Used Tec-Point Kt45S - Profi-Komplettset Neu! for sale (13,771)

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Westtech Woodcracker S200 / Root Stock Shear / Stump Shear / In stock & immediately available / NEW Jaw opening (mm): 410 Cutting width (mm): 240 Own weight (kg): 170 Recommended oil flow rate (l/min): approx. 25 - 60 Recommended operating pressure (bar): 180 - 240 Carrier machine operating weight (t): 1.5 – 6 Fjdpoykhrusfx Afksgc We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. Our warehouse holds a wide selection of various Westtech products available for immediate delivery! Mr. Herden (Tel. ...) will gladly assist you. Upon request, we can also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We can supply you with the complete range of Westtech Woodcracker products! Errors and interim sales excepted! = Further information = Intended use: Construction Please contact Marius Herden for further information.

Condition: used, For inquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker C300 Felling Grapple / incl. endlessly rotating tiltator / incl. collection grapple / NEW unit / in stock & immediately available Softwood cutting diameter (mm): 350 Hardwood cutting diameter (mm): 300 Grapple opening (mm): 1,430 Shear opening (mm): 550 Own weight (basic – fully equipped) (kg): 750 – 1,080 Fedpfx Afoyix Nnekogc Recommended main circuit flow rate (l/min): 70 – 150 Recommended auxiliary circuit flow rate (l/min): 45 – 60 Recommended operating pressure (bar): 280 Carrier vehicle operating weight (t): 12 – 18 Equipment: - incl. Autospeed function - incl. collection grapple - incl. endlessly rotating tiltator - incl. electro-hydraulic switching between collection grapple and tiltator We have a wide selection of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available for immediate delivery. Our warehouse holds a very large selection of various Westtech products that are immediately available! Mr. Herden (phone) will be happy to assist you. On request, we are also pleased to provide a financing offer. We are an official Westtech sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are also one of the largest commercial vehicle dealers in Germany, with 800 used vehicles in stock. We supply the full range of Westtech Woodcracker products for you! Errors and prior sale excepted! = Further Information = New: Yes Part suitable for: Forestry applications Contact Marius Herden for more information.

Condition: used, functionality: fully functional, WLD-TEC Gasprofi 1 Gas Burner with bottle and pedal. Fodpjubc Hfsfx Afkjgc 2 for sale. 1 piece/200 EUR. Good working condition. Please check out our other listings as well.

Condition: new, Siemens Simatic S7 6ES7138-4FC01-0AB0 PROFIsafe, serial number: C-ANTU9001, revision: 2, unused in opened original packaging, 100% functional, scope of delivery as shown in photos. Fedpsy Nr Tusfx Afkjgc

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2020, next inspection (TÜV): 01/2027, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Walking Floor semi-trailer K100 92 m³ 10 mm Floor, New MOT (TÜV) General Manufacturer: Knapen Trailers * Model/Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of registration: Germany * Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Gross permitted weight: 36,000 kg 202003-0071956-r_order-configur? * Max. axle load: 24,000 kg * Max. kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered walking floor semi-trailer * Axle version: fixed, fixed, fixed ----Dimensions * External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height front: 2,690 mm * Internal height rear: 2,785 mm * Coupling height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st–2nd axle: 1,310 mm * Axle spacing 2nd–3rd axle: 1,310 mm ----Axles & Running Gear * 3 x SAF 9 t Intradisc+ Integral CD off-road axles * All axles fixed * Disc brakes Ø 430 mm * 10-bolt wheel mount * Air suspension with standard control console (left in front of axles) * Lift axle, fully automatic via EBS * Including hill start assist (3x brakes) * Radio remote control for lift axle ----Tyres & Rims * Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels in total * No spare wheel ----Body * Closed sidewalls left and right * Sliding partition wall (min. ground clearance 100 mm) * Rear doors with external locking rods * One locking rod per door * Top rail made of steel, swings out left and right * Platform at front bulkhead * Ladder at front bulkhead, left and right * Standard roof bows Ø 60.3 mm (4 pcs) * Bow spacing: 3 x approx. 4,100 mm * Tarpaulin 680 g/m² (RAL 9006 white aluminium) * Tarpaulin supports, 3-position (4 pcs) * Lashing straps (4 pcs) ----Floor / Walking Floor * Cargofloor system CF-500 SL-C * Electric control * Corrugated aluminium floorboards 10 mm (21 boards) * Fixed front wall * Stainless steel plate at rear under floor ----Attachments * JOST landing legs with compensating device * Plastic toolbox, left in front of axles (1000 x 500 x 500 mm) * 30 L water tank with soap dispenser * Closed side underrun protection * Swinging mudflaps * Anti-spray mat on 3rd axle * Long ladder with extendable rear step and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting * 6 x round LED tail lights (3-chamber) * LED fog and reverse lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulations * LED work lights at rear (radio remote controlled) * LED work lights near landing legs (radio remote controlled) * LED LCG-2 switch unit ----Hydraulics / Connections * ISO-N and ISO-S connectors + 15-pin electrical socket * Knapen Trailers V1 radio remote control Fgjdpfx Ajyrvt Aofksc * Hydraulic connections centred on front wall (vertical) * Pressure line left, return right * Additional hydraulic connections at landing legs * Brake connections present * Acoustic reverse warning (manually adjustable) ----Paintwork * Body in RAL 7011 iron grey * Wheel hubs in RAL 2008 light red-orange * Chassis and underside unpainted If you have any further questions, I am at your disposal.

Condition: used, machine/vehicle number: 007134, Type of edging: Thin edge, Thick edge, Solid wood Fgedpfx Afot Hmtzskjc Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: like new (used), Year of construction: 1991, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 250 t, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, punching force: 250 t, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Fsdpfsu Dxb Tox Afksgc Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally available with F705, F805, F905 incl. L436 Fly-Jib and V20 winch!!! TipMatic – Automatic Transmission Fsdeyxinzopfx Afkjgc 8x2 Three steered axles STEERED / LIFT axle Front support approx. 14,000 KG Platform body with drop sides 6200x2550x600 mm Access steps Checker plate flooring Removable drop sides 9 x LED lighting units Extendable overwidth markings to 3,500 mm Start/Stop Amber beacons 8 x stake pockets 6 x lashing rings 6500 daN Toolboxes Towing hitch (AHK) Storage compartments Utility boxes 20-foot container locks Perforated side profile with lashing rings 2500 daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, wire winch, cross-format radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory package for winch operation, folding pulley, quick coupling between main boom and fly jib, and much more... TECHNO SERIES!! NEW CRANE model Infinite slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Dual knuckle lever system with PROLINK (overbending jib up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical warning (90% and 100%) Pressure limiting and load-holding valves XF-System (Extra Fast) + XP-System (Extra Power) + FL-System (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on display Danfoss D900 control block with 4 control valves mounted to crane pillar Emergency manual control for crane functions High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted to crane base Hydraulic support legs, hydraulically extendable on both sides, support width 10.00m, support can be operated via remote control Standard color RAL 3020 traffic red – all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Load hook and mounting bridles (short/500mm) Travel position: folded transversely to driving direction Note: Observe on-board voltage / 12V or 24V, standard is 24V FASSI stability control FSC-TECHNO Fassi V7S remote maxi – 8 linear levers Proportional control block for support legs 180° hydraulically tiltable outriggers – both sides Preparation for operation with variable displacement pump (LS) Control system for 2 additional functions with 2 hose guides / hxp-techno Auxiliary jib (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct for jib, fitted for 2 functions Control system for auxiliary function (winch) Winch type V20 – 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently installed rope guide rollers for operation with auxiliary jib AWC – (Automatic Winch Control) for crane – automatic winch management AWC – (Automatic Winch Control) for JIB – automatic winch management Work lights operable via display or remote 1 LED work light fitted to knuckle boom 1 LED work light fitted to jib LED for 2 outrigger legs, not fitted (crane) LED for 2 outrigger legs, not fitted (auxiliary support beam) Electrical rotary manifold with 14 slip rings 1 zinc primer from 720RA to F820RA Zinc primer for JIB “L42” Additional cost for Dinitrol application (cavity protection) Additional cost for stainless steel

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally available with F705, F805, F905 incl. L436 Fly-Jib and V20 winch!!! TipMatic – Automatic Transmission 8x2 Three steered axles STEERED / LIFT axle Front support approx. 14,000 KG Platform body with drop sides 6200x2550x600 mm Access steps Checker plate flooring Removable drop sides 9 x LED lighting units Extendable overwidth markings to 3,500 mm Start/Stop Amber beacons 8 x stake pockets 6 x lashing rings 6500 daN Toolboxes Fsdpfx Aeyxa Dtefksgc Towing hitch (AHK) Storage compartments Utility boxes 20-foot container locks Perforated side profile with lashing rings 2500 daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, wire winch, cross-format radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory package for winch operation, folding pulley, quick coupling between main boom and fly jib, and much more... TECHNO SERIES!! NEW CRANE model Infinite slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Dual knuckle lever system with PROLINK (overbending jib up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical warning (90% and 100%) Pressure limiting and load-holding valves XF-System (Extra Fast) + XP-System (Extra Power) + FL-System (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on display Danfoss D900 control block with 4 control valves mounted to crane pillar Emergency manual control for crane functions High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted to crane base Hydraulic support legs, hydraulically extendable on both sides, support width 10.00m, support can be operated via remote control Standard color RAL 3020 traffic red – all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Load hook and mounting bridles (short/500mm) Travel position: folded transversely to driving direction Note: Observe on-board voltage / 12V or 24V, standard is 24V FASSI stability control FSC-TECHNO Fassi V7S remote maxi – 8 linear levers Proportional control block for support legs 180° hydraulically tiltable outriggers – both sides Preparation for operation with variable displacement pump (LS) Control system for 2 additional functions with 2 hose guides / hxp-techno Auxiliary jib (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct for jib, fitted for 2 functions Control system for auxiliary function (winch) Winch type V20 – 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently installed rope guide rollers for operation with auxiliary jib AWC – (Automatic Winch Control) for crane – automatic winch management AWC – (Automatic Winch Control) for JIB – automatic winch management Work lights operable via display or remote 1 LED work light fitted to knuckle boom 1 LED work light fitted to jib LED for 2 outrigger legs, not fitted (crane) LED for 2 outrigger legs, not fitted (auxiliary support beam) Electrical rotary manifold with 14 slip rings 1 zinc primer from 720RA to F820RA Zinc primer for JIB “L42” Additional cost for Dinitrol application (cavity protection) Additional cost for stainless steel

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally available with F705, F805, F905 incl. L436 Fly-Jib and V20 winch!!! TipMatic – Automatic Transmission 8x2 Three steered axles STEERED / LIFT axle Front support approx. 14,000 KG Platform body with drop sides 6200x2550x600 mm Access steps Checker plate flooring Removable drop sides 9 x LED lighting units Extendable overwidth markings to 3,500 mm Start/Stop Amber beacons 8 x stake pockets 6 x lashing rings 6500 daN Toolboxes Towing hitch (AHK) Storage compartments Utility boxes 20-foot container locks Perforated side profile with lashing rings 2500 daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, wire winch, cross-format radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory package for winch operation, folding pulley, quick coupling between main boom and fly jib, and much more... TECHNO SERIES!! NEW CRANE model Infinite slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Dual knuckle lever system with PROLINK (overbending jib up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical warning (90% and 100%) Pressure limiting and load-holding valves XF-System (Extra Fast) + XP-System (Extra Power) + FL-System (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on display Danfoss D900 control block with 4 control valves mounted to crane pillar Emergency manual control for crane functions High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted to crane base Hydraulic support legs, hydraulically extendable on both sides, support width 10.00m, support can be operated via remote control Standard color RAL 3020 traffic red – all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Load hook and mounting bridles (short/500mm) Travel position: folded transversely to driving direction Note: Observe on-board voltage / 12V or 24V, standard is 24V FASSI stability control FSC-TECHNO Fassi V7S remote maxi – 8 linear levers Fgedpeyw Dk Iofx Afkec Proportional control block for support legs 180° hydraulically tiltable outriggers – both sides Preparation for operation with variable displacement pump (LS) Control system for 2 additional functions with 2 hose guides / hxp-techno Auxiliary jib (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct for jib, fitted for 2 functions Control system for auxiliary function (winch) Winch type V20 – 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently installed rope guide rollers for operation with auxiliary jib AWC – (Automatic Winch Control) for crane – automatic winch management AWC – (Automatic Winch Control) for JIB – automatic winch management Work lights operable via display or remote 1 LED work light fitted to knuckle boom 1 LED work light fitted to jib LED for 2 outrigger legs, not fitted (crane) LED for 2 outrigger legs, not fitted (auxiliary support beam) Electrical rotary manifold with 14 slip rings 1 zinc primer from 720RA to F820RA Zinc primer for JIB “L42” Additional cost for Dinitrol application (cavity protection) Additional cost for stainless steel

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). OilQuick OQ70-55 Adapter Plate / Bolt-on Adapter / NEW / in stock & immediately available Price: €4,190.00 net / €4,986.10 gross A drawing of the hole pattern is available in the photos. - 2x 1/2" coupling - 2x 3/4" Poly couplings - 2x 1" coupling - Also available from stock with leak oil line coupling! Additional charge: €440.00 net - Excavator class: 18 to 32 tons - Weight: 302 kg Suitable for many attachments such as hydraulic breakers, sorting grabs, and also for the following Westtech products: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leak oil line) - Westtech CS580 (requires leak oil line) - Westtech CS780 (requires leak oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All matching Westtech products are also in stock and immediately available! Fodpfxjyl Hgye Afksgc We have many more OilQuick adapter plates in stock for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. Financing offers available on request. We are official sales and service partners of: - OilQuick - Holp - Gierking GMT - Weber MT - Westtech - DMS - Seppi M. - Magni Telescopic Handlers - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used commercial vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete OilQuick range! Errors and prior sale excepted! = Additional Information = Application: Construction Please contact Marius Herden for more information.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). OilQuick OQ65 Adapter Plate / Screw Adapter / NEW / In Stock & Immediately Available Price: €3,690.00 net / €4,391.10 gross Two bolt patterns available. Drawings of the bolt patterns can be found in the photos. - 2x 1/2" couplings - 1x 3/4" poly coupling - 2x 3/4" couplings - Also in stock: coupling for leak oil line! Surcharge: €375.00 net - Excavator class: 14t – 22t - Weight: 206 kg Suitable for various attachments such as hydraulic breakers, sorting grabs, and also for the following Westtech products: Small bolt pattern: - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 Large bolt pattern: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leak oil line) - Westtech CS580 (requires leak oil line) - Westtech CS780 (requires leak oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All matching Westtech products also in stock and immediately available! We have many more OilQuick adapter plates in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. We can also offer you financing options upon request. We are an official dealer and service partner for OilQuick, Holp, Gierking GMT, Weber MT, Westtech, DMS, Seppi M., Magni telehandlers, JCB construction equipment, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We provide the complete OilQuick range for you! Errors and prior sale excepted! Fgsdpeyl Hgaefx Afkjc = More information = Intended use: Construction Please contact Marius Herden for further information.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). OilQuick OQ45-5 Adapter Plate / Bolt-On Adapter / NEW / in stock & immediately available Price: €2,390.00 net / €2,844.10 gross Bolt pattern drawing can be found in the photos. 2x 1/4" connectors 1x 1/4" poly connector 2x 1/2" connectors Excavator class: 5 to 12 tons Weight: 88 kg Suitable for many attachments such as hydraulic breakers, sorting grabs, and also for the following Westtech products: - Westtech CL190 - Westtech CL260 - Westtech C250 Fsdpfx Afoyl Hf Njkogc - Westtech G850 All compatible Westtech products are also available from stock! We carry many more OilQuick adapter plates in our warehouse, all available for immediate delivery! Mr. Herden (tel. ...) will be happy to assist you. Upon request, we are happy to offer tailored financing options. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete OilQuick product range! Errors and prior sale excepted! = Further information = Application: Construction Please contact Marius Herden for further information.

Condition: new, For inquiries regarding the attachment, Mr. Herden is happy to assist you (by phone at ...). Liebherr Likufix SW48 Adapter Plate / NEW / in stock & immediately available Price: €5,690.00 net / €6,771.10 gross Two hole patterns available. Drawings of the hole patterns can be found in the photos. - Likufix SW48 adapter plate is fitted with 4 connections - Also available from stock with connector for leakage oil line! Surcharge: €375.00 net - Excavator class: 15t – 35t - Weight: 258 kg Compatible with many attachments such as hydraulic hammers, sorting grabs, and also suitable for the following Westtech products: Small hole pattern: - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 Large hole pattern: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leakage oil line) Fgsdpfxoykhuio Afkjc - Westtech CS580 (requires leakage oil line) - Westtech CS780 (requires leakage oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All compatible Westtech products are also in stock and immediately available! Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and ready for immediate delivery. Mr. Herden (Tel. ...) will gladly assist you. We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Holp. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Westtech. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telescopic handlers. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = More information = Intended use: Construction Please contact Marius Herden for further information.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Liebherr Likufix SW33 Adapter Plate / NEW / In Stock & Immediately Available Price: €4,690.00 net / €5,581.10 gross Two bolt patterns available. Drawings of the bolt patterns can be found in the photos. - Likufix SW33 adapter plate is pre-fitted for 4 lines - Also available from stock with a connector for a leakage oil line! Surcharge: €375.00 net - Excavator class: 8t – 20t - Weight: 160 kg Suitable for many attachments such as hydraulic hammers, sorting grabs, as well as for the following Westtech products: Small bolt pattern: - Westtech CL190 - Westtech CL260 - Westtech C250 - Westtech G850 Large bolt pattern: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 Fsdpfxjykhucj Afkogc - Westtech CS610 compact (requires leakage oil line) - Westtech CS580 (requires leakage oil line) - Westtech CS780 (requires leakage oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All matching Westtech products are also in stock and immediately available! Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. Mr. Herden (Tel. ...) will be happy to advise you. On request, we will also be pleased to provide you with a financing offer. We are an official sales and service partner for OilQuick, Holp, Gierking GMT, Weber MT, Westtech, DMS, Seppi M., Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, and Iveco. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Subject to errors and prior sale! = Further Information = Intended use: Construction Please contact Marius Herden for more information.

Condition: new, Year of construction: 2018, NEW PRODUCT at a special price Tactile coordinate measuring machine from Innometrik Fodjdyl H Njpfx Afkjgc Measuring range 1200 x 3000 x 1000 Maximum workpiece weight: 1000 Kg Accuracy MPEE: 2.2 + L / 350 (in μm) Scale resolution: 0.1 / 0.5 in μm - Air bearings on all axes Linear speed: 300mm / s Volumetric speed: 520 mm / s Touch probe: Renishaw Tp200 incl. 3 modules (SF, HF, LF) and probe changer 3 compartment Software: OptiCheck 4.5 & Virtual DMIS (separate partitions) Optionally Polyworks according to customer requirements -Incl. PC (Windows 7) Alternatively Windows 10 -Incl. 2 monitors -Incl. Mouse keyboard Picture: sister device

Condition: good (used), Year of construction: 2012, (Please provide us with your offer price.) Sales only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Two machines of the same type are being sold. Year of manufacture: 2012 and 2015. Technical data can be found in the attached handout. Any warranty rights are excluded. Fgjdpfx Aoy Ty Hdsfksc We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: as good as new (ex-display), Year of construction: 2021, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Equipment: documentation/manual, lighting, AIM coordinate measuring centers are the technical successors of the Mahr Mahr multisensor coordinate measuring coordinate measuring machines. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm weight: approx. 1.200 kg max. workpiece weight: on glass plate approx. 40 kg Accuracies: U1=1,9 + L/200 U2=2,4 + L/150 U3=2,9 + L/100 (L= measuring length in mm) increased accuracy on request traversing speed: 200 mm/s acceleration: 400 mm/s scale resolution: 0.0001 mm Multisensor sensor unit (MSH) optical/tactile/laser -incl. high-precision USB camera with 2-stage zoom with telecentric beam path -incl. PTL01 TTL point laser, highly accurate, telecentrically coupled in -incl. Renishaw TP200 integrated tactile probe system, optionally extendable -incl. Quad-Light LED Power Ringlight, programmable incident light -incl. LED power transmitted light -incl. Nikon precision lens 5x (optional 3x, 10x, 20x, 50x) C-Mount Fsdpfx Afsg Ewk Rekjgc Technology -incl. calibration standard with factory calibration certificate, consisting of glass plate "circle", calibration sphere and ring gauge Transfer -State-of-the-art PT200 CNC controller system in a solid, industry-standard control cabinet -PCI-BUS system for fast internal data transfer in real-time operation -Extendable 19" controller rack for optimum access in case of servicing -modular controller concept open for later upgrades and retrofits -service-optimized controller design fast access and service times -Integrated 64-bit broadband bus technology with Ech [...]

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Fjdpfxsdyah Sj Afkegc Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: used, Year of construction: 1994, Mechanical sorting and conveying unit Fsdpfx Aswtnl Usfkjgc

Year of construction: 2026, condition: new, ProfiStop Omicron is a heavy-duty solution for high-productivity cutting of heavy steel or timber. Run your heavy-materials production with precision and accuracy of a Swiss watch. • Fully automated servo motor cut lengths measuring • Simple to use high-accuracy heavy materials cutting • Heavy duty 120+ kg recommended material weight • Ideal for hardwood timber and structural steel • Automated and streamlined jobs management • Label printing and bar-code / QR jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 2 m, 4 m, 6 m, 8 m, 10 m, 12 m, 14 m. Highly suitable for: Fedjf Dqp Eopfx Afkegc • Structural steel processing • Steel frames fabrication • Agricultural manufacture • Steel tube bending • Retail steel sales Can be used with all your existing saws including: • Band saws • Industrial drop saws • Guarded up-cut saws • Radial arm saws • Drills and presses Model: ProfiStop Omicron Length: 10 m Stroke: 9560 mm Pushing capacity: 120-400 kg Software: Optimiser Supplied with a roller table or as a linear unit only for installation to your existing tables. The quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Condition: good (used), Short-stroke cylinder, pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder Fgodpsv Ab Hlofx Afkoc -stroke: 50 mm -Piston: Ø 50 mm -Piston rod: Ø 16 mm -Number: 2x available -Price: per piece -Dimensions: 65/70/H95 mm -Weight: 0.65 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders Fodsdkzvlspfx Afkogc -Stroke: 250 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Total length: 570 mm -Total length extended: 820 mm -Number: 4x available -Price: per piece -Dimensions: 96/96/H570 mm -Weight: 6.4 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 220 mm (limited) -Piston diameter: 80 mm -Piston rod: 25 mm -Total length: 555 mm -Total length extended: 775 mm -Number: 2x available -Price: per piece -Dimensions: 95/95/H555 mm Fgjdodkx T Aopfx Afkoc -Weight: 6.45 kg/piece

Condition: good (used), Stick electrodes 3.25 x 350 -Type: CP 33033 Fjdofcvf Uopfx Afkegc -Analysis: 0.1C-18Cr-8Ni-6Mn remainder Fe. -Price: per package -Number: 4 packages available -Weight per package: 5.2 kg