sifyjx Agkoha • Made in Germany Applications: • Compaction of paving stones • Paving works • Road construction • Soil and bedding compaction • Excavations and foundations Condition: Used machine, complete. HATZ engine – a durable and highly regarded diesel unit

Condition: new, KSB Centrifugal Pump ETANORM SYT ETNY065-040-200 NEW 2024 25.6 m3/h 46 m For sale: high-quality centrifugal pump from the renowned German manufacturer KSB, model ETANORM SYT ETNY065-040-200. The unit is brand new, unused warehouse stock, in original KSB packaging. Perfect for industrial applications in water installations as well as heating and cooling systems. TECHNICAL DATA Manufacturer: KSB Model: ETANORM SYT ETNY065-040-200 Capacity Q: 25.6 m³/h Head H: 46 m Rotational speed: 2,950 rpm Impeller diameter: 187 mm Casing material: EN GJS 400 15 Year of manufacture: 2024 Flange connections CONDITION New, unused, warehouse stock May have minimal storage marks Original KSB packaging APPLICATIONS Industrial installations Water circulation pumps HVAC systems Csdpfxoywu Uqs Agkjha Heating and cooling installations Pumping stations

Condition: used, mileage: 1,001 km, power: 3 kW (4.08 HP), gearing type: other, fuel type: diesel, color: yellow, empty load weight: 111 kg, first registration: 01/2006, Year of construction: 2006, driver cabin: other, Vehicle location: Bovenden, Hatz diesel engine! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to change, prior sale, and errors! Csdpfx Asxy Sw Sjgkeha

Condition: excellent (used), Year of construction: 2006, Viessmann Vitorond 200 Output: 160 kW Burner: Weishaupt oil or gas burner available upon request Viewing by prior telephone arrangement only! Chedpjmnqc Hofx Agkea Preferred sale to dealers, tradespeople, or for export. All information is provided without guarantee; errors and prior sale excepted. The seller accepts no liability for typing or data transmission errors. We will, of course, handle all formalities Loading possible

Condition: excellent (used), Year of construction: 2016, Viessmann Vitocrossal 200 Type:CM2 Year: 2016 Output: 311Kw Мы говорим по русски! Viewing please only by telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Chodstu Truopfx Agkoa Loading possible

Condition: used, Year of construction: 2003, Used steam boiler Manufacturer: Viessmann Type: Vitomax 200 Year of manufacture: 2003 Rated thermal output: 375 kW Boiler water content: 1400 l Operating overpressure: 8 bar Chodpfx Agsfm E Ifekja Gas burner Weishaupt G/1E - ZMD-LN version Output: 80-550 kW Year of manufacture: 2003 Connection pressure: 15-500 mbar With existing Dungs DN40 fittings Мы говорим по-русски! (We speak Russian!) Please arrange inspections by phone only! We prefer to sell to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typing or data transmission errors. We would be happy to purchase your used boiler or burner! Of course, we will also take care of all formalities. Loading possible.

Condition: excellent (used), Year of construction: 2014, Viessmann Vitoplex 700kw Year: 2014 Type: SX2A Output:700Kw Chsdpfx Agetu T I Uekja Viewing only by telephone arrangement! Preferential sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: ready for operation (used), * Brand: Ammann * 1x: A-A length = 12.500 mm, Beltwidth: 650 mm * Driving: drum motor 5,5 kW. Chsdpfx Aoywnagegksa * 1x: A-A length = 43.000 mm, Beltwidth: 650 mm * Driving : gearbox 15 kW.