Used Ryko Gmbh Glazing Bead Saw for sale (72,187)

Condition: new, R.& S. Keller control panel lid Dialog 11 , in opened original packaging, unused, 100% functional Duodpfx Afoi Ecmdskeu

Condition: new, R. & S. Keller Control panel Sinumerik 820 T , unused, in opened original packaging, 100% functional Dusdpfx Afsi Ecl Ssksu

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Djdpsu Tha Isfx Afkouu Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Dujdpfx Afsu Thh Eokju Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, input voltage: 230 V, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials Duodpfx Aswkpxksfksu

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis Dujdpfjwlc Stsx Afkeu - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - system for automatically determining the focus distance - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support Dusdpfxewkpx Rj Afkou - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: new, Year of construction: 2026, functionality: fully functional, laser power: 30 W, type of cooling: air, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the system is very practical and can be used anywhere. Dedpfx Afeuy H Nqeksuu The universal laser marking system LAS 22 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20 or 30 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 400 mm, total height: 690 mm, total length: 600 mm, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, space requirement height: 900 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 30 Watt (Optional: 20 Watt, 50 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) Dsdey I Nbmopfx Afkouu - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: good (used), Kistler NC joining module with dual-station/spindle unit Kistler NCFH 60 servo press with feed slide & spindle station The Kistler NCFH 60 NC joining module is integrated into an industrial dual-station/spindle unit designed for automated series production (e.g., friction welding or precision pressing). The system is characterized by exceptional precision, integrated force-displacement monitoring (piezoelectric sensor technology), and an extremely robust design capable of withstanding continuous industrial loads. Precise press-fitting and joining: Ideal for high-precision assembly processes in the automotive industry, electronics manufacturing, or general mechanical engineering. Integrated quality assurance (force-displacement monitoring): Using built-in piezoelectric sensors, the module measures the exact tensile and compressive forces acting during the pressing process in relation to position. Flexible process control: Enables advanced functions such as "joining to block," position-controlled pressing, or force-controlled joining (when combined with a suitable controller, e.g., Kistler maXYmos). Automated workpiece holding: The coupled spindle station features an automated clamping function (pneumatically or hydraulically actuated via integrated cylinders), making it perfect for automated series production and assembly lines. Sturdy machine bed: The entire mechanical assembly is mounted on a heavy-duty welded steel frame to withstand the immense forces (up to 6 tons per side) generated during operation. Duedpfx Aszcpnzefkou Joining module manufacturer: Dr. Staiger Mohilo+Co GmbH / Kistler Group Type: 2151B 60304002 Model: NCFH 60 400 300 B H C G Nominal force: 60 kN (equivalent to a pressing force of approx. 6 tonnes) Max. total spindle stroke: 400 mm Max. travel speed: 300 mm/s Motor type: AC hollow-shaft servo motor (165H-180E) Holding brake: 18 Nm Certification: CE marking Scope of delivery: Kistler NCFH 60 joining module including mounted flange coupling, yellow slide/feed guide, complete sensor cabling, and the associated spindle clamping station. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), Weiss Spray Water Test Unit Type: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit from the manufacturer Weiss Umwelttechnik. The unit is used to perform standardized water, spray water, and ingress protection tests according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch control panel. Test sequences can be automated. Unit Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800-S Spray Water Test Unit Test types: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Stainless steel test chamber Rotating test table Swivel arm system Water circulation Existing test accessories Electrical data Supply voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram no.: 82962 CE marking available Water supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: approx. 80 to 100 bar adjustable Technical data Turntable speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10 °C to 35 °C Noise level: approx. 88 dB(A) Heat dissipation to the environment: Average approx. 1 kW Maximum approx. 3.5 kW Equipment Touch control panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earth bonding point CE marking Robust industrial design Dimensions / Weight Test chamber SWT 600/800: approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door locking: approx. 2,350 x 2,400 x 1,850 mm Weight of test chamber: approx. 650 kg Dimensions of high-pressure unit: approx. 850 x 1,200 x 800 mm Weight of high-pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documents Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories Nozzle ring / spray ring Test and spray components Swivel arm accessories Flow meter Connection components Tools and keys Documentation Condition Used unit from industrial use. Visual condition see pictures. The unit can be switched on. Display and user interface are functional and visible. Further technical testing, calibration or complete functional testing has not been carried out. Duedjzachcspfx Afksu Inspection and testing on site possible and desired after prior appointment. Scope of supply Weiss Umwelttechnik SWT 600/800-S spray water test unit High-pressure unit Turntable and swivel arm Test and spray accessories as shown in the pictures Operating manual and documentation Accessories as shown in the pictures The table shown in the photos is not included in the scope of supply. Loading possible by arrangement. Transport and shipping by a suitable freight forwarder required. Dimensions, weights and technical data partially taken from documents. Information may vary. Commercial sale without warranty. Subject to change, errors and prior sale.

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Dusdpfx Aey Urtfofksu Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2005, operating hours: 71,080 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 65,000 m/min, feed rate Y-axis: 65,000 m/min, feed rate Z-axis: 65,000 m/min, total length: 8,000 mm, table length: 4,050 mm, table width: 2,050 mm, total width: 7,500 mm, spindle speed (max.): 22,000 rpm, total height: 6,200 mm, table height: 500 mm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, position of the milling head: vertikal, torque: 28 Nm, tool weight: 6,000 g, control cabinet length: 600 mm, control cabinet height: 2,600 mm, control cabinet width: 4,200 mm, tool diameter: 100 mm, As the manufacturer, we are pleased to offer this gantry milling machine from FOOKE GmbH. This machine perfectly combines dynamics with precision, making it an ideal choice for machining large components. Key Benefits of Buying Directly from the Manufacturer: Retrofit Options Available: Upon request, we can provide a customized retrofit to perfectly adapt this machine to your future production requirements. Spare Spindle in Stock: Minimize downtime – a matching replacement spindle is currently in stock at our facility and immediately available. Technical Specifications General Information: Machine Type: 5-Axis Gantry Milling Machine Model: ENDURA® 907.2LINEAR Year of Manufacture: 2005 Control Unit: Siemens SINUMERIK 840D Availability: Immediately Travel & Working Range: X-axis travel: 5,000 mm Y-axis travel: 3,000 mm Z-axis travel: 1,500 mm Max. Workpiece Dimensions: 4,000 x 2,000 x 1,000 mm (L x W x H) Milling Head & Main Spindle: Dsdpszcb D Uofx Afkjuu Tool Taper: HSK63A Max. Spindle Speed: 22,000 rpm Spindle Power Capacity: 30 kW Max. Torque: 28.6 Nm A-axis (swiveling): 220° (+/- 110°) C-axis (rotating): 365° (+/- 182.5°) Tool Changer & Dynamics: Magazine Capacity: 20 stations (for HSK63 Form A tools) Max. Tool Diameter: 100 mm Max. Tool Weight: 6 kg Rapid Traverse (X/Y/Z): 65 m/min Feed Rates: up to 65,000 mm/min Dimensions & Weight: Total Power Requirement: 150 kW Machine Weight approx.: 78 tons Footprint / Dimensions approx. (L x W x H): 7.5 x 8.0 x 6.2 m Additional Equipment Included: Head Extraction System: Equipped with an integrated head hood, designed for connection to an on-site extraction system. NC4 Laser System: Non-contact laser tool inspection and breakage detection system. RMP60 Wireless Probe: Radio-transmission workpiece measurement system by Renishaw. Roller Blind Covers Contact Us Do you have any questions or require further information regarding a tailored retrofit? Please feel free to send us a message through the platform or give us a call. As the manufacturer, we look forward to assisting you!

Year of construction: 2001, condition: ready for operation (used), HEK GmbH VGO 200 S Heating cabinet Dimensions (approx.): Width: 1035 mm Djdpfx Aeg Hzqbsfksuu Depth: 800 mm + 210 mm tube Height: 820

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2006093100701, total length: 2,900 mm, Cool it is s/s refrigerated sliding door ,type CE-8,fabrication number 2006093100701 ,year of construction 2020,dimensions door:1300mmx2050 mm,length rail :2900 mm Lot Location :Schillerdtrabe2 ,49434 Vorden ,Germany Dedpfx Afszcg Dysksuu

Condition: good (used), We sell a used robot grinding machine. The plant is in good used condition. Included in the plant are: - 1x KUKA KR30-3 industrial robot - 3x belt grinders - 1x loading table Dedpfxjh T Durj Afkjuu If you have any questions, please do not hesitate to contact us!

Year of construction: 2023, condition: new, We sell a new double belt grinder. The contact wheels can be purchased in different dimensions. Duedok D Ex Topfx Afksu Technical data: Weight: approx. 350 kg Electrical connection: see type plate of the respective drive motor Compressed air connection: 3 - 8 bar Noise level: > 85 dB(A) Contact wheels: max. Ø 350 mm x 110 mm grinding belts: max. 120 mm x 3500 mm length Suction connection: Ø 160 mm If you have any further questions, please do not hesitate to contact us!

Condition: good (used), We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm Dodpfx Aexby Sgofkouu - 1x control cabinet If you have any questions, please do not hesitate to contact us!

Condition: used, We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm Dodexlufvspfx Afksuu - 1x control cabinet If you have any questions, please do not hesitate to contact us!

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, operation weight: 2,000 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.025 m³, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, 💥 ONLY UNTIL END OF THE MONTH: 10% DISCOUNT ON THE COMPLETE SET! 💥 HT20 PRO PROMOTIONAL PACKAGE – ACT NOW & SAVE! Instead of €13,500 net, now only €12,150 net Are you looking for a compact, powerful, and ready-to-use mini excavator at an especially attractive price? Then the HT20 PRO is exactly the right choice. Take advantage of our limited end-of-month promotion and secure a fully equipped set with a 10% price advantage. ⭐ YOUR BENEFITS AT A GLANCE ✔ Genuine Kubota D902 engine – reliable, efficient, and durable ✔ Precise load-sensing hydraulics for clean and efficient operation ✔ Comfortable cabin with air conditioning and heating ✔ Adjustable undercarriage – ideal for confined sites ✔ Robust and stable steel construction for professional daily use 🔥 PROMOTIONAL OFFER UNTIL THE END OF THE MONTH The package includes: ✅ HT20 PRO mini excavator ✅ Hydraulic quick coupler ✅ 3 buckets included This gives you a ready-to-use complete solution with attractive features and maximum flexibility for your construction site. ⚙️ TECHNICAL DATA Kubota D902 Diesel 3 cylinders Power: 11.8 kW Operating weight: 2,000 kg Transport length: 2,850 mm Width: 1,220 mm Height: 2,350 mm Max. digging depth: 2,060 mm Max. reach: 3,130 mm Max. dumping height: 2,875 mm 🚀 AVAILABLE IMMEDIATELY ✔ Machine in stock ✔ Ready for operation upon delivery ✔ Delivery possible throughout Europe ✔ Spare parts and service available locally ✔ 12-month warranty 🎥 ADDITIONAL ADVANTAGES FOR INTERESTED BUYERS ✔ Upon request, we will gladly send you a video of the machine ✔ On-site personal inspection possible Duedox Hvvhepfx Afkeu ✔ Test operation available by arrangement See for yourself the condition, features, and performance before you buy. ✅ WHY THIS PROMOTION? ➡️ 10% discount on the complete set ➡️ High-quality professional features included ➡️ Immediately available and ready for work ➡️ Transparent advice and individual support ➡️ Only for a limited time until the end of the month 📍 LOCATION Rheda-Wiedenbrück ⏳ INQUIRE NOW AND SECURE THE PROMOTIONAL PRICE 👉 Contact us now and secure your promotional package with 10% discount – only until the end of the month! 👉 Video available on request – inspection and test run always possible by appointment.

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, operation weight: 2,000 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2026, operating hours: 5 h, Equipment: adjustable boom, adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Immediately available – get in and start working right away! 🔥SPECIAL PRICE UNTIL THE END OF THE MONTH: ONLY €15,555 net plus VAT🔥 Are you looking for a reliable, modern, and immediately ready-to-use mini excavator in the 2.0-ton class? The LT-20 PRO from Tec-Point GmbH impresses with its strong performance, high-quality workmanship, and maximum comfort – perfect for construction, landscaping, and municipal work. Thanks to its compact design and modern load-sensing hydraulics, this machine is ideal for tight construction sites and yet powerful enough for demanding earthmoving and foundation work. The enclosed cab with heating makes the LT-20 PRO a true all-year-round professional machine! ⭐ Your advantages at a glance ✅ Side-swinging boom – ideal for tight working areas ✅ Telescopic undercarriage 990–1,300 mm – maximum stability ✅ Load-sensing hydraulics – precise & energy-saving control ✅ Axial piston pump with variable displacement ✅ Travel motors with high/low speed ✅ Double cast counterweights – increased stability ✅ Robust 230 mm rubber tracks – durable & wear-resistant ✅ Hydraulic quick coupler included ⚙️ TECHNICAL DATA Operating weight: 2000 kg Transport weight: 1820 kg Engine: Kubota D902 | 3-cylinder diesel Power: 11.8 kW Max. operating pressure: 23 MPa Bucket capacity: 0.04 m³ Digging depth: up to 2,270 mm Digging reach: up to 3,910 mm Travel speed: 2.2 / 4.5 km/h Gradeability: 30° COMFORT & EQUIPMENT ✔ Enclosed comfort cab incl. heating ✔ Ergonomic joystick control ✔ LED work lights ✔ Radio ✔ Comfort seat for long working hours ✔ Dozer blade ✔ Hydraulic safety valves ✔ Reinforced steel structure for maximum load capacity INCLUDED IN THE SET: 3 BUCKETS + HYDRAULIC QUICK COUPLER The scope of delivery includes: ✅ 25 cm ditching bucket ✅ 50 cm digging bucket ✅ 100 cm dozer bucket ✅ Hydraulic quick coupler ➡️ Immediately ready to start on any construction site! ➕ OPTIONAL, AVAILABLE AT AN ADDITIONAL CHARGE Hydraulic tilt quick coupler with tilting function Hydraulic earth auger set up to Ø 300 mm Hydraulic hammer SERVICE & WARRANTY 12 months warranty throughout Europe Spare parts & service directly from the warehouse in Rheda-Wiedenbrück IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Europe-wide delivery possible upon request. Location: Rheda-Wiedenbrück Our machines are immediately available and ready for use. You are welcome to inspect and test all our machines directly at our site. 🔥Only available until the end of the month: LT-20 PRO including hydraulic quick coupler at a special price of €15,555 net🔥 Secure this advantage now – the offer is only valid for a limited time! Dsdpex Hg D Aofx Afkouu Request now & secure your advantage! Demand is high – secure your LT-20 PRO now. ➡️ Write to us directly via Maschinensucher or call us – we will be happy to advise you personally!

Condition: new, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: diesel, overall weight: 550 kg, maximum load weight: 500 kg, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, Secure your deal now: Special offer – 10% discount on all tracked dumpers! For a limited time only, take advantage of our current promotion: 10% price reduction on all tracked dumper models. The tracked dumper 500S stands for powerful material transport, precise unloading and reliable technology. With its hydraulic lifting function up to 1,200 mm, it is the ideal solution for direct unloading into containers, trailers or elevated loading areas – efficient, safe and time-saving. Thanks to its compact dimensions, high payload and robust design, the tracked dumper 500S is perfectly suited for confined construction sites, rough terrain and professional continuous use. Your benefits: ✅ Hydraulic lifting and tilting function 90° for comfortable unloading ✅ Lifting height up to 1,200 mm – ideal for containers and trailers ✅ Powerful Koop 173 diesel engine, 4.0 kW, EU Stage V ✅ High payload of 500 kg with compact external dimensions ✅ Optimal traction thanks to wide tracked chassis ✅ Stable, low-maintenance and durable construction ✅ Ideal for construction, landscaping, municipalities and agriculture Technical data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Self-weight: 550 kg Payload: 500 kg Hopper volume: 200 dm³ Hopper dimensions: 1,050 × 730 × 730 mm Lifting and Tilting Function: Dedpfx Afsyml D Hoksuu Maximum lifting height: up to 1,200 mm Tilting height: 1,050 mm Tilting distance: 220 mm Tilting angle: 90° Operation: hydraulic Chassis: Chassis type: Tracked chassis Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track gauge: 520 mm Driving Performance: Driving speed: up to 4 km/h Climbing ability: up to 20° Minimum turning radius: 1,150 mm Dimensions: Overall dimensions L × W × H: 1,570 × 880 × 1,450 mm Chassis width: 700 mm Application areas: The tracked dumper 500S is impressive wherever reliability, maneuverability and lifting capacity are required: Construction and civil engineering Gardening and landscaping Municipal services Agriculture Material handling in confined spaces 🔥 CLEARANCE SALE: 10% DISCOUNT ON ALL TRACKED DUMPERS Take advantage of our current special offer now: 10% discount on all tracked dumper models – while supplies last! The tracked dumper 500S is immediately available and ready for use. Ideal for anyone looking for a robust, powerful and compact transport solution for professional use. Net list price: €3,800 Special price with 10% discount: €3,420 net plus VAT Location: Rheda-Wiedenbrück Inquire now and secure your price advantage! ➡️ The offer is valid for a limited time only and while stocks last.

Year of construction: 2025, condition: new, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can pay for itself in the shortest possible time. An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Dedonq A U Aspfx Afkeuu Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Year of construction: 2025, condition: new, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can pay for itself in the shortest possible time. Dujdpfx Ajwzv Hiofkju An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Condition: new, Year of construction: 2025, functionality: fully functional, The (fish mask shape) mask machine offered here combines efficiency and safety features with an optimized fit. These product features are, among other things, thanks to the use of ultrasonic technology, an intuitive HMI with touch screen for easy and clear operation as well as an optimized and robust unrolling unit made of steel. Process steps at a glance: Feeding of the filter fleece via a web edge control system, as well as the nose wire, uniform welding of the mask with subsequent folding and separation of the base body. The next process step deals with the attachment of the earband using ultrasonic technology. Optionally, a camera inspection, stacking unit, and a tubular bag machine can be ordered separately. Duodpfx Afeh Uuhcjkju In detail: - Welded unwinding unit with a total of 4 manual tensioning shafts, magnetic powder brakes and web guide control system for feeding the filter fleece. - Nose wire is fed in by means of another unwinder. - The use of panes in combination with slim aluminum profiles allows a good insight into the production while at the same time providing full protection for the operator. - We are happy to offer you various printer systems on request to print the legally required information on your mask. - The use of ultrasonic technology and the use of durable materials such as titanium guarantee increased machine availability compared to conventional materials. - High precision through the use of servo-driven motors. - Uniform material feed and material guidance, as well as separation by means of a rotary cutter with lateral marking output. - High-resolution, user-friendly MHI's with touchscreen. - Mask body welding using ultrasonic technology with subsequent folding matrix and welding of the upper and lower surface. - Precise separation of the mask from the marking with the help of a rotary blade, with subsequent ejection of the mask and lateral ejection of the marking. - Subsequent ear band embossing by ultrasonic technology. - Optional: Camera inspection with good and bad detection - Optional: Subsequent output to a stacker. - Optional: Output to a flowpack station for individual mask sealing. Performance data & dimensions: - Power consumption: approx. 4-5 KW during operation - Power connection: 220 V/ 50 Hz - Quantities: 80 masks/min. - Compressed air: 7-10 bar - Weight: approx. 2.5 t - Dimensions: 8200x5000x1800 mm (LxWxH) - Mask dimensions closed (longest and widest point): 205 x 82 mm (+- 2mm) We would be happy to send you an individual, high-quality offer. For this we ask you to give us your company data in advance.