Used Tissue-Tek Tec 4715 Embedding Centre With Cryo Console Coldplate for sale (11,152)

Condition: new, Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Bedsgl Nlmspfx Akasdb Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. Bdjdpjdwktkefx Akaob + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Bdsdpjchuvrofx Akaeb Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Bsdpfxsv Rpxle Akaodb Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: new, Year of construction: 2026, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) Bedpfsffh Atjx Akaedb CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: good (used), Clean air extraction Used machine, good condition Pictures to follow Bedpfx Akjrb D Neaedb Mobile Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h / 400 V

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) Bsdpfx Aegmfa Aokasdb - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. Bodpfx Asl Dw U Djkasdb The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Bsdoib Dadepfx Akaodb Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Typ: SESOTEC Genius+ Tunnel size: 800x400mm Product dimensions 750x350 (wxh in mm) Conveyor belt length: 1.500mm Conveyor belt width: 750mm Conveyor belt height: 800+/-100mm Basic sensitivity: FE: 1,8mm; NFE: 2,5mm; SUS: 3,0mm Year of manufacture: 2025 Bdedpfov Dup Nox Akaob Conveyor belt: modular belt Conveyor speed: variable Drive: gear motor Supply voltage: 230V / 50Hz Reject: alarm and stop Operating direction: in running direction left Accessoires: 1 set test pieces

Condition: used, axle configuration: 2 axles, first registration: 02/2010, loading space length: 10,450 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, total length: 11,200 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 6,760 mm, color: other, Year of construction: 2010, Equipment: ABS, tail-lift, = Further Options and Accessories = - EBS - Tail lift = Remarks = Number of axles: 2, Payload: 23,200 kg, Own weight: 9,800 kg, Gross weight: 33,000 kg, Type of chassis: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, ABS, EBS, Body year: 2010, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Vector 1850, Refrigeration unit: Diesel/Electric, Unit operating hours / electric: 137, Unit operating hours / diesel: 7979, Wall thickness: 45 mm, Type of refrigeration: Cooling, Axle type: MERCEDES-BENZ, Tail lift, Tail lift type: rear flap, Tail lift capacity: 3000 kg, Tail lift manufacturer: Ama, Tail lift material: Steel, Tail lift dimensions: 210x255 = Further Information = General information Cab: Day cab Registration number: OK-55-YX Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread left: 3 mm; Tire tread right: 3 mm Axle 2: Tire tread left: 4 mm; Tire tread right: 6 mm Weights Unladen weight: 9,800 kg Load capacity: 23,200 kg Gross vehicle weight: 33,000 kg Functional Tail lift: Ama, rear flap, 3,000 kg Refrigeration unit: Diesel and electric (7,979 operating hours diesel; 137 electric) Wall thickness: 45 mm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none Bsdpsyvffcsfx Akasdb = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good prices • Proper business practice • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration handled quickly • Expert technical services • The assurance of “recognizable quality” • And more… Please visit our website for special offers and complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask us directly about our European warranty package.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, total length: 2,150 mm, year of last overhaul: 2025, total width: 550 mm, total height: 700 mm, DGUV certified until: 05/2027, conveyor belt width: 350 mm, input frequency: 50 Hz, Equipment: chassis, bm TEC Dough Conveyor Belt, Long Version Belt width: 350 mm Bdedpey Ik Arofx Akaob Belt speed continuously adjustable Stainless steel design DGUV V3 tested exclusively by us Dimensions approx.: 2150 x 550 x 700 mm (W x D x H) Connection: 230 V Used machine, cleaned & SAB inspected Visit our large exhibition!

Condition: like new (used), functionality: fully functional, input voltage: 230 V, total length: 1,200 mm, year of last overhaul: 2025, total width: 500 mm, total height: 1,050 mm, DGUV certified until: 06/2027, conveyor belt width: 300 mm, input frequency: 50 Hz, Equipment: chassis, bm TEC dough conveyor belt, foldable Belt width: 300 mm Belt speed: infinitely adjustable Stainless steel design Exclusive to us: DGUV V3 tested Approx. dimensions: 1200 x 500 x 1050 mm (W x D x H) Connection: 230 V Bdjdpfxjy Ik Alj Akaob Used machine, cleaned & SAB tested We have many more bakery machines in stock!

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, total length: 700 mm, year of last overhaul: 2025, total width: 550 mm, total height: 800 mm, DGUV certified until: 05/2027, conveyor belt width: 350 mm, input frequency: 50 Hz, Equipment: chassis, bm TEC Dough Conveyor Belt, short version Belt width: 350 mm Belt speed infinitely adjustable Stainless steel construction DGUV V3 tested exclusively by us Dimensions approx.: 700 x 550 x 800 mm (W x D x H) Connection: 230 V Used machine, cleaned & SAB tested Bjdjy Ik Afepfx Akasdb We have more bakery machines in stock!

Condition: like new (used), Miwe condo 80x60 stonefloor oven with steam function in good working condition if you have further questions please sent an request Bsdsumm Nvjpfx Akasdb

Condition: like new (used), Year of construction: 2023, operating hours: 2,983 h, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller model: RMS6, spindle speed (max.): 24,000 rpm, spindle nose: HSK63A, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Röders RXP601 DSH incl. Automation RCE2 X-axis: 540 mm Y-axis: 635 mm Z-axis: 400 mm Clearance table/spindle: 485 mm Spindle: HSK63A, 24,000 rpm MHT medium distributor incl. holders and nozzle bodies included Compressed air through spindle Machine table: Erowa UPC 320x320 Tool changer: 64 positions Preparation for emulsion cooling and high-pressure coolant (IKZ) Options package: - Thermo package for maximum precision - Spindle compensation - Blum measuring laser for tool measurement - Handbox with display - Workpiece cleaning with compressed air - Tool cleaning with spray medium - Automatic machine calibration for maximum precision even with fluctuating temperatures - UPS for machine control - Remote maintenance - 3D measuring probe, automatically thermostable cone - Oil mist extraction with mechanical filter - Emulsion machining, preparation for high-pressure 40 bar pressure stages - Medium distributor: 1 medium/3 delivery rates - Medium distributor operation with MV2 Bdodpey Ez Utofx Akaeb - Front machine door as automatic lift door - Chuck control, dual pneumatic - Job manager RMSMain - Stainless steel internal cover - 3D machine model Automation RCE2: 10-position pallet changer for Erowa UPC pallets with max. dimensions 340x340 mm Maximum load per pallet: 300 kg

Condition: used, axle configuration: 2 axles, first registration: 02/2011, loading space length: 10,500 mm, loading space width: 2,490 mm, loading space height: 2,670 mm, total length: 11,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 6,720 mm, color: other, Year of construction: 2011, Equipment: ABS, tail-lift, = Further Options and Equipment = - EBS (Electronic Braking System) - Tail lift - Central lubrication = Remarks = Number of axles: 2, Payload: 24,680 kg, Own weight: 8,320 kg, Gross weight: 33,000 kg, Kingpin size: 2 inch, Central lubrication, Suspension type: full air suspension, ABS, EBS, Body year: 2011, Axle type: BPW, Tail lift = Further Information = General Information Cab: Day cab Registration number: OL-06-GS Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; left tyre tread: 6 mm; right tyre tread: 4 mm Axle 2: Lift axle; left tyre tread: 6 mm; right tyre tread: 4 mm Weights Unladen weight: 8,320 kg Payload: 24,680 kg Gross vehicle weight: 33,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent traders of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer covers all European brands, model years, and price classes. Bsdpow Da A Tofx Akaodb Why buy at Kleyn Trucks? Easy! • Large, fast-changing stock • Recognisable quality • Competitive prices • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The assurance of 'recognisable quality' • And much more.... Please visit our website for special offers and our full stock. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request through our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 2 axles, first registration: 10/2010, loading space length: 10,300 mm, loading space width: 2,500 mm, loading space height: 2,590 mm, total length: 11,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 6,720 mm, color: other, Year of construction: 2010, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 2, Payload: 24,180 kg, Unladen weight: 8,820 kg, Gross weight: 33,000 kg, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2010, Side wall material: insulated, Refrigeration unit manufacturer: Thermoking, Model: SLX Whisper, Cooling unit: Diesel/electric, Electrical unit hours: 1, Diesel unit hours: 3,893, Wall thickness: 45 mm, Type of cooling: Chilling and freezing, Axle type: BPW, Tail lift, Tail lift design: rear liftgate, Tail lift capacity: 3,000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: steel, Tail lift size: 250x200, Battery for access ramp = Further Information = General Information Cab: Day cab Registration number: OL-66-DV Drivetrain Fuel type: Diesel Transmission Transmission: Manual Axle configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lifting axle; Tyre tread left: 4 mm; Tyre tread right: 4 mm Axle 2: Tyre tread left: 6 mm; Tyre tread right: 6 mm Weights Unladen weight: 8,820 kg Payload: 24,180 kg Gross Vehicle Weight: 33,000 kg Functional Tail lift: Dhollandia, rear liftgate, 3,000 kg Refrigeration unit: Diesel and electric (3,893 hours diesel; 1 hour electric) Wall thickness: 45 mm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, model years, and price ranges. Bdsdpfx Aow Da Ayokaeb Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of "recognizable quality" • And much more... Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 2 axles, first registration: 10/2010, suspension: air, tire size: 385/55R22,5, wheelbase: 11,280 mm, color: other, Year of construction: 2010, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 2, Payload: 30,320 kg, Unladen weight: 11,680 kg, Gross weight: 42,000 kg, Suspension type: Full air, ABS, EBS, Year of body construction: 2010, Axle type: BPW = Further Information = General Information Bjdpfjw Da A Hsx Akaodb Cab: Day Registration number: OL-69-DV Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 4 mm; Tyre tread right: 5 mm Axle 2: Steered; Tyre tread left: 4 mm; Tyre tread right: 4 mm Weights Unladen weight: 11,680 kg Payload: 30,320 kg Gross vehicle weight (GVW): 42,000 kg Environment Emission class: Euro 0 Condition Overall condition: Fair Technical condition: Fair Optical condition: Fair Damage: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European makes, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Reliable, recognizable quality • Competitive prices • Trustworthy business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged promptly • Expert technical services • The security of ‘recognizable quality’ • And more.... Please visit our website for special offers and a complete stock list. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send us an inquiry via our website. Ask directly about our European warranty package.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, spindle speed (max.): 30,000 rpm, spindle nose: HSK63, Equipment: chip conveyor, rotational speed infinitely variable, Röders RXU1000DSH X-axis: 700 mm Y-axis: 855 mm Z-axis: 500 mm The clearance height between spindle nose and machine table is 600 mm Spindle: HSK63F, max. 30,000 rpm Tool magazine: 24 slots – optionally expandable Equipment: - Automatic machine calibration for highest accuracy - Spindle compensation Bedpfjy E Aa Djx Akajdb - Compressed air through spindle - Remote maintenance - Emulsion cooling with IKZ 40 bar - Emulsion mist extraction - Work area rinsing - Automatic 3D probe - Blum tool measurement laser - Workpiece cleaning with compressed air The machine is completely overhauled, measured, and inspected in our facility. It fulfils the original manufacturer's specifications regarding geometry!

Condition: good (used), axle configuration: 3 axles, first registration: 02/2014, total width: 2,470 mm, color: blue, Year of construction: 2014, Make axles: SAF Empty weight: 4.767 kg Carrying capacity: 38.233 kg GVW: 43.000 kg APK (MOT): tested until 04/2027 Technical condition: good Visual appearance: good Bdodpfx Ajy Er Anokaeb Registration number: ON-29-FK Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Extandable - Lift axle - Twist-locks

Condition: excellent (used), Used cryothermal liquid nitrogen tank with a capacity of 47 liters and all 11 specimen canisters. This liquid nitrogen tank is ideal for deep-freeze storage of biological samples and chemicals. Delivery within the EU is possible. Bjdpfx Akjy H Hiljaodb

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Bodpfxsvt Dwbs Akaedb Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2026, total width: 2,470 mm, total height: 1,350 mm, suspension: air, tire size: 385/65R22.5, color: black, Year of construction: 2026, Axle configuration Tyre size: 385/65R22.5 Make axles: VALX Rear axle 1: Max. axle load: 9000 kg Bsdpfx Aoy Ec A Eskaodb Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 4.855 kg Carrying capacity: 39.145 kg GVW: 44.000 kg Maintenance APK (MOT): tested until 04/2027 Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Registration number: OX-80-FD Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Extandable - Lift axle - Twist-locks

Condition: used, Year of construction: 2000, functionality: fully functional, Röders RFM 600 high-speed milling machine Bodpfxjy Efp Uj Akaodb Manufacturer: Röders Type: RFM 600 Year of manufacture: 2000 Condition: used, under power, control on Windows 7 NEW x-path 600 mm y-path 500 mm z-path 300 mm Control RÖDERS RMS 6 3.60 Spindle holder HSK E 40 Spindle speeds 42,000 rpm 18-position tool changer Table size 700×500 mm Workpiece weight 800 kg Drive 14 kW Total power requirement kW Machine weight approx. 5.2 t Space requirement approx. 3.2×2.25×2.65 m Röders Jobmanager (for processing several workpieces in succession) Probing programs for almost all common geometries Extor extraction system for dusty machining Minimum lubrication Bed path blower Blum measuring laser (for tool measurement length + diameter + contour and breakage control) Tool cleaning (air) Cooling unit for spindle and switch cabinets documentation