Used Punching Press Darr W2/320 Tons for sale (19,369)

Year of construction: 2024, condition: new, AD-S 40400 ABKANTPRESSEBending force / Bending force ton400Bending length / Bending length mm :4050Distance between columns :3400Y rapid speed / Express speed mm / sec: 100Y working speed / Working speed mm / sec: 8Y return speed / Return speed mm / sec: 80Crowning / Crowning -: Mot.Daylight / Installation height tool passage and penetration depth of your press brake mm: 630Table width / Table width mm: 300Table height / Table height mm: 1040Stroke / Stroke mm: 365Throat depth / Projection mm: 510Support arms / Support arms: 2 piecesBack gauge finger blocks / The backgauge is standard with two finger blocks amount: 2 piecesSpeed of travel in X-axis / Pressing force and speed of your press brake. X - Axle size / sec: 350Travel in X-axis / x-axis Travel directionmm: 750Speed of R-axis(max.) Speed R axis max. mm / sec: 300Travel in R-axis / R axis Travel directionmm: 250Motor power / Motor power kW: 37Oiltank capacity / Oil tank capacity lt: 450Length / Length mm: 5750Width / Widthmm: 2110Height / Heightmm: 3540Weight approx. / Weight approx.kg: 27760X=650mm X,R,Z1,Z2, /AL)CE with manual F. Akas ll M-FPSC-B-C (SAFTY PLC)Upper tool DurmaLower tool DurmaCentral control motor Price plus transport and commissioningWe look forward to hearing from you. Ledpfod Rlk Hox Ahbshg

Year of construction: 2024, condition: new, Make: DURMA Type: AD-R 40400 Year of construction: NEW bending length: 4050 mm passage between the stands: 3400 mm Stroke: 365mm Installation height: 630 mm Throat: 510mm table height: 1050mm table width: 154mm Y high-speed: 140 mm/sec. Y working speed: 8mm/sec. Y retraction speed: 120mm/sec. X-axis working speed: 250mm/sec. R axes travel: 250 Engine power: 37 length: 5750 mm width: 2110mm height: 3540mm Weight: approx. 25000 kg Standard equipment Control: CNC Cybelec ModEva 19T CNC controlled motor-driven crowning European tool clamping system / or on customer request Durma clamping system Extended equipment: Safety system CE standard for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Controlled axes Backgauge: X1,X2,R1,R2,Z1,Z2 Control: DELEM DA-66T Lhsdpfx Ahed Hy Husbeg Delem 66T - 69T or Durma control is selectable DAM - Durma angle measuring system Hydraulic top tool clamping Wila NSCL-I-HC/UPB - PRO - 180 t/m Hydraulic bottom tool clamping Wila NSCR-I-HC-CNC/UPB - PRO Powerpack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation program AP3 & AP4 Bending aid 750mm to 1500 mm selectable Parking area for support arms (1000mm) TANDEM preparation Laser bending line Oil heating Central lubrication manual or motorized Air conditioning for switch cabinet Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request

Year of construction: 2024, condition: new, SPECIAL ACTION: Folding press AD-S 1260 length/width/height: 2300mm/1550mm/2850mm Weight: 47000 kg Bending force: 60 tons bending length: 1250 mm Passage between stands: 1050 mm Stroke:160mm Installation height: 530 mm Throat: 450 mm table height: 900 mm table width: 104 mm Y High speed: 200 mm/sec. Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. lower tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motorized crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guidance along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Lhedpfx Aed R Dhpohbeg Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information upon request.

Year of construction: 2024, condition: new, YOU BUY DIRECTLY FROM THE MANUFACTURER Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC DT 15 Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional equipment CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement system Quick clamping system Hydraulic and pneumatic tool clamping system Upper and lower tool Lower tool positioning system Parking area Central lubrication system Oil cooler Additional stop finger and additional movable support arms Lhedofirwmopfx Ahbsg Special packaging for overseas transports _____ With over 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced manufacturing facilities

Year of construction: 2024, condition: new, Länge/Breite/Höhe: 3200mm/1550mm/2750mm Weight: 3550 kg Bending force: 60 tons Bending length: 2050 mm Passage between stands: 1700 mm stroke: 265mm Installation height: 530 mm Projection: 410 mm table height: 900 mm table width: 104 mm Lhodpfx Ahofgz U Sobog Y Fast speed: 200 mm/sec. Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. bottom tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motor-driven crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guide along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Year of construction: 2024, condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional equipment Control unit - ModEva Premium , 69T and 66T CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes Lhedpfjfiryfjx Ahbsg X1, X2 Axes R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement system Quick clamping system Hydraulic and pneumatic tool clamping system Upper and lower tool Lower tool positioning system Parking area Central lubrication system Oil cooler Additional stop finger and additional movable support arms Special packaging for overseas transports

Year of construction: 2024, condition: new, Axes : Y1, Y2, X, R Control : Delem 66 T or 69 T selectable Lhedpfofin Hcsx Ahbog CE Norm with manual Fiessler AKAS II M -FPSC-B-C + safety cover & switch Durma upper tool Durma lower tool CNC controlled motorized crowning Throat standard 510 mm or selectable 750mm ,1000mm Backgauge: motorized & linear guide & ball roller system Backgauge finger height adjustable Backgauge Motor: AC type sliding support arms with linear guidance along the entire length Technical data on request

Condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Lhsdpfx Ajfiqa Rjhbjg Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Optional extras: Software D-BEND for 3D bending simulation and alignment R axis CNC (X = 650mm), X, R (double guide, aluminium) Upper dies, CE Lower dies, CE Lower dies, DURMA company Fast die locking system CNC-controlled crowning, with motor Backgauge (1000 mm) - Rear guard with light barrier Oil cooler Additional stop finger and additional front support system Sheets, sliding Special Overseas Packaging 8 meter press brake 800 tons. With more than 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA Maschi

Condition: used, Single-column hydraulic press MAE type S63SZ SO Lhjdpfodzp Trsx Ahbeg . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements Lhjdpei Db Ibjfx Ahbeg EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 Lhsdpsul S Eajfx Ahbsg CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamps Metal table Used exclusively in single-shift operation Includes tools from WILSON TOOL 19526

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm Lodpfoyrhyusx Ahbshg daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3, up to Ø 32.5 mm Quick-change device for punches 2 and 5 up to Ø 31.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: good (used), Year of construction: 1978, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERL135B -Pressure capacity: 135 tons -Coupling: pneumatic -Drive: 11 kW -Stroke: adjustable 20 - 120 mm -Table size: 670 x 1050 mm -Table cutout: 200 x 325 mm -Projection: 360 mm -Punch holder: Ø 50 mm -Insertion height 445 mm Lhsdpfxoyvuq Ns Ahbeg -Dimensions: 2530/1200/H2410 mm -Weight: 8008 kg

Condition: used, throat 750 mm punch diameter max. 75 mm max. sheet metal thickness 4 mm weight of the machine ca. 250 kg dimensions of machine L x W x H 1,41 x 0,75 x 1,47 m max. punch cap. in steel ø 75 in 2,0 mm, in aluminium ø 75 in 3,2 mm resp. ø 55 in 4,0 mm Lsdpfotqqp Sex Ahbehg

Condition: used, Year of construction: 1984, Punch power 400 kN table surface area ca. 1250 x 700 mm throat 500 mm hole punching press: capacity (dia. x thick.) 100 x 3 mm hole punching press: capacity (dia. x thick.) 75 x 4 mm hole punching press: capacity (dia. x thick.) 30 x 10 mm x-travel 700 mm y-travel 470 mm total power requirement 4 kVA weight of the machine ca. 2 t Lodpovb I Imsfx Ahbjhg dimensions of machine L x W x H 1,50 x 1,72 x 2,00 m Accessories: tool cabinet with various punches and dies

Condition: used, Year of construction: 1987, press brake Lhodpfxey Tzg Es Ahbjg

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: Allgaier, manual spindle press -Pressure capacity: approx. 20 tons -Insertion height: 345 mm -Column clearance: 300 mm -Table width: 300 mm / Bore Ø 60 mm -Spindle mount: Ø 40 mm Lodeyxda Sjpfx Ahbehg -Dimensions: Ø 1420 x 1780 mm -Weight: 277 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, punching force: 55 t, throat depth: 500 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, overall weight: 1,200 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,800 mm, power: 5.5 kW (7.48 HP), mount diameter: 40 mm, Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Motor power 5 kW Ledpfx Ajy T N Uwohbehg Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg

Condition: excellent (used), Year of construction: 2010, Helmerding Press Type: KDH 315/2100/2 Pressing force: 3,150 kN Stroke height: 40–200 mm Strokes per minute: 20–100 min⁻¹ Ram adjustment: 120 mm Shut height: 500 mm Table size: 2,000 x 1,200 mm Ram surface: 2,000 x 1,100 mm Machine weight: 44,000 kg Helmerding Roller Feeder Type: EWH 800/150 Strip width: 100–800 mm Strip thickness: 0.5–6.0 mm Helmerding Straightening Machine Type: R-70/800/9-S Strip width: 100–800 mm Strip thickness: 0.5–5.0 mm Roll diameter: 70 mm Number of straightening rolls: 9 pcs Helmerding Decoiler Type: HE-4/800/MOT/HYD Strip width: 100–800 mm Max. coil weight: 4,000 kg Ljdpfey Tqahjx Ahbohg Coil inner diameter: 508 mm Coil outer diameter: 1,000–1,600 mm

Condition: excellent (used), Year of construction: 2007, AMADA LKI MP 300 LOAD UNLOAD AUTOMATION Lodpfx Aheyylqbebshg Year 2007 LKI MP 300M automatic sheet loader / manipulator with 3000mm x 1500mm sheet capacity.

Condition: excellent (used), Year of construction: 2007, Amada EM2510NT electric punch, 45 Station Turret with 4 Auto indexing units 2008 Year of manufacture Country of Manufacture: Japan Bridge Type 20 tonnes (196kN) Lsdpfxsyylm No Ahbshg High speed AC servo direct twin drive 1270 x 2500mm 1270 x 5000mm 3.2mm mild steel 150Kg max sheet weight mm 45 Stations Turret Turret Stations: 24 x A (Max. Dia. 12.7mm) 12 x B (Max. Dia. 31.7mm) 2 x C (Max. Dia. 50.8mm) 1 x D (Max. Dia. 88.9mm) Auto Indexing Stations 2 x B (Max Dia 31.7mm) 2 x C (Max. Dia. 50.8mm) 128 m/min

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 9557, punching force: 110 t, stroke rate (max.): 28 1/min, working height: 990 mm, overall weight: 3,400 kg, hole diameter: 40 mm, TECHNICAL DETAILS Punching force: 110 t Punching capacity: Ø 40 x 20 mm Notching: 750 Stroke rate: 28 strokes/min Working height: 990 mm MACHINE DETAILS Control: conventional Lhedey Iwwvopfx Ahbog Dimensions & Weight Space requirement (L x W x H): approx. 2,300 x 1,300 x 2,300 mm Machine weight: approx. 3,400 kg

Condition: excellent (used), Year of construction: 2002, Model .Amada. Vipros 368 King Stock number 01967 Year of manufacture 2002 Frame Construction ... Bridge Type Press Capacity ... 30 Tonnes (294 kN) Press Type ... High Speed Hydraulic Servo Ram Axis Traverse Distance ... 1525 x 2000 mm Workable Max. Sheet Size ... 1525 x 4000 mm (with auto repositioning) Max. Material Thickness ... 3.2 mm mild steel Max. Hole Dia. Max. Material ... . (shearing strength 36 kg/mm2) 82 mm dia Max. Material Weight ... 75 Kg Max. Material weight ( Max. Speed) ... 60 Kg Max. Hole Dia. ... 114.3 mm Number Of Stations ... 58 stations:24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 2 x 114.3 mm Axis Speed ... 113.0 m/min Hits Per Minute (2mm pitch) ... 860 H.P.M./3 mm stroke (8mm pitch) ... 560 H.P.M./3 mm stroke (25mm pitch) ... 460 H.P.M./3 mm stroke Turret Speed Bi-Directional ... 30 R.P.M. Punching Accuracy ... ± 0.1 mm (incl. 1 reposition) Ram Stoke Length (maximum) ... 40 mm Tool Lubrication ... Air Blow System Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 28 kVA 400V +/- 10% 50Hz Lhodpfjvn D Tfsx Ahbog Air Pressure Required ... 5.0 Kgf/cm2 Air Flow ... 250 1/min Cooling Water Flow ... Min 40 1/min. Machine Length ... 5025 mm Machine Width ... 4120 mm Machine Height ... 2630 mm (3190 mm to mirror) Machine Weight ... 18000 Kg

Condition: excellent (used), Year of construction: 2016, Mossini press Press force: 6,300 kN Stroke rate: 25-53 spm Stroke length: 400 mm Slide adjustment: 500 mm Installation height: 1,200 mm Table size: 3,200 x 1,200 mm Lsdpfx Aey Rtfnehbehg Millutensil coil line Strip width up to 1,300 mm Strip thickness: 0.5–5.0 mm Coil carrying capacity: 12,000 kg

Condition: excellent (used), Year of construction: 2013, Mossini press Press force: 10,000 kN Ledpfey Rrwpox Ahbshg Stroke rate: 20–55 rpm Stroke height: 350 mm Ram adjustment: 300 mm Shut height: 1,450 mm Table size: 4,500 x 2,500 mm 2 sliding tables Millutensil coil line Strip width: 250–1,850 mm Strip thickness: 0.5–4.0 mm Coil load capacity: 24,000 kg