Used Trumpf Component for sale (8,317)

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Nsdpfxozu Avzj Aqwsda Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: good (used), functionality: fully functional, Year of construction: 2006, The machine is being sold due to a plant modernization. Only 3,000 operating hours for laser cutting. Nedozlr Rpjpfx Aqweda Immediately available. Inspection and demonstration under power are possible by appointment. Technical data: Manufacturer: TRUMPF Model: TruLaser Tube 5000 (T01) Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Laser type: CO₂ laser TruFlow Working area, tube length: 6,500 mm Max. round tube diameter: 150 mm Max. rectangular profile / circumscribed circle: 150 mm Max. material weight: 20 kg/m Max. workpiece weight: 130 kg Automatic tube support Self-centering clamping system

Condition: good (used), functionality: fully functional, Year of construction: 2011, Trumpf TruLaser 5030 L16, including Liftmaster, in good condition, for sale. The machine is being sold due to a plant upgrade. Working area: 3,000 x 1,500 mm Laser source: CO₂ laser Nodpfx Aqezlttlsweda Laser power: 5 kW Year of manufacture: 2011 Control system: Siemens Sinumerik Max. sheet metal size: 3,000 x 1,500 mm Processable materials: Steel Stainless steel Aluminum Available immediately Inspection possible by appointment at any time.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Easier and more efficient entry into automated welding Automated arc welding cell for small and medium production runs – easy to operate and highly productive The welding cell impresses with its particularly simple operation and programming. With minimal training required, you can put the machine into operation, program it, and operate it; video tutorials are sufficient. Depending on the component and batch size, you can use the welding cell in a 1- or 2-station operation. For example, you can process either a larger component or smaller components in larger series in parallel. You will receive the system without a safety enclosure or as a fully equipped machine tool, TÜV-tested and with CE certification. This also includes extraction, an enclosure with glare protection, and safety technology according to TRUMPF standards. Technical details + equipment: Base model price from: €103,800 (without safety enclosure) Includes: 6-axis, collaborative industrial robot arm for easy programming Teach pendant with graphical user interface on a 12" touchscreen TRUMPF operating plugin for welding with predefined welding parameters for easy, direct programming on the robot Training & Services: Operator course Installation course 12 months warranty Remote service agreement in the first year Ndjdpozh I Hxefx Aqwoa TRUMPF quality All over the world, our fast remote service support takes care of your needs. You can find more technical data in the data sheet or on our website. If you have any questions, please do not hesitate to contact us. About TRUMPF: In our company’s history of over 100 years, we have been involved in the design of many thousands of sheet metal fabrications in Germany alone. We pass this experience on to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market, and experts in software, automation, and smart factories, you will always receive a customized offer tailored to your requirements. P.S.: We would also be happy to support you with financing. With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we are there to assist you with financial and entrepreneurial challenges.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,044 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, laser power: 6,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 fiber L76 FMC was manufactured in 2022. It features a working format of 3,000 x 1,500 mm and a powerful 6000W solid-state disk laser. The machine includes an automatic longitudinal pallet changer and advanced cutting capabilities, such as adaptive lens systems and automatic nozzle changers. If you are looking to get high-quality fiber laser cutting capabilities, consider the TRUMPF TruLaser 5030 fiber L76 FMC machine we have for sale. Contact us for further details. • Working format/area: 3,000 x 1,500 mm; X 0–3,000 mm / Y 0–1,500 mm / Z 0–115 mm • Machine design: Closed machine frame; gantry drive with direct linear drives; automatic longitudinal pallet changer; integrated control cabinets and storage cabinet; working-area lighting; machine status light; water/air machine and laser chiller; CE compliant; ambient temp 5–35 °C • Dynamics/accuracy: Max simultaneous axis speed 280 m/min; Ps 0.03 mm; Pa 0.05 mm; min programmable increment 0.001 mm • CNC control: Siemens SINUMERIK 840D sl with 21.5" color MultiTouch; MultiTouch HMI; USB and RJ45; integrated technology data; programmable cutting gas/pressure; production planning; multi-sheet processing; automatic shutdown; Remote Support interface; Condition Guide; Cutting Guide; Central Link; Online Update Manager • Laser source: TRUMPF TruDisk 6001 (6 kW) solid-state disk laser; fiber-optic beam delivery; one LLK output; closed beam guidance; high back-reflection resistance; stable output over service life • Cutting head: Universal cutting unit; single cutting-head strategy; adaptive lens system; protective glass with online condition monitoring; auto nozzle centering; collision protection; capacitive height control; automatic focal position; pilot laser • Standard cutting functions: AdjustLine; BrightLine fiber; ControlLine; FastLine; FlyLine; FocusLine; NitroLine; PierceLine; Performance package; Highspeed cutting package; Copper and Brass cutting packages; Micro-weld • Additional cutting package: Highspeed Eco (fusion cutting, medium-thickness stainless steel) with up to 70% cutting-gas reduction and up to 100% sheet throughput increase • Automatic nozzle changer: 21 positions; automatic change/cleaning/re-setting tied to material/process; reduces setup/handling • Drop&Cut: Integrated camera; assigns live image of residual sheet to part geometry; live cutting preview; no separate programming needed for basic use • Process monitoring camera: Front-area monitoring (~2.5 m); remote observation; preliminary result assessment; video stream output to external monitor • Pallet/material handling (machine-integrated): Automatic longitudinal pallet changer; loading/unloading parallel to machining; pallet access from three sides • 1 x license TruTops Boost Additional equipment • LiftMaster Compact 1530 (AL34) automatic loading/unloading system • Type 1530; max sheet 3,000 x 1,500 mm; min sheet 1,000 x 1,000 mm • Max sheet thickness 25 mm; max sheet weight 900 kg; max unloading weight 900 kg • With rake lifter: max thickness 25 mm; with rake lifter + belt system: max thickness 15 mm • Minimum part size with rake lifter: 150 x 150 mm Nodezuzwdspfx Aqweda • LiftMaster equipment/options • Storage connection; extended pallet travel out of machine • Sheet separation device; double-sheet detection; synchronous loading • Thin-sheet separation (0.8–2.0 mm); loading station for 90 mm stack height • Structural-steel loading grippers, 67 mm pitch, replaceable tines

Condition: good (used), Year of construction: 2013, 1 laser system with 1 loading station, 2 nests each - Up to 4 welding fixtures - Laser power: 3.3 kW - Beam source: Trumpf Trudisk 3302 disk laser - System manufacturer: Sitec - Operating hours: approx. 70,000 h - Max. workpiece dimensions: approx. 300 x 100 x 100 mm - Larger workpieces possible - Beam guidance via laser light cable (LLK) - Laser welding with Trumpf BEO D 70 welding optics on one axis system. - Inline laser monitoring system for weld seam monitoring Nedpfswm I H Ssx Aqwjda - Welding speeds: up to 5600 mm/min - Welding penetration depth: 1.5 mm - Welding with shielding gas possible! For aluminum or stainless steel - Fixtures can be water-cooled! - 2 rotary axes per table side, individually programmable PROGRAMMING: 4 cylinder clamping circuits per tool 10 inputs via slip ring rotary distributor 8 additional inputs per tool via radio system Inputs freely configurable via user interface (end position / part control / setup control) Clamping and release programs and part queries fully programmable via NC program No PLC programming required System fully programmable via Siemens control (G-code) Laser programmed via Trumpf TruControl and called via Siemens control (G-code). Output Guidelines T 1: 2 weld seams (each 100 mm in diameter, weld penetration depth = 1.5 mm) 2 components per side of the table approx. 250 parts per hour T 2: 17 weld seams (each 10 mm in diameter, weld penetration depth = 1.2 mm) 2 components per side of the table approx. 190 parts per hour The system can be viewed live!

Year of construction: 2022, condition: ready for operation (used), controller manufacturer: SIEMENS, table load: 3,000 kg, Automated sheet metal storage system manufactured in 2022. This TRUMPF Automated Sheet Metal Production System features a storage height of 7,900 mm and a maximum load per storage location of 3,000 kg. It includes 266 storage locations and supports sheet formats of 3,050 x 1,525 mm. If you are looking to get high-quality automated storage capabilities, consider the TRUMPF Automated Sheet Metal Production System we have for sale. Contact us for further details. • Storage system: STOPA Compact II • Type: Automated sheet metal storage system with chaotic storage management • Storage height: 7,900 mm • Sheet format: 3,050 x 1,525 mm • Maximum load per storage location: 3,000 kg • Number of storage locations: 266 • Total storage capacity: 798 t • Configuration: 8 sections/towers, up to 37 storage levels per section • Pallet format: GF 3050 x 1525 x 90 mm • Pallet types: SPO, SPMgl • Loading heights: 185 / 275 / 460 mm • Functions: Automatic material storage and retrieval; automatic material supply to connected production cells; storage interface for integrated production machines • Storage control • Server operating system: Windows Server 2022 • Central storage management and automated material flow management • Integration with TRUMPF production equipment • Connected production cells • TRUMPF TruLaser 5030 fiber (L76) • Machine type: CNC 2D fiber laser cutting machine • Working area: 3,000 x 1,500 mm • Laser source: TruDisk 6001, 6,000 W • CNC control: Siemens SINUMERIK 840D sl • TRUMPF TruMatic 6000 fiber • Machine type: Combined CNC punching and fiber laser cutting machine • Working area: 3,050 x 1,550 mm • Laser source: TruDisk 3001, 3,000 W • Maximum punching force: 180 kN • Linear tool magazine: 25 positions • TRUMPF TruBend Center 7030 (B34) – Cell 1 • Machine type: Automatic panel bending center • Max bending length: 3,123 mm • Max thickness: structural steel 3.0 mm; stainless steel 2.2 mm; aluminum 4.0 mm • Max box height: 220 mm Nedpfx Aqezu Sugewsda • TRUMPF TruBend Center 7030 (B34) – Cell 2 • Same specifications as Cell 1 • System functionality (summary) • Central automated storage and retrieval of raw sheet material • Automatic supply of material to connected laser, punch-laser, and panel bending cells • Automatic transfer between storage and production stations • Centralized, high-capacity sheet handling • Main system configuration • 1 x STOPA Compact II automated sheet storage system • 1 x TRUMPF TruLaser 5030 fiber 2D laser cutting cell • 1 x TRUMPF TruMatic 6000 fiber punching and laser cutting cell • 2 x TRUMPF TruBend Center 7030 automatic panel bending cells Additional equipment • For TRUMPF TruLaser 5030 fiber (L76) • Automatic pallet changer • LiftMaster Compact 1530 (automatic loading and unloading) • STOPA storage connection/interface • For TRUMPF TruMatic 6000 fiber • SheetMaster 3000 x 1500 mm (automatic sheet handling) • GripMaster 3000 x 1500 mm • Storage system integration/interface • For TRUMPF TruBend Center 7030 (both cells) • 2-axis part manipulator • 5-axis rear stop • Rotary manipulator • ToolMaster Bend • Automatic loading and unloading • Storage interface • System-wide • Central storage management server (Windows Server 2022)

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0270 A0115, control type: CNC control, laser power: 5,000 W, sheet thickness (max.): 20 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 160 A, input frequency: 50 Hz, compressed air connection: 7 bar, For sale: TRUMPF TruLaser 5060 laser cutting machine, laser power 5,000 W, manufactured in 2007. The machine is fully operational, currently connected in production, and can be inspected while powered on by appointment. Technical data: Manufacturer: TRUMPF Model: TruLaser 5060 Machine type: A0270 Machine no.: A0270A0115 Year of manufacture: 2007 Laser power: 5,000 W Power supply: 400 V / 50 Hz Rated input: 105 kVA Required fuse protection: 3 × 160 A Control voltage: 24 V DC Compressed air: 7–10 bar Nitrogen N₂: 30 bar Oxygen O₂: 20 bar Included equipment: Ndjdpjzgc Hwefx Aqwja KLH Kältetechnik chiller, type L30/36-TK3.02 Refrigerant: R134a, filling quantity 21.5 kg Hante MF-L extraction/filter unit Air volume: 2,500 m³/h Filter area: 50 m² Standard accessories as per agreement Condition: Used machine, fully functional and currently connected in production. Inspection while powered on is possible in Košice, Slovakia. Sale with invoice. Price is net, VAT not included. Dismantling, loading, and transport are at the buyer’s expense and responsibility. The machine will be available for collection approximately from 09/2026, or by agreement. Location: Košice, Slovakia

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control Ndjdpfxjzv Saro Aqwja - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,500 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Machine construction: Welded steel frame; bending system: Wedge drive; crowning: Included, adjustable via machine control • Manipulation and positioning • 2-axis part manipulator with suction cups (X travel 2,653 mm; stroke 100 mm; 12 suction modules) • 5-axis rear stop; rotary manipulator; front stop; loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop speed: 3,000 mm/s • Part manipulator speed: 3,000 mm/s • Rotary manipulator speed: up to 3 rev/s • ToolMaster Bend speed: 2,400 mm/s • Positioning accuracy • Y-axis: 0.10 mm; X-axis: 0.05 mm; R-axis: 0.05 mm • CNC control • 21.5-inch touchscreen; OS: Windows 7 Ultimate 64-bit • Keyboard and mouse; USB; RJ45 network; Ethernet 10/100 Mbit/s • Internet teleservice / remote diagnostics • Bend angle measurement • Optical bend-angle assistance; integrated camera; graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety equipment • CE certification; rotating safety doors; safety light barriers; working-area access protection • Foot switch with enable function; emergency stop • Electrical data: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation/feeding/transfer; automatic finished-part unloading • Belt conveyor for finished parts; max blank size 3,048 x 1,500 mm • Storage interface included • Loading trolley: Not included; Rail set: Not included Ndsdszvdc Sopfx Aqwoa • Tooling and tool systems • ToolMaster Bend: Automatic hold-down tool positioning and setup; automatic positioning of standard, Pick&Place, and curved holders • Included tooling: 16 standard hold-down tools (160 mm each); 6 Pick&Place hold-down tools; Pick&Place segments 10/15/20/40 mm; corner hold-down tool (199 mm); OBW90 and UBW90 bending tools • ENW equipment: ENW function for tilting hold-down tools; ENW110-40 tool (length 3,123 mm; depth 40 mm); min bending width with ENW tools 40 mm • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules; 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Software and data capture • TecZone Fold floating license: automatic programming from 2D/3D data, automatic bending program generation, 3D simulation, collision checking, manual modification • Wireless 2D code reader with Bluetooth: barcode and DataMatrix reading; automatic production program loading

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Nsdpfszlpb Sjx Aqwjda Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: B0501A0285, functionality: fully functional, operating hours: 6,560 h, input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, stroke length: 215 mm, operating speed: 220 mm/s, reverse speed: 220 mm/s, table width: 100 mm, table length: 1,275 mm, table height: 950 mm, throat depth: 420 mm, clearance between the columns: 1,040 mm, total length: 2,190 mm, total width: 1,740 mm, total height: 2,375 mm, overall weight: 4,900 kg, Equipment: CE marking, documentation/manual, safety light barrier, I am offering my well-maintained TruBend 5050 for sale. It has no defects, no quirks, and no hidden costs. You are welcome to inspect and test it at any time. I can also take care of the loading. The setup is also not complicated. The buyer is responsible for arranging the shipping. This machine is being offered for sale solely for tax-related reasons. We do not need to and, above all, do not want to sell it below its market value, as it is very reliable and we have grown attached to it. Anyone who is genuinely interested is welcome to contact me. And yes, these are the original operating hours. Nothing has been replaced, falsified, or anything of that nature. The machine has been used very little by both the previous owner and us. The last maintenance was some time ago, but everything else is in absolutely original condition. From the operating manual to the last screw. Ndedpfozlutaex Aqwea

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: Numer fabryczny maszyny B0503A0341, functionality: fully functional, operating hours: 29,000 h, For sale, a used TRUMPF TruBend 5085 edge bending machine, manufactured in 2009. The machine is in unique technical condition – very good! The machine has a low number of operating hours – 8250. In 2020, the control system was replaced with a new one at an operating hour count of 20500. The actual total operating hours of the machine are 29000. Machine serial number: B0503A0341 Hydraulics: Hoerbiger Year of manufacture: 2009 Maximum pressing force: 850 kN Working length: 2720 mm Opening: 415 mm, Throat: 420 mm Power: 17 kW Voltage: 400 V Hydraulic oil tank capacity: 120 l Hydraulic system pressure: 300 bar Weight: 7800 kg Tool type: hydraulic Wila / Trumpf Control system: TASC 6000 - Upper drive in a four-cylinder version Y1/Y2 - 4-axis back gauge - X, R, Z1, Z2 Hydraulic upper tool clamping system WILA Hydraulic lower tool clamping system WILA CNC crowning BendGuard Preparation for ACB Nodpsy Tluysfx Aqwoda

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. Trumpf TruPrint 3000 G02 with the options Zirox Sensor, Single Laser, and Powder Bed Monitoring. Trumpf TruPrint 3000 including filter system. Serial number: S0721Q0022 Laser performance: Laser beam on 17,508 hours. The system was finally used with aluminum AlSi10MG. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation before disassembly. All axes are properly secured. The machine can be transported on a standard truck. Accessories: 4 dosing containers 1 construction cylinder 1 overflow container Various spare parts such as protective glass, etc. Manuals The Armanni CAR.Elev pallet truck. A container changer is also in stock and can be offered as an option. Fast to high-quality 3D components D1. Machine concept The TruPrint 3000 is a universal medium-format machine with external parts and powder management for the industrial production of complex metal components using 3D printing. Its large build volume offers high flexibility in terms of the size, quantity, and geometry of the respective application. Technical specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium, or precious metal alloys. Build rate 6 cm3/h 5 - 60 Layer thickness 7 μm 20 - 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 - 500 O2 concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring - Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Nedpfx Aqovu Ticswsda Shielding gas - Nitrogen, argon Power supply V / A / Hz 400 - 32 - 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The information in our offer and order confirmation is authoritative. Technical data TruPrint 3000 Table 3

Condition: ready for operation (used), Year of construction: 2013, controller manufacturer: SIEMENS, number of axes: 3, This TRUMPF TruLaser 3030 (L20) was manufactured in 2013. A robust CO2 laser cutting machine, it features a Siemens control system, a laser power of 3200W, and workpiece dimensions of 3000 x 1500 mm. With a travel speed of 140 m/min, it ensures efficient operation. Consider the opportunity to buy this TRUMPF TruLaser 3030 (L20) CO2 laser cutting machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Nsdjzvu Skspfx Aqwoda • Working hours / laser beam on 49000 h • Longitudinal travel x-axis: 3000 mm • Cross travel y-axis: 1500 mm • Height travel z-axis: 115 mm • Travel speed: 140 m/min • Workpiece dimensions: 3000 x 1500 mm • Laser power: 3200w • Type of laser: truflow Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Press force: 300 t Bending length: 4050 mm Distance between uprights: 3550 mm Control system: EHT EPS D01-3D Total power requirement: 30 kW Machine weight (approx.): 24,000 kg Machine height: 3.60 m Operating hours (approx.): 12,000 h Accessories/Equipment: Rear back gauge system, 5-axis Travel range and back gauge area Travel range X-axis: 600 mm Max. back gauge range in X: 1000 mm Travel range X1-axis: ± 125 mm Travel range R-axis: 200 mm Travel range Z-axis: 3150 mm Accuracy Positional deviation of the axes X-axis: 0.02 mm X1-axis: 0.02 mm R-axis: 0.05 mm Z-axis: 0.05 mm Speeds X-axis: 1200 mm/s Ndsdpfszt R A Hex Aqwoa X1-axis: 300 mm/s R-axis: 200 mm/s Z-axis: 1200 mm/s

Condition: excellent (used), Year of construction: 2013, operating hours: 55,200 h, functionality: fully functional, machine/vehicle number: A0035A0294, Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500 We are the first and only owner of the machine. Machine with complete history and service documentation. Machine is in fully working order and in continuous operation. Ndjdjzd U D Nepfx Aqwoa Technical data: Width 6500 mm Depth 6203 mm Height 2252 mm Max. punching sequence (E = 1 mm) 1000 1/min Max. punching sequence – marking 2500 1/min Punching mode, X-axis 2500 mm Punching mode, Y-axis 1250 mm Max. sheet thickness 6.4 mm Max. workpiece weight 160 kg Max. punching force 180 kN Multitool tool change time 0.3 sec Number of tools/sheet clamps | 18 pcs / 2 pcs Max. part size, part flap when punching 500 mm x 500 mm Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm Average power consumption with active automatic shutdown 0.3 kW Average power consumption during production 5.6 kW Additional, non-standard machine equipment: 1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control. 2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed. 3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal. 4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology. An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended. 5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies. 6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option). 7) Second locating pin: the pin is located on the outside on the right side. 8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling. 9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process. We invite you to contact us.

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Nodpfxezu Hlye Aqweda

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, operating hours: 77,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TrumaBend V1700S / 4m bending length Year of manufacture: 2006 Nodpfozrnrcjx Aqweda Press force: 1700 kN (170 tons), bending length: 4080 mm Machine operating time: 77,000 hours, hydraulic operating time: 48,000 hours New IPC (KEBA 5) Configuration 1 active bending aid, 2 support consoles 4-axis back gauge CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V • Frequency: 50/60 Hz • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density Ndjdpfx Aezu S Dbjqwsa • Optional accessories: • 1x build cylinder • 2x powder supply cylinders • Cooler • Pallet truck • Unpacking station • 2x new filters • 11x aluminum build platforms • Vacuum conveyor system • Sieving machine with control unit • Optional accessories year: 2017 • Optional accessories condition: very good Availability: approx. Q3/2026

Condition: ready for operation (used), TRUMPF 150 MQ VIS focusing optics SN:1277242-00769 + SN:1277243-00865, used, normal signs of use, 100% functional, scope of delivery as per photos. Ndsdszu Hlmopfx Aqwsa

Condition: used, Year of construction: 2011, laser hours: 68,800 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, We are offering this used TRUMPF TruLaser 3040 laser cutting machine, manufactured in 2011. Material number: 1441919 Control cabinet: TruLaser 3040 Power type 3: 50 Hz Voltage: 400 V Max. fuse rating: A Wiring diagram / version: 93730-5-210_05 Wiring diagram / version: 93730-5-2000_05 Wiring diagram / version: 93730-5-3000_05 Serial number: 933 Year of manufacture: 2011 Equipment number: A1240A0148 Ndjdpfxjzvbhxe Aqwoa If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2011, machine/vehicle number: E1053A0497, overall weight: 850 kg, For sale is a TRUMPF TruDisk 4002 (4C) disc laser / laser source, including a separate KLH cooling unit RW 20/0 SK. Laser technical data: * Manufacturer: TRUMPF Laser GmbH + Co. KG * Type: TruDisk 4002 (4C) * Year of manufacture: 01/2011 * Laser power: 4,000 W * Equipment No.: E1053A0497 Njdpfx Aqozvqfyewjda * Supply voltage: 380 V (-10%) to 460 V (+10%), 3 AC + PE * Frequency: 50–60 Hz * Connection power: 23 kW / 25 kVA * Rated current: 34 A at 400 V * Protection class: IP54 * Weight: approx. 850 kg Cooling unit: * Manufacturer: KLH Kältetechnik GmbH * Type: RW 20/0 SK * Year of manufacture: 2017 * Part No.: E123223000AA * Serial number: 17KLH00670 * Voltage: 400/460 V * Frequency: 50/60 Hz * Refrigerant: R134a * Refrigerant quantity: 3.7 kg The TruDisk 4002 is offered together with the KLH cooling unit shown in the picture. Inspection is possible by arrangement. Further technical information and images can be provided upon request.

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, overall weight: 12,000 kg, total height: 2,400 mm, This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information. Additional equipment • Closed machine frame with an integrated laser unit • Torque drive combined with direct linear drives • Enclosed beam delivery via fiber optic cable • Water-air chiller for machine cooling • Integrated electrical cabinets with internal lighting • Automatic pallet changer (lengthwise installation) • Power supply through TruDisk integrated into the machine • Working area lighting • Wide longitudinal conveyor • Positioning laser diode Machine Benefits Technical Machine Benefits • Positioning accuracy: 0. 05 mm • Laser rated output: 3000 watts Extra Information The LiftMaster is included with the machine. Dimensions Ndedezvv A Dopfx Aqwsa Machine Depth 9950 mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, controller model: Basis Bosch Typ 3, Standard equipment: Machine - Working area 2500 x 1250 mm - Rotatable tool holder - Automatic repositioning with clamping device - Automatic tool changer with 19 stations - 2 clamping jaws - Programmable clamping device with pre-selectable - Clamping force - Dividing slide 200x200 mm - Part sorting into 2 containers - 2 good part containers - Ball tables - Tool spray lubrication - Punch scrap extraction - Scrap container - Quick shut-off for hydraulics - 10.4" TFT color screen - 3.5" floppy disk drive - Graphics programming ToPs 2000 - ToPs 2000 - Software package for PC (CD-ROM) - Safety light curtain, 2-beam - RJ45 network connection - Network connection including installation Extended machine equipment - Multitool function - Thread forming function - Marking/fast beading function - Roller tool function - Vibration-damped installation Automation - Loading and unloading device - Extended pull-out for raw material trolley - and unloading platform - Manually movable raw material trolleys Ndjdpfx Aezv Txpjqwoa - Scrap extraction system - Stop system with spread magnet - Sheet metal thickness gauge - Suction frame for loading - Gripper for unloading