Used Terra Star Shovel Separator for sale (8,418)

Year of construction: 2025, condition: used, Fine screening 0-15/20 mm. The separator is ideally suited for fine screening of topsoil and humus, especially when larger stones are not desired in the screened material. Mixing in compost, sand, or substrate in a single pass while screening with a Terra-Star also works excellently. This way, dirt is turned into profit! Disk spacing: 10 mm. Screened grain size: 0-15/20 mm. The separator is currently on rental. Upon return, it will be checked by us. 12-month warranty. Nodpfx Abeyfwfgoyodc Price without adapter. Suitable for excavators from 6t. Suitable for wheel loaders from 4t. Output: 18–23 m³/h. Leak oil connection required: 2 Series: TSE.103.565

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, the machine delivers an enormous throughput with its 4 shafts! Mixing in lime or binding agents to dry soil, blending with compost, sand, other soils, etc., while simultaneously crushing soil clumps. Njdpfx Absyf Au Hoyedc Aerating, shredding, tearing, turning biomass, organic waste, and compost, while simultaneously separating branches, roots, etc. that cannot be crushed. Crushing easily breakable stones in construction debris such as pumice, bricks, Poroton blocks, while simultaneously separating the chunks. Larger and harder parts remain in the separator. Feeding lumpy soil to a screening plant reduces waste and increases throughput. Price without adapter! For excavators from 24 t For wheel loaders from 13 t Weight in kg: 2300 Throughput: 64 - 95 m³/h Leak oil connection required: 1 Series: TSP.154.128

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, this machine delivers enormous throughput thanks to its 4 shafts! Mixing in lime or mixed binders for soil drying, blending with compost, sand, other soil types, etc., with simultaneous crushing of soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost, while simultaneously separating out branches, roots, etc., that cannot be shredded. Crushing brittle rocks in construction debris such as pumice, bricks, Poroton, while simultaneously separating the fragments by size; larger and harder pieces remain in the separator. Feeding clumped soil into a screening plant reduces waste and increases throughput. Price without adapter! Suitable for excavators from 24 t For wheel loaders from 13 t Ndsdpoyf Avdefx Abysc Weight (kg): 2300 Throughput: 64 - 95 m³/h Leakage oil connection required: 1 Series: TSP.154.132

Condition: used, Year of construction: 2015, operating hours: 16,432 h, functionality: fully functional, 𝗦𝘁𝗮𝗿 𝗦𝗥20 𝗝 𝘁𝘆𝗽𝗲 𝗖 Year 2015 Production hours : 16432 h Ndodpfxszmw Dks Abyec Oil tank Iemca bar loader Fanuc command 31i Model B Parts belt conveyor Fanuc command 31i Model B

Condition: used, Tumbler Inject Star Magnum 2600 COOL with Lifter Nsdpfxszu Dcvs Abysdc

Condition: excellent (used), Year of construction: 2016, operating hours: 21,038 h, functionality: fully functional, spindle motor power: 7,500 W, spindle speed (max.): 7,000 rpm, overall weight: 5,000 kg, type of input current: three-phase, number of spindles: 2, Equipment: bar feeder, documentation/manual, CNC LONGITUDINAL TURNING CENTER STAR SV-38 R Type B + Automatic bar feeder FMB 3-36 3200mm, used machine, year of manufacture 2016 STANDARD MACHINE EQUIPMENT - Main/counter-spindle with C-axis and clamping system - Synchronizing guide bushing Neukomm 464.001 (1A3-01) - System for hybrid retooling of the bar feeder - Collet chuck housing F48/81 (1A3-51) - Interceptor collet chuck housing F48/81 (1A3-71) - 5-position tool holder, 4 for 16x16 shanks and 1 for 20x20 - 4-position unit for cross milling (main side) - 10-position turret head with 5 stations and B-axis (without tool holders) - Unit with 8 tool positions for interceptor (without tool holders) - Spindle cooling - Oil chiller - Parts conveyor - Parts blow-off - Parts ejector with spring (1A4-81 F48/81) and bushing (1A4-81A) - Part ejector sensor (1A4-09) - Piping for pressure cooling (7 bar) - Pneumatic system, hydraulic system - Broken cutting tool sensor - Coolant tank with flow and level sensor (1A4-59) - Automatic lubrication device with control Neds Afc Dqjpfx Abyjdc - Leveling pads, toolbox - Interface for bar feeder, chip conveyor, and high-pressure pump - RS232C / USB / RJ45 interface

Year of construction: 2024, condition: good (used), Application with screening shafts: Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil. Also effective with moist soil. The mixing of compost, sand, substrate, etc. in one operation during screening is easily possible. Screening of topsoil, construction debris, and gravel. Refilling of structures and trench backfilling, etc. Shafts for other grain sizes or applications can also be installed, please inquire for details. The mounted adapter can be purchased or modified, not included in the price. For excavators from 4 t For wheel loaders from 3.5 t Weight in kg: 400 Throughput: 10.5 - 15 m³ / hour Leak oil connection required: no Njdpew N Rxhofx Abysdc

Year of construction: 2025, condition: new, Terra-Star Powerline TSP.184, cutting width 1800 mm, this machine delivers exceptional throughput thanks to its 4 shafts! Equipped with M80X mixing shafts, armored in wear zones—providing a grain size of 0–60/80 mm. Suitable for mixing lime and blended binders, breaking up clumped material, and separating stones, branches, roots, etc. Price without adapter For excavators from 32 t For wheel loaders from 17 t Weight in kg: 3100 Throughput: 78 – 120 m³/h. Leak oil connection required: 1 Nsdpjyf Avkjfx Abyedc Series: TSP.184.023

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, 5 units Star Refrigeration water-cooled chillers with 5 cooling towers Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller. Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134a Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES Nsdpfx Abozz Rfqeyjdc CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a. Evaporator Stanref International shell-and-tube, model FEV3021/715, built October 2015, dry weight 2,200 kg. Shell: R134a, 570 litres, design 17.2 bar. Tubes: chilled water, 430 litres, design 10 bar. Connections labelled CHILLED WATER. Electrics SMES cabinet with controller, start/stop and emergency stop. Electronic Devices Ltd gas detector ED 811 (ATEX). Schneider Electric isolator 415 V, 250 A, type SQB7200L. Siemens motor 400/690 V, 50 Hz, IP55. Cooling towers 5 towers in stock. Offered with the five chillers as a complete heat-rejection set, or as a separate lot. Used industrial plant. Sale: one chiller, all five, towers only, or 5 chillers + 6 towers. The five chillers come from one contract, so voltage, refrigerant, charge and layout match across the lot. Take a single machine for spare duty or take all five for a plant room. The six towers close the water-cooled circuit if you need heat rejection on the new site.

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.124, cutting width 1200 mm, this machine achieves an enormous throughput with its 4 shafts! Equipped with BS252 mixing shafts, armored in wear zones – produces a granulation of 0-35/40 mm, ideal for mixing and shredding while aerating the material, suitable for compost and liquid soil. High throughput even with wet soil. Fitted with an excavator adapter CW30/40. Price without adapter. Nsdpfx Abeyf Aqzjyedc For excavators from 18 t For wheel loaders from 10 t Weight in kg: 1850 Throughput: 52 – 77 m³/h Drain line required: 1 Series: TSP.124.105

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500mm; this machine delivers enormous throughput with its 4 shafts! Fitted with screening shafts featuring star discs, armored in the wear zones—achieves a particle size of 0-20/25 mm. Ideal for screening and backfilling pipe and trench excavations where high throughput is required, especially in wet and cohesive soils. Equipped with excavator adapter OQ70/55 Price without adapter! Ndsdpoyf Aq Uefx Abyoc For excavators from 24 t For wheel loaders from 13 t Weight in kg: 2300 Throughput: 64 - 95 m³/h Leak oil connection required: 1 Series: TSP.154.121

Year of construction: 2024, condition: used, Applications and use: The separator is best suited when a light excavator needs to handle heavy, stubborn materials. It is derived from the wider TSC.154 and features the same drive and bearing assembly, resulting in increased power output on a smaller screening surface. The built-in star discs are 5 mm thicker than the standard discs and are additionally fitted with welded-on wear protection. The disc separation gap is 20 mm, resulting in a screened particle size of 0-25/30 mm, ideal for producing backfill material. Price does not include the mounting plate. Adapters for excavators can also be custom fabricated and supplied upon request. Price on request. For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Nedpfx Aew Rkxqobyodc Throughput: 30 - 45 m³/hr Leak oil connection required: no

Year of construction: 2022, condition: used, Application with screening shafts: Separation of stones, branches, roots, turf, debris, etc. from reusable waste soil. Effective even with moist soil. Mixing in compost, sand, substrate, etc. is possible in a single pass during screening. Suitable for screening topsoil, construction waste, gravel. Ideal for backfilling structures and trench refilling, etc. Can also be adapted for other mesh sizes or shaft tasks upon request—please ask us for details. The separator comes from a buyback due to business closure. The separator has been inspected in our workshop and includes a 12-month warranty. Currently, an OQ45-5 is installed, which is not included in the price. Price: €1,750 Nodpfx Aboyfwdveysdc For excavators from 6 t For wheel loaders from 4 t Weight in kg: 600 Throughput: 23 m³/h Leak oil connection required: 2 Series: TSE.103.283

Year of construction: 2021, condition: used, The separator was used in the production of flowable fill (liquid soil). Primarily, peat was shredded, which is why cross-discs are installed to ensure effective material size reduction. The PE lining ensures improved material flow. The shafts are suitable for shredding biomass and compost, as well as other soft materials such as bark, etc. The separator is equipped with an adapter compatible with wheel loader systems from Volvo, Cat, and Liebherr, as well as an overflow protection system that prevents debris from spilling over. We can also equip the separator with different shafts, such as screening shafts or mixing shafts. Please refer to the attached description. Suitable for excavators from 16 t Suitable for wheel loaders from 12 t Njdpfx Abeyf Ar Esyjdc Weight (kg): 1600 Drain line required: 2 Series: TSC.184.007

Year of construction: 2018, condition: used, The separator is from a well-known customer who has vacated the storage area where it was previously in use. Ndjdpfeyf A Erex Abysc With the installed screening discs, you achieve a grain size of 0-45/50 mm. Mixing in of additives is also possible in the same operation. The separator breaks up clods of soil and separates stones, roots, and branches from the reusable soil. When used as a feeder for a screening plant, performance increases by approximately 30% and waste/screen overflow is reduced by 60%, as the clods are already broken up. Other shafts can also be installed in the separator at any time. Conversion time: 40-60 min (patented shaft coupling) New prices: Mixing shafts M80X, grain size 0-60/80 mm: €10,567 Mixing shafts with block disc BS252, grain size 0-45/60 mm: €14,066 Used units, if available, correspondingly cheaper. An overflow plate is installed to prevent soil from spilling onto the wheel loader and to increase capacity by about 1/3. Included in the price is also the adapter for Volvo L50-120 type wheel loaders. Further technical information can be found in the datasheet in the images or on our website. For wheel loaders from 15 t Weight (kg): 3450 Drain line required: 1 Series: TSP.263.001

Year of construction: 2008, condition: excellent (used), Downward conveyor / separation / cycle conveyor. Nodpfxelvt E Uj Abyedc Very stable design. Only 6 years in operation. With 5 cycle discs. Drive via SEW gear motor with brake. Including steel base / cladding.

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Availability: short notice Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Miscellaneous: Very good used condition, fully operational Ndedport Uvzjfx Abyec

Year of construction: 2026, condition: like new (used), Disintegration, crushing, and mixing with grain size of 0-60/80 mm. For soil conditioning and mixing in lime, mixed binders, sand, compost, or other soils. Crushing and disintegration of soil clods, separation of stones, branches, roots, etc., with particle size 0-60/80 mm. Aerating, crushing, shredding, and turning of biomass, organic waste, and compost. For applying lime, we also offer a binder dosing unit in the program, available with a weighing system. The separator comes from a short-term rental and shows minimal signs of use. Ndjdpfx Asyf Autobyec Fitted with a Likufix SW48 adapter – can also be modified to suit your requirements. Price without adapter. Suitable for excavators from 16 t For wheel loaders from 8.5 t Throughput: up to approx. 65 m³/h Drain line connection required: 1 Series: TSC.154.342

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, ## 2021 Star SB-20R Type G – 20 mm CNC Sliding Head Lathe 7 axis | Twin spindles | Driven tooling | Guide-bush / non-guide-bush operation | FMB magazine bar feeder Available from Swiss CNC, this 2021 Star SB-20R Type G CNC sliding head lathe combines 20 mm bar capacity, twin-spindle machining and a versatile tooling platform for precision component production. Equipped with FANUC CNC control, it offers turning, milling, drilling, tapping and back-working capability within a compact machine layout. The 10,000 rpm main spindle and 9,000 rpm sub-spindle both feature C-axis control, supporting accurately positioned machining operations on the front and rear of the component. The fully independent sub-spindle allows front- and back-working operations to overlap where the component and programme permit, helping reduce cycle times and minimise additional handling. ### Guide-bush and non-guide-bush flexibility A key feature of the SB-20R Type G is its ability to switch between guide-bush and non-guide-bush operation. Guide-bush mode supports the material close to the cutting point, making it particularly suited to slender components and longer turned features. For shorter components, non-guide-bush operation can reduce bar remnant length and improve material utilisation. This flexibility allows manufacturers to adapt the machine to different component geometries and production requirements. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SB-20R Type G | | Year of manufacture | 2021 | | Maximum machining diameter | 20 mm | | Controlled axes | Seven: X1, Y1, Z1, C1, X2, Z2 and C2 | | Maximum headstock stroke — guide-bush mode | 205 mm | | Headstock stroke — non-guide-bush mode | Up to 2.5 × bar diameter, maximum 50 mm | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 9,000 rpm | | Sub-spindle chucking capacity | 20 mm | | Spindle positioning | C-axis control on both spindles | | CNC control | FANUC CNC | | Rapid traverse | Up to 35 m/min | ### Tooling capability - Gang-type turning-tool arrangement, with six 12 mm or seven 10 mm square turning-tool positions, depending on the fitted tool block. - Four front-working sleeve positions for end-working operations. - Cross-drilling and milling capability, with modular cartridge tooling configurations available for different machining requirements. - Four-position back-working station, supporting static or driven tooling according to configuration. - Independent sub-spindle movement for component transfer and rear machining. ### Included equipment - FMB Turbo 2-20 automatic magazine bar feeder for 3.2 m bar stock. - Filtermist FX mist extraction system. - LNS MH500 Turbo swarf conveyor. - FireTrace fire suppression system. - Selection of tooling and workholding. The supplied bar feeder, extraction and swarf-handling equipment provide a practical package for manufacturers looking to add automated 20 mm bar-machining capacity. Njdpfxez U Acme Abyedc ### Machine hours and availability Power-on and cutting hours to be confirmed. 2021 machines available in the UK, offered individually. Price on application, plus VAT. Delivery, installation and training available. Contact Swiss CNC for pricing, machine videos, inspection arrangements and further information.

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, this machine delivers an enormous throughput with its 4 shafts! Ideal for mixing and shredding, it aerates material, suitable for compost and liquid soil. High throughput even with wet soil. Price without adapter! For excavators from 24 t For wheel loaders from 13 t Weight in kg: 2300 Throughput: 64 – 95 m³/hr Leakage oil connection required: 1 Series: TSP.154.131 Ndodpjyf Au Tefx Abyjc

Year of construction: 2024, condition: used, Application with screening shafts: Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil. Also effective with moist soil. Mixing compost, sand, substrate, etc. in a single operation during screening is easily possible. Suitable for screening topsoil, construction debris, and gravel. Backfilling of structures and trenches, etc. The unit can also be fitted for other grain sizes or shaft tasks—please inquire. The separator is currently on rental. Upon return, the separator is inspected in our workshop and comes with a 12-month warranty. Njdpfxjyfwfae Abyedc Currently, an OQ45-5 is mounted, which is not included in the price. For excavators from 6 t For wheel loaders from 4 t Weight in kg: 600 Throughput: 23 m³/h Leak oil connection required: 2 Series: TSE.103.491

Year of construction: 2025, condition: used, List price €34,000 Breaking up, crushing, mixing particle size 0-60/80 mm For soil conditioning, mixing in lime, stabilizing agents, sand, compost, and other soils. Crushing and breaking up soil clods, separating stones, branches, roots, etc. Particle size 0-60/80 mm Nodpoyf Ar Sofx Abyjdc Aerating, crushing, shredding, turning biomass, organic waste, and compost For lime application, we also offer a binder spreader in our range, available with weighing system. The separator comes from a short-term rental and shows minimal signs of use. Price without adapter. The surcharge for the lightly used OQ70/55 is €4,250 For excavators from 16 t For wheel loaders from 8.5 t Throughput: up to approx. 65 m³/h Drain oil connection required: 1 Series: TSC.154.326

Year of construction: 2024, condition: good (used), Application with screening shafts: Separation of stones, branches, roots, sod, debris, etc. from still usable waste soil. Can also be used with moist earth. Mixing in compost, sand, or substrate in a single pass during screening is easily possible. Screening of topsoil, construction debris, gravel. Refilling of structures and trenches, etc. Other shaft types or screening sizes can also be supplied upon request, please ask us. The mounted adapter can be purchased or modified, not included in the price. For excavators from 4 t For wheel loaders from 3.5 t Weight in kg: 400 Throughput: 10.5 - 15 m³ / h Ndodpfxow N I Uao Abysc Leak oil connection required: no

Year of construction: 2024, condition: new, Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil, such as topsoil in landscaping and horticulture. Mixing of compost, sand, substrate, etc. in a single step during the screening process is easily possible. Screening of large stones from excavated soil. Screening of stones from various types of soil after demolition. Feeding clumped soil into a screening plant reduces waste and increases throughput. Price without adapter, other adapter types can also be installed. Currently equipped with an OQ70/55 adapter. Ndsdsyf At Aspfx Abyjc Suitable for excavators from 14 t Suitable for wheel loaders from 10 t Weight in kg: 1,450 Throughput: 44 - 65 m³/h Leak oil connection required: 2 Series: TSC.154.301

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,000 h, functionality: fully functional, ## 2008 Star SR-20RIII – 20 mm CNC Sliding Head Lathe Seven controlled axes | Twin spindles | Driven tooling | FMB magazine bar feeder | 140-bar coolant Available from Swiss CNC, this 2008 Star SR-20RIII CNC sliding head lathe combines 20 mm machining capacity, twin spindles and driven tooling for the production of precision components from bar. Equipped with FANUC Series 300iS-Model A CNC control, it offers versatile turning, milling, drilling, tapping and back-working capability. The sliding head and guide bush arrangement supports the material close to the cutting point, making the machine particularly suited to small-diameter and slender components. C-axis control on both spindles allows accurately positioned machining features, while the opposed sub-spindle enables rear-face finishing and secondary operations within the same machine cycle. Independent front- and back-working capability allows operations to overlap where the component and programme permit, helping reduce cycle times and the need for additional handling between machines. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SR-20RIII | | Year of manufacture | 2008 | | Maximum machining diameter | 20 mm | | Maximum headstock stroke | 205 mm | | Controlled axes | Seven: X, Y, Z, XB and ZB, plus C-axis control on both spindles | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 8,000 rpm | | CNC control | FANUC Series 300iS-Model A | | Rapid traverse | Up to 35 m/min | | Approximate machine weight | 2,200 kg, excluding bar feeder and ancillary equipment | ### Standard tooling layout - Six turning-tool positions for external turning, profiling, grooving and parting. - Five radial driven-tool positions for cross-drilling, milling and tapping applications. - Four front-working sleeve positions for end-working operations. - Four-position back-working station for machining components held in the sub-spindle. ### Included equipment - FMB Turbo 3-36 automatic magazine bar feeder for 3.2 m bar stock. - 140-bar high-pressure coolant system — approximately 2,000 psi. - LNS MH500 swarf conveyor, compatible with long-parts ejection. - JBS guide bush system. - TriMist Extraction - Noble fire suppression system. The combination of magazine bar feeding, high-pressure coolant and swarf handling provides a useful equipment package for repeat batch production and components requiring several machining operations. ### Machine hours Ndjdpoz Uxmbefx Abyjc Approximately 56,000 power-on hours. Cutting hours - 17,000 Available in the UK. Price on application, plus VAT. Contact Swiss CNC for pricing, machine videos, inspection arrangements and delivery or installation requirements. *Tooling layout describes the standard model configuration; the supplied toolholder package is subject to confirmation.*