Used Transformer 150 Va for sale (13,355)

Condition: used, operating hours: 49,800 h, machine/vehicle number: CAT0000LGZN00768, fuel type: gas, motor manufacturer: Caterpillar G3520C, General information Year of manufacture: 2009 Field of application: Construction Weights Empty weight: 17.500 kg Functional Generator capacity: 2.150 kVA Dimensions of cargo space: 7 x 2 x 27 cm Other information Fuel consumption: 8895 Btu/ekW-hr Generator: Caterpillar SR4B Frequency: 50 Voltage: 400 Drill equipment: Control Panel Additional information Please contact Team DPX for more information Prjdpfxozpdn Ie Akijc = Additional options and accessories = - Control Panel

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 Psdpfx Akouxfu Njisrc - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, nominal power (apparent): 63 kVA, secondary voltage: 200 V, type of output current: three-phase, output voltage: 200 V, Equipment: documentation/manual, type plate available, Dry type transformer 3 phase transformer 63 kVa p 3x400V/sz 3x200 V 63kVa 3 phase transformer for sale in excellent condition Manufacturer: Trafó Print type: BTZ63000 power: 63kVa U PRIMARY: 3X400V (3x125A) U SECONDARY: 3X200V frequency: 50Hz GE Record D250 compact circuit breaker steel housing Prjdpeydrgpofx Akioc

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer Prodpoh Hbxiofx Akijc -Manufacturer: Block, transformer type B 9412234 -Power: 8000 VA -Technical data: see photo identification plate -Number: 6 x transformer available -Price per piece -Dimensions: 295/120/H280 mm -Weight: 32 kg/pc.

Condition: good (used), Hang 150 Double-Head Riveter for Binders Manufacturer: Hang Germany Pedpfx Ake Af E Irsijrc Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Cardboard thickness: 0.2-4mm Throat depth: 310mm Head spacing: adjustable from 35-440mm Cycle time: 0.5s Weight: 570kg Power supply: 380V The cycle is initiated by a foot pedal.

Condition: good (used), Duplo DSC-10/20 + DBM-150 + DBM-150T Booklet Making Line This machine is in very good condition and is the latest booklet making system from Duplo. Made in Japan, 2018. Controlled via a control panel. The line consists of: – DSC-10/20 collator – vacuum feeding – LUL-HM manual feeder connector – DBM-150 stitching and folding unit – stitching and folding in one unit Psdpfxj Af E Ifj Akijrc – DBM-150T front trimmer – Long outfeed table – Built-in stacker for stacking sheets. The machine includes documentation, small parts, etc.

Condition: new, machine/vehicle number: CAT00C71JGTY02008, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Year of manufacture: 2025 Field of application: Construction Weights Empty weight: 1.918 kg Functional Generator capacity: 150 kVA Dimensions of cargo space: 352 x 113 x 181 cm CE mark: yes Other information Generator: Caterpillar LC 3114H Frequency: 50 Voltage: 400 Pjdpfx Akswqkn Tsijrc Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 349 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Tramag Fürth, transformer type CST from injection molding machine Demag D 100-275 NC -A-No.: 80258 . 06520365 Pjdpfxjn H Eucj Akisrc -Power: 1100 VA -Technical data: see photo nameplate -Dimensions: 240/120/H220 mm -Weight: 16 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Müco, single-phase transformer type EST 160 -Power: 160 VA -Voltage: 230V 50/60Hz -Technical data: see photo type plate -Dimensions: 100/80/H100 mm Prodpfeub D Scjx Akiec -Weight: 2.3 kg

Condition: good (used), Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, transformer, auto-transformer -Manufacturer: OCE Montecchio, Auto-Transformer Type CEI 14-6 Prjdpfx Akjw S Dm Djisc -Power: 400 VA -Technical data: see photo type plate -Dimensions: 120/110/H125 mm -Weight: 5.8 kg

Condition: excellent (used), Year of construction: 2023, operating hours: 12,320 h, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 4,020 h, spindle nose: SK 40, number of slots in tool magazine: 120, Universal Machining Center + Robot Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: 2023 / 2025 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed ​​range - main spindle: 20 – 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: Dia. 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 pos. Feed rates: Rapid traverse (X/Y/Z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4,020 h Technical features & accessories: - Active spindle cooling - Direct measuring system in all axes - Scraper-type chip conveyor with self-cleaning screen - Internal coolant supply (IKZ) 40 bar, comprising: - Paper belt filter - 600 l tank - Cabin roof - Rotary union in spindle - Duplex filter - Air blast through spindle center - Rotating viewing window - Chip flushing gun - Oil and emulsion mist separator - Infrared touch probe, make Heidenhain TS 460 (if present) - Tool measurement - Heidenhain TT160 (if applicable) - 3D quickSET preparation - PH Cell automation interface, comprising: - Interface - 4-channel rotary union - Automatic loading door - Operating mode 4 - Tracy peripheral surface interpolation - PH 150 pallet loading/unloading system, comprising: - 10-station pallet magazine - External electronic handwheel (if applicable) Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Pedpfx Akj Agr I Dsijrc Unless otherwise agreed, sales between businesses (B2B) are always made without warranty.

Condition: new, machine/vehicle number: 20260420004, fuel type: diesel, motor manufacturer: Perkins 1106A-70TG1, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 1.666 kg Functional Generator capacity: 150 kVA Dimensions of cargo space: 311 x 113 x 135 cm CE mark: yes Prjdpfxeyt Aq Rj Akijc Other information Fuel consumption: 22,7 Liter / Hour at 75% Load Generator: Leroy Somer TAL A44H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 185 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: good (used), functionality: fully functional, Year of construction: 2007, 9000 seedlings, large pick-up attachment, rotary feeder, netting tie. Psdezr D Rbopfx Akisrc

Condition: new, machine/vehicle number: FGWPEP75TDM801889, fuel type: diesel, motor manufacturer: Perkins 1106A-70TG1, General information Year of manufacture: 2026 Field of application: Construction Prodpfex Svifox Akioc Weights Empty weight: 2.100 kg Functional Generator capacity: 150 kVA Dimensions of cargo space: 352 x 112 x 198 cm CE mark: yes Other information Fuel consumption: 22.6 L/Hour at 75% Load Prime Generator: LL3114H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 289 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: used, KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinder engineered for high precision, top accuracy and reliable production. Capacities: centre height 175 mm, distance between centres 1500 mm, Z-axis 1650 mm, workpiece weight on centres max. 150 kg; grinding wheel Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); max wheel travel 320 mm. Key specs: wheel speeds stepless 1000–2150 rpm (peripheral speed 45 m/s); feed 7500 mm/min; work spindle swivels -10/+100° with 8–800 rpm; permitted load 160 Nm; grinding spindle motor 7.5 kW; work spindle motor 2 kW; 3×400 V 50 Hz; rapid 15 m/min; approx. weight 6000 kg; dimensions 4700×2300×2000 mm; air 6 bar. Accessories: coolant system, paper filtration, MARPOSS touch probe, set of grinding wheels, rotary centre, set of centers, set of workpiece drivers, set of throat gauges, lamp, 2 tool cabinets, tailstock with fine adjustment, oil mist extractor, spindle nose for collets. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tool Prjdpfx Akoyxn Itsioc

Condition: used, operating hours: 250 h, machine/vehicle number: FGWEPES1VLPS02748, fuel type: diesel, motor manufacturer: Perkins 2806C-E16TAG2, General information Year of manufacture: 2005 Field of application: Construction Weights Empty weight: 5.500 kg Functional Generator capacity: 500 kVA Dimensions of cargo space: 580 x 162 x 255 cm Pjdpo Aftrxjfx Akisrc Other information Fuel consumption: 80.3 Liter per Hour at 75% Load Generator: FG Wilson LL6014H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 950 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: good (used), Transformer, converter, inverter, three-phase autotransformer Predpfx Asb S Htdekisc -Input: 220 V -Output: 29.5 V 17 A -Technical data: see photos -Quantity: 2 available -Price: per piece -Dimensions: 140/120/H120 mm -Weight: 12 kg

Condition: new, Bernardo universal lathe Solid 460 x 1500 Pro Vario Technical specifications center width: 1500 mm center height: 230 mm Swing diameter over bed: 460 mm Swing diameter over cranking: 690 mm Swing diameter over cross slide: 274 mm bed width: 300 mm spindle bore: 80 mm spindle mounting: DIN 55029, D1 - 8 Speed range, 2 steps: 25 - 250 / 250 - 1700 rpm range of longitudinal feeds: (42) 0,031 - 1,7 mm/rev Range face feeds: (42) 0.014 - 0.784 mm/rev Metric threads: (41) 0.1 - 14 mm inch threads: (60) 2 - 112 Gg/1" Pedpjnfu Amjfx Akijrc Quill diameter: 60 mm quill travel: 130 mm quill mount: MK 4 Motor power: 5,5 kW (7,5 PS) Machine dimensions: (W x D x H) 2750 x 1080 x 1370 mm weight approx. 2050 kg Scope of delivery 3-axis digital display ES-12 V with LCD display 3-jaw chuck PS3-250 mm / D8 Fixed steady rest - passage diam. max. 150 mm Moving steady rest - passage diam. max. 110 mm Initial filling with Shell Tellus 46 Clamping disc 450 mm Quick-change toolholder with 4 inserts Safety device for quick-change toolholder Foot pedal with brake function according to CE Coolant device Frequency converter Slipping clutch Change gears Reducing sleeve 2 centering points Threaded clock LED machine light Chip rear wall Operating tool Rapid traverse longitudinal and plane

Condition: new, machine/vehicle number: CATDE150PN7F00113, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 1.902 kg Functional Generator capacity: 150 kVA Dimensions of cargo space: 334 x 117 x 175 cm CE mark: yes Other information Fuel consumption: 24.8 Liter per Hour at 75% Load Generator: Caterpillar A2625L41 Frequency: 50 Pjdjx Nutkopfx Akiorc Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 325 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Caterpillar DE150GC Generator Set specifically designed for stand-by duty.

Year of construction: 1994, condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: GME, transformer from press brake HACO PPES 30135 -Type: STMU -Technical data: see photo nameplate -Dimensions: 150/100/H235 mm Predporgbvrofx Akiec -Weight: 9.6 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 Prjdpfxskzpm Hj Akijc -Type: DT -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Year of construction: 1990, condition: used, ENGEL - ES 700/150 150 ton, 392 cm³, Strok: 420 mm Psdpfx Aozxrd Aekijrc

Condition: used, Year of construction: 2012, Hasegawa PM 150 CNC machining center TECHNICAL DATA Spindle Spindle nose: HSK-E32 Speed: 100 - 30`000 rpm Spindle motor: 3.0 / 4.5 kW Tool changer Capacity: 10 Tool - tool change time: 1.8 sec Travel distances X-axis: 150 mm Y-axis: 225 mm Z-axis: 200 mm 4th axis: Lehmann EA-507, 360° Psdpfsu E El Isx Akierc OFFER SCOPE U.A: (non-exhaustive list): Hasegawa PM 150 CNC machining center 10-position tool changer Lehmann EA-507 rotary axis transformer Fire extinguishing system Complete operating documentation Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information provided

Condition: used, This listing is for an OHaus Harvard Trip 1400/1500 Scales 2-5ib Capacity Mechanical Balance The unit is in full working condition and is ready for immediate release The Harvard Trip series is a precision, mechanical two‑pan (comparative) balance. Prsdpexv Afljfx Akisc Its principal use is for comparative weighing (i.e. comparing masses, not simply reading off an absolute weight) — you place an unknown object on one pan and “poise” weights / sliding masses on the other pan until balance is achieved. Because it is mechanical, it requires no external power supply (no battery or electronics). The Harvard Trip balances are known for durability, low maintenance, and long service life.

Condition: new, machine/vehicle number: FGWPEP75HDM802004, fuel type: diesel, motor manufacturer: Perkins 1106A-70TG1, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 1.341 kg Functional Generator capacity: 150 kVA Dimensions of cargo space: 245 x 101 x 154 cm CE mark: yes Other information Fuel consumption: 22,6 L/Hour at 75% Load Prime Generator: FG Wilson FGL30080 Frequency: 50 Voltage: 400 Prodpfx Aozyldfjkiec Drill equipment: Tank, Battery, Control Panel Water tank volume: 327 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames