Used Regulator for sale (2,787)

Condition: like new (used), 0.4–10 bar / Max INLET 14 bar Application: Machinery/equipment from Glaston, etc. Width: 54 mm Height: 54 mm Pgsdpfxoy U E Ups Agxjp Depth: 133 mm Weight: 597 g Condition: like new

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values: Pedpfx Agsdz Sraexsgp Input voltage: 190 ~ 250 Volts AC Input frequency: 47-63 Hz Input current: max. 12 Amps Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relay - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-up - Condition as shown, without additional accessories and connection cables Additional connections: - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) Dimensions H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, programmable AC power source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values: Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies > 500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and crest factor - Built-in power factor correction circuit - Programmable current limiting Pjdjdz Srbspfx Agxogp - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (Printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Footprint H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition 2 units available, price per unit

Condition: used, Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve, balancing valve Pjdpfx Ageiqy Tpoxegp -Manufacturer: TA Hydronics, line regulation valve regulation valve, unused original packaging -Type: STAF-SG DN50 PN25 -Number: 3x valve available -Price per piece -Dimensions cardboard: 220/170/H270 mm -Weight: 6.8 kg/pcs

Condition: good (used), Machine for irregular glass grinding Pedpfx Ajzg Awpogxjgp

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386J02699, Year of construction: 2018, operating hours: 11,449 h, load capacity: 1,800 kg, lifting height: 3,150 mm, fork length: 1,600 mm, empty load weight: 3,100 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! Includes new safety inspection and charger! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 3,150 mm Load center: 500 mm Fork length: 1,600 mm MACHINE DETAILS Control: Dual pedal Mast type: Duplex mast with full free lift Drive type: Electric Battery voltage: 48 V Remaining battery capacity: 86% Battery test: C5 test Overall height: 2,050 mm Unladen weight: 3,100 kg Operating hours: 11,449 h EQUIPMENT Side shifter Trailer coupling Cabin Pallet forks Grammer seat Seat heating Charger Road traffic regulations-compliant lighting Front work light Pedpfx Aszmuk Ujgxsgp Rear work light

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Pgjdpfozlnxiox Agxjp Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Condition: excellent (used), Year of construction: 2021, Ref:11122 . 2021 & 2020 SIAT XL-461 Box Taping Machines. A pair of semi-automatic sealing machines with random adjustment. Meaning the machines are able to adjust themselves according to the different box dimensions. They apply automatically a 'C; strip of adhesive tape to the top & bottom of the box. Specification of each machine: Drive belt speed: 20m/min. 2 x motors kW 0.13 2 x K12R taping unit - 75 mm width Aluminium telescopic legs with millimetric guide Psdpezmx Hyofx Agxjgp Adjustable working height: 445 - 705 mm Locked stop emergency button On/Off magneto-thermic switch Adjustable descending height of the taping unit Top head pneumatic pressure regulators.

Condition: excellent (used), Year of construction: 2006, operating hours: 25,030 h, Model QUATTRO 2kw Year 2006 remanufactured by Amada specialist 2021 Traverse Method X Axis Head Traverse Y Axis Head Traverse Axis Traverse Distance 1270 x 1270 x 300mm (Z Axis) Max. Sheet Size (including 1 reposition) 2540 x 1270mm Max. Guaranteed Material Thickness 9mm Mild Steel 9mm Stainless (Oxygen Cut) 4mm Stainless (Clean Cut) Pjdjuk U I Ujpfx Agxogp 4mm Aluminium (A5052) Max. Material Weight 210Kg Max. Feed Speed 80m/min(X & Y Axis) 60m/min (Z Axis) Positioning Repeatability /- 0.005mm Axis Drive (X, Y & Z) AC Servo Motor Workchute 1270 x 550mm Assist Gas 4 Ports, 6 Selections Auto-Change Electric Power Required (Includes Oscillator) 43KVA 400V /- 10% 50Hz Air Required Machine Only 6.0 Kgf/cm² 250 l/min Machine Length 3123mm Machine Height 2275mm Machine Weight 4.9 tonnes Standard Equipment Anti Scratch Roller System -Z-Axis Sensor NC Autofocus Oscillator Specification Model Fanuc C - 2000C RF Discharge Excited Fast Axial Flow 2000W CO2:He2:N2=5:40:55 /-2% each vol 1.75 /-0.25 Kgf/cm² (at regulator) 10 l/hour NC Specification Model: Fanuc FS - 160i-L 9" Colour LCD RS232C INTERFACE Air Cooled, Floor Mounted COMPLETE WITH CHILLER EXTRACTOR TRANSFORMER

Condition: used, functionality: fully functional, mileage: 446,350 km, power: 346 kW (470.43 HP), first registration: 10/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment Comfort co-driver’s seat, air-sprung Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Spare wheel, in accordance with configuration for front axle tyres Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology Pgedpfx Agozp Eqqjxep MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed Tyres Information Front left - 9 mm Front right - 9 mm Rear left inner - 10 mm Rear left outer - 10 mm Rear right inner - 10 mm Rear right outer - 10 mm

Condition: used, functionality: fully functional, mileage: 459,318 km, power: 346 kW (470.43 HP), first registration: 10/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment Comfort co-driver’s seat, air-sprung Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Spare wheel, in accordance with configuration for front axle tyres Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed Tyres Information Front left - 5 mm Pgjdpozp Eqkofx Agxep Front right - 5 mm Rear left inner - 6 mm Rear left outer - 8 mm Rear right inner - 7 mm Rear right outer - 7 mm

Condition: used, functionality: fully functional, mileage: 136,636 km, power: 346 kW (470.43 HP), first registration: 08/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3 Pgedpszp Ebcofx Agxep Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment Co-driver's seat, not sprung, length and backrest adjustment Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.0 smart tachograph Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Spare wheel, in accordance with configuration for front axle tyres Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed Tyres Information Front left - 10 mm Front right - 10 mm Rear left inner - 5 mm Rear left outer - 8 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 462,113 km, power: 346 kW (470.43 HP), first registration: 09/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver's seat, air-sprung, with lumbar support and shoulder adjustment Co-driver's seat, not sprung, length and backrest adjustment Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Pedpfxozpx Sze Agxegp Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed Tyres Information Front left - 7 mm Front right - 9 mm Rear left inner - 14 mm Rear left outer - 14 mm Rear right inner - 14 mm Rear right outer - 14 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Pgjdpfsw U Tlzsx Agxjp Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: used, mileage: 109,000 km, power: 88 kW (119.65 HP), first registration: 11/2019, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Pjdpfsy Tgvrjx Agxegp Please note!!! Sales are preferably made to commercial businesses. Internal ID number: [3348] ----Optional extras: * 12–64 months warranty (valid throughout the EU) * New inspection * New TÜV (German vehicle inspection) & emissions test * Nationwide delivery * Financing possible, even without a down payment * Trailer hitch/rear-view camera can be retrofitted upon request * Spring offer: Upon request and for an additional charge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * First owner * Accident-free * German vehicle * Regularly maintained * Ready for immediate use * Euro 6 standard * Air conditioning * Partition wall * Rear-view camera Special features: Airbag for passenger side, audio system: radio with Bluetooth and Plug & Music, visibility package, mobile office package 1, full wheel covers Other features: Airbag for driver side, anti-slip regulation (ASR), exterior mirrors electrically adjustable and heated, battery 85 Ah, on-board computer, rev counter, automatic headlight activation, rear wing doors without glazing, interior filter: pollen filter, body/structure: standard van, fuel tank: 80 liters, steering column (steering wheel) adjustable, engine 1.6 liters - 88 kW dCi diesel, rear fog light, wheelbase 3098 mm, tire repair kit, low emissions according to Euro 6 emission standard, sliding door cargo/passenger compartment on the right, seat cover/upholstery: fabric, seats in the driver's cab: driver's seat comfort, 3-way adjustable, daytime running lights, lashing eyes in the cargo area on the side, lashing eyes in the cargo area floor, pre-wiring for electrical superstructure, heat protection glazing ----Do you want to lease or finance? We offer attractive deals – even without a down payment! Please contact us. Contact: Telephone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 5,600 h, load capacity: 8,000 kg, fuel type: diesel, mast type: triplex, drive type: Diesel, Diesel forklift Mast type: Triplex Pgodpfxszn Dcio Agxsp Condition: Ready for operation and fully functional Technical condition: good 3-valve system, rear work light, front work light, heater, compliant with German Road Traffic Licensing Regulations (STVZO), full cabin.

Condition: good (used), Year of construction: 2006, cutting diameter 335 mm capacity 90 degrees: flat 500 x 335 mm saw band length 4400 x 34 x 1.1 mm speed 15.0 - 150 m/min work height max. 750 mm workpiece weight 250 kg/m coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. 1800 kg range L-W-H 2000 x 2200 x 1900 mm current list price: approx. 45.000 euros Special price available upon request Pgsdpfjzn Ahqsx Agxep Features: - MEBA - Fully automatic "two-column linear guide system" * Fully automatic machine for 90° cuts only - Automatic material feed - Continuously variable lowering speed 0â??300 mm/min - Band saw speed controlled by frequency-regulated AC drive (15â??150 m/min) - Automatic cutting pressure and feed monitoring - Hydraulic full-stroke material clamping - Automatic movement of the clamping blocks - Operatorâ??s manual

Condition: used, mileage: 260,000 km, power: 80 kW (108.77 HP), first registration: 02/2015, fuel type: diesel, overall weight: 3,500 kg, color: green, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,000 mm, loading space length: 3,300 mm, Equipment: ABS, central locking, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Please note!!! We prefer to sell to businesses. REVERSE GEAR IS DIFFICULT TO ENGAGE!!! VEHICLE DOES NOT HAVE A VALID INSPECTION CERTIFICATE!!! Internal ID number: [3097] ----Optional extras: * Nationwide delivery * Financing available, even without a down payment ----Vehicle highlights: * Euro 5 standard * Regularly maintained * Service booklet available * Second owner Podpfx Agezpdfyexjgp * Immediately ready for use * Special equipment: Long wheelbase, trailer coupling, storage compartments: luggage net on the rear tailgate, audio system RSD 4000 (speakers in the front), exterior mirrors electrically adjustable and heated, entry handle on the rear pillar on the left side, suspension: reinforced rear shock absorbers, windshield with band filter at the top, heated rear window, load compartment partition with window, spare wheel in driving condition, reversing camera, seats in the driver's cab: suspension seat, driver's side, trim in the loading/passenger compartment: hard fiber, halfway up, auxiliary heater (air) * Additional equipment: Storage compartments: shallow tray/compartment above the windshield, airbag on the driver's side, anti-slip regulation (ASR), entry handle on the rear pillar on the right side, driver assistance system: brake assistant (HBA), body/structure: standard van, body variant: normal roof, fuel tank: 75 liters, model update, engine 2.0 liters - 80 kW TDI, parking light switch, wheelbase 3665 mm, low emissions according to Euro 5 exhaust standard, sliding door for the loading/passenger compartment on the right, seat cover/upholstery: fabric, stabilizer in the front, steel rims 6.5x16, permissible total weight 3.50 t, additional brake light ----Would you like to lease or finance? We offer attractive deals – financing is possible even without a down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 am - 6:00 pm Sat: 9:00 am - 2:00 pm ----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sale are subject to change. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. We prefer to sell vehicles with a mileage of more than 50,000 km or older than 3 years to our business customers.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 148 kW (201.22 HP), filling opening width: 1,200 mm, filling opening length: 6,000 mm, number of blades: 150, rotational speed (max.): 80 rpm, rotor diameter: 390 mm, rotor width: 1,200 mm, Genox J1200 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 148kW combined shaft motor power (4 x 37kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 80rpm shaft speed. Pgodpfozh Eu Hjx Agxsp Four 1200mm wide x 390mm diameter rotors with 150 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. We also manufacture an 800mm version of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 258.5 kW (351.46 HP), filling opening width: 2,000 mm, filling opening length: 7,000 mm, number of blades: 350, rotational speed (max.): 50 rpm, rotor diameter: 635 mm, rotor width: 2,000 mm, Genox J2000 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 240kW combined shaft motor power (75Kw + 3x55kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 50rpm shaft speed. Four 2,000mm wide x 635mm diameter rotors with 350 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Pjdpfx Agezh Euyjxogp Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. We also manufacture a 800mm & 1,200mm versions of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: used, functionality: fully functional, mileage: 332,331 km, power: 353 kW (479.95 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with mid-height roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque, Euro 6e. MAN TipMatic Efficiency Plus driving program, without kickdown function Advanced Emergency Brake Assist (EBA). Adaptive cruise control - ACC Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Comfort co-driver’s seat, air-sprun. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Pedpfszmf Rrjx Agxjgp Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Multi-function steering wheel, adjustable height and angle. Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2" fifth-wheel coupling. Main wheelbase, 3900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Maximum speed limiter, 89 km/h, tolerance +1 km/h, electronic, engine speed regulation. Technology MMT infotainment system, Advanced Mid. MAN TeleMatics. Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed. Tyres Information Front left - 12 mm Front right - 12 mm Rear left inner - 6 mm Rear left outer - 8 mm Rear right inner - 6 mm Rear right outer - 9 mm

Condition: ready for operation (used), Year of construction: 2007, clamping force: 1,000 kN, This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical main movements by servo drives: dosing, injection, mold open/close, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal 400 injection unit • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing assembly D25 mm, high wear/corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heater band (320/00) (Pos 060/25) • Heater band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mold height adjustment • Prepared for mounting a linear robot on the fixed platen • Mold protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blow unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, electrical cabinet, interfaces: • Selogica control Pgodex D Hgvepfx Agxep • Software packages (Pos 555/01–555/07): Extended mechanical cycle controls; Extended movements; Production control; Optimization/Operator assistance; Quality assurance control; Documentation • Temperature-regulated electrical cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mold temperature measurement zones (Pos 469/12) • Additional heater band for nozzle (Pos 468/01) • Interface for HB-Therm mold temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for color dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/bad parts (Pos 375/00)

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Pgodpfsw Rn Eujx Agxjp Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: used, This listing is for the Binder BF115 UL Incubator / Oven The unit is in full working condition and is ready for immediate use BINDER BF 115 UL – Forced Convection Incubator The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Power Supply 120 V, 12.5 A fuse (NB At this time we also have in stock 230 V See BF115) Noise Level 43 dB(A) typical Weight ~54 kg Pjdexhfz Hepfx Agxsgp Shelves 2 chrome-plated shelves (up to 5 possible) Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: used, mileage: 824,000 km, power: 355 kW (482.67 HP), first registration: 09/2018, fuel type: diesel, overall weight: 19,500 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Additional information: * Payload: 11264 kg * Height: 3950 mm * Width: 2550 mm * Length: 6160 mm * Type | First axle: Hankook R * Tire size | First axle: 315/70 R22.5 * Tire tread depth inner left | First axle: 20% * Tire tread depth inner right | First axle: 20% * Maximum axle load | First axle: 8000 kg * Type | Second axle: Hankook * Tire size | Second axle: 315/70 R22.5 * Tire tread depth outer left | Second axle: 40% * Tire tread depth inner left | Second axle: 40% * Tire tread depth outer right | Second axle: 40% * Tire tread depth inner right | Second axle: 40% * Maximum axle load | Second axle: 11500 kg * Wheelbase: 380 cm * Cabin: Yes * Position | First axle: Front * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Parabolic springs * Steering | First axle: Yes * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Reduction | Second axle: Single reduction * Twin tires | Second axle: Yes * Driven | Second axle: Yes * Differential lock | Second axle: Yes Additional features: Psdpfx Agsy Ea U Ssxogp * 2-pedal control * Aluminum fuel tank * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Differential lock * Double fuel tank * Electric windows * Electrically adjustable exterior mirrors * Electronic Braking System (EBS) * ESP * Cruise control * Homepage * Air conditioning * Refrigerator * Air suspension * Fog lights * Parabolic suspension * Particle filter * Radio/CD player * Disc brakes * Sunroof * SemCollection * Spoiler * Auxiliary heater Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | We kindly ask you to inquire in advance about the costs and procedures applicable in your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.