Used Unclamping Machine Indumasch V 206 for sale (83,284)

Condition: excellent (used), Year of construction: 2012, input voltage: 400 V, conveyor belt width: 850 mm, total width: 1,650 mm, total length: 8,100 mm, total height: 2,050 mm, For sale: Very well-maintained Midrange Croissant machine from Rademaker Brand: Rademaker Included: - Mould unit - V Moulder - Conveyor - Midrange Croissant machine Year of manufacture: 2012 Conveyor belts year: 2017 Documentation / electrical diagrams available Full pallet with spare parts Operating hours: 9,153 hours Capacity: approx. 7,200 pieces per hour Belt width: 850 mm Gsdpfx Afoxzt Riekobn It is possible to inspect the machine at our location. If you have any questions or comments, please feel free to contact us. Transport by arrangement. Kind regards, Leo Holland

Condition: new, Year of construction: 2020, operating hours: 200 h, functionality: fully functional, SHOWROOM machine, the advertised machine was never delivered and was only run for test purposes. Rotating doypack wrapping machine DEAP-8BT: The 8-station rotating horizontal filling and sealing machine fills and seals doypack stand-up and seals Doypack stand-up pouches with cycle times of up to 50 pieces per minute. minute. The compact design of the rotary machine is very space-saving and Gbodstuwf Ejpfx Afkjn flexibly adjustable to different bag widths. The rotary-type machines in the AP series are the cost-effective alternative to complex linear filling machines without time-consuming set-up times. The stand-up pouches are transported via a transported via a bag magazine and filled and sealed in 8 rotating workstations. sealed. Applicable products: The DEAP-8BT series reliably packs - Pet food - Cosmetics (shower gel, soap) - Food (e.g. muesli or dried fruit) dried fruit) - small parts Machine information: - Quick format change of the bags - Additional modules can be integrated (gas flushing, weighing systems, double sealing) - Touch panel control, with storable programs programs - Central gripper adjustment - Customized special design - for special widths or special feeding systems - up to 50 pieces/min (depending on bag size) Other information: - Safety standards: CE conformity, DIN standards - Noise level: Below 80 decibels according to DIN 45635 - Applicable bag types: Pre-made stand-up pouches, flat pouches, spout pouches, pressure seal pouches, slider pouches, gusseted bags, single-lip (depending on optional components - Film types: OPP/CPP, OPP/CE, PET, PE, laminated films, composite films - Product types: piece goods (screws, nuts, etc.), bulk goods (flour, nuts, etc.), liquids (sauces, paints, etc.) This advertisement refers to the packaging machine and not the multihead weigher.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 100 kg, Vertical Balancing Machine Max.Rotor Weight 100 kg Gbjdpfx Aeylqg Dofkjn Min.Rotor Weight 5 kg Min.Diameter 100 mm Max.Diameter 800 mm Engine Power 5.5 kW

Condition: used, Year of construction: 2016, machine/vehicle number: ZT 461, saw blade diameter: 250 mm, overall weight: 6,000 kg, type of input current: three-phase, total height: 2,150 mm, TECHNICAL DATA: - Length of the material: max. 4200 mm - Capacity in Width: max. 1500 mm - no. 2 cutting motors of 3 kW – 3000 r.p.m. (with inverter), with nose Ø 30 mm for saw-blades Ø 250 mm with inlet suction hoods with no. 2 safety guards with suction attachment Ø 80 mm - no. 1 milling motor for milling head (t): 5 kW – from 2000 to 3500 r.p.m. with inverter - with nose Ø 35mm for shaped mills Ø 360 mm with inlet suction hoods - no. 2 suction hoods for heads carriage Ø 160 mm - Self-braking brushless motor of 4,6 Nm for head-holder carriage advancement. - Cutting speed regulation from 2 to 30 m/min', max. return speed of the head 75 m/min' Gjdpfx Afey Iwh Iokjbn - Self-braking brushless servomotor of 2,2 Nm for pincers carriage advancement, positioning speed with regulation by CN from 2 up to 60 m/min' - Working table height: 990 mm - no. 2 fans for air pads: 1,1 kW - Supply power: 400 V/ 50 Hz - Total power employed: 20 kW - Machine color: grey RAL 7036 and grey RAL 7035 - Overall dimensions: 4730 x 7440 x 2150 H mm - Weight: 6000 kg approx.

Condition: like new (used), Year of construction: 2025, Column Drilling Machine BOMA SB 32 - V - CE marking - Exhibition machine / Unused - Morse taper MT 3 - Infinitely variable speed control - Thread cutting device up to M16 - Spindle speeds / Infinitely variable 50-2100 rpm - Spindle stroke 135 mm Godpfx Aeyrnm Usfkjbn - Worktable rotatable 360 degrees - Worktable size 415x375 mm - Column diameter 100 mm - Throat depth 250 mm - Distance spindle - table 850 mm - Distance spindle - base plate 1190 mm - Drill chuck - Documentation Dimensions: LxWxH 0.6x0.9x1.85 meters / Weight 280 kg Errors and omissions excepted

Condition: ready for operation (used), Year of construction: 1993, mobile, drilling from the front, 1 core drill D=34 mm, 2650 mm long, approx. 1200 mm deep, operating manual Gbsdpfxsx Ez Nke Afksn

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Gbodpfx Aozb Ipzefksn Coolant pump and tank

Condition: used, Year of construction: 2004, XYZ Proturn VL 355 ProtoTRAK CNC Gap Bed Centre Lathe Gbjdpfezav N Tex Afksn ProtoTRAK SLX Control (2004) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2004 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards 3 Toolholders TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79196 Machine Serial Number: SL091 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111254, MACHINE SPECIFICATION Table size 660mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Approximate weight 3220Kg MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control Swarf auger Filtermist extraction system 10 off assorted BT40 toolholders Programmable coolant nozzle Automatic lubrication system Lighting Gbodpfsyrrx Ujx Afksn Enclosed guarding

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, XYZ 500 LR Vertical Machining Centre (2018) Siemens 828D Control with Shop Mill, Optimised Digital Servo Drives, Rigid Tapping,Flood Coolant, Worklight, 12 Station Carousel ATC, Easy Clean Swarf Tray, Steel Concertina Guards on all axes, Powder Coated Guarding, Pull Studs, USB Port Technical Specification: Gsdpfx Ajy R S Unefksbn X Axis Table Travel: 500 mm Y Axis Table Travel: 400 mm Z Vertical Travel: 440 mm Table Size: 580 × 400 mm Spindle Centre to Column: 415 mm Spindle to Table: 100 – 550 mm Column Front to Table Centre: 215 – 615 mm Rapid Feedrate: 20 m/min Cutting Feedrates: 1 – 20,000 mm/min Max Table Load: 250 kg Spindle Speeds: 5 – 8,000 rpm Spindle Motor: 15 kW (20 hp) Spindle Taper: BT40 Toolchanger: 12 station carousel Toolchange Time: 8 seconds Max Tool Diameter: 100 mm Max Tool Weight: 7 kg Coolant Tank Capacity: 105 L Ballscrew: Grade C3, 28 mm dia P8 AC Digital Servo Motors: X = 8 Nm, Y = 8 Nm Max Torque Z Axis: 12 Nm, 3,000 rpm Machine Weight: 2,400 kg Footprint: 1,890 × 1,982 × 2,700 mm *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79114 Machine Serial Number: SMB0146 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2015, operating hours: 300 h, XYZ 560 Mini Mill 3 Axis Vertical Machining Centre Manufactured 2015 Siemens 828D Control Ex college machine less than 300hrs. Spindle Speeds 8000rpm Spindle Motor 15hp Spindle Taper BT40 Tool Magazine 12 Tools Tool Change Time 8secs X Axis Travel 560mm Y Axis Travel 400mm Z Axis Travel 500mm Table Size 610 x 370mm Spinde to Tabel 100 – 600mm XYZ Rapids 20m/min Cutting Feeds 1-20m/min Max. Table Load 300kg T Slots 16mm Machine Weight 3100Kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79162 Godpfx Afjy R Srgskebn Machine Serial Number: MF491 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ SLV Turret Milling Machine Manufactured 2011 Spindle Motor 5 hp Gbjdpfxoy R Skcj Afken Spindle Speeds 70 – 3600rpm Spindle Taper ISO40 Table Size 1473 x 305mm T Slot Size 16mm T Slots 3 off X Axis Travel 1000mm Y Axis Travel 410mm Knee Vertical Travel 413mm Ram Travel 450mm Supplied with: Power Feed Longitudinal (X) Power Feed Cross (Y) Powerd Knee 3 Axis Digital Readout Misc Spindle Tooling Machine Manuals Air Draw Bar We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79192 Machine Serial Number: 11501 £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA vibratory feeder (diameter: 800 mm) External reference: 34 Gbjdpfx Ajza Tcqefksn

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA Vibratory Feeder (diameter: approx. 800 mm) External reference: 33 Gsdpoza S Irefx Afkjbn

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Gbsdpfxsya H Nks Afksn Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe Gbsdpfx Aoxt Ibysfksn ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 1982, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 Hub/min angle adjustable from - to 30 - 120 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm * Machine with 1x new set of notching knives (!!) * installed in 2026 * approx. acquisition costs 1.000 Euro Equipment: - electro-hydraulic notching machine, with angle adjustment * Angle adjustment via hand wheels - Front control panel Gsdpfxjxaaiie Afkjbn - Plexiglas protection for better transparency - Hardened blades also for cutting stainless steel - Planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x cutting stops * with movable and replaceable stop bars - lateral cut material ejection - Freely movable foot switch - operating instructions

Year of construction: 2014, condition: excellent (used), Gainsborough Vertical Form & Seal Bagging Machine Continuous VVF Bagging Machine Complete with Markem-Inage SmartDate X40 Coder In Excellent Condition Has had very little use Gjdouct Ivjpfx Afkebn

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Godpfxexni Iqj Afkjbn

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 22207, Marinus Machines V&G 400 Series,Through Feed End Matching Machine,Serial Number 22207, Year of Manufacture 2000 In very good working condition. Maximum working length up to 6m, minimum working length: 500m/m Minimum working width: 50m/m, normal maximum width: 280m/m, 300m/m is possible with some adjustment of the tools. Total Power: Appr: 20kw, Feed Speed up to 20 pieces per minute,depending on length. Omron PLC Controls. Floor Size: W x D x H 2000 x 1650 x 1900m/m, Weight: Appr. 1750kg. Also with the machine is a 3m. Long Belt Conveyor, which could be used at the Infeed or Outfeed of the machine. Complete Safety Enclosure. With Operational & Electrical Manual. Location: Can be viewed in Burrowbridge,Somerset TA7 0SG Photos Available on your email or Mobile Phone WhatsApp. Godev Er Nispfx Afkjbn

Condition: excellent (used), Year of construction: 1997, VA 200/6 K Notching and Punching Machine Indumasch VA 200/6 K Notching and Punching Machine 2 in 1 Manufacturer: Indumasch Godpox Dtrfjfx Afkebn Model: VA206/K or DAV206 Year of manufacture: 1997 Hydraulic drive 5.5 kW Stroke adjustment: electric, with digital display Worktable (width x depth): 1,000 x 1,620 mm Net weight: 1,500 kg Workpiece holder: standard 2-in-1 – all advantages in a single machine from INDUMASCH! The first station offers stepless, angle-adjustable notching options from 30° to 140°. Additionally, a second station is located at the rear of the machine for operations such as pressing, punching, bending, cutting, and more. This model is ideally suited as a compact machine center for small-batch production and/or prototype construction. Advantages of the first station: – Automatic cutting gap adjustment – High-precision measuring tapes with five reading functions – Internal stop for cutting sheet strips to length – Clean cuts, seamless beyond the length of the blades – Cutting head steplessly adjustable from 30° to 140° – Blade length: 200 mm – Cutting capacity in mild steel: max. 6 mm – Cutting capacity in stainless steel: max. 4 mm Advantages of the second station: – Digital stroke adjustment – Quick-change tooling system for punching – Clear, well-organized worktable – Pressing force: 20 t – Throat depth: 300 mm – Maximum punching diameter: 90 mm Indumasch_Notching Machines Brochure

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding Gedpfxjt Dmlfj Afkobn

Condition: excellent (used), XYZ 710 VMC Vertical Machining Centre, Table Size 800mm x 445mm (Vac Table not included) with Siemens Sinumerik CNC Control, 24 Tool ATC, BT40 Spindle Taper, 8000rpm Spindle Speed, Filtermist FX5002 Extractor. S/No. SMT00054 Gjdsxvpffopfx Afksbn Delivery available on request, at extra cost. 14 day return or repair.

Condition: used, Year of construction: 1992, Max. sheet thickness: 4 mm steel Adjustable angle 30-120 degrees Blade length: 200 mm Hydraulic knife clamp and interlock Cutting depth continuously adjustable with digital display Godpfx Aetmyibsfksbn New top and bottom knife installed Weight: approx. 1,000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Gbedpfsxp Urdsx Afkjn Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting