Used Sba Etk 168-0110 for sale (655)

Condition: used, Flange connection, V-flange, pipe coupling, welding reduction, reduction, clapper base, pipe bend, welding bend, pipe angle -Pipe elbow: welding elbow 90° 168 pieces -Type: Ø 70 - 114 mm 39 different versions see photo parts list Nledpfx Akjq N E Rmjioh -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H400 mm -Weight: 380 kg

Condition: good (used), Complete weighing and vertical form, fill and seal twin bagging system, previously used to pack chocolate drops. This system comprises of the following equipment: 1 x Joy Conveyors product hopper. Manufacturer – Joy Conveyors Ltd. Overall dimensions – 550mm long x 610mm wide x 680mm deep. 1 x Joy Conveyors bucket elevator. Manufacturer – Joy Conveyors Ltd. 1 x Stainless-steel gantry and steps. Gantry overall dimensions – 3m long x 3m wide. 1 x High Dream AC-6B14 14-head multihead weigher with dimple pans and 10.4’’ touch-screen control panel. Manufacturer – High Dream Intelligent Machinery Co., Ltd. Weighing range – 25g – 500g. Accuracy - ±0.5g. Speed – up to 140 bags/minute (product dependent). 1 x Keymac servo-driven timing hopper. Manufacturer – Keymac Packaging Systems Ltd. 1 x Keymac vertical form, fill and seal twin bagging machine. Manufacturer – Keymac Packaging Systems Ltd. Model – BT2600 VFFS. Sealing jaws - Unit 1: Vertical - 300mm & Horizontal - 250mm. Unit 2: Vertical - 320mm & Horizontal - 250mm. Electrical requirements – 220-240 V / 60-60 hz / 1 phase. Previously running 210mm wide film. 2 x Forming tubes, each 60mm diameter. Has extension chute for larger packs. Overall dimensions - 1.9m wide x 1.6m deep x 2.1m high. Njdpfey An I Isx Akiolh 1 x Outfeed inclined conveyor. Infeed height - 200mm. Outfeed height - 1000mm. Belt dimensions - 3m long x 195mm wide. System footprint - 7.5m long x 3.4m wide x 4.4m high.

Condition: ready for operation (used), Year of construction: 2009, Offered is a Demag single-girder light crane system in portal design. Crane runway length: 10000mm, span: 8500mm, 1x crane girder incl. 2x crane travel units, hook travel: 5.0m, hoist: Demag electric chain hoist type 620S/DC-Com, load capacity: 1000kg, complete steel structure 6 columns incl. base plates, 2 crane runways, 1 crane girder. Inspection possible by arrangement. Njdjylbq Tjpfx Akijlh

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. Nledpsz Agv Ujfx Akioh - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Njdpfx Aozz Rpcokielh - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2007, The Perfecta 168 HTVC + Basa 7 is a robust and efficient machine designed for high-performance cutting and finishing tasks. Manufactured by Perfecta, this model was built in 2007 and is renowned for its durability and precision. The machine supports a format of 1680 mm, making it ideal for a variety of applications, and is currently mounted and located in Germany, ensuring easy accessibility for users in the region. The Perfecta 168 HTVC + Basa 7 features a touchscreen for easy and intuitive programming, enhancing user control and efficiency. Equipped with a monitor screen, it provides clear visual feedback and monitoring of operations. The machine includes an air table made of stainless steel, ensuring smooth material handling and precise cutting. Both left and right side tables are equipped with air functionality and are made of stainless steel, further enhancing material flow and precision. The machine is equipped with safety cells, ensuring operator safety during operation. The stack lift type is a pallet feeder, facilitating efficient material loading and unloading, and the ruettel/jogger type is BASA 7, which ensures effective material alignment and stacking. The Perfecta 168 HTVC + Basa 7 is a reliable choice for industries requiring precision cutting and finishing. Its advanced features and robust construction make it a valuable asset for any professional setting. Format: 1680 mm Equipment: Type: Perfecta 168 HTVC Nodpfxovghklo Akielh Program with touch screen Monitor Screen Air table (stainless steel) Air table Side tables with air (stainless steel): Left & right Safety cells Stack Lift Type: Pallet feeder Jogger Type: BASA 7

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. Nlsdpfx Aoz Agw Ejkioh - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each Nljdpez Ag Rrofx Akijh - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. Nsdpfx Akok Ablleislh RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second

Condition: good (used), Year of construction: 2012, Approx. 168 bays of Hofe shelving units, shelves 1.30m wide, 0.80m deep, frame height 2.50m - used: Price ex works, (net), disassembled, packaged and loaded. Per basic bay (with 2 frames and 5 shelves): €99.00 Per add-on bay (1 frame and 5 shelves): Up to 20 add-on bays: €79.00 From 21 add-on bays: €75.00 From 50 add-on bays: €69.00 For complete purchase: €59.00 Manufacturer: Hofe Type: Orion Plus Year of manufacture: 2012 / 2013 Approx. 5 shelves per bay Dimensions per shelf: approx. 1.30m x 80cm Frame height approx.: 2.50m Nljdpfxozpf Ene Akish Load capacity per shelf: 190kg Bay load: 1,000kg (some nameplates indicate 200kg, which is due to the load capacity of the platform on which the shelving units stand; the shelving units can support 1,000kg). Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area Photos show a shelving unit with a depth of 60cm!

Condition: used, Year of construction: 2014, machine/vehicle number: ET232, Used AXTRA labeller machine - 8.000 BPHTechnical Specifications & Performance DataThis modular automatic labeling machine is configured for glass bottles and can be adapted for PET or other container materials. Designed for beverage production and industrial packaging applications, it is ideal for integration into a used bottling line or as a second hand labeling solution within a complete production line. The machine features a carousel construction with variable speed control for flexible operation across multiple formats.Production speed: 5,000–8,000 bottles per hour (current setup at 5,000 bph, up to 8,000 bph)Carousel: pitch circle diameter 720 mm, 9 plates, clockwise rotationStations: up to 4 labeling stations can be mountedContainer shapes: cylindrical and shaped containers (subject to dimensional verification)Container diameter range: 45–115 mmContainer height range: 180–330 mmLabeling technologies available: cold glue; self-adhesive (adhesive)Self-adhesive non-stop carriages: 3 units, 400 mm reels; max label height 2 x 195 mm and 1 x 95 mmSelf-adhesive standard carriages: 3 units, 300 mm reels; max label height 95 mmCold glue stations: 2 units, fully overhauledAdvanced Automation & Control SystemsThe drive and control architecture supports precise, reliable operation for high-quality labeling on a variety of containers. The main carousel is driven by an asynchronous motor with inverter for smooth variable speed, while label application modules use stepper motors for accurate feed control.Main drive: asynchronous motor with inverter (variable speed)Label feed: electromechanical with stepper motorsVertical adjustment: electric vertical adjustment of the upper carouselOptical centering readiness: prepared for optical fiber and/or mark reader centeringNon-stop capability: self-adhesive carriages with pre-unwinder and rewinderProduction Line Integration CapabilitiesEngineered for seamless inclusion in a bottling equipment lineup, this machine can operate inline or as a standalone unit. Its modular frame accommodates different labeling methods and placements, enabling rapid adaptation to diverse production requirements common in beverage production and industrial packaging.Compatible with upstream/downstream conveyors and inspection systemsQuick exchange between cold glue and self-adhesive modulesMulti-format flexibility for cylindrical and shaped bottlesDesigned for PET and Glass bottle handlingSuitable for integration into complete packaging machinery and production linesMachine Condition & Maintenance HistoryThe core machine was used for internal testing and is essentially like new. Labeling stations have been overhauled to ensure reliability and performance.Core machine use: internal test machine; essentially... Nodpfxs Ady D Sj Akislh

Condition: new, range L-W-H 1680 x 470 x 1050 mm weight 137 kg 7 St. Internal dimensions of upper drawer 124.5 x 40 x 9.5 cm (WxDxH) Internal dimensions of medium drawers 78 x 40 x 6.5 cm (WxDxH) Inner dimensions of bottom drawer 78 x 40 x 14 cm (WxDxH) Interior dimensions of cabinet on the left including trash can 25 x 42.5 x 71 cm (WxDxH) Interior dimensions of cabinet on the right including shelf 41 x 42.5 x 54 cm (WxDxH) Maximum loadable weight 500 kg Worktop material wood Material of the drawer handles: aluminum Nsdsu Imfbopfx Akiolh Wheel material PP and PU Housing material metal Packed dimensions 1745 x 520 x 995 mm Packaging weight 136.5 kg

Condition: used, This listing is for the Sartorius Tare ENTRIS2202-1S Balance The unit is in full working condition and is ready for immediate use Nodpfx Akjxhfffjislh The Sartorius ENTRIS2202‑1S (also referred to as ENTRIS 2202‑1SUS in some regions) is a precision top-loading laboratory balance designed for reliable, accurate weighing of samples up to approximately 2,200 g with 0.01 g readability. Key Specifications: Capacity: 2,200 g Readability (Resolution): 0.01 g (10 mg) Repeatability: Typically 0.01 g Linearity: Approximately 0.03 g Weighing Pan Size: Around 182 mm × 182 mm (7.1″ × 7.1″) Calibration Type: External calibration (requires separate calibration weight) Display: Backlit, high-contrast screen for clear visibility Interface Options: RS‑232 port for communication with PCs or printers Built-In Functions: Includes modes for basic weighing, counting, percent weighing, animal weighing, and density determination Language Support: Multiple languages supported such as English, French, German, Italian, Polish, Russian, Spanish Other Features: Anti-theft locking capability, easy-to-clean removable pan and draft shield Stabilization Time: Approximately 1.5 seconds Dimensions & Build: Compact size, robust design ideal for lab environments

Condition: used, Technical details: cutting diameter: 260 mm saw band length: 4310 mm saw band width: 27 mm cutting range 90 degrees: round: 260 mm cutting range 90 degrees: square: 400 mm band speed: 17 - 110 m/min electrical connection: 400/50 V / Hz. total power requirement: 4 kW machine weight approx.: 1,22 kg dimension machine approx.LxWxH: 2,4 x 1,0 x 2,0 m dimensions L x W x H: 3,0 x 0,4 x 0,8 m Nledpfxoy Dc N As Akieh SBA 260/400 U = Fully Automatic Version ·Fully automatic sawing operation ·Automatic shutdown after completion of the cut ·Various accessories included (saw blades) ·Roller conveyor included *

Condition: used, mileage: 6,262 km, power: 140 kW (190.35 HP), first registration: 09/2024, fuel type: electric, empty load weight: 3,205 kg, maximum load weight: 595 kg, overall weight: 3,800 kg, axle configuration: 4x2, wheelbase: 3,520 mm, energy efficiency: A, color: white, gearing type: automatic, suspension: steel, number of seats: 3, loading space volume: 8 m³, loading space length: 3,300 mm, loading space width: 1,600 mm, loading space height: 1,700 mm, Equipment: ABS, air conditioning, cruise control, parking heater, traction control, trailer coupling, Colour: Traffic white 9016, unladen weight: 3,205 kg, gross permitted weight: 3,800 kg, cargo space (L x W x H): 3,300 mm x 1,600 mm x 1,700 mm, cargo volume: 8 m³, fabric seats, leaf suspension, tachograph, electronic stability program (ESP), traction control (ASR), automatic climate control, stationary air conditioning system, adaptive cruise control (ACC) with stop & go, comfort driver’s seat, hydraulically damped driver/passenger seat, LED headlights, digital radio (DAB), rear-view camera, rain sensor, leather steering wheel, alloy wheels, electric windows, fog lights, electrically adjustable & heated exterior mirrors, storage package, rear doors opening angle 270°, hill start assist, light sensor, AC/DC charging system (AC/DC charging), tow bar with 3.5T towing capacity. AC charging: 22 kW, DC charging (fast charge): 80 kW. Nlsdpo Afqvnefx Akish Kerstner refrigerated conversion based on: IVECO eDaily 3520L panel van—Kerstner “easyfit” insulation (k-value 0.4), electric fresh goods refrigeration system Kerstner CoolJet 206 EA for cooling during transit, grey smooth polyester floor with quintet aluminium floor plate, aluminium bump protection (approx. 16 cm high) left and right (except sliding door), horizontal semi-round lashing rails approx. 40 cm high left/right (except sliding door), LED interior lighting, 2x emergency release, water-retaining sill in the sliding door area. Basic vehicle description: Wheelbase: 3,520 L mm, Height: H2, rear wing doors, right sliding door, 3.5 t. Refrigeration unit: Kerstner CoolJet 206 EA (underfloor), temperature range: down to 0°C (fresh service), cooling capacity at 0°C: max. 1.42 kW, air flow: 581 m³/h, refrigerant: R134a (CFC-free). Dimensions/weights after conversion: cargo length: 3,300 mm, max. interior height: 1,745 mm, max. interior width: 1,620 mm, width between wheel arches: 1,224 mm (single wheel), max. sliding door width: 1,020 mm, max. sliding door height: 1,550 mm, max. rear door width: 1,292 mm, max. rear door height: 1,595 mm, vehicle height after conversion: unchanged, Kerstner weight:

Condition: good (used), Bezel, steady rest, lynette Nledpfxswtma Ds Akijh -Bezel: max. aperture Ø 168 mm -Centre height: 275 mm -technical drawing: in the photos -Dimensions total: 540/100/H610 mm -Weight: 41 kg

Condition: used, Year of construction: 1989, functionality: fully functional, Paper Guillotine PERFECTA 168 – Year 1990, equipped with new electrical system (standard-compliant retrofit) and EG Control Graphic programmer. Complete with enlarged side tables and air-assist triangles, 2 spare blades, accessories, and manuals. Very robust machine, suitable for carton production and aluminum cutting, in good condition and fully operational. Nledpfxjy Aur Te Akioh

Condition: new, machine/vehicle number: 2642039, fuel type: diesel, motor manufacturer: Volvo TWD1683GE-SV, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 7.000 kg Functional Generator capacity: 740 kVA Dimensions of cargo space: 486 x 206 x 264 cm CE mark: yes Other information Fuel consumption: 100 Liter per hour at 75% Load Generator: Stamford HCI544F1 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 985 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel Nlodpoxwhuzofx Akioh - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames Stage V Generator Stage V Aggregaat Stage 5 Generator Stage 5 Genset Stage V Gen set Stage V Generator set EU Stage V Generator StageV

Condition: used, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Year of manufacture: 1996 Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Nljdswnh Eqjpfx Akieh Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Contact roller material: Steel - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Contact roller material: Steel - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2018, Equipment: raster image processor, We offer this very good Konica Minolta AccurioJet KM-1 digital print machine, year of construction 2018. 27,2 million prints. It is placed at over plant in Szczecin in Poland. 27,2 million prints. It includes pallet feeder and delivery, Alwan colour server for creating ink saving print files, a Konica Minolta FD-9 photo spectrometer and a high tower sever rack with UPS for the rip hardware Its today dismantled and ready for transportation. Njdpfx Akez Dtvueielh If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2015, condition: used, Year of manufacture: 2015 New: No Design year: 2015 Dimensions (L x W x H): 117 x 67 x 50 cm Suitable for: trucks Price: On request VAT/Differential tax: VAT deductible Nlodpfx Ajyapb Nekish Model number: 1681816

Year of construction: 2015, condition: used, Year of manufacture: 2015 New: No Design year: 2015 Dimensions (L x W x H): 117 x 67 x 50 cm Part suitable for: trucks Price: On request VAT/Differential taxation: VAT deductible Part number: 1681816 Nedpfoyarcvsx Akislh

Year of construction: 2015, condition: used, Year of manufacture: 2015 New: No Nledpfxoyaq Drj Akijh Design year: 2015 Dimensions (L x W x H): 117 x 67 x 50 cm Part suitable for: trucks Price: On request VAT/Differential taxation: VAT deductible Part number: 1681816

Condition: used, transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: SBA,Transformer -Type: IST 075-092 -Power: 192 W -Voltage: 380-400-420V / 24V -Technical data: see photo type plate -Dimensions: 130/100/H175mm -Weight: 5.5 kg Njdpfxouqf Sws Akislh

Year of construction: 2015, condition: used, Year of manufacture: 2015 Njdex I Em Espfx Akislh New: No Design year: 2015 Model year: 2015 Dimensions (L x W x H): 233 x 67 x 62 cm Part suitable for: DAF Price: On request Value-added tax/differential tax: VAT deductible Part number: 1681830