Used Volpato 7/25 for sale (38,805)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser Nwsdpfx Akjuxfu Njisn - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Year of construction: 2008, condition: used, load capacity: 50 kg, plate length: 2,500 mm, plate width: 1,200 mm, stack height: 1,600 mm, TECHNICAL DETAILS Maximum panel width: 1,200 mm Maximum panel length: 2,500 mm Minimum panel width: 195 mm Minimum panel length: 250 mm Lifting capacity: 50 kg Operating performance: 18 cycles/min Maximum stack height from the ground: 1,600 mm MACHINE DETAILS Total installed power: 15 kW CE safety compliance: Yes Njdpfxez Ekcns Akiswn EQUIPMENT Removal of the panel stack via powered roller conveyor Vacuum pump WINDOWS control The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8347

Condition: used, Year of construction: 2024, operating hours: 698 h, functionality: fully functional, machine/vehicle number: APP889037, overall weight: 3,500 kg, total length: 5,760 mm, total width: 1,987 mm, total height: 1,973 mm, motor manufacturer: Cummins B6,7, power: 231 kW (314.07 HP), fuel type: diesel, volume flow: 19 m³/h, pressure (max.): 25 bar, Equipment: type plate available, We are offering this used Atlas Copco X-Air+ 750-25 reciprocating compressor, manufactured in 2024, for sale. Model: X-AIR+ 750-25 Max. operating pressure: 25 bar Speed: 1920 rpm Nwsdpfxjz A Daue Akion Engine power: 231 kW Permissible total weight: 3500 kg Support load: 70 kg Axle load, axle 1: 1765 kg Axle load, axle 2: 1665 kg Serial number: APP889037 Date of manufacture: 05/2024 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, functionality: fully functional, machine/vehicle number: 280127900474, Year of construction: 2008, operating hours: 2,231 h, power: 20 kW (27.19 HP), gearing type: automatic, battery capacity: 500 Ah, battery voltage: 80 V, empty load weight: 2,325 kg, motor model: elektrisch, Equipment: cabin, trailer coupling, Linde tow tractor 16t in decent condition with battery charger for sale due to insufficient use. Further details upon request. Nwsdpfxjw Niy Re Akijn

Condition: used, machine/vehicle number: 008785, Max width workable: 800 mm Max length workable: 2300 mm Max height workable: 200 mm Working capacity: 7 cicli/min Nwsdpfxsz S T Two Akisn

Condition: used, Year of construction: 2021, operating hours: 6,500 h, * Hitachi ZX250 LCN-7 * Year of manufacture: 2021 Nwedpfx Akoznq T Uoisn * 6,500 hours * 140 kW Isuzu engine * 28,300 kg * Variable boom extension * OQ80SW, fully hydraulic quick coupler * Air conditioning * Central lubrication system * 270° camera * GPS preparation

Condition: not inspected (used), Year of construction: 1994, functionality: unexamined, Part of a Lisec DGU line 2.5 x 2.0 m, 1992-1994, consisting of: Nwsdportp D Aofx Akijn RSV-27/25, 1992, frame set section PSL-25/20, 1994, assembling station Both machines are in working order and can be seen in our warehouse in Hofkirchen/Austria

Condition: reconditioned (used), Year of construction: 2016, operating hours: 20,564 h, turning diameter over cross slide: 742 mm, turning length: 700 mm, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, turning diameter over bed slide: 920 mm, overall weight: 4,700 kg, spindle nose: BMT 80, bar diameter (max.): 80 mm, CNC Lathe Manufacturer: DMG MORI Model: NLX 2500 Y | 700 Year of manufacture: 2016 Control system: Celos Mitsubishi M730U Technical specifications: - Turning diameter: 366 mm - Turning length: 700 mm - Swing over bed: 920 mm - Swing over cross slide: 742 mm - Max. spindle speed: 4,000 rpm - Drive power - main spindle: 18.5/18.5/15 kW - Max. bar diameter: 80 mm - Number of tool stations: 12 pos. Nedpfx Ajyvvt Sjkijwn - Tool interface: BMT 80 - X-axis: 260 mm - Z-axis: 795 mm - Y-axis: +/- 50 mm - Tailstock taper: MT5 - Operating hours: approx. 20,564 h - Power-on hours: approx. 28,664 h - Machine weight: approx. 4.7 t The machine has been refurbished with the following components: - Ball screws in X, Y, and Z axes - New main spindle - Complete maintenance package - Re-aligned and calibrated This puts the machine in like-new technical condition. Equipment & accessories: - Tool turret, 12 pos. BMT 80, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang length for driven tools: 100 mm - Scraper-type chip conveyor - High-pressure coolant system (5 bar) - Coolant shower at main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical interface for 150 mm oil mist collector - 4-color signal light - EtherNet/IP interface for automation 2 machines are available. Price per unit. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor Njdpfoxc In Sex Akiswn 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control

Condition: good (used), Year of construction: 1999, Lg 33922 Unwinding and guiding unit Nwedehuwacopfx Akijn SOPREM BRH 7-200-80U-1250 BAP Web width: max. 200 mm Coil weight: max. 1,250 kg Spreading range: approx. 380 to 430 mm Coil outer diameter: max. 1,300 mm Web thickness: approx. 0.8 to 3 mm Working direction: from right to left

Condition: ready for operation (used), functionality: fully functional, operating hours: 12,341 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load Capacity Load capacity: 2,500 kg Mast Mast type: Triplex mast with full free lift Lifting height: 6,430 mm Free lift: available Drive and Battery Drive type: Electric Battery type: Lithium-ion Battery year of manufacture: 04/2019 Battery voltage: 90 V Battery capacity: 268 Ah Measured idle voltage: 95.3 V Hydraulics Hydraulic valves: 3rd and 4th valve Fork positioner: Multi-directional fork positioner Side shifter: available MACHINE DETAILS General Manufacturer: Linde Type: E25 Year of manufacture: 2019 Operating hours: 12,341 h Own weight: 5,300 kg Dimensions Overall length: 3,650 mm Overall width: 1,150 mm Overall height: 2,824 mm Inspections and Service Service valid until: 09/2027 UVV (occupational safety) valid until: 09/2027 EQUIPMENT Full cabin without driver's door Heater Windshield wiper Tilt angle display White, non-marking tires LED work light (front) LED work light (rear) Road traffic lighting with turn signals Orange warning light Safety light (front) Safety light (rear) Rear view camera Comfort seat All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Nwjdpfx Aksz R D A Tsien Lot number: 254

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 12,589 h, load capacity: 2,500 kg, lifting height: 5,450 mm, free lift: 1,880 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: 1-pedal control Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 23x9-10 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 18x7-8 Rear tire condition: 40 - 60% Battery voltage: 80V Battery capacity: 6250Ah Battery manufacturer: Hoppecke Battery type: PzS Battery year of manufacture: 2013 Battery condition: 60 - 80% Description: If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other forklifts in stock. Please feel free to browse our website at fleischmann-foerdertechnik. We will gladly provide you with a quote for leasing and financing, as well as delivery at favorable conditions. We also offer trade-in options for Linde equipment, even if you do not purchase a device from us. The operating hours shown were recorded at the time of listing. Subject to prior sale, changes and errors. Njdpfx Aez Iumvekiswn Front work light, roof protection, windshield.

Condition: used, machine/vehicle number: 007667, Max width workable: 1100 mm Max length workable: 2500 mm Nodpfx Akeu H R Hmsiswn Max height workable: 250 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, TECHNICAL DETAILS General Information Year of manufacture: 2021 Operating hours: 3,269 h Condition: ready for operation Own weight: 4,113 kg Lifting Data Load capacity: 2,500 kg Lifting height: 3,670 mm Mast: Standard, 2W367 Fork carrier: FEM 2A Fork length: 1,200 mm Drive and Engine Drive: 4-cylinder diesel engine Fuel: Liquefied petroleum gas (LPG) Engine manufacturer: Doosan Engine model: PM02V Nwjdpez Scqajfx Akisn Tires Front tires: Superelastic 23 × 9–10, 80% Rear tires: Superelastic 21 × 8–9, 50% Dimensions Overall length: 2,650 mm Overall width: 1,200 mm Overall height: 2,480 mm Height: 2,480 mm

Condition: good (used), Year of construction: 2004, operating hours: 12,506 h, load capacity: 2,500 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, Toyota 62-7FDF25 Duplo 450, Side Shift, Diesel, 2004 A video can be sent via WhatsApp. We have a continuous stock; please see our website. Nwedpo Adr Hfjfx Akion Prices are ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Grundfos NB65-125/137 Centrifugal volute pump Nwodpfx Aj Ad Rbzokien Single stage centrifugal volute pump, 7.5Kw, 2910 RMP, 1916 Ltr/min, 3Ph

Condition: used, functionality: fully functional, operating hours: 4,950 h, fuel type: electric, drive type: Elektro, tractive force with load: 25,000 N, Tractor Condition: Ready for use and fully functional Technical condition: Good Front tires: Type: Superelastic Front tires: Condition: 60-80% Rear tires: Type: Superelastic Rear tires: Condition: 60-80% Battery: PzS Nodozydu Nspfx Akiswn Battery: Condition: 60-80%

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 4,429 h, fuel type: electric, battery capacity: 620 Ah, battery voltage: 80 V, battery weight: 1,558 kg, TECHNICAL DETAILS Fuel type: electric Front tire size: 21x8-9 (50%) Rear tire size: 7.00-12 (70%) Nwsdpfoza Dnkjx Akion MACHINE DETAILS Battery Nominal voltage: 80 V Nominal energy: 47.1 kWh Nominal capacity: 620 Ah Weight: 1,558 kg Cell type: 4 TPzS 620 Operating hours: 4,429 h

Condition: used, mileage: 199,500 km, power: 185 kW (251.53 HP), first registration: 06/2014, fuel type: diesel, overall weight: 11,990 kg, color: blue, gearing type: mechanical, emission class: euro5, loading space volume: 11 m³, loading space length: 7,120 mm, loading space width: 2,510 mm, loading space height: 600 mm, Year of construction: 2014, Equipment: ABS, * EuroCargo 120 E 25 flatbed, 7.20 m open body with 2 x trailer hitches * Tow hitch: ball head and ZAA coupling Njdpfx Akswruutsiswn * Vehicle number for customer inquiries: 4335 * Environmental sticker (green) * Ball head tow hitch, low position * Two-seater passenger bench * Rear axle air suspension * Euro 5 engine version * Tow hitch * ABS braking system * 2-line trailer brake connection * Cab rear wall with window * Engine brake, standard system * Electric window regulators * 7-pin trailer socket * Heated and electrically adjustable exterior mirrors * Front trailer brake connection, Duo-Matic coupling * Manual gearbox * Three-seater cab No liability for printing or typographical errors Sale exclusively to commercial customers Subject to prior sale and errors* Changes, prior sale and errors expressly reserved. The description serves for vehicle identification only and does not constitute a guarantee in the sense of the law of sale. The purchase contract description is binding. * TOP SERVICE + QUALITY * We are happy to provide a LEASING-FINANCING-HIRE PURCHASE offer * Warranty insurance available on request from the insurer * TÜV / UVV tail lift / tachograph testing and OBU installation available locally via our partners * 30-day export customs plates All export customs documents available on request, must be ordered individually * TOLL booking for Toll-Collect available in-house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * Constantly over 200 vehicles in stock

Condition: used, Year of construction: 1975, capacity 3000 x 725 mm Nwedpfx Akoz Rmxwoijn spindle bore 81 mm 3-jaw chuck maximum spindle speed 1600 rpm

Condition: used, sheet width 750 mm plate length 1250 mm plate thickness 4 mm table surface area 1600 x 1050 mm no. of strokes 180 Hub/min max. punching diameter 105 mm punching pressure 25 t total power requirement 4,0 kW weight of the machine ca. 1,8 t dimensions 1,9 x 1,9 x 1,7 m Punching and nibbling machine Nwsdpfxoxfb Hmo Akien - Digital readout for X and Y axis - Tool cabinet with tools

Condition: good (used), Earth cable for inert gas device, electrode device, stud welding device -Welding cable: Extension / connecting cable for stud welding device Nwedslbdlpspfx Akisn -Length: 25m -Plug: 4-pin -Transport dimension: 570/480/H130 mm -Weight: 17.8 kg

Condition: good (used), Year of construction: 1982, Piston compressor Manufacturer: BOGE Type: SB m770 Year: 1982 Max. pressure: 15 bar Tank: 500L. Nedpfx Aoxq Tlxekiewn Low operating hours.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,407 h, load capacity: 2,500 kg, lifting height: 3,670 mm, fuel type: diesel, mast type: telescopic, construction height: 2,460 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,262 kg, drive type: Diesel, Diesel Forklift Nwsdpsy Aqh Rjfx Akisn Load center: 500 mm ISO Class: ISO Class 2 = 1,000 – 2,500 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 23x9-10 Rear tires type: Superelastic Rear tires size: 21x8-9 Description: In addition to this unit, we also offer a wide range of forklifts and warehouse equipment. All our machines are serviced and inspected according to FEM4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are also happy to buy your used equipment — even if you do not purchase a vehicle from us. Leasing and financing options available on request at attractive terms. We are happy to provide you with professional and comprehensive advice on our vehicles. Side shifter, 3rd valve, rear working lights, front working lights, heating, soot filter, full cabin, CE certificate, safety light, interior mirror, joystick, beacon, wiper, single pedal, LED, seat.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 127, Year of construction: 2013, operating hours: 2,338 h, load capacity: 300 kg, fuel type: electric, motor manufacturer: STILL, gearing type: automatic, battery manufacturer: GEL, battery capacity: 620 Ah, battery voltage: 80 V, DGUV certified until: 09/2027, tire condition: 80 %, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), empty load weight: 4,000 kg, color: yellow, Equipment: CE marking, UVV, cabin, lighting, trailer coupling, Electric tugger 80V from STILL, series 127. Tractive force under load: 25000 kg Nwsdpfx Aoz A Trmokijn Equipped with sliding doors! Low operating hours! (2338 hrs) 80-620 gel battery with matching 80-80 charger Fully operational condition, enclosed cabin Can be rented nationwide Transport can be arranged Price excludes 19% VAT, ex warehouse 90518 Altdorf.