Used Potentiometer for sale (176)

Condition: like new (used), power: 15.5 kW (21.07 HP), operation weight: 2,540 kg, Year of construction: 2023, operating hours: 605 h, Equipment: additional headlights, adjustable boom, cabin, gripper hydraulics, hammer hydraulics, hydraulics, Operating weight: 2,540 kg, Yanmar Stage V - Tier 4 Final diesel engine, 15.5 kW/21.1 hp - 1105cc, water-cooled, Hydr. system open center, hydraulic variable displacement pump, dozer blade, tiltable cab ROPS/TOPS/FOPS with heating, fan, loudspeaker, radio preparation and rear view mirrors right and left, Joysticks with electro-hydraulic and proportional commands for, tilt, Main control circuit AUX1: single/double action, double driving speed with "AUTO TWO SPEED", Dipper arm: 1,350 mm, W/H: 2,725 mm / 2,527 mm, Excavation depth: 2,725 mm, Butterfly brackets on the stick, rotating beacon, AUX 2 hydr. pre-equipment with low throughput, control with potentiometer on left control lever (deactivates swivel) with Powertilt PT03, Swivel angle 180° (2x90°) Lehnhoff HS03 hydraulic quick coupler, Lodpfx Amstrmudepeaa Load hook on Powertilt in AR right without backhoe bucket and ditching bucket

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. Lsdpjyzzh Esfx Ampsaa In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,553 h, number of axes: 3, total height: 3,000 mm, total width: 5,000 mm, spindle motor power: 9,000 W, product length (max.): 8,400 mm, spindle speed (max.): 24,000 rpm, This 3-axis Weeke Optimat BHC 550 was manufactured in 2003. It features a spacious table size of 4250 x 1300 mm and a powerful 9 kW main spindle with infinitely variable speeds from 1250 to 24000 rpm. The machine includes an 18-position tool changer and a drilling/milling unit with multiple configurations. If you are looking to get high-quality CNC wood machining capabilities, consider the Weeke Optimat BHC 550 machine we have for sale. Contact us for further details. • Table size: 4250 x 1300 mm • 8 consoles incl. lifting rail • Dual-circuit vacuum block suction Laodsyxrdrepfx Ampea • Vacuum connection for stencil operation • Y-stop rail for top layer overhang • Main spindle: HSK F63, liquid recirculation cooling • Max. tool diameter: 180 mm • Aggregate interface for main spindle, C-axis with torque transmission and 3-point support • Tool changers: 18-position (moving in X), 8-position (moving in Y) • Drilling/sawing/milling unit with ER25 • Drilling/milling unit, manually tiltable 90°, with ER25 • Drilling unit: horizontal in X: 4; horizontal in Y: 2; vertical: 19 • Groove saw in X direction, tool diameter 100 mm • Handheld terminal for machine control with potentiometer • Control/software: Windows XP, WoodWOP 5.0, network connection possible • 2004 new hard drive Additional equipment • Vacuum pump (included)

Condition: good (used), functionality: fully functional, Technical data: Centre height 110 mm Centre width 160 mm Spindle bore 23 mm Motor power 1.7 kW Speed can be set via potentiometer from approx. 100 - 2,300 rpm 3 pre-selected speeds or 3 switching levels . Scope of delivery, machine with: Operating modes: Manual + automatic Pneumatic clamping device Ljdpoy Egmhsfx Ampjaa Tilt tailstock with 2 sleeves for K 12 collets, with control switch for switching Hand lever cross support with 4 stops, consisting of cross and longitudinal support .

Condition: good (used), Table size 420 x 250 mm. Speeds: electronically controlled, stepless via potentiometer, 132 - 4500 rpm. Lsdpfxjyywn Eo Ampoaa

Condition: excellent (used), CATALOG NUMBER 7910 Lasdpfx Amjyquzcopja TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation Lasdpfjyz Rf Hjx Ampea - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), CATALOG NUMBER 7818 Laodeyyygdepfx Ampoa Technical data: - Max. working width: 1100mm - Max. working height: 180mm 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration – Top side: - Metal pressure roller - Unit - Metal pressure roller - Unit - Metal pressure roller – Bottom side: - 2 rubber sliding rollers - Feed belt - 2 rubber sliding rollers - Pneumatic belt oscillation - Electric table lifting - Sanding thickness potentiometer - 2 feed speeds - Feed motor: 0.80 kW - Main motor: 10kW - Operating pressure: 6–8 bar - Extraction port diameter: 2x155mm - Overall dimensions (LxWxH): 1670x1740x2040mm - Weight: 1200kg ADVANTAGES – Made in Italy – Sanding thickness potentiometer – 2 sanding units – Used sander, very good condition Net price: 25,900 PLN Net price: 6,160 EUR based on an exchange rate of 4.2 PLN/EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NO. 7967 TECHNICAL DATA - Maximum working width: 1100 mm Laedpey Ddp Defx Ampoa - Maximum working height: 170 mm 2 units: 1) Grooved metal roller for calibration 2) Grooved rubber roller + shoe + metal roller – Top side: - Rubber pressure roller - Unit (two units on one motor) 15 kW - Rubber pressure roller - Outfeed rubber roller - Belt cleaning by air blast – Bottom side: - 2 metal pressure rollers - Feed belt - 2 rubber pressure rollers - Pneumatic belt oscillation - Grinding thickness potentiometer - Electric and manual table lifting (for precise adjustment) - Pneumatic brake - 2 feed speed options - Working pressure: 6–8 bar - Extraction nozzle diameter: 2x140 mm - Overall dimensions (L/W/H): 1830x1670x1950 mm - Weight: 1160 kg ADVANTAGES – Italian manufacture – 2 sanding units – Not repainted – Used sander, perfect condition Net price: 77,900 PLN Net price: 18,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary with larger exchange rate fluctuations)

Year of construction: 2024, condition: used, For inquiries regarding the crawler, Mr. Herden is available to assist you (by phone). Seppi M. MAX 75 HP / 75 PS / Radio-controlled crawler vehicle / Recovery winch / Seppi M. MICROFORST rc 155 forestry mulcher / Seppi M. H 5 rc 175 mulcher / In stock & immediately available Price for crawler without attachments: €126,190.00 net / €150,166.10 gross Standard specification and features: Dimensions*: - Overall width, undercarriage retracted: 1,650 mm - Overall width, undercarriage extended: 2,450 mm - Depth: 2,600 mm - Height: 1,250 mm - Track length: 1,570 mm - Track width: 230 mm - Cross/longitudinal incline: 55° - Weight (without equipment): 2,200 kg Engine: - Perkins 4-cylinder diesel engine - Output: 55 kW / 75 HP - Torque: 270 Nm at 1,800 rpm - Displacement: 2,200 cc - Cooling with automatic reversing fan (automatic fan cleaning) Drive: Hydraulic system for attachments: - High-flow hydraulic circuit (closed circuit) for attachments (double-acting): - Capacity: 93 l/min max. at 2,750 rpm - Pressure: 380 bar Hydraulic system services: - Low-flow hydraulic circuit for attachments (double-acting): - Capacity: 15 l/min max. at 2,750 rpm - Pressure: 200 bar Vehicle hydraulic system: - Capacity: 154 l/min max. at 2,750 rpm - Max. pressure: 400 bar Undercarriage: - HIGH GRIP: Stability and traction on slopes up to 55° under optimal conditions - Hydraulic adjustment of vehicle width 800 mm (2x400 mm) Laedpfoyfrpgjx Ampja - AUTO TRACK TENSION: Active automatic track tensioning - Patented track derailment protection - Stability and traction thanks to robust tread and large track contact area Control: - Remote control with graphic display (machine vital data and tilt indicator) - Range: 150 m - Potentiometer for speed control with variable feed from 0 to 100% Lifting gear: - FLOAT: Lifting gear with float position (ground pressure control) Standard equipment: - Vehicle with roll bar - LED headlights - Internal components protected by heavy-duty steel covers - Skid plate to protect the engine and hydraulics - Color: anthracite RAL7021 | red RAL3020 OPT 573 Bio hydraulic oil OPT 221 Rear forestry protection with recovery winch Optional: SEPPI M. MICROFORST rc 155 – hydraulic forestry mulcher Price: €23,130.00 net / €27,524.70 gross Optional: SEPPI M. H5 rc 175 – hydraulic mulcher Price: €13,770.00 net / €16,386.30 gross We have a very large selection of various Seppi M. products in stock and immediately available! Mr. Herden (phone) will be glad to assist you. We are happy to provide you with a financing offer upon request. We are an official Seppi M. sales and service partner. We supply the complete Seppi M. product range! Subject to error and prior sale! Rental possible = Further information = New: Yes For more information, please contact Tobias Ebert.

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 200 mm, rotational speed (max.): 3,000 rpm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Ledpfeyrmzqex Ampsaa Haul-off Unit TECHNICAL DETAILS Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter 10-step helical potentiometer

Year of construction: 2023, condition: as good as new (ex-display), Technical data:- Load capacity: 1500kg- Own weight: 300kg- Insertable workpiece diameter: approx. 50 - 3000 mmm- Roll diameter: 250mm- Roll width 50mm - Rotation speed approx. 100 - 2,000 mm/min- Two-pedal foot switch potentiometer for stepless speed control Laodod Iuqljpfx Ampoa

Condition: new, Year of construction: 2023, Hydraulic height adjustable rotary tilt table Maximum load: 1.000kg Faceplate diameter: 850 mm Speed of face plate: 0,05- 1,0 rpm length / width: 1.800mm / 1.450mm Height faceplate horizontal: 800mm - 1.275mm height faceplate vertical: 625mm - 1.100mm Operating devices: 2-pedal foot switch/ turn LEFT/ RIGHT hand-held remote control: Turn LEFT/RIGHT/STOP, speed controller (potentiometer) for stepless speed control, pushbutton tilt FORWARD/BACK, pushbutton lift UP/DOWN Lajdpfjh T Dafex Ampja Operation at the control cabinet: Pushbutton "DEVICE ON Selector switch "MANUAL/FOOT OPERATION Main switch "ON/OFF

Year of construction: 2023, condition: as good as new (ex-display), Technical data:- Load capacity: 15000 kg- Own weight: 960kg- Insertable workpiece diameter: approx. 50 - 3200 mm- Roll diameter: 250mm- Roll width 240mm - Rotation speed approx. 100-2,000 mm/min- Two-pedal foot switch- Potentiometer for stepless speed control Laedped Iuqajfx Ampea

Year of construction: 2022, condition: new, Technical data: - load capacity: 10.000 kg - Own weight: 850kg - Insertable workpiece diameter: 50 - 3500 mm Lasdpfx Aofxw H Ajmpja - Roll diameter: 250mm - Roll width 160mm - turning speed approx. 100-2.000 mm/min - Two-pedal foot switch - Potentiometer for infinitely variable speed control

Year of construction: 2022, condition: new, Height adjustable rotary tilt table Load: 500kg Stroke: 1.015mm, height faceplate min. 345, max. tilt angle 120°. Face plate diameter: 800mm Lajdpfx Amjh Tfbzopja Welding current: 400A Torque face plate: 1.300Nm Total length: 2.365mm Height (housing): 1.030mm The rotary tilt table is controlled by pushbuttons on the machine housing with the following functions: - LIFT arm - Arm LOWERING - Potentiometer for the stepless SPEED- adjustment of the face plate For the control of the face plate a two-pedal foot switch is available with the functions: - face plate rotation RIGHT - face plate rotation LEFT

Year of construction: 2022, condition: new, Height adjustable L manipulator Load: 500kg Stroke: 640mm, height faceplate min. 480, max. 1.110mm Pivoting range: +/-185 face plate diameter: 800mm Welding current: 400A Lasdpfsh Td Thsx Ampja Torque face plate: 900Nm Torque swivel arm: 900Nm Total length: 2.495mm Height: 1.855mm Width: 900mm The rotary stand is controlled by a hand-held remote control with the following functions: - LIFT arm - arm LOWER - Arm swivel RIGHT - Arm give LEFT - Potentiometer for the stepless SPEED- adjustment of the faceplate For the control of the face plate a two-pedal foot switch is available with the functions: - face plate rotation RIGHT - face plate rotation LEFT

Year of construction: 2022, condition: new, - Load capacity rotating stand: 1.000 kg - Machine body: Sheet metal construction made of quality steel, - length/width 1.000mm x 1.180mm - height 2.220mm - Stroke face plate (vertical): 700-1.400mm - diameter of face plate: 600 mm - Chuck: M-WPS500 - Machine weight (DSH): 1,400 kg - Face plate speed: 0.1- 2 rpm Operation on the control cabinet: Selector switch: Turn foot switch or Button on the control cabinet Turn: LEFT/RIGHT Lift: UP/DOWN) Potentiometer for infinitely variable speed control Foot switch: Turn: LEFT/RIGHT Lajdpfx Amofxw Dcopea welding current transmission: 600A

Condition: good (used), Year of construction: 2019, Professional packaging machine from a renowned European manufacturer for adhesive tape widths up to 50 mm. Maximum carton dimensions approximately: width 525 mm x height 505 mm; length unlimited. This is a robust machine designed for the highest demands. - Double-sided sealing of cartons top and bottom with adhesive tape. - Transport speed up to approx. 20 m/min. - Various carton formats can be adjusted continuously in height and width via a quick-adjustment system (no hand crank required). - Working height adjustable from 635 to 950 mm. Special features/options: Lasdsyywazopfx Ampea - Delivery includes an infeed conveyor approx. 1 m in length and an outfeed conveyor approx. 1 m in length. The outfeed conveyor is equipped with a stop plate, which can be removed if needed. Both roller conveyors are adjustable in height and inclination. - The machine has an adjustable sealing device for carton flaps at the infeed. - Machine speed is adjustable via a potentiometer. The machine can be demonstrated under power.

Year of construction: 1994, condition: used, Max. saw blade diameter: 550 mm Manual swiveling with digital display Lasdpfx Amoynacyepsa Motor-driven axis for tilting the saw blade with digital display and speed setting via potentiometer Stepless saw blade feed Minimum quantity spray device Weight: approx. 1,000 kg

Condition: ready for operation (used), Year of construction: 1981, power: 45 kW (61.18 HP), cutting height (max.): 200 mm, shaft diameter: 65 mm, chain width: 340 mm, Double-shaft multiblade saw Manufacturer: Raimann Model: KD Chain width: 340 mm Ledjyhlubspfx Ampeaa Cutting height: 200 mm Saw motors: 2 x 45 kW Shaft diameter: 65 mm Electric height adjustment Transport chain with spikes Feed system modernised to stepless speed adjustment via potentiometer, approx. 0 to 40 m/min. Includes 3 saw sleeves with saw blades, some fitted with new saw blades.

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: Centre distance: 750 mm Centre height: 180 mm / (250 mm optional) Workpiece weight: 100 kg (between centres) – 250 kg (supported between centres) Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, stepless speed adjustment 30–450 rpm, swivel range 0–90° Tailstock: MT 4, quill stroke 45 mm, quill offset adjustment Quill force: 200–600 N manual, (up to 2500 N adjustable as option) Table swivel adjustment: 12.5 degrees Cross slide travel: 80 mm Rapid traverse distance: 50 mm Coarse adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW / (5.5 kW optional) Stepless speed setting of the grinding wheel via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Lodoiv Audopfx Ampoaa Hydraulic tank: 80 litres Machine weight: Net 3,500 kg Feed drive via DC motor Air-cushioned rapid adjustment of the grinding spindle head for fast and precise positioning. Separate drive for external and internal grinding spindles. Fully automatic operation, feed movement controlled via handwheel switch: rapid feed, rapid return, grinding operation, feed stop, mym-feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding zones Workpiece headstock with steplessly adjustable drive, with live and lockable spindle. Digital feed control with Siemens panel and Siemens PLC for plunge and traverse grinding, input for retraction, infeed values, feed rates, spark-out times, idle strokes, compatible with traditional Karstens infeed control, with colour Siemens touch panel. Scale in X and Z axis by HEIDENHAIN. Comparable with Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna.

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Lodpfx Amoh Rimmopjaa Manufacturer: Karstens Technical Data: Centre distance: 1100 mm Centre height: 180 mm / (250 mm optional) Workpiece weight: 100 kg between centres, 300 kg with support Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, infinitely variable speed from 30-450 rpm, swivel range 0 - 90° Tailstock: MT4, quill stroke 45 mm Quill force: 200-600 N manual, (up to 2500 N adjustable = optional) Table swivel: 10 degrees Infeed spindle travel: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW / (5.5 kW = option) Infinitely variable speed adjustment of grinding wheel via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Net machine weight: 3800 kg Infeed drive via DC motor Air cushion-supported rapid adjustable grinding spindle stock for fast and safe positioning to grinding location. Separate drive for spindles for external and internal grinding. Fully automatic operating sequence, infeed movement via rotary dial switch: Rapid approach, rapid return, grinding operation, infeed stop, mym-infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding zones Workpiece headstock with infinitely variable drive for both live and lockable spindle operation. New digital infeed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, inputs for retraction, infeed amounts, feed rates, spark-out times, dwell strokes; compatible with the old Karstens infeed control; with colour Siemens touch panel. Similar to Weiss/ EMAG/ GP cylindrical grinders/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller / Fortuna

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: Laodpjiv Au Ejfx Ampoa Centre distance: 1100 mm Centre height: 180 mm (250 mm optional) Workpiece weight: 100 kg between centres (unsupported), 300 kg between centres Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, infinitely variable speed control 30–450 rpm, swivelling range 0–90° Tailstock: MT4, quill stroke 45 mm Quill force: 200–600 N manually, (up to 2500 N adjustable, option) Table swivel: 10° Cross slide travel: 80 mm Rapid traverse: 50 mm Coarse adjustment (air cushion): 280 mm External grinding spindle motor: 4 kW (5.5 kW optional) Infinitely variable grinding wheel speed adjustment via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Net machine weight: 3,800 kg Infeed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle head for fast and safe positioning to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operation, infeed movements controlled via rotary selector switch: rapid advance, rapid return, grinding mode, infeed stop, micrometre infeed. Automatic longitudinal grinding cycle Central coolant supply to all grinding points Workpiece headstock with infinitely variable drive for rotating and lockable spindle. New digital infeed control with Siemens panel and Siemens PLC for traverse and plunge grinding; input for retraction, infeed amounts, feed rates, spark-out times, idle strokes; compatible with the original Karstens infeed control; with coloured Siemens touchscreen; HEIDENHAIN scales in X and Z axes. Comparable to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: new, Year of construction: 2023, machine/vehicle number: PRJ065958, ALZMETALL bench drilling machine drilling capacity in steel 16mm Short spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-table min./max. 75/357mm, machine table height adjustment via hand crank, machine table base plate, usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min. / max. 437/437mm, feed by hand, machine height without options: 825mm, net weight: 83 kg. - Speed infinitely variable 100-2000 rpm Standard equipment: Ljdpelubw Iofx Ampeaa 5" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in the display, machine status indicators and warnings in the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, Connector plug ready mounted, Cable length 2m, Three separate buttons for clockwise - anticlockwise - stop, spindle stop by brake function, spindle protection with electrical fuse, main switch lockable, mushroom pushbutton (latching) for EMERGENCY STOP, speed adjustment infinitely variable by means of potentiometer, protection class IP54, spindle protection with electrical fuse, paint: DD structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein