Used Cinghia Nuova Per Sollevamento Carichi Pesanti for sale (22,138)

Year of construction: 2025, condition: new, functionality: fully functional, New device 12 months warranty Advantages of cooled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid swelling during mixing without the use of ice + Improved dough texture thanks to freshly cooled, liquid ice water + Accurate dosing possible via water mixing and dosing unit + All water-contacting parts are made of stainless steel and maintenance-free + Hygienically perfect, clean drinking water Langheinz ice water systems are characterized by: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel evaporators + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water baths + Drain tap in ice water bath + High flow capacity + Compact dimensions + Easy-to-maintain surface structure + Low energy consumption SPECIAL accessories, optionally available at additional cost: - Stainless steel wall bracket (for model L130 + L170): + €499 net - Machine table (for model L130 + L170): + €589 net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters / hour - Peak cooling capacity*: 330 liters / hour - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1.86 kW Redpjivdvvefx Afnot - Refrigerant: R290 (new 2021 standard!) - Electrical connection: 230 V - 50Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch - Water flow at 2 bar: 20 liters / min - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 80 kg - Energy consumption per 100 liters: 1.5 – 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2025, condition: new, functionality: fully functional, New device 12 months warranty Benefits of chilled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid swelling during mixing without ice + Smoother doughs thanks to freshly chilled, liquid ice water + Exact dosing possible via water mixing and dosing unit Redpfsivdv Dox Afnjt + Water-carrying parts are made of stainless steel and are maintenance-free + Hygienically flawless, clean drinking water Langheinz ice water systems feature: + Consistently low water temperatures + High-performance refrigeration units + Cooling systems with expansion valve + Electronic ice bank controller + Stainless steel cooling evaporators + Multi-stage stainless steel water heat exchangers + Insulated stainless steel ice water tank + Drain cock in ice water tank + High flow rate + Compact dimensions + Easy-care surface structure + Low energy consumption SPECIAL accessories, optionally available at extra charge: - 3-way switching valves --- For water mixing and dosing units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 70 liters - Continuous output*: 230 liters / hr - Peak cooling output*: 500 liters / hr - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Electrical connection: 400 V - 50Hz - 1Ph - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow at 2 bar: 25 liters / min - Dimensions: 1170 x 630 x 770 mm (LxWxH) - Net weight: 145 kg - Energy consumption at 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Condition: like new (used), Year of construction: 2022, operating hours: 2,500 h, functionality: fully functional, Used pellet production plant, capacity 2.5 tons per hour complete with belt dryer. Rjdpfxswk Htxj Afnst

Condition: good (used), mileage: 312,000 km, color: white, emission class: euro6, Year of construction: 2018, IVECO EUROCARGO ML 160E28 Year 2018 DIESEL / Euro 6C Km: 312,000 Automatic transmission / Engine displacement 6728 cc GVW 16,000 kg Rsdpfevddqcex Afnst Payload: 7,000 kg / Wheelbase: 3,690 mm NEW – Tipper body 4200x2550xFloor height 1250 mm NEW – BONFIGLIOLI P15000/L 4SI crane - Hydraulic extending outriggers - Rear cross member - Remote control Air-conditioned truck

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: 1005/40200317/2010, color: grey, macchina perfetta in ogni sua parte, pronta per essere messa in produzione composta da : sfilatore a cassetto / 3 mettifogli dei quali 1 con dischi di lancio 1 sdoppiabile per doppio inserimento inserti, 1 pivottante a 90 gradi per inserimento inserti in linea di senso di marcia, incollatore abbinato ad etichettatrice elettronica per inserimento indirizzi da 1 pollice a 4 pollici da 2 a 4 piste oltre anche per conti correnti, confezionatrice predisposta con apparato stirofilm per riduzione del lasco sacchetto, staker di raccolta e conteggio prodotti con espulsioone laterale e nastro meccanico di uscita prodotto. Rodpfx Aeuxmlijfnjt

Condition: used, Wigo Double squaring machine with 3 groups per side, complete with inverters. - right and left circular saw - right and left cutter - right and left cutter Max working width: mm. 1500 Engine power: Rodpjummldsfx Afnot Circular saws: 3KW X2 Toupie Milling Machines: 5.5kw x2 Rotary Sanders: 5.5kW x2 Feed motor: 4KW Shoulder width adjustment motor: 3KW

Condition: good (used), Pump ready for operation Redpfeycx Hgsx Afnet Capacity: 160 m3/h

Condition: good (used), Lifting system, Megamat, 170 kg / tray, approx. 6 m high, – used - : Price ex location: €14,500 (net), plus dismantling, etc. Manufacturer: Megamat Model: Megalift 14448/25/6010 Year of manufacture: 2000 Rjdsyhxkmopfx Afnjt Max. load capacity per tray: 170 kg Max. total load capacity: 18,000 kg Dimensions per tray: approx. 2.45 m x approx. 0.80 m Number of trays: approx. 40 units Machine dimensions: Height: approx. 6.01 m Width: 2.76 m Depth: approx. 2.70 m 3/N/PE 230/400V 10A, fuse 16A Condition: good Availability: immediately Location: BG-8800 Sliven

Condition: excellent (used), Year of construction: 2007, I sell the double end cutting and tenoning machine SCM CONCEPT NT. Working width up to 3000mm Configuration left side / fix: 1 pc. cutting saw aggregate Redpotv Rxbsfx Afnet 1 pc. moulding aggregate 1 pc. moving jumping moulding aggregate Configuration right side / moving: 1 pc. cutting saw aggregate 1 pc. moulding aggregate 1 pc. moving jumping moulding aggregate Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 7560, working width: 1,200 mm, Equipment: documentation/manual, TECHNICAL DETAILS Working width: 1,200 mm MACHINE DETAILS Connected load: approx. 51 kW EQUIPMENT Rodpey Ed A Tofx Afnot Documentation

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: GD12002, workpiece weight (max.): 150 kg, grinding length: 1,000 mm, grinding diameter: 360 mm, overall weight: 4,700 kg, TECHNICAL DETAILS Max. grinding diameter: 360 mm Max. grinding length: 1,000 mm Max. workpiece weight: 150 kg MACHINE DETAILS Main drive power: 5 kW Dimensions & Weight Dimensions (L x W x H): 3,030 x 2,250 x 2,030 mm Weight: 4,700 kg EQUIPMENT PLC controlled Tailstock Work spindle Grinding spindle with flange and grinding wheel Internal grinding device Wet grinding system Electronic handwheel Work lamp Rsdpjy A Nl Usfx Afnst Center point Chuck Manual

Condition: good (used), Horizontal PFM flow rapper is specifically designed to meet any need of flexible packaging for food and non-food applications. Rjdpfey D Uzqex Afnet This is an ex bakery machine, in good working condition

Year of construction: 2018, condition: excellent (used), Record Scorpion BS RS Medium Flow Wrapper Bottom-seal horizontal flow pack machine designed for small-to-medium products, reaching speeds up to 120-240 ppm. It is known for its compact size, robust mechanical construction, and user-friendly operation. Key Features Performance: The Scorpion BS RS manages 120 (up to 240 in some configs) packages per minute. Redsywzhkepfx Afnjt Structure: This machine features a bottom seal system suitable for fragile or heavy items. Capacity: It handles products up to 750 mm wide and 120-160 mm high. Purpose: Ideal for food and non-food, including irregular or delicate items, utilizing high technology for medium speed. The machine is often used for items like fresh produce, bakery products, or cheese, where a secure, bottom-sealed wrap is necessary.

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Model: TSS-70/350-A Year of manufacture: 10/2017 Version: Temperature Shock Test Chamber Cooling unit: Water-cooled Description Used temperature shock test chamber by CTS. Suitable for shock and temperature cycling tests. For use in industry, research, and quality assurance. Areas of Application - Material testing - Aging tests - Electronics and component testing - Temperature shock tests - Automotive and QA Temperature Ranges Hot chamber: +50 °C to +220 °C Rodpfx Aoy H Hk Asfnjt Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Precooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Features - Touchscreen control - Microprocessor controller - Programmable operation - Digital setpoint/actual display - 2-zone system - Transfer cart for rapid specimen transfer - Viewing window - Integrated control cabinet - Cooling water connections Technical Construction - Separate hot and cold chambers - Stainless steel test space - Industrial-grade construction Dimensions External: 2335 x 940 x 1820 mm Handling dimensions: 1990 x 940 x 1652 mm Internal: 410 x 480 x 660 mm Weight Approx. 950 kg Documentation - Declaration of conformity - Test certificates - Operating manual - Circuit and piping diagram - Spare parts list Service before delivery (optional) - Functional check - Refrigerant service - Leak test - Test run with log Condition Used. Cosmetic condition as shown in photos. Scope of Delivery - Test chamber TSS-70/350-A - Documentation (where available) Note Used machine, sale without warranty. Inspection can be arranged upon request. Loading and transport can be organized if required. Subject to prior sale and technical modifications. For any questions, please feel free to contact us.

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Typical applications: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Warm chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Precooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Program operation - Digital setpoint and actual value display - 2-zone system (warm and cold chamber) - Automatic transfer basket for shock tests Technical design: - Warm and cold chamber separated - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Insert shelf / wire rack - Viewing window in door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: approx. 950 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run Rodpfx Afey Hkgbsnst Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components Redpfxjy Hkfdo Afnst 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C Rjdpfx Aey Hkd Hefnst - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization Redsif Ek Rspfx Afnet • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” Rjdpfx Afofnlkwonot • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Rsdpswgc I Refx Afnot Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) Rjdpfxjfhgvws Afnet The machine is CE-certified.

Condition: excellent (used), Year of construction: 2021, volume capacity 3000 m3/h feed volume 99.9 % length 3.000 Absaugschlauch mm compressed air 5.0 - 6.0 bar motor 230 Volt Redpfx Afsy Erxcjnst motor 1.5 KW weight 135 kg range L-W-H 655 x 655 x 1460 mm very rarely used according to the previous owner current new price approx. 4.500 euros special price on request Description : - KEMPER Filter-Master XL with 1x suction arm - IFA-tested - W3 approval = suitable for use with . welding of high-alloy metals - Cleaning takes place via compressed air - easy to move Technical data - Fan capacity: 3,000 m³/h - Extraction capacity (max.): 1,000 m³/h - Motor power: 1.5 kW - Supply voltage: 3 x 400 V / 50 Hz - Separation efficiency: > 99.9 % - Number of filter cartridges: 1 - Compressed air supply: 5 - 6 bar - Noise level: 69 dB (A) - Weight (without extraction arm): 135 kg - Dimensions (W x D x H): 655 x 655 x 1,460 mm Note : - Device is only used for extracting dry dust / smoke - Read the operating instructions before using the appliance for the first time. Read instructions

Condition: excellent (used), Year of construction: 1985, Feed rate 6 m/min. Dimensions (Length/Width/Height) 700 x 350 x 450 mm Total power requirement 0.2 kW Machine weight approx. 25 kg Year of manufacture 1985 Throat depth 420 mm - Foot pedal - Veneer thickness 0.4 - 2 mm - includes several Kuper spools Location: ex stock 54634 Bitburg - immediately available - Rodpfxoy E T Tns Afnst

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Knetspirale kneading tool Spiral for Kemper Spiral Rodpocphnrofx Afnot Model: SP 50 stainless steel More Knetspiralen upon request!

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, DGUV certified until: 05/2027, year of last overhaul: 2026, total length: 1,380 mm, total width: 1,200 mm, total height: 850 mm, tank capacity: 240 l, empty load weight: 350 kg, overall weight: 350 kg, inner diameter: 1,150 mm, Kemper SP 150 A Tank Wagon Rjdpfx Afjw Ttg Ajnet Refurbished used equipment with warranty Quality from a specialist workshop! Benefit from over 35 years of experience!