Used Schorr Rr12Hhef 2,5M Mit Freihub for sale (7,325)

Year of construction: 2021, operating hours: 10 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S21MythoEasyLow04, Exhibition machine - like new. MYTHO EASY Low Very low height machine Winding height 2400 mm Turntable 1650 mm Redpfx Afsx Ta Nxenot LP Flat turntable 30mm flat - 500mm long Max. Load weight: 1200 KG PowerStretch 200%, changeable by gear wheels 150-200-250% Automatic adjustable double cord formation - see pictures. Automatic. Cutting Optionbal: Film clamp on turntable German. Schuko plug 6 programs individually storable Further demonstration units available immediately from stock. Prices ex stock Ludwigsburg

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" Rjdpfsykud Rsx Afnet FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Rsdpsyktrtefx Afnet Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Rjdpfxjykub Ao Afnot FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: like new (used), first registration: 12/2023, Year of construction: 2023, operating hours: 160 h, Hydraulic oil cooler High-performance hose protection LED light on boom Quick coupler MS01 Standard equipment of the machine, width: 710 mm / 1,100 mm extended 180 mm rubber tracks Double-acting auxiliary hydraulics Two travel speeds CE certification Rjdpfsx Tn Upox Afnet This offer is non-binding; no guarantee for equipment details. Subject to errors, changes, and prior sale!

Condition: new, Year of construction: 2026, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Maximum temperature: 250°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Volume: 8,820 liters - Control: Eurotherm Nanodac Controller/recorder with color touchscreen display - 2 pcs. recirculation fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - 2 pcs. fresh air fans - Automatic dampers - Electrical design: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Temperature accuracy: +/- 6 K in an empty oven Rodpfx Afsv Hg Eujnst - Documentation, CE certificate of conformity - Electrical circuit diagram with spare parts list Note: The oven floor is not insulated but fitted with stainless steel sheet. This allows unrestricted entry for all track widths. Alternatively, an insulated floor can be offered (with customer-defined entry rails). We offer new and used industrial furnaces, which we can also retrofit and upgrade according to customer requirements. Furnace, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber furnace, heating oven, chamber recirculation oven, tempering oven, annealing oven, temper oven, annealing oven.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Completely overhauled, stock item, 12-month warranty, no solvent furnace! - Max. temperature 250 °C - Total steam chamber 20.5 m³ - Usable dimensions (LxWxH) 2300 x 2750 x 2200 mm - Jumo Imago 500 controller - Heating capacity 36 kW - Max. loading capacity of the furnace car: 6000 kg, electrically driven - Electric supply and exhaust air dampers by Belimo - Exhaust fan controlled via frequency inverter - Installation dimensions (LxWxH): 3000 x 3000 x 3125 mm plus track in front of the furnace - Own weight approx. 3500 kg - Free-standing control cabinet - Documentation Rsdpfx Aettbf Ujfnst - Electrically tested and supplied with current DGUV test protocol Inspection in our warehouse by arrangement. Car bottom furnace, oven, industrial furnace, convection furnace, chamber convection oven, tempering furnace, heat treatment furnace, drying oven, tempering oven, chamber furnace, drying cabinet,

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Rsdpfxewauaxj Afnet

Condition: new, For sale: Rjdjw Skr Tjpfx Afnot ALU plates with certification from surplus stock and residual inventory. * - Description: ALU / AlMg4.5Mn (5083) with certificate -----2x----- - Aluminium rectangular plate / AlMg4.5Mn (5083) with certificate - Length: 2205 mm - Width: 2504 mm - Height: 60 mm - Weight per plate: 911 kg - Purchase price per plate: €5,374.90 | €5.90/kg - * - Sale price per plate: €2,687 / negotiable - * -----2x----- - Aluminium rectangular plate / AlMg4.5Mn (5083) with certificate - Length: 2205 mm - Width: 2504 mm - Height: 70 mm - Weight per plate: 1,063 kg - Purchase price per plate: €6,271.70 | €5.90/kg - * - Sale price per plate: €2,687 / negotiable - * * Prices are net, VAT excluded * The material comes from surplus stock and residual inventory and is also sold individually. * IMPORTANT: Please note that, for logistical reasons, we are currently only selling within Europe. This means that all purchases and transactions are limited to customers within this geographical region. * “The seller excludes any warranty for the purchased goods. The goods are sold as is, with no guarantee of suitability for a particular purpose or freedom from defects. The buyer confirms that they have inspected the goods before purchase and are satisfied with their condition. The seller accepts no liability for damages resulting from the use of the goods. Any claims by the buyer against the seller are excluded.” * Status: 14.04.2026 * I am happy to answer any questions or provide further information at any time.

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Rodjyym Sajpfx Afnjt

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany Rjdsh R Taqepfx Afnjt - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg Redpfx Aemhhy Njfnet - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: used, Year of construction: 1995, functionality: fully functional, controller model: DNC 80, degree of automation: manual, Jonescheit Hytap 30 with DNC 80 – robust press brake featuring proven control system For sale is a Jonescheit Hytap 30 equipped with DNC 80 control. This is a robust and reliable press brake suitable for use in both workshop and production environments. The machine is designed for precise bending operations and stands out due to its solid construction and user-friendly operation via the DNC-80 control unit. It is an attractive solution for companies seeking a fully functional and immediately available press brake. Specifications: Redpfoyxakysx Afnot Manufacturer / Model: Jonescheit Hytap 30 Control: DNC 80 Year of manufacture: 1995 Type: manual Condition: used, fully functional Notes: The machine is sold without tooling. Inspection and test run on site are possible. Condition: Used and ready for operation. Conclusion: A solid press brake for operators seeking a field-proven machine with DNC control. Ideal for on-site inspection and functional testing.

Condition: new, Year of construction: 2026, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm - Capacity: 9,000 liters - Control: Eurotherm Nanodac, 100 programs with 25 segments each; additional 100 programs can be stored/loaded via FTP or a USB flash drive - 2 recirculating air fans - Double doors with safety door sensors - Over-temperature protection: Eurotherm 3216i - Control/recorder unit with color touch display - Robust steel construction, exterior in anthracite - Motorized dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating power: approx. 70 kW - Entry rails, recess for cart loading - Documentation, CE declaration of conformity - Electrical schematic with spare parts list We are happy to offer transport, installation, and staff training upon request. Also available as a new unit with exhaust fan and other equipment! Delivery time approx. 10–12 weeks. Please contact us! We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Rjdpfxjlkb Ezs Afnot Inspection in our machine hall possible at any time by appointment. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heating cabinet, recirculating air oven, chamber furnace, heating up oven, chamber recirculation air oven, annealing oven, tempering oven.

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. Redpfx Afjyxr T Tenot The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0729389557300, load capacity per storage section: 160 kg, total length: 162,000 mm, total height: 2,500 mm, shelf height: 2,500 mm, shelf length: 162,000 mm, frame height: 2,500 mm, load per truss pair (max.): 160 kg, frame width: 600 mm, number of shelf rows: 23, 11 double-row and 1 single-row shelving units, Sendzimir galvanized, each with a length of 7.03 m, 2.5 m high, 0.6 m deep, each featuring 7 sections with a clear width of 0.97 m, and 7 shelf levels per section, shelf load capacity of 160 kg. - 184 frames (FR25060), pre-assembled, 2500x600 - 1127 shelves (FB097604), 970x600x40 - 88 connectors for double rows (FBDV-Set) - 22 double cross bracings (VK2510) - 23 load capacity signs (BSMcP) Frames pre-assembled Shipping / Delivery: - Maximum 20 working days after receipt of payment Rsdpfxjyy I Ene Afnst - Delivered free to site / assembly location - Unloading from the truck to be carried out by the buyer using their own lifting equipment - Delivery available throughout Germany mainland, except islands! Deliveries to EU countries upon individual agreement.

Condition: new, Year of construction: 2025, load capacity: 1,200 kg, lifting height: 4,200 mm, fuel type: electric, mast type: triplex, construction height: 1,982 mm, power: 0.65 kW (0.88 HP), battery capacity: 106 Ah, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 60 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 849 kg, total height: 1,982 mm, total length: 1,776 mm, total width: 800 mm, color: red, SCHORR ELECTRIC HIGH-LIFT PALLET TRUCK, 1200KG, LIFTING HEIGHT OF 4200MM WITH INITIAL LIFT CALL US: +49 5923 8968945 Easily transport heavy loads up to 1,200 kg with the SCHORR electric high-lift pallet truck. It offers a maximum lifting height of 4,200 mm. The forks have a standard length of 1,150 mm, making them ideal for both one-way and Euro pallets. The initial lift function is perfect for overcoming small obstacles or edges and enables the simultaneous transport of two Euro pallets. Thanks to the support arm lift, ground clearance is increased. Suitable for standard doorways thanks to a mast height under 2 meters and an unbeatable width of just 80 cm. With the electric SCHORR high-lift pallet truck, you can now stack pallets efficiently and ergonomically. Longer distances can be covered with ease. Its practical triplex mast makes the stacker suitable for any truck or container. CALL US: +49 5923 8968945 FURTHER ADVANTAGES OF THE SCHORR ELECTRIC HIGH-LIFT PALLET TRUCK: - Triplex mast - Electric steering - Initial lift function TECHNICAL DATA - Manufacturer (abbreviation): SCHORR - Manufacturer model code: RR12HHE5I - Capacity: 1.2 t - Model: 420E - Unladen weight including batteries: 849 kg - Drive: Electric - Tyres: Polyurethane Basic dimensions - Overall length: 1,776 mm - Overall width: 800 mm - Length inc. fork back: 626 mm - Lift: 4,200 mm - Initial lift: 120 mm - Mast height (retracted): 1,982 mm - Mast height (extended): 4,690 mm - Fork dimensions DIN ISO 2331: 60 mm x 180 mm x 1,150 mm - Outside fork spacing: 570 mm - Working aisle width with pallet: 800 x 1,200 mm (lengthwise): 2,197 mm - Turning radius: 1,400 mm Speed - Travel speed with/without load: 4.2 km/h / 4.5 km/h - Lifting speed with/without load: 0.1 m/s / 0.14 m/s - Lowering speed with/without load: 0.13 m/s / 0.11 m/s *Further technical data available upon request. CALL US: +49 5923 8968945 Rjdpfeyffbisx Afnot Our knowledgeable team is happy to answer any questions about the SCHORR electric high-lift pallet truck with initial lift, 1,200 kg, 4.2 m. You can reach us by phone at 05923/8968945 or by email. We look forward to hearing from you and assisting with expert advice. Are the acquisition costs for a high-lift pallet truck too high? No problem – we offer leasing as an attractive financing option. For questions regarding our leasing solutions, feel free to contact us by phone at 05923/8968945.

Condition: new, Year of construction: 2025, load capacity: 1,200 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, construction height: 1,970 mm, power: 0.65 kW (0.88 HP), battery capacity: 106 Ah, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 60 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 740 kg, total height: 1,970 mm, total length: 1,752 mm, total width: 800 mm, color: red, SCHORR ELECTRIC HIGH-LIFT PALLET TRUCK 1200KG LIFT HEIGHT OF 2900MM WITH INITIAL LIFT FEEL FREE TO CALL US: 004959238968945 With the SCHORR electric high-lift pallet truck, you can easily transport heavy loads up to 1200 kg. Achieve a lift height of up to 4200 mm. The forks have a standard length of 1150 mm, making them optimal for one-way and Euro pallets. The initial lift function is ideal for overcoming minor uneven surfaces or edges and allows simultaneous transportation of two Euro pallets. The support arm lift increases ground clearance. Fits through standard doorways, as the overall height / mast height is under 2 m, and the width is an unbeatable 80 cm. Redpfxsyffafs Afnst With the electric SCHORR high-lift pallet truck, you can now stack pallets efficiently and ergonomically. Longer distances can also be covered with ease. Thanks to its practical duplex mast, the pallet truck fits into any truck or container. FEEL FREE TO CALL US: 004959238968945 FURTHER ADVANTAGES OF THE SCHORR ELECTRIC HIGH-LIFT PALLET TRUCK: - Duplex mast - Electric steering - Initial lift function TECHNICAL DATA - Manufacturer (abbreviation): SCHORR - Manufacturer’s type designation: RR12HHE5I - Capacity: 1.2 t - Model: 290E - Own weight incl. batteries: 740 kg - Drive: Electric - Tyres: Polyurethane Basic dimensions - Overall length: 1752 mm - Overall width: 800 mm - Length including fork back: 602 mm - Lift: 2900 mm - Initial lift: 120 mm - Mast height retracted: 1970 mm - Mast height extended: 3377 mm - Fork dimensions DIN ISO 2331: 60 mm x 180 mm x 1150 mm - Outside fork spread: 570 mm - Working aisle width with pallet: 800x1200 lengthwise 2197 mm - Turning radius: 1467 mm Speed - Travel speed with/without load: 4.2 km/h / 4.5 km/h - Lifting speed with/without load: 0.1 m/s / 0.14 m/s - Lowering speed with/without load: 0.13 m/s / 0.11 m/s *Further technical data available on request. FEEL FREE TO CALL US: 004959238968945 Our competent team is happy to answer any questions about the SCHORR Electric High-Lift Pallet Truck with Initial Lift 1200kg 2.9m. Reach us at 05923/8968945 or by email. We look forward to hearing from you and assisting you with your purchase. Are the acquisition costs for a high-lift pallet truck too high? No problem, we offer leasing as an attractive financing option. For questions about our leasing options, please contact us at 05923/8968945.

Condition: new, Year of construction: 2025, load capacity: 1,200 kg, lifting height: 4,200 mm, fuel type: electric, mast type: triplex, construction height: 1,982 mm, power: 0.65 kW (0.88 HP), battery capacity: 106 Ah, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 60 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 849 kg, total height: 1,982 mm, total length: 1,776 mm, total width: 800 mm, color: red, SCHORR ELECTRIC HIGH-LIFT PALLET TRUCK 1200KG LIFTING HEIGHT UP TO 4200MM WITH INITIAL LIFT FEEL FREE TO CALL US: 004959238968945 With the SCHORR electric high-lift pallet truck, you can effortlessly transport heavy loads of up to 1200kg. The truck achieves a lifting height of up to 4200mm (available versions: 2900mm or 4200mm lift height to choose from). The forks have a standard length of 1150mm, making them ideal for single-use and Euro pallets. The initial lift function is perfect for overcoming minor uneven surfaces or edges and enables the simultaneous transportation of two Euro pallets. The support arm lift increases ground clearance. Both versions easily fit through standard doors, as the overall mast/cab height is under 2m and the width is a remarkable 80cm. With the SCHORR electric high-lift pallet truck you can now stack pallets more efficiently and ergonomically. Longer distances can also be covered without issue. Thanks to the practical duplex/triplex mast, the truck fits into any lorry or container. FEEL FREE TO CALL US: 004959238968945 ADDITIONAL BENEFITS OF THE SCHORR ELECTRIC HIGH-LIFT PALLET TRUCK: - Duplex / triplex mast (depending on version) - Electric steering - Initial lift function Prices depending on lift height/version: - 2,900mm lift height: €4,453.00 net - 4,200mm lift height: €6,134.00 net TECHNICAL SPECIFICATIONS - Manufacturer (short name): SCHORR - Manufacturer model code: RR12HHE5I - Load capacity: 1.2t - Model: 290E // 420E - Own weight incl. batteries: 740kg // 849kg - Drive: Electric - Tyres: Polyurethane Basic dimensions - Overall length: 1752mm // 1776mm - Overall width: 800mm - Length including fork back: 602mm // 626mm - Lift: 2900mm // 4200mm - Initial lift: 120mm - Height mast retracted: 1970mm // 1982mm - Height mast extended: 3377mm // 4690mm - Fork dimensions DIN ISO 2331: 60mm x 180mm x 1150mm - Fork outside distance: 570mm - Working aisle width with pallet: 800x1200 longitudinal: 2197mm - Turning radius: 1467mm // 1400mm Speed - Travel speed laden/unladen: 4.2km/h / 4.5km/h - Lifting speed laden/unladen: 0.1m/s / 0.14m/s - Lowering speed laden/unladen: 0.13m/s / 0.11m/s *Further technical data available on request. FEEL FREE TO CALL US: 004959238968945 Our experienced team is happy to assist you with any questions regarding the SCHORR electric high-lift pallet truck with initial lift 1200kg 2.9m / 4.2m. You can reach us by phone at 05923/8968945 or by email. Redpfx Afoyfd Twjnot We look forward to hearing from you and supporting you with professional advice. Are the acquisition costs for a high-lift pallet truck too high? No problem: we offer leasing as an attractive financing option. If you have any questions about our leasing offers, feel free to contact us by phone at 05923/8968945.

Condition: excellent (used), functionality: fully functional, mileage: 15,020 km, power: 134 kW (182.19 HP), first registration: 07/1993, fuel type: diesel, empty load weight: 7,520 kg, axle configuration: 4x4, wheelbase: 3,800 mm, next inspection (TÜV): 07/2026, fuel: diesel, gearing type: mechanical, suspension: steel, Year of construction: 1993, Top condition With TÜV Length for superstructure approx. 3.60 m 4x4 all-wheel drive Leaf spring suspension Austrian vehicle Only 15,020 km original mileage Rsdpfx Aoyzrp Hofnot Perfect for camper conversion

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Nedcon Type: NS The scope of delivery includes: 01x pallet racking beam, used incl. inner support bracket f. Chipboard thickness up to: approx. 38 mm Material color: orange Box profile: 110 x 40 mm Agraffe: 4HK (hook) Clear width: approx. 3,000 mm 02x safety pins, used Rjdpfxot Et T So Afnot Version: completely galvanized For securing the side rails against unintentional lifting out General information about the item: This item is only available for collection. Any additional transportation or shipment of this item is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x steel door, used Design: DIN - Right Material color: grey Total height: 2,210 mm Total width incl. frame: 750 mm Frame profile: RR 50x50 mm Total door height: 2,110 mm Total width door: 620 mm Door frame profile: RR 25x25 mm Mesh width: 105x22 mm Passage width: 645 mm Footplate dimensions: 140x50 mm Weight per unit: 25.76 kg Remark: Lever handle set and lock, as well as key are not included in the scope of delivery. Currently available from stock: 25 pcs. Your contact at our company: Mr.: Andre Evering Rsdpotp Hkasfx Afnet Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Note: This is a used steel locker. Slight damage (e.g., scratches, dents, dirt, or similar) may be present. The scope of delivery includes: 1x Steel locker with sloping roof, used Material color: gray Door color: gray Number of doors: 2 with ventilation grille Door handle: Turn-lock lock Overall width: approx. 610 mm Overall depth: approx. 500 mm Overall height: approx. 1,895 mm Weight: approx. 50.0 kg Locker compartment layout per door: Door handle: 1x Turn-lock lock Compartment dimensions: approx. 285 x 490 x 1,600 mm (W x D x H) Clothes rail: 1x | approx. 280 mm Hat base: approx. 285 x 307 x 400 mm (W x D x H) Lockable with a padlock (Padlock not included) 1x Bench with shoe rack Dimensions: approx. 610 x 810 x 410 mm (W x D x H) Shoe rack dimensions: approx. 570 x 285 mm (W x D) Weight: approx. 15.0 kg Total dimensions: approx. 610 x 800 x 2,305 mm (W x D x H) Currently in stock: approx. 21 units. Your contact persons: Redpfjwaa D Aex Afnst Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Thickness planer PANHANS Type 425 510mm The machine is in very good optical and technical condition. It comes from an assembly company and has only seen minimal use; everything is in original condition, with no components repainted. The machine has only been cleaned. Fully functional in all respects. - Equipped with kickback safety device - The planer knives are very easy and precise to adjust. Setting gauges, which can be mounted onto the cutterblock, are included to ensure maximum precision. - Chips are efficiently extracted thanks to the enclosed system. - Four-knife cutterblock for conventional strip planer knives. - The thickness table is mounted on two trapezoidal spindles, ensuring stability and torsion resistance - With protective hood, which can be lifted upward - Maximum planing width: 510mm; maximum planing height: 250mm - We provide personal delivery and demonstration throughout Germany for €220. This eliminates any risk at purchase. Delivery to other countries is also possible on request. - Quiet operation in compliance with DIN 45635 - Highly effective feed rollers; infeed and outfeed rollers are made of metal, with adjustable pressure on both rollers - There are two support rollers embedded in the table, which can be brought up when needed (particularly helpful when planing moist wood) - User manual included - Feed speed: 7 and 14 m/min, powered by a separate gear motor - 160mm extraction port - Thickness table elevates electrically, with fine adjustment via handwheel - Planing height is easily and precisely read from a mechanical counter - Achieves an extremely clean finish - 5.5 kW motor ensures virtually fatigue-free operation - The machine comes fitted with four sharpened knives - Extremely robust and durable design, top workmanship and highest quality Rjdpfxjxdu Tqj Afnjt - Ready for immediate use - 380V, 5.5kW - Speed: 5000 rpm - Year of manufacture: 1989 - Weight: approx. 800 kg - Certified GS tested version - Optimal, simple, quick, and safe operation - Heavy, solid, and durable construction—simply indestructible

Condition: good (used), Permanent magnet Rodpfxodf Ra Do Afnjt with Prism for waves from a 70 mm diameter Height 220 mm Width 340 mm 185 mm deep