Used Winter Gluemax Single B-300 for sale (53,393)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Total power requirement 0,5 kw Dsdevz E Tyopfx Am Rsch

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Dcsdsvz E Uwspfx Am Reh Total power requirement 0,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1500x1580 mm Weight 2300 kg Total power requirement 40 kw Dcodpfxsvz Hwyj Am Rjh

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1930x1580x1580 mm Weight 2250 kg Dsdovz Hw Tepfx Am Rech Total power requirement 32,57 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Dsdpfsvz E Tasx Am Rsch Total power requirement 0,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Total power requirement 0,5 kw Dodpfxovz Hdge Am Rjch

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4590x1100x2500 mm Weight 1000 kg Dcjdjvz E Iqjpfx Am Rsh Total power requirement 7,5 kw

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dodpofnvwqefx Am Roch Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: ready for operation (used), Siemens 6SL3120-1TE15-0AA4 Single Motor Module Version: B SN:T-FO6013590, used, in good condition, 100% functional, delivery scope as shown in the photos. Dcsdjx Euz Hjpfx Am Roh

Condition: used, Year of construction: 2001, swing diameter max. 450 mm chucking diameter 400 mm control Siemens 840D (Index) Max. rpm 4.200 min/-1 power capacity - main spindel ( 35,5 / 56 ) kW max. Torque ( 340 / 550 ) Nm C-Axis 0,001 ° number of toolpositions 2x 12 pos driven statition 2x 12 pos worktool system VDI 30 max. spindle speed driven tools 6.000 U/min. power capacity - driven tools 9,5 kW max. Torque 40%: 19 Nm Y - Axis +/- 90 mm B-Axis +270° / -90 ° x-axis 730 mm z-axis 340 mm y-axis +/- 90 mm b-axis +270° / -90 ° rapid traverse X: 40 / Z: 30 m/min numbers of pallets 24 pos. size of pallet 410 x 300 mm max. workpiecediameter 300 mm max. workpiece weight incl. Pallet: 25 kg Chain width 75 mm band speed 7,5 m/min Dsdpfjyq Sk Iox Am Roch total power requirement 56 kW weight of the machine ca. 9,0 t dimensions of the machine ca. 8,5 x 6,0 x 2,7 m CNC - Vertical Lathe INDEX - V 300 Y/B - incl. 24 pos. palett changing system Schnaithmann - incl. ball screw as spare part - incl. 39x driven tools - incl. 39x tool holders

Condition: reconditioned (used), CNC Vertical Machining Center HERMLE B 300 V With Heidenhain iTNC 530 path control Year of manufacture: 2014 Travel ranges: X 800, Y 600, Z 500 Speed range: 20 – 18,000 rpm, stepless With the following accessories: Fixed angular table, 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Air blow through the spindle center IKZ 40 bar Chip conveyor Tool measurement in the work area (BLUM laser) Coolant system Manual cabinet door, manual cabinet roof Polycarbonate safety panels Electronic thermal compensation iTNC 530 Electric hand control module HR 410 3D measuring probe Control cabinet cooler (RITTAL) Spindle oil cooler Chip flushing gun 4 adjustable machine feet Operating manuals Dcodpfxey U H Iqe Am Roh

Condition: excellent (used), Plastic crate Bito RK3109 Used, see pictures Type designation RK3109 basic size L x W 300 x 117mm height 90mm Colour pigeon blue Inner dimensions L x W x H 260 x 94 x 80 mm Volume 2 l load 6 kg Temperature resistance -20°C to +80°C Negotiation price: € 2,-- net per piece ex stock approx. 7500 pieces available, larger quantities on request. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by arrangement. Further information on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for and offering numerous items from a wide variety of areas broom-clean business clearances company liquidations Dsdjg Hi S Uspfx Am Rjch Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, hydraulic torque pump, torque wrench pump Dedpeivqm Eefx Am Roch -Manufacturer: HAWE, hydraulic unit -Type: MP 24-H 1.77/B 5-A 1/300- -Motor: 0.55 kW / 1390 rpm / 380 V -Pressure: up to 310 bar -Flow rate: 1.73 l/min -Individual components: see photos -Dimensions: 325/160/H295 mm -Weight: 19 kg

Year of construction: 2020, operating hours: 20 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ?, B-Max 300 Biomass / pellet boiler, directly from the NL importer. System with very few operating hours. In good condition, see photos. Dcjdpfx Amoyxtazs Reh

Year of construction: 2021, condition: as good as new (ex-display), Rotary vane vacuum pump oil lubricated Manufacturer: Leybold Type: Sogevac SV 300 B Cat. no.: 960702 Status: Feeding unit as good as new Dcjdpfxjb Enbre Am Rjh nominal suction capacity: ca.280 m³/h final pressure: ca.0,08 mbar w. gas ballast Warranty: 12 months accessories: manual, mineral oil filling

Condition: ready for operation (used), Siemens 6SL3120-1TE15-0AA4 Single Motor Module SN T-H56148980 A5E03721153 FS: B, used, in good condition, 100% functional, delivery as per photos. Dodpfxsx Euzmj Am Rjch

Condition: ready for operation (used), Siemens 6SL3120-1TE15-0AA4 Single Motor Module SN T-EN6081032 A5E03721153 FS: B, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dodpfex Euzgex Am Rjch

Condition: new, Siemens 6SL3120-1TE15-0AD0 Single Motor Module 5A SN: T-R16252840 FS: B, unused, in sealed original packaging, 100% functional, scope of delivery as per photos Dodpfex Dxguox Am Roch

Condition: new, Siemens 6SL3120-1TE15-0AD0 Single Motor Module 5A SN: T-R16252841 FS: B, unused, in sealed original packaging, 100% functional, scope of delivery as per photos. Dedpfx Amox Dxgze Rech

Condition: used, Year of construction: 1979, functionality: fully functional, Grinding wheel diameter: 600 mm Center width: 300 mm Center height: 180 mm Headstock Counter holder with pressure cylinder Dcsdpfsrvybtsx Am Rjh

Condition: new, Year of construction: 2025, Suction nozzle diameter: 300mm maximum volume flow: 6000 m³/h nominal volume flow: 5089 m³/h volume flow monitoring: pressure difference display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Djdjpfat Njpfx Am Rsch Sound pressure level: 70 db Shrew bag volume: 480 l Filter cleaning: mororic Engine power: 7,5 kW Extinguishing device: yes Machine length: 3245 mm machine width: 1030 mm Machine height: 2595 mm Weight: 780 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Year of manufacture according to seller: 2022 Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor. Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available. Dodpfx Aswhvrrom Roch

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 600 mm, table width: 1,000 mm, table length: 1,200 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 300 H-Type Single Acting Hydraulic Press – 8-Guided Sliders General Description The CRONOSSTECH CHP series H-type single acting hydraulic presses are high-rigidity, industrial press solutions developed for sheet metal forming, straightening, assembly, and die-stamping applications. The 8-guided H-frame construction ensures that the high loads generated during pressing are evenly distributed, resulting in stable and repeatable operation. The CHP 300 model is designed to provide long-lasting and reliable performance for medium to high tonnage production requirements. CHP Series – Structural Features CHP series presses are engineered considering heavy-duty conditions. The frame and carrier components are stress-relieved via vibration methods. Bronze Zr14 slide bearings ensure even load distribution during ram movement, contributing to the preservation of precision over extended periods. ⚙️ Standard Equipment - Steel construction, H-type frame press with 8 guided sliders - Stress-relieved frame and carrier components by vibration - Bronze Zr14 slide bearings - Welding applications certified by TÜRK-AK with WPQR & WPS approval (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - 7'' DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Monitoring of oil temperature and system status of the hydraulic unit via display - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 300 Dcedpfx Amox N T E Eo Roh Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 300 Tons Movable Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress relief Welding Application: Welding applications certified by TÜRK-AK with WPQR and WPS approval per EN ISO 15614-1/2017 (inspected by certified welding coordination engineers in line with EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/s Movable Table Forming Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 4400 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2200 mm Bottom Table Height from Floor: 1350 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 10.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 200 mm, table width: 1,000 mm, table length: 1,400 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, driven by force produced through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process safety due to their rigid frame structures. The CRONOSSTECH CEHP-TB-300 – H Type Eccentric Press 300 Ton, is designed for high-volume production with a focus on stable operation, die protection, and operator safety. Featuring a monoblock frame, 8-point guided ram system, hydraulic overload protection, and an automatic lubrication infrastructure, it delivers reliable performance suited to continuous production environments. Key Advantages • Stable operation for large dies with 1400×1000 mm table size • Die/equipment protection with hydraulic overload safety • Controlled and user-friendly operation via PLC with touch screen • High operator safety with light curtain protection • Low maintenance needs thanks to automatic lubrication infrastructure Applications • Punching / cutting / die forming operations • Mass production with automatic feeding lines • Heavy-duty die and high-tonnage production processes Standard Features • Steel construction frame • Pneumatic clutch & brake • T-slotted supplementary plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload safety • Motorized ram adjustment mechanism • Light curtain protection • Gear group in closed oil reservoir • Double solenoid safety valve • CE compliance Optional Features • Press feeding systems • Scrap discharge systems • Sliding safety cover at table front • Dies as per custom specifications Technical Specifications (CEHP-TB-300) • Capacity: 300 Ton • Table-to-ram distance: 500 mm Dedpox N Sdmefx Am Rech • Housing width: 1430 mm • Ram adjustment: 120 mm • Press width: 3100 mm • Press depth: 2550 mm • Press height: 4700 mm • Table size: 1400×1000 mm • Ram face size: 1400×1000 mm • Stroke (fixed): 200 mm • Motor power: 45 kW • Weight: 35,000 kg Production / Supply Note This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: excellent (used), Year of construction: 2018, operating hours: 2,006 h, functionality: fully functional, working width: 1,045 mm, area performance: 16,550 m²/h, overall weight: 2,635 kg, warranty duration: 12 months, tank capacity: 180 l, water tank capacity: 300 l, noise level: 92 dB, We offer a ride-on scrubber dryer Karcher B 300 R I D for sale. Catalogue number: 1.480-235.2 Year of manufacture: 2018 Operating hours: 2,006 h The machine is in very good condition—both visually and technically. It has undergone a comprehensive and detailed overhaul, making it fully operational and ready for immediate use. Every machine we offer is presented using actual photos—you buy exactly the machine shown in the pictures. All equipment purchased from us comes with a 12-month WARRANTY. Technical specifications: Drive type: Diesel Traction drive: Traction motor Working width (brushes) (mm): 1,045 Working width / suction (mm): 1,440 Water tank: clean/dirty (l): 300 / 300 Debris tank (l): 180 Theoretical area performance (m²/h): 16,550 Practical area performance (m²/h): 12,400 Battery supply (V/Ah): 12 / 80 Gradeability (%): 12 Brush speed (rpm): 460 - 460 Brush pressure (kg): 25 - 150 Water consumption (l/min): max. 12 Dcedpfxjw A Aw Dj Am Rjh Sound pressure level (dB(A)): 92 Permissible total weight (kg): 2,635 Dimensions (L x W x H) (mm): 2,490 x 1,570 x 1,860