Used Zmm C 11 Mcs for sale (62,043)

Condition: excellent (used), Year of construction: 2025, operating hours: 11 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 11-270D (5 to 13 bar) include Dryer with time controlled drain include 270 liter tank include controller Air Control Base Year of construction: 2025 Operatin hours: 5 Technical specifications Type: Combi XP 11-270D Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.30 to 2.00 m³/min at 6 bar (g): 0.30 to 1.89 m³/min at 7 bar (g) : 0.30 to 1.78 m³/min at 8 bar (g) : 0.29 to 1.67 m³/min at 9 bar (g) : 0.29 to 1.57 m³/min at 10 bar (g) : 0.29 to 1.46 m³/min at 11 bar (g) : 0.28 to 1.36 m³/min at 12 bar (g) : 0.28 to 1.24 m³/min at 13 bar (g) : 0.27 to 1.17 m³/min Nominal power drive motor: 11 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400/60-315/3 V / Hz / ~ Ndjdpfx Aqsw Duytswoa Compressed air connection: 3/4“ G Length: 1530 mm Width: 700 mm Height: 1640 mm Weight: 590 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: good (used), Year of construction: 1997, spindle bore: 62 mm, turning diameter over bed slide: 440 mm, turning diameter over top slide: 230 mm, turning length: 2,000 mm, total length: 3,500 mm, total width: 700 mm, total height: 1,500 mm, spindle speed (max.): 2,000 rpm, Centre lathe ZMM Sliven - CU 400 MACH-ID 9758 Make: ZMM Sliven Type: CU 400 Year: 1997 DBC Turning Length: 2000mm Swing over bed Ø: 440mm Swing over cross slide Ø:230mm Swing in the gap Ø: 620mm Spindle bore: 62mm Spindle power: 8kW Bed width: 360mm Tailstock spindle Ø: 70Ø Stroke pinole: 180mm Nedozpwixjpfx Aqwsda Spindle taper: 5Mk Speeds / ranges: 2000Rpm Length: 3500mm Width: 700mm Height: 1500mm Weight: 2600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2003, Bütfering Optimat SBC 111 C Sandy Working width: 1100 mm Abrasive belt width: 1120 mm Abrasive belt length: 1900 mm Upper section adjustment, constant table height Sanding unit type C - 1 combined contact roller sanding unit, with abrasive belt grit compensation and calibration device SWP – steel contact roller (profiled) EG 25 – electronically controlled segmented pressure beam in compact design, element width 25 mm A 3 – triple pole-changing drive motor 3.7/7.5/15 kW Abrasive belt speed: 4.5/9/18 m/s Ndodpfx Ajy E Rt Eeqwja BV – belt blow-off device TE 1 – terminal with 50 freely programmable sanding programs for automated machine control STV – belt feed (carpet feed) driven by continuously adjustable gear motor, feed speed 2.5 - 13 m/min RTE – roller tables at infeed and outfeed FB – rotating cleaning brush on the outfeed side Total connected load approx. 16 kW Operating manual Year of manufacture: 2003 New conveyor belt Price

Condition: excellent (used), For sale: ZMM C8C lathe as shown in the photos, marketed under the Huvema brand for the Dutch market. The machine comes from a school workshop where it has been in operation since its production. The condition of the machine is very good. On-site loading of the machine is provided. Njdpoy Rq Utofx Aqweda Turning trials were performed using a VCGT insert with a radius of 0.2. 160 mm Bison chuck with split jaws Turning length: 750 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Tailstock taper: MK3 Spindle speeds: 85–2000 RPM 12 spindle speed steps

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Nsdpfsx Twcpox Aqwsda

Condition: used, Year of construction: 2000, Working width .- mm Ndsdevwfl Uspfx Aqwoa With 1 sanding unit consisting of:- combination unit with electronic shoe for lacquer sanding- lacquer sanding- dust brush- roller table at infeed 270 mm- program control electronic f. 50 programswith brand-new feed carpetusedmake Bütferingtype Classic 111 Cyear of construction 2000machineNo. 63608Working width 1100 mmPassage height 160 mmCE type-testedGS wood dust testedBelt dimensions 1120 mm x 1900 mmFeed speed 4 8 m/min.1 piece combi unit 3.7/7.5 15 kW , 3 belt speeds with autom. steel rollerdiameter 130 mmbelt speed approx. 4,5 9 18 m/selectronic link shoesegment pitch 50 mmfor lacquer sanding workpiece controlledstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty

Condition: new, Maximum turning height: 315 mm Turning diameter over the bed: 630 mm Turning diameter over the cross slide: 430 mm Turning diameter in the chuck: 830 mm Distance between centers: 3000 mm Spindle bore: 103 mm Spindle fitting, DIN 55027: Size 11 Bed width: 400 mm 21 speed ranges: 12.5 – 1250 rpm Feed range, longitudinal: 0.04 – 12 mm/rev Feed range, transverse: 0.02 – 6 mm/rev 64 metric threads: 0.5 – 120 mm 64 inch threads: 60 – 1/4“ 64 module threads: 0.125 – 30 module 64 diametral pitch threads: 240 – 1 pitch Tailstock fitting: MK 5 Tailstock quill travel: 230 mm Tailstock quill diameter: 75 mm Drive power: 11 kW Dimensions L x W x H: approx. 5100 x 1400 x 1300 mm Weight: approx. 4800 kg Accessories / Special Features: • 3-axis digital read system, manufacturer K+C • 3-jaw chuck, manufacturer BISON, Ø 315 mm • Quick-change tool holder system “Multifix”, Size C • Powerful main drive with 11 kW • Large spindle bore, Ø 103 mm • Traveling steady rest • Fixed steady rest, small • Fixed steady rest, large Ndjdpfx Aqek Dpxlowoa • Chuck • Rapid traverse in longitudinal and transverse direction • Electrodynamic brake • Coolant system • Machine light • Quick-change device for the tailstock • Bed stop • Protective shield, rear, full length • Tool holder protection • Chuck protection, electrically secured • Lead and feed screw protection • Interchangeable gears • Fixed center for the spindle • Reducer sleeve for the spindle • Two colors: top light gray RAL 7035, bottom blue RAL 5015 • CE compliant Delivery time: approx. 2 months after order placement Delivery: ex works, manufacturer's plant in Bulgaria, free on board (FOB) truck Warranty period: 12 months, with single-shift operation (8 hours) Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2001, condition: ready for operation (used), A Walther Trowal mass finishing system is available. 1) Walther Trowal G 100-C vibration dryer, year of manufacture: 2001, usable volume: 70l, max. heating capacity: 3kW, max. workpiece diagonal: 160mm, bowl diameter: 980mm, discharge height range: 730mm-1030mm, feed height range: 765mm-1065mm, top edge of work bowl height range: 885mm-1185mm. 2) Walther Trowal CD 110 circular vibratory finisher, year of manufacture: 2001, gross volume: 110l, usable volume: 73l, max. workpiece diagonal: 160mm, screen area: 1632cm², speed: 1000rpm, max. centrifugal force: 17540N, weight: 450kg. Including various finishing media. Documentation available. An on-site inspection is possible. Ndedpfx Aozmylwsqwja

Condition: used, Year of construction: 1998, machine/vehicle number: 42016, Zusammentragmaschine / Broschürenfertigung MC-80a MC-80m SPF-11 FC-11 Booklet Maker / Brochure Finishing MC-80a MC-80m SPF-11 FC-11Anlage besteht aus / Booklet Maker consist of:Zusammentragmaschine / Air Suction Collator MC-80a MC-80m - 2 x 8 Stations Feeder Baujahr / Year 1998 - Serial-No. 042016 Format / Size min. 110 x 160mm - max. 318 x 470mm Grammatur / Paper weight 50-260g/qm Stapelhöhe / Infeed height Station 50mm Geschwindigkeit / Speed 5.100 Product/hBroschürenfertigung / Booklet Maker SPF-11 - FC-11 Baujahr / Year 1998 - Serial-No. 128032 Heften-Falzen-Schneiden / Stitching-Folding-Trimmer Unit 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Kompressor / Compressor Rietschle Auslage / Delivery - Rüttler / Jogger PJ-77 Geschwindigkeit / Speed 1.500 - 3600 Sets/h Online-Video-Inspection by Skype-Video Ndedpoibuq Djfx Aqwja We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, weight 204 kg Ndodpfx Aeuzyiteqwsa

Condition: excellent (used), Wide-belt sanding machine KÜNDIG Premium for finishing coats Type Premium 1 1100-C - used - constant working height thanks to adjustable upper section, combined unit with contact roller and sanding pad, contact roller with rubber coating, pneumatic activation of the contact roller, electronic segmented sanding pad, digital display for sanding height, automatic thickness adjustment, infinitely variable feed rate, automatic carpet centering, operation via touchscreen, belt cleaning, air-sprung sanding pad, sanding belt oscillation, workpiece cleaning via compressed air nozzles, table extension at the infeed and outfeed, finishing coats possible ----- Technical data ----- Working width: 1,100 mm, Number of belts: 1 piece, Sanding belt speed: 3 - 15 m/sec., Feed rate: 3 - 15 m/min., Segment width sanding pad: 22 mm, max. workpiece thickness: 205 mm, min. workpiece thickness: 3.5 mm, Dust extraction port Ø: 180 /120 /100 /100 mm, Motor power: 11 kW, Dimensions (LxWxH): 1,660x1,700x2,250 mm, Weight: 2,150 kg Quality information: - Belt run / imbalance checked Nodpfxozkvd Ro Aqwjda - Sanding pad checked / refurbished - Height adjustment checked - Complete thorough cleaning - Electrical system checked - Ready for immediate use

Condition: used, Model North - South, clock wise rotation Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Belt length ± 425 m Infeed height 800 mm Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Ndsdszwddxjpfx Aqwea Required cooling capacity: 150 kW Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included

Condition: good (used), Year of construction: 1983, Continuous Butter Making Machine (CBM). Brand : Simon Freres Type : MD1119 C Year : 1983 Capacity : 2.000 kg per hour butter output Input : ± 4,000 liters of cream 38-42% fat With accessories: - Water and culture dosing system - Vacuum pump - Controls - Piping 1 x Butter Silo Butter capacity: 2.000 kg With 2x Butter Pumps: Waukesha type: 130U1 Motor: 5.5 kW Njdpfjydnzpox Aqwoda CIP return pump Description: Butter production line. Still located at the factory in Belgium. Operating principle of the production line: Continuous butter making machine. A cream pump transports the cream from the buffer tanks to the CBM. The CBM is capable of converting 4.000 liters of cream into 2.000 kg of butter. It also features a recirculation system for cooling and injecting buttermilk, a vacuum section, and injection pumps for culture and brine. Furthermore, it includes a buttermilk cooler, buttermilk and CIP pumps, a collection tank, valves, piping, and all the necessary controls. After the butter is made in the CBM, it is pumped into the Egli butter silo, which includes two Waukesha outlet pumps to transport the butter to the filling machines.

Condition: good (used), Year of construction: 1998, ZMM Sliven - CU 1000 steady rest Ndsdpfex Ttfaex Aqwja

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, warranty duration: 6 months, input voltage: 400 V, Equipment: documentation/manual, We offer this used Alfred Gruber GmbH bottle filling machine, model ARFD 6/11, complete with rinser and RingBull Off capping system, manufactured in 2020. Manufacturer: Alfred Gruber GmbH Type: Bottle filling machine ARFD 6/11 Year of manufacture: 2020 Manufacturing number: 2020044 Order number: 5728 Capacity: 1100 bottles/h Capacity per bottle: 0.33 l Rated current: 16 A Rated voltage: 3×400 V/N/PE Frequency: 50 Hz 1 unit: Fully automatic bottle rinser integrated into the system Linear electro-pneumatic bottle rinser with 2x6 spray nozzles suitable for bottles Suitable for cylindrical bottles: Height: 170-300 mm Diameter: ø 58-90 mm Ndodpfxjzlymfj Aqwoa 1 unit: Water filter system for bottle rinser 1.0μ and 0.45μ filters with housing 1 unit: Automatic bottle filling and 5-liter can filling machine with IDM, 6-position - Fully automatic filling process - Container maximum ø90mm, height 320 mm - Semi-automatic filling process - Container maximum ø175mm, height 350mm - Semi-automatic filling process for 2.0l siphon bottles with handle and 5.0l party keg cans (only every second station can be used) Capacity: 1,100-1,200 bottles/h (0.3l bottle) 1,000 bottles/h (0.5l bottle) 700 bottles/h (1.0l bottle) 1 unit: Spray tunnel For washing away beer residue from the containers 1 unit: Rotary table – infeed 1 unit: Fully automatic ring pull-off capping system integrated into the system Optional conversion to crown cap ø26 with sorting bowl at an extra cost of Euro 25,000 instead of the Ring Bull Off 1 unit: Conveyor belts Completely serviced and maintained, including a 6-month warranty and electrical components.

Condition: good (used), Year of construction: 2016, Marel I-Cut 11 Portion Cutter This I-Cut 11 from 2016 has been designed with new generation processing software with maximum programming flexibility and a variety of specialized cutting patterns to guarantee maximum return on investment. The machine features a powerful computer and advanced laser vision system that ensure unmatched accuracy and minimal giveaway. The new generation touchscreen makes daily operation and programming easier than ever before. Ndedpfx Aezdf Ugsqwsa With the compact design, the I-Cut 11 is easy to install in any small plant layouts and is easy to integrate with other Marel equipment. New and powerful computer with proven servo motor technology for high-precision cutting and long lifetime. New generation touchscreen. Easy-to-operate touchscreen makes daily operation easy. New laser vision system with 200 Hz camera technology ensures extreme accuracy. High-speed portioning in a 90° angle. Remote service access through Ethernet for maximum uptime (optional). Small footprint – the compact design fits into small plant layouts. Ropanyl belts for easy sanitization. Quick release belts. Easy release and removal of belts for cleaning – no tools required. Max. product length:    800 mm (31.5 in) Max. product width: 250 mm (9.8 in) Max. product height: 100 mm (3.9 in) Max. cutting speed: 480 cuts/min Belt speed: 10–340 mm/sec (0.4-13.4 in/sec) Machine length: 2.700 mm (106.3 in) Machine width: 1.000 mm (39.3 in) Machine height: 1.650 mm (65 in)

Condition: used, Year of construction: 2001, Year of manufacture: 2001 1 unit 1 combined contact roller/sanding pad unit, with sanding belt grit adjustment and calibration device Steel contact roller (profiled) Automatically adjusting contact roller Electronically controlled segmented pressure bar in a compact design, element width 50 mm Program-controlled adjustment of the sanding pressure of individual segments Unit drive with electronic, wear-free brake 3-pole switchable drive motor 3.7/7.5/15 kW Ndsdpfx Aji Eu Aqeqwea (Sanding belt speeds 4.5/9/18 m/s) Working width 1100 mm Sanding belt width 1120 mm Sanding belt length 1900 mm Machine complete with rubberized pressure rollers Pneumatic sanding belt tensioning with integrated sanding belt edge alignment Terminal with 50 freely programmable sanding programs for fully automated machine control Belt feed rate of 4 and 8 m/min Price: €14,900 plus VAT

Condition: used, mileage: 837,700 km, power: 371 kW (504.42 HP), first registration: 03/2013, fuel type: diesel, number of seats: 53, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Starliner C * FIRST GERMAN OWNER + ready for registration * Maintained according to service schedule * very good tires on all axles (front axle completely retreaded in 06/2026) * 371 kW / 505 hp - EURO 5 - EEV * ABS, ASR, EBS, ESP * Retarder * Cruise control * 50 + 2 + 1 seats * Vehicle length: 12,990 mm * Ski compartment * Toilet * 220 V socket in the luggage compartment / driver's area * VOLTAGE CONVERTER 3000 W * Fire alarm and extinguishing system * Air-conditioned driver's seat * Navigation system that can be displayed on monitors * Driver's view camera * Rear view camera * Extended sleeping cabin * AIR CONDITIONING * Auxiliary heater * Convector heater * DVD player * External power supply * Alarm system * Onboard kitchen * NEW TACHOGRAPH generation installed * MAN invoices available: oil cooler replaced, exhaust turbocharger, disc brake caliper, high-pressure fuel pump, axle link, brake disc, shock absorber, etc. * etc. * Vehicle has very good features. * FIRST GERMAN OWNER with maintenance records (various invoices from MAN available). * Vehicle registered and in operation (mileage and condition may vary) * Undercarriage in good / clean condition * Brake cylinder, drive axle, replaced 08/2026 * Note: * The customer is obliged to independently verify the condition and features of the goods / vehicle! * All information without guarantee * We reserve the right to sell the vehicle in the meantime * We refer to our general terms and conditions Njdszbfz Iepfx Aqweda * Note: The customer is obliged to independently verify the condition and features of the goods / vehicle! All information without guarantee. We reserve the right to sell the vehicle in the meantime. We refer to our general terms and conditions.

Condition: excellent (used), DEMAG / ABB / TELEMECANIQUE – Frequency Converters / Inverters – 11 units: 1. DEMAG Type - ACS800 04M-0140-3+D150+E210+H355+H356+H360 with resistance unit (new) – 1 unit. 2. DEMAG Type - ACS800 04M-0210-3+D150+E210+H355+H362+N672 Nedpjyu S Alefx Aqweda with resistance unit (used) – 1 unit. 3. DEMAG Type - UD DPU415V024E10 – 1 unit. 4. TELEMECANIQUE Type - ATV 58ED23N4 – 15 kW (in original packaging). 5. DEMAG Type: ABB – ACS 800 – 2 units. 6. DEMAG Type: ABB – ACS 800 – 1 unit. 7. VACON / AC DRIVE – 3 units. 1. VACON Type: X4K40400C 2. VACON Type: XX4K440075C 3. AC DRIVE Type: X4K40075C1 8. AC DRIVE Type: X4 – 1 unit.

Condition: used, mileage: 10,916 km, power: 68 kW (92.45 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 8,200 kg, empty load weight: 3,700 kg, maximum load weight: 4,500 kg, axle configuration: 4x4, number of seats: 1, first registration: 03/1981, brakes: other, Year of construction: 1981, operating hours: 10,916 h, driver cabin: day cab, Equipment: all wheel drive, cabin, head guard, standard shovel, * German device * Condition, see photos * 10,916 operating hours * Faun Frisch wheel loader F1100B-C * 4x4 all-wheel drive * Bucket approx. 1.3m³ * 4,100 kg front axle * 4,300kg rear axle * Hydrostatic steering with hydraulics Nsdpfx Aqev Efnlswoda * Tight turning circle thanks to articulated steering * Deutz engine 4,710ccm with 68Kw * Protective roof * Speed approx. 35 km/h * Sun visor * Operating weight 8,200kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, Year of construction: 2000, operating hours: 7,479 h, load capacity: 2,900 kg, lifting height: 4,500 mm, fuel type: gas, gearing type: automatic, Equipment: head guard, Front forklift with fork adjustment and side shifter Lighting Side shifter Fork adjustment Nedpfx Aezu Uxhjqwjda Protective roof Driver's seat with hydraulic suspension for enhanced comfort Fork extension Permissible total weight: 4,500 kg Forklift in good overall condition. No liability for typing and data transmission errors. Subject to errors and prior sale. Daily cash purchase of used commercial vehicles, construction machinery, trailers, and semi-trailers manufactured between 2000 and 2026. Nationwide delivery possible.

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a CNC controled universal cylindrical grinding machine EMAG Weiss W 11 CNC. Ndsdpfx Aqjr Ey Huewsa The machine is suitable for external-interna- face and cylindrical grinding. The W 11 CNC cylindrical grinding machine is perfect for one-offs- / prototype- and serial production. This cylindrical grinding machine is also used for sample production in the field of training and maintenance. CONTROL Eckelmann TECHNICAL DATA Workpiece length: max. 1.500 mm Center height: 200 mm | Option 320 mm Workpiece weight: 250 kg Workhead: MK 4 | Option MK5 / MK6 Tailstock: MK 4 TOOL CARRIER Single wheel straight / incliend, but also possible 2 wheels on B-axis combined with internal grinding spindle. Price, delivery time and equipment of the machine according to agreement.

Condition: used, Year of construction: 1989, x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 31 - 5.000 U/min table-size 620 x 390 mm table load 250 kg power capacity 5,5 kW Nedpfsx Ndbqsx Aqwsda feeds -stepless- 2 - 6.000 mm/min quill stroke 80 mm voltage 380 V total power requirement 11,0 kVA weight of the machine ca. 1,65 t dimensions of the machine ca. 1,85 x 1,90 x 1,80 m electric cabinet 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment

Condition: ready for operation (used), Schneider Electric ELAU PacDrive MC-4/11/22/400 SN: 2228230252, used, in good condition, 100% functional, delivery as per photos. Njdpfjx Eucdox Aqwoda

Condition: used, L + Z Lathe ZMM - SLIVEN (Bulmak - Bulgaria) Type CU 325 Machine No.: 8169 Year of manufacture: 2002 Centre distance: 1000 mm Swing over bed: 320 mm Centre height over bed: 160 mm Swing over cross slide: 190 mm Centre height over cross slide: 95 mm Spindle bore: 32 mm Spindle speeds (forward): 85 - 2000 rpm, 12 steps Spindle speeds (reverse): 130 - 1300 rpm, 6 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55027 size 5 Tailstock quill taper: MT 3 Drive power: 2.2 kW Power supply: 400 Volt, 50 Hz - 3-axis digital readout RSF, type Z 730 - Spindle speed adjustable in machining direction via 12 gearbox steps - Spindle speed adjustable in counter direction via 6 gearbox steps - 3-jaw chuck BISON Ø 160 mm with 1 set of stepped jaws - 4-way universal tool post - Coolant tank with pump integrated in machine base - Spindle brake operated via direction lever - Emergency stop via foot pedal and emergency switch - Foldable chuck guard - Machine lamp - Splash guard - Travelling steady rest - Quick-change drill chuck with MT 3 taper - Multiple change gears - Operating manual with electrical diagram Installation dimensions (L x W x H): 2100 x 800 x 1600 mm Weight: 750 kg Good condition Ndodovt U Tmepfx Aqwja