Used Wood Chip Sieve for sale (10,556)

Condition: used, Substation for wood chip extraction – Wood chip extraction system Brand: Fida Installed power: 37 kW System equipped with 98 filter bags (Ø 250 mm, height 2810 mm), designed to ensure high suction and filtration capacity. Overall dimensions: 8500 x 2500 mm Csdpfx Afeyx Digsqogw

Condition: not inspected (used), Year of construction: 1993, operating hours: 23,456 h, functionality: unexamined, machine/vehicle number: 22734, overall weight: 1,500 kg, power: 160 kW (217.54 HP), heating capacity: 160 kW (217.54 HP), space requirement length: 2,000 mm, space requirement height: 2,200 mm, space requirement width: 1,100 mm, temperature: 95 °C, Mawera FU160 TRA boiler body for sale as spare part. Untested, dismantled, ready for loading immediately. Cgedpevvmvfsfx Afqjw

Condition: used, SPE Renergi Low Temperature Dryer. Cgedowp Rqfopfx Afqsw The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: refurbished (used), Wood chip screen IDL000756 Cjdpfxjtmtf Rs Afqegw - Three layers - Manufacturer: Passimo OY - Screen area: 15 m2 - After renovation.

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Cgedpjqmi Irefx Afqow Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: as good as new (ex-display), Demonstration unit with 7 operating hours immediately available (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Feed opening 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Blades: multiple reversible Hydraulically operated slide Screen size optional (10 - 40 mm) Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star/delta start - fast hydraulics - auto. OFF when rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF, and other materials after testing and approval by the manufacturer. Included: - Shredder raised by 30 cm (preparation for conveyor belt) Additional options for the shredder: - Articulated conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm Cgjdpjv Sqrpefx Afqew - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - The moisture content (as received) must be below 30%, - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear.

Condition: excellent (used), Catalogue number 7361 TECHNICAL DATA - Feed opening width: 400mm - Feed opening height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm - Knife length: 430mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - 2 lower feed toothed rollers - Motor for lower rollers: 1.8kW - 2 upper feed toothed rollers - Motor for upper rollers: 1.8kW - Belt feeder - Feeder belt length: 2200mm - Feeder belt width: 330mm Cgedpfezh Ivajx Afqjw - Main motor: 22kW - Autoreverse - Reverse function - Overall dimensions (L/W/H): 4100x1350x1100mm - Weight: 1800kg ADVANTAGES – German production – Autoreverse (adjustable) – Reverse function – Used shredder, very good condition Net price: 66,900 PLN Net price: 15,920 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7672 TECHNICAL DATA - Loading hopper inlet: 1200x1000mm - Outlet for processed wood: diameter 160mm - Rotor working width: 980mm Cgodpfezh Imrox Afqjw - Main motor: 18.5kW - Number of knives: 24 pcs - Knife size: 30x30mm - Screen: 20mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x1700x1850mm - Weight: approx. 2500kg ADVANTAGES – Made in Germany – Auto-reverse – Feed drawer – Very good condition – Used chipper Net price: 85,900 PLN Net price: 20,450 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7725 TECHNICAL DATA - Loading hopper inlet 1200x1000mm - Outlet for shredded wood ø 200mm - Rotor working width 980mm - Main motor 22kW - Number of knives 24 pcs - Knife dimensions 30x30mm - Screen 16/11mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H) 2600x2000x1720mm - Weight 2125kg ADVANTAGES – German production – Auto-reverse – Feed drawer – Very good condition Codpfozh Il Ujx Afqegw – Used wood shredder Net price: 95,900 PLN Net price: 22,830 euro depending on exchange rate, 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: excellent (used), Catalogue number 7259 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 200 mm - Shaft width: 530 mm - Shaft diameter: 550 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 50x50 mm - 2 lower toothed feed shafts - Lower shaft motor: 2.2 kW - Upper toothed feed shaft - Upper shaft motor: 2.2 kW - Conveyor belt feeder: 0.55 kW - Feeder belt length: 3000 mm - Feeder belt width: 410 mm - Main motor: 45 kW - Auto-reverse - Reverse operation - Machine dimensions (L/W/H): 2900x1600x1600 mm - Feeder dimensions (L/W/H): 3070x720x670 mm - Weight approx. 3500 kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – Reverse function – Used shredder in very good condition Net price: 85,900 PLN Cjdpfx Afezh Ic Hjqsgw Net price: 20,450 EUR depending on exchange rate 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: used, Catalogue No.: 7536 – German-made – No engine – Used chipper TECHNICAL DATA Feed opening width: 530 mm Number of knives: 2 pcs Shaft diameter: 580 mm Feed opening width: 420 mm Feed opening height: 200 mm Cgsdpfx Afszh Iaxsqew Net price: 30,000 PLN Net price: 7,140 EUR (at 4.2 EUR rate) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 6825 TECHNICAL DATA - Loading hopper dimensions (L/W): 900x630 mm - Rotor working width: 540 mm - Motor: 7.5 kW - Sieve diameter: 20 mm - Knife size: 40x40 mm - Number of knives: 15 pcs - Auto-reverse - Pressing drawer - Dimensions (L/W/H): 2060x980x1580 mm - Weight: 1008 kg Cgodpfx Ajzh H U Usfqsw ADVANTAGES – German-made – Not repainted – Very good condition – Used shredder Net price: 31,900 PLN Net price: 7,590 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Catalogue number 7872 TECHNICAL DATA - Infeed width: 450mm - Infeed height: 200mm - Shaft width: 530mm - Shaft diameter: 480mm - Knife length: 530mm - Number of knives: 2 pcs - Screen size: 50x50mm - Lower toothed feed roller: 2 pcs Codpfx Afezh H Uneqsgw - Lower shaft motor: 0.75kW - Upper toothed feed roller: - Upper shaft motor: 0.75kW - Main motor: 45kW - Machine dimensions (L/W/H): 3600x1700x1400mm - Weight approx. 2200kg ADVANTAGES – German-made – Not repainted - No electrical box – Used chipper, good condition, for inspection Net price: 38,900 PLN Net price: 9,260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6114 TECHNICAL DATA - Loading hopper inlet: 800x1000mm - Rotor working width: 800mm - Pump motor: 0.75kW - Main motor: 15kW - Number of knives: 21 pcs - Knife dimensions: 30x30mm - Screen: 0.8x10mm - Pusher drawer - Electric auto-reverse - Discharge augers 2×1.1kW - Dimensions (L/W/H): 2460x1800x2250mm - Weight: 1660kg Cgedpfjzh H T Dox Afqjw – German-made – Auto-reverse – Pusher drawer – Unpainted – Very good condition – Used shredder Net price: 59,900 PLN Net price: 14,260 EUR (depending on the exchange rate, 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: new, operating hours: 2 h, Residue wood shredder WITHOUT hydraulic slide Motor power: 11 / 15 / 18 kW, 400 V, 50 Hz Rotor width: 595 mm Rotor speed: approx. 45 rpm Rotor diameter: 280 mm Screen: Hole size 7 to 30 mm (optional hardened special steel) Cutting edges: 34 pieces, 25 x 25 mm (hollow grind, 4-way reversible, hardened special steel) Cedpfx Ajhq T Udefqegw Counter knives: up to 2 pieces (2-way reversible, optional hardened special steel) Throughput*: up to 2 m3/h (*material-dependent) Material feed opening approx.: 600 x 350 mm Heavy-duty main bearings Compact control cabinet with modern PLC control & 5m cable length Suction diameter: 200 x 200 mm Dimensions L x W x H approx.: 1,050 x 1,180 x 1,890 mm Weight: approx. 900 kg 2000 hours warranty on the high-performance gearbox

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Csdpsgw Sxzefx Afqsgw Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2012, Hacker in like-new condition with only 280 operating hours. Rotor width 630 mm with a double row of knives. Codpjzhgw Aofx Afqjgw 30 knives on the rotor. Motor: 18.5 kW. Equipped with a hydraulic push floor.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 476 h, overall weight: 11,860 kg, power: 407 kW (553.37 HP), Engine: Deutz TCD 12.0 L6, 407 kW Year of manufacture: 2024 Serial number: 21060084 Location: NRW Total operating hours: 476 h Engine operating hours (new): 91 h Rotor operating hours: 207 h Availability: by arrangement Equipment: 2 horizontal infeed rollers 2 vertical infeed rollers Infeed size: 1000 x 625 mm Max. log diameter: Ø 620 mm Number of knives: 3 pcs. Counter blade: 1 pc. Capacity: up to 150 m³/h Weight: 11,860 kg Radio remote control Spiral fan HD infeed chain Baskets: 50, 70, 100 mm The machine is in excellent, like-new condition and can be inspected during chipping operations by arrangement! Cgjdpozcn Igsfx Afqow Warranty: The machine is sold in the condition it is in at the time of delivery. The seller assumes no liability for defects. We reserve the right to make interim sales, changes and repairs. This overview serves only as a source of information and does not constitute a binding offer.

Condition: excellent (used), Year of construction: 2001, CATALOGUE NO. 7089 TECHNICAL DATA - Loading hopper inlet 1020x1230mm - Rotor working width 1020mm - Rotor diameter 348mm - Main motor 22kW, 400V, 50Hz - Pump motor 0.75kW - Number of knives: 50 pcs - Knife size: 35x35x20mm - Sieve: 12mm - Hydraulic pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – Auto-reverse – Similar to WEIMA WL 10 – German made – Pusher drawer – Very good condition Cgjdpfjzfpy Uox Afqew – Used shredder, DTR+CE documentation Net price: PLN 99,900 Net price: EUR 23,790 based on exchange rate 4.2 EUR (Prices are subject to change with major fluctuations)

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Cgjdjzdz Rcepfx Afqew Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2022, operating hours: 300 h, functionality: fully functional, power: 100.03 kW (136.00 HP), overall weight: 5,500 kg, fuel type: diesel, The BBT 400 Woodzilla is a 360° rotatable, compact, powerful, mobile drum chipper with aggressive feed, mounted on a truck trailer chassis. Technical Data Year of manufacture: 2022 Operating hours: approx. 300 hrs Drive: Diesel, Deutz TCD 3.6, 100 kW (136 HP), Stage 5 Feed opening: 320 x 500 mm Chipping drum: 400 x 500 mm, 4 knives Max log diameter: 32 cm Codpfsx Ektxsx Afqsgw Infeed table length: 1300 mm Support: 4-way hydraulic Z-Crane Ben-Tele 550 2 additional feed rollers Radio remote control for chipper and crane Trailer towing eye: 40 mm Brake: Air brake system, Duomatic 2 additional feed rollers The machine is in like-new condition. Location: NRW Availability: by arrangement Warranty: The machine is sold in the condition it is in at the time of handover. The seller assumes no liability for defects. We reserve the right to prior sale, modifications and repairs. Didn't find what you're looking for? Then contact us!

Condition: used, color: orange, = Additional options and accessories = Cgsdpfoy S T A Njx Afqjw - Spare wheel

Condition: excellent (used), Catalogue number 7260 TECHNICAL SPECIFICATIONS - Loading hopper inlet: 870x730 mm - Rotor working width: 710 mm - Main motor: 18.5 kW - Pump motor: 0.75 kW - Number of knives: 19 pcs - Knife dimensions: 75x40 mm - Screen: 15 mm - Pressing drawer - Electric auto-reverse - Outlet for shredded wood: Ø 250 mm - Dimensions (L/W/H): 2350x1400x1670 mm - Weight: 1360 kg ADVANTAGES – Pressing drawer – Very good condition – Used wood chipper Net price: 32,900 PLN Net price: 7,830 EUR (based on exchange rate 4.2 EUR) (Prices may vary with larger exchange rate fluctuations) Cedpfxjzcd H Ej Afqsgw

Condition: excellent (used), CATALOG NUMBER 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm - Shaft diameter: 550mm - Number of knives: 2 pcs - 3 toothed feed rollers from the top and bottom, 2×2.2kW - Electric auto-reverse - Reverse mode - Belt conveyor - Conveyor length: 5100mm - Feed belt width: 400mm - Main motor: 30kW - Chipper dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm - Weight approx.: 3000kg – with belt conveyor – electric auto-reverse (adjustable) – reverse mode – used chipper, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR (based on exchange rate 4.2 EUR) Cjdpfx Aezccdpofqjgw (Prices may vary with significant exchange rate fluctuations)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant Cgodpfx Afsx Af Rdoqew The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.