Used Tilgert Pinch Roll Unit/Felt Brake/Crop Shear for sale (51,035)

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. Iiedpfoh U Rzgjx Aatsf LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Year of construction: 2014, condition: good (used), machine/vehicle number: ONK25SR/4/1, Vegetable sorter / grader with sorting range from 1cm to 10cm and above Iisdowzwi Sjpfx Aatjf

Year of construction: 2009, condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS with rotating unit -Drive motor: 0.18 kW 76 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Rotating unit: 1040 x 1040 mm / see photos -Number: 1x roller conveyor available Ijdpfotlzd Rjx Aatjif -Dimensions: 1700/1680/H700 mm -Weight: 301 kg

Year of construction: 2009, condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS with rotating unit -Drive motor: 0.37 kW 76 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm Iijdpfx Aastlzfvstsf -Rollers: rubberized -Delivery height: adjustable -Rotating unit: 1040 x 1040 mm / see photos -Number: 1x roller conveyor available -Dimensions: 1650/1400/H960 mm -Weight: 290 kg

Year of construction: 2009, condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS with lifting unit -Drive motor: 0.37 kW 71 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm Iisdpjtlzfysfx Aatsf -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Lifting unit: 1270 x 600 mm / see photos -Number: 1x roller conveyor available -Dimensions: 1700/1500/H680 mm -Weight: 332 kg

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. Isdpjyw Rzajfx Aateif The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -driven roller conveyor with driven slewing ring -Roll width: 720 mm -Roller conveyor length: 1500 mm -Roll diameter: 90 mm -driven: via sprockets -Geared motor: 0.55 kW -Speed: 18.9 m/min -Slewing ring driven: 0.18 kW 31.5 rpm -Dimensions: 1510/900/H695 mm Iijdec N N Hqjpfx Aatsf -Weight: 314 kg

Condition: used, Sheet Metal Working Machine Set Available November 2026 • Hydraulic Press Brake – OMAG Brand: OMAG Bending length: 4,000 mm Ideal for sheet metal bending • Hydraulic Guillotine Shear – OMAG Brand: OMAG Cutting length: 4,000 mm Ideal for cutting sheet metal Iijdpfxsznkl Re Aatsf

Year of construction: 1981, condition: used, machine/vehicle number: 152, We offer the Datamail Roll Collator BIELOMATIK JUMBO DATAMAIL COLLATOR P668 for sale. Configuration: Year: 1981 Jumbo paper unwinds, Ø 127 cm (50") Carbon unwinds, Ø 70 cm Cross glue unit NOT AVAILABLE! Programmable length gluing unit NOT AVAILABLE! Die-cutting cylinders in various sizes and cams for numbering machines. Snap out delivery with batcher and forward numbering capability (Bielomatik VWZ) – not visible in the photos. Includes some spare parts. Machine is operational. Video available upon request. Price including disassembly: 9,000 EUR. Iodjum T Ncepfx Aatsif

Condition: new, Year of construction: 2026, power: 10 kW (13.60 HP), pressing force: 100 t, overall weight: 9,000 kg, 2 in 1 = Press Brake + Shear bending length 3040 mm, Press capacity 100 to, Shear capacity L = 3200 mm x 6 mm, throat 200 mm, working high 640 / 1240 mm, Control CYBELE CybTouch 15, mot. gauge 700 mm, shadow cutting line, motor 10 KW Ijdpfxjd Hn Taj Aatjif dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine available L = 2000 mm und L = 1400 mm

Year of construction: 2000, condition: used, Empty weight: 20.200 kg Dimensions (LxBxH): 550 x 290 x 310 cm Serial number: k 3833 Max. Pressing Force: 2250 kN Max. Working Length: 4500 mm Max. Working Pressure: 300 bar Max. Stroke: 235 mm Control system: Advantech Net weight: 20,200 kg Dimensions LxWxH: 5,500 x 2,900 x 3,100 mm Online auction of metalworking and sheet metal processing machines (including a wide selection of SIEGMUND welding and clamping tables and related tools, SAFAN press brakes and SAFAN guillotine shears, MOSMAN YLS-3000 3kW laser welding machine, various FRONIUS, REHM, etc. welding machines, BOMAR, URSUS, ELHA, etc.), remaining stock of sheet metal, materials and inventory, rolling stock, technical equipment, and modern office furniture, released following the recent bankruptcy of Solex Thermal Science (Netherlands) B.V., formerly Mosman Stainless Steel in Haaksbergen, the Netherlands. The online auction opens Thursday 16 July and closes Thursday 3 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 1 September Iiodpfx Ajzu Nfpsatsf Pickup days are on: - Thursday 10 September - Friday 11 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), functionality: fully functional, Selling an original Homag Group glue application unit (upper part with glue application roller and drive coupling) for edge banding machines of the Brandt / Homag brand. The unit is in good, clean condition with normal signs of wear and tear (see article photos). It features the practical quick-change system, including the corresponding locking pins (ball handles) and the original Harting connector. Technical data & details: Manufacturer: Homag Group / Brandt Part number (engraved): 4-030-15-0531 (4030150531) Iodpoy Uv Umsfx Aatjif Components: Knurled glue roller, metering slide for layer thickness adjustment, protective grille, high-temperature-resistant connecting cable with Harting connector, 2x locking pins. Suitable for: Many models of the Brandt Optimat series (KDN / KDF / Ambition, etc. – please check the part number with your machine beforehand).

Condition: excellent (used), The geared motors are fully functional, tested, and ready for use. Their technical condition is very good, with only normal signs of wear and tear resulting from operation. Condition of individual units: 1 unit has a small dent in the fan cover (visible in the photos). 1 unit has a minor seal damage (crankshaft seal) – visible in the photo. The price applies to 1 unit. Technical data: Manufacturer: SEW-EURODRIVE Motor type: DT80K4/BH6/HR/TF Power: 0.55 kW Iedpfx Asznnxuoatsif Motor speed: 1360 rpm Output speed: 54 rpm Three-phase motor Electromagnetic brake Protection class: IP54 Insulation class: F Country of manufacture: Austria The scope of sale includes exactly what is shown in the photos. The geared motors are ideally suited for driving conveyors, feeders, production machines, packaging machines, and other industrial equipment. The price stated in the advertisement applies to one unit.

Year of construction: 2025, condition: used, functionality: unexamined, Complete Automatic Roll Forming Line (fully compatible with all Unistrut products) Year of manufacture: 2025 Model: CIRF-2019-2486 Unistrut 41 x 41 and 41 x 21 profile Approximately 15 meters per minute Iiodpfxozc Hkgo Aatsf UK / Irish wiring standard (UK wiring schematics, safety pull cord system around main beds) with 2-ton de-coiler 3-stage, 3-ram punching unit (Hole Size: Approx 12mm × 25mm / Hole Spacing: Approx 50mm centers) Fully automatic upstroke shear Auto Hydraulic Logo printer/stamper Discharge table Overall Length: Approximately 30 meters

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: semi-automatic, controller manufacturer: GEKA, stroke rate (min.): 37 1/min, stroke adjustment: 60 mm, throat depth: 500 mm, punching force: 55 t, punching diameter: 100 mm, cutting range flat at 45° (X-axis): 300 mm, working height: 1,085 mm, oil tank capacity: 80 l, overall weight: 1,750 kg, total length: 2,100 mm, total width: 1,160 mm, total height: 2,090 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, notching unit, GEKA HYDRACROP 55 SD – Universal Ironworker | 360° | Ø100 mm Bending Station For sale: professional dual-cylinder universal ironworker from the renowned Spanish manufacturer GEKA, model Hydracrop 55 SD. The machine is in excellent technical condition, ready for immediate operation in demanding industrial environments. WHAT SETS THIS UNIT APART? Full 360° Mobility: The machine is mounted on a special rotary bearing, enabling complete 360-degree rotation. This feature is invaluable for processing long flat bars or profiles in smaller workshops. SD Version (Extended): The throat depth is an impressive 500 mm, allowing work with very wide sheet metal panels. Extreme Punching: The machine is equipped with an attachment for punching holes up to Ø100 mm. Additional Bending Station: Includes a professional flat bar bending station, making this machine a versatile metalworking center. TECHNICAL DATA: - Punching force: 55 tons (550 kN) - Number of cylinders: 2 (enabling operation by two users at different stations simultaneously) - Number of workstations: 5 (punching, angle shearing, flat bar shearing, round/square bar shearing, notching) Iijdpfsyricdjx Aatjf - Max. sheet thickness: 20 mm - Angle cutting at 90°: 120 x 120 x 10 mm - Motor power: 5 kW - Stroke rate: 37/min - Weight: approx. 1,750 kg EQUIPMENT & BENEFITS: - Control system: Intuitive foot pedal control with “Touch & Cut” function (electric back gauge) - Safety: Emergency stop, full CE marking, and complete technical documentation (DTR) - Condition: Well-maintained machine, regularly serviced, with all measurements and operating parameters perfect.

Condition: good (used), Offer 22188 Technical specifications: - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm - Min. roller conveyor height approx. 640 mm - Max. roller conveyor height approx. 1190 mm - Outer roller width approx. 260 mm - Roller diameter approx. up to max. 100 mm - Max. possible number of rollers: 13 - 10 rollers are installed - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm Ijdpowcphcofx Aatjif - Weight approx. 250 kg

Condition: used, Year of construction: 2001, Dematic roller curve right 90°-600-540 IR795 RA1653 Make: Dematic Running direction: 90° right running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 797 mm length: 1790mm Overall height frame: 132 mm Height including motor: 275 mm Motor MOVI-Mot 3x300-500V 0,37kW 1400 u/min max Brake 220-240V Gear motor: SEW WF20 DT71D4/BMG/Z/MM03 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Isdpfxok Abf Aj Aatoif Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total width: 500 mm, total height: 750 mm, load capacity: 80 kg, roll diameter: 50 mm, roll width: 410 mm, Easysystem Checkweigher roller conveyor with weighing unit Easysystem scale roller conveyor for sale in new condition year of manufacture: 2022 weight measurement 0-25kg /0-80/kg load cell: 4x Dini Argeo FCX C3 20KG TR display: Dini Argeo DGT1S multifunctional, digital weight transmitter/display interface: Dini Argeo Profinet 1s RS485-ProfiNET interface, for DIN-rail mounting. With UL marked PCB, terminal blocks Iiodovbdlzopfx Aatsf roller conveyor length: 990mm roller width 400mm track total width: 520mm height: 730mm bearing-mounted galvanized steel rollers with belt drive

Condition: good (used), functionality: fully functional, 4-roller feed unit STEFF 2048 automatic arm Specification: • Condition – used, after inspection • Manufacturer – STEFF • Model – 2048 • 4 new feed rollers, size 120x60 • Forward/reverse rotation • Speed control by switch and gears • Motor powered by 380V (3-phase) electricity • 8 working speeds ranging from 2.0 to 33.0 m/min • Automated height and feed position adjustment (electric motors) • Weight approx. 70 kg Additional information: Isdpfxjxxbh Ro Aatjif • Good technical condition • The attached photos show the actual state of the item for sale • Possibility to turn on and test the device on site

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY Iiedpfx Aajy Aubuetof CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: used, Technical specifications: Iodpfjzikpfox Aatjif Number of rollers: 3 Number of speeds: 4 Motor power: 0.75 kW Feed speeds: 3-23 m/min Roller size: 120x50 mm Power supply: 380 V

Condition: used, Year of construction: 2000, functionality: fully functional, We are selling 2 Ruchser profile offcut transport trolleys. 12 compartments, each 90mm wide – these are infinitely adjustable. Width 850mm, length 1900mm. Transport trolley height 1800mm. Iedsy Dfq Aopfx Aatjif

Condition: used, Year of construction: 2006, Transnorm roller conveyor 2229-660-600 RA2425 Iiedpfx Aaew Nq S Ustof Make: Transnorm Roller width (RB): 600 mm Nominal/outer width (NB): 660 mm Length: 2229 mm Roller diameter: 30 mm Roller distance: 76 mm Motor Roller conveyors: no motor but with 2x pneumatic brake Brake area length: 500 mm Height frame: 90 mm Height with brakes: 200 mm Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm Ijdpfx Asu Ic Ewoatoif - tiltable: positiv 30°; negativ 15° *

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 6.088.177.254, controller model: Durma DT-7, working width: 3,100 mm, sheet thickness (max.): 13 mm, overall weight: 11,800 kg, TECHNICAL DETAILS Max. sheet thickness: 13 mm Max. working width: 3,100 mm Overhang: 50 mm Design: Swing-beam Angle adjustment: Manual Shear gap adjustment: Motorized Back gauge type: Electric Back gauge depth: 1,000 mm MACHINE DETAILS GENERAL Control system: CNC Controller: Durma DT-7 Isdpozuwvvofx Aatsif Drive type: Hydraulic Power: 30 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,350 x 2,350 mm Weight: 11,800 kg Transport packages: 1 unit EQUIPMENT CE marking Finger guard: Fixed with fold-up guard Table type: Ball-bearing table