Used 1988 Bobst Spo 1600 for sale (5,574)

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS Hfjdpfx Ajxl Talofhok B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, BOBST PHARMA 36 folding and gluing machine Year of manufacture: 2001 on plate EDIGRAPH S.A. Hjdpfoubztkex Afhofk Factory number: no nameplate Glue system: on the wheel - 1 pt. Pena technical documentation Machine connected, possibility of testing. Condition: very good

Condition: as good as new (ex-display), Year of construction: 2015, functionality: fully functional, saw drive: 380 W, PRIMULTINII SIF 1600 band saw, in very good working condition. Hfedpfoyha A Tox Afhsk

Condition: ready for operation (used), Maximum material height: 80 mm Hedpewma Hkjfx Afhofk Table dimensions: 2000 x 1000 mm Arm clearance: 1600 mm Motor power: 0.75 kW

Condition: excellent (used), Year of construction: 2014, • Substrate width : max 430mm Hedpsv Tzhqefx Afhsfk • 8 Flexo Printing Unit • (Fully servo driven: double servo motors on print cylinder and impression roller) • 8 UV dryer • Temperature Control • Driven Chilled Drums • Chilling unit • Front load unwinder with motorized roll lifting • Unwinder with magnetic particle clutch (max. reel diameter 1.000 mm.) • Automatic Web Guide • Video inspection with manual camera movement • Servo Infeed group • 2 Die-cutting stations (male-female die-cutting possible) - servo • 1 Gap Master • Waste matrix rewinder diameter : Snowball 605mm • Servo Outfeed • Organizer (includes crane to remove and store die-cutting tools) • 3 Web break detectors • 3 antistatic bars • Motorized rewinder (max. reel diameter 1.000 mm.) • Local touch screen panel on each printing and die-cutting station • Main touch screen panel (PC MHI) • Direct Internet Connection for remote SW and HW service and upgrades • Automatic pre-register, register and tension control • Vario™ - Servo driven infeed and outfeed (includes 2 active load cells) • GIDUE mark-to-cylinder ARC register control • Servo driven die-cutting units (1 servo motor per unit) • Second pass register control • Print Tutor™ An "intelligent" camera automatically detects print register and pressure marks and performs completely automatic register adjustment, during the set-up and during production. It includes additional servo motor for lateral register adjustment (lenght register adjustment is built in servo driving motor of the print cylinder. • Delame/Relam 2K • Turn bar • Lamination and cold foil • Corona treater • Web Cleaner •

Condition: ready for operation (used), Year of construction: 2006, Bobst SP102-BMA Foilmaster Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Hedpfxjwgz Rkj Afhsfk Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: excellent (used), Year of construction: 1987, Universal non stop Feeder In line pile preparation 4 fron lays Pull guide OS 16 INDEPENDENT HEATING ZONES Honeycomb Leteral guiding device for foil Motorized foil tension, air cooling Size 102x72 cm Hjdpfxjvyn Tts Afhefk Min size 40x35 cm Speed with hot stamping 5000 per hour max Speed for die cutting 7500 per hour max

Condition: ready for operation (used), Year of construction: 1985, Bobst SP 102 CER - Perfect condition available immediately Year 1985 Max.Size: 1020x720 mm Min.Size: 400x350 mm Max.Speed: 8000 Sh/h Max. Cutting force: 250T Paper: min. 80 gr/qm Hjdpfx Aowathhjfhefk Cardboard: max. 2000 gr/qm Centerline Feeder Non-Stop Autom. Non-Stop with Sheet inserter Side guide Quick Lock system

Year of construction: 1968, condition: ready for operation (used), AUTOPLATEN BOBST SP 1260 E / AUTOMATIC FLATBED DIE-CUTTER STRIPPING / Year Of Production: 1968 / Max. Sheet Size: 1.260 x 920 mm / Min. Sheet Size: 500 x 350 mm / Maximum Speed: 5.000 Sheets Per Hour / Max. Solid Board Thickness: 1,5 mm / Max. Corrugated Board Thickness: 3 mm / Maximum Cutting Pressure: 500 Tons / Weight: 19 Tons / Main Dimensions: 6.075 x 2.840 x 2.200 mm Hjdpfx Asx R R R Usfhofk

Condition: ready for operation (used), Year of construction: 1989, MACHINE: BOBST Domino 85-M Manufacturer: BOBST SA Model number: Domino 85-M Machine type: Folder-gluer Year manufactured: 1989 Machine Format: 850 x 800mm Technical Specifications: Convertible stock Solid up to 700 g/m2 Corrug. up to B flute Thickness 15 mm Sizes: standard boxes (blanks open) Width max 850 mm Width min 56 mm Length max 800 mm Length min 60 mm Drive System Inching speed 8 m/min Hsdpfx Aex S Uuyjfhjfk Operating speed 20 - 400 m/min Crash lock bottom device Special version for 4/6 corner gluing HHS gluing system with 3 guns N. 2 gluing points disc system Belt pressing system delivery Main motor 21 kW Dimensions Length 14120 Width 2200 mm Weight 7000 - 10000 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Bobst Mistral 110 HHS 4 glue nossels Prefold 1/3 Straight line Crash lock 4 points glue 6 points glue Max speed 400 meter per minute Till 800 gsm carton , N, F and E Max format 1100 x 800 mm Min format 126 x 60 mm Hsdpfx Afeym A Hxshjfk

Condition: used, Used Lödige model FKM 1600D stainless steel ploughshare mixer. 1600 litre total capacity and 550-1100 litre working capacity. Ploughshare mixing blades direct driven by 21-35 kW 400 volt 3/50 740-1479 rpm motor through Flender type 185 102 025-2-1 gearbox rated 31kW with 1500rpm input and 115rpm output. Unit has (2) MK 30/55 choppers with air purged seals driven by 5.5kw motors. Has (2) side inspection doors and pneumatically operated drop door discharge. Hjdpozn Nmyofx Afhofk

Condition: excellent (used), The Colechester Bantem 1600 is a small compact lathe. It was mainly used in the educational sector providing training for its safe use to students. It was a well maintained machine, will little use and as a result has little or no backlash in its carriage's. It comes complete with 3 & 4 Jaw chucks, faceplates, and a set of gears for expanding the speed range of its spindle. It also has a range of tool holders and cutting tools. It has an integrated cabinet of the safe storage and easy access for its accessories. This machine is a strong, sturdy and compact machine and is suitable for may applications. Hedpfezmhmvex Afhsfk

Condition: good (used), Year of construction: 1999, load capacity: 1,600 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, empty load weight: 1,300 kg, Received in trade-in Electric stacker Brand: BT Year: 1999 BLOCK PALLETS: outer fork width 68 cm Capacity: 1,600 kg Lifting height: 2,900 mm Hodpfx Ajyc Eygjfhofk Drive-through height: 2,000 mm Battery: maintenance-free GEL with charger Watch the video on YouTube

Condition: new, Year of construction: 2025, cutting diameter 1600 mm saw band length 14000 mm cutting width 1600 mm hydraulic motor 3 kW total power requirement 11 kW / 7525 Nm weight of the machine ca. 20 t required space 4020 X 2220 X 7600 mm Custom-made: KSY 1600 × 1600 horizontal band saw Technical specifications: - Max. cutting diameter: 1,600 mm - Saw blade length: 14,000 mm - Cutting width: 1,600 mm - Machine weight: approx. 20 t - Installation dimensions (L × W × H): 4,020 × 2,220 × 7,600 mm Delivery time: approx. 5 months Customised adaptations in terms of dimensions and design are possible by arrangement. Optional equipment: - Clamping devices (choose from conventional, semi-automated or fully automated) - Motorised roller table system - Laser cutting line display - Additional double roller table - PLC control with operating screen Hodpfx Afsymf Rgehofk - Vibration damping system

Condition: new, cutting diameter 1600 mm saw band length 11000 mm cutting width 1,6 mm capacity 90 degrees: square 1600 X 1600 mm capacity 90 degrees: flat 1600 X 2500 mm Hfjdpfx Ajymf N Aefhjk total power requirement 11 kW weight of the machine ca. 19 t The pictures are only for orientation and illustration of the KSY model in a different size.

Condition: new, weight 1350 kg diameter 1760 mm height 1240 mm Hfjdoymf Irspfx Afhek 0 1210 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: used, LEUZE CML720i-R05-1600.R/PB-M12 Light curtain receiver Item no.: 50122897 Hsdpfxoy Suyps Afhefk

Condition: used, LEUZE CML720i-T05-1600.R-M12 Light curtain Transmitter Item no.: 50119468 Hfsdjy Sut Aepfx Afhsk

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm turning length 10000 mm turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm spindle bore 82 mm upper head travel 500mm tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t Power 45 KW The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and Hsdpfxjy S Duvj Afhofk reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Accessories - Feed guard Equipment - 3-axis digital display - 1 x faceplate - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Condition: good (used), Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership Hodsb Uhn Ujpfx Afhjfk -laterally movable -with counter -Table height: 278 mm -Table surface: 1600 x 295 mm -Table thickness: 18 mm -Price: per piece -Number: 2x available -Dimensions: 1600/295/H278 mm -Weight: 170 kg

Condition: new, fuel type: diesel, overall weight: 1,600 kg, empty load weight: 1,600 kg, Year of construction: 2024, GÜNTER GROSSMANN GG1600 MINI EXCAVATOR, 3-cylinder KUBOTA Günter Grossmann GG1600 Kubota Thanks to close collaboration between Günter Grossmann and Kubota, the new GG1600 excavator has been created. Track excavator Günter Grossmann GG1600. Mini excavator on tracks GG1600, KUBOTA engine, KDK hydraulic pump, VS EATON compressor motor. Very good quality. Standard equipment Excavation bucket 400mm Additional accessories for the machine can be purchased. Model GG1600 is a great machine for the most demanding construction, electrical, and hydraulic companies. We guarantee after-sales service. The excavator is manufactured based on solid European technology. SPECIFICATIONS Model: GG1600Y Brand: Günter Grossmann Weight: 1600kg Bucket capacity: 0.045 m³ / 200kg Engine: KUBOTA Engine power: 15 kw/2300r/min Main pump: Japan – KDK Japan Swing motor: American – EATON USA Hjdpfxoggai Uo Afhofk Travel motor: Korea – KOREA DONGHYUN WORKING RANGE Max. digging depth: 1650 mm Max. vertical digging depth: 1650 mm Max. digging height: 2610 mm Rotation radius: 360° Optional accessories available for order: Ground drill Grab Digging tooth Rake Narrow bucket 200 mm Narrow bucket 380 mm Leveling bucket 500mm Leveling bucket 800mm Quick coupler Breaker hammer GG1600 €13,400 excluding VAT GG800 Bn83wivh €5,900.00 including VAT €7,139.00 including VAT GG1000 €9,909.00 including VAT €8,190.00 excluding VAT transport costs on request We deliver to companies and private individuals in the Netherlands and Belgium! With each delivery, you will receive a VAT invoice and (factory) warranty. -Click on 'email this advertiser' and provide your contact details, and we will send you the webshop details. -tel (7 days a week from 8:00 to 23:00) -Collection is possible by appointment, also in the evening and on weekends. Easy payment... -via our webshop -Cash or card payment upon collection/delivery -Via iDeal (request a link via email) For GG 800 details, see our other advertisement. For more information, please call or email us. Lease negotiable.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 715 h, controller manufacturer: SIEMENS, laser power: 3,000 W, punching force: 18 t, sheet thickness (max.): 6 mm, overall weight: 18,500 kg, total width: 9,945 mm, total height: 2,500 mm, product length (max.): 8,862 mm, number of axes: 3, This 3-axis TRUMPF TruMatic 6000-1600 fiber was manufactured in 2022. It features a maximum laser power of 3,000 W and a punching force of 180 kN, with a maximum punching frequency of 917 strokes/min. The machine has a large working area, allowing for combined punching and laser processing. If you are looking to get high-quality punching and laser cutting capabilities, consider the TRUMPF TruMatic 6000-1600 fiber machine we have for sale. Contact us for further details. • Laser source: TruDisk 3001 solid-state laser, 3,000 W, fiber-optic beam delivery (10 m), compact cutting head, anti-collision, protective glass, closed beam guidance, programmable cutting gas pressure • Control/OS/Interface: Rexroth IndraMotion MTX CMP70; Windows Embedded; 17-inch touchscreen; 4 GB program memory; 320 GB HDD; USB; RJ45 10/100 Mbit/s; Internet teleservice; integrated technology database; NC program management; production planning; automatic machine shutdown; network connection for programming/production systems • Working area: • Punching (no reposition): 3,050 x 1,550 mm • Laser cutting (no reposition): 3,050 x 1,550 mm • Combined (no reposition): 2,500 x 1,550 mm • Combined (with reposition): 3,050 x 1,550 mm • Max sheet thickness: 6.4 mm; Max workpiece weight: 230 kg • Max part size via flaps: 500 x 500 mm (laser) / 500 x 500 mm (punching); via chute: 80 x 50 mm • Axes/performance: • Drives: Maintenance-free AC servo motors (X/Y/C); electrohydraulic punching head • Max speeds: X 90 m/min; Y 90 m/min; simultaneous 108 m/min; C-axis 330 rpm (punching/thread forming) • Frequencies: Max punching at E=1 mm: 917 strokes/min; marking: 2,800 strokes/min • Accuracy: Pa ±0.1 mm; Ps ±0.03 mm; min increment 0.001 mm • Punching unit: • Force: 180 kN; electrohydraulic head; rotary single-station tool holder • Tool circumferences: punching 76.2 mm; forming 101.6 mm; optional 110 mm • Change times: basic 3.2 s; MultiTool 0.3 s • Magazine: 25 linear positions; standard 22 tools; up to 220 with MultiTool • Clamps: 3 hydraulic; fully rotatable tools; programmable blank-holder; tool length compensation; punch lubrication; chip extraction with automatic tube emptying and fill-level estimation; stroke counter; tool lubricant level monitoring; WhisperTools compatible • Forming/punching functions: • MultiTool; MultiBend; thread forming (M2.5–M10); surface marking/embossing; vertically movable clamps • Max MultiBend: width 55 mm; height incl. material 25 mm; angle up to 90° • Automatic thread-forming lubrication; thread counter • Laser cutting capability (max thickness): • Mild/structural steel: up to 6 mm (O2 or N2) • Stainless steel: up to 6 mm (N2) • Aluminum: up to 5 mm (N2) • Laser functions: NitroLine; FocusLine; FastLine; FlyLine; ControlLine; slug detection; ejector cylinder for laser-cut parts; laser event log; automatic cutting-head height adjustment • Standard machine equipment and safety: • Rigid C-shaped welded frame; coordinate guide system; linear tool magazine • 3 hydraulic clamps; programmable repositioning; foot switch for clamp closing • Radiation protection at cutting head; two 500 x 500 mm part flaps with sensors • Ball tables; two finished-part containers; chip container • Compact dust extraction and filtration unit • Water-air cooling unit (machine and laser) • Initial hydraulic oil filling • Two-level safety light curtains; fast drive shutdown; protection against scattered laser radiation Hfsdezul Dzopfx Afhjk

Condition: used, Radial drilling machine REFORM, type RB 50-16 Year of manufacture: 2002 Drilling capacity in steel: max. 50 mm Tool holder: MK 5 Nominal overhang: 1600 mm Maximum overhang of the spindle to the column: 1600 mm Maximum overhang of the spindle to the column base: 1500 mm Minimum overhang of the spindle to the column: 340 mm Minimum overhang of the spindle to the column base: 240 mm Hfodpfozupamox Afhok Travel of the drilling head: 1260 mm Height adjustment of the arm: 600 mm Distance between clamping surface and drilling quill: max. 1100 mm Spindle speed: 25-2000 rpm Quill stroke: 300 mm Quill diameter: 80 mm Feed rate: 0.04 to 3.2 mm/rev (16 steps) Clamping surface of the base plate: 1750 x 980 mm (1650 x 840 mm) Column diameter: 350 mm Motor power, spindle drive: 4 kW Mains connection: 400 volts, 50 Hz - Spindle speed controlled via 16 gear stages with speed preselection and hydraulic gear shifting - Right and left rotation of the drilling spindle - Automatic feed via 16 gear stages with feed rate preselection and hydraulic gear shifting - Electro-mechanical height adjustment of the arm, with hydro-mechanical arm clamping - Hydro-mechanical central clamping of the head and column via push buttons - Coolant system in the machine base Machine height with drilling head at the top: max. 2840 mm Space requirement L x W x H: 2400 x 1000 x 2650 mm Weight: 3.5 tons Good condition

Year of construction: 1988, condition: used, Automatic edge gilding machine Ochsner GA Year: 1988 Hfodpfxozqt Efe Afhek Description: Grinding stations Regulation of grindings Brush with exhaust Priming station Gilding station Electric steering and controlling desk