Used Pinacho Smart Turn 180/42 1000 for sale (23,791)

Condition: excellent (used), Here we offer a Vötsch climatic test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber internal dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Chamber volume: 990 liters Port openings: Ø 125 mm, Ø 50 mm Temperature test specifications: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Gjdpsygutwsfx Aaxebl Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 watts Climatic test specifications: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1% to ± 3% r.h. Max. heat compensation: 500 W Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your security as a buyer, please note the following information! The following points are checked and carried out on all our chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. If needed, fresh filling with legally compliant refrigerant 3. Leak check with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Subject to prior sale, changes and errors in technical data and specifications reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" Gbsdpfx Aeyguh Ijaxsl All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: new, Bernardo Universal Lathe Smart 410 x 1000 Pro Technical Specifications Distance between centers: 1000 mm Center height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Spindle speed range (16): 45 – 1800 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MK 4 Motor power: 3.0 / 4.5 kW Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Weight approx.: 1220 kg Gedsxl Dx Eopfx Aaxsbl Features • Prism bed made of grey cast iron, induction-hardened and precision-ground • Electromechanical foot brake for reducing non-productive times • Central, user-friendly control for feeds and threading with leadscrew and feed rod • Modern main spindle bearings with precision angular contact ball bearings • Large-dimensioned, hardened and precision-ground gears • Hardened and ground gears and shafts, including in the feed gear box • Speed and feed settings are straightforward, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge allows machining of large-diameter workpieces Scope of Delivery • Prism bed made of grey cast iron, induction-hardened and precision-ground • Electromechanical foot brake for reducing non-productive times • Central, user-friendly control for feeds and threading with leadscrew and feed rod • Modern main spindle bearings with precision angular contact ball bearings • Large-dimensioned, hardened and precision-ground gears • Hardened and ground gears and shafts, including in the feed gear box • Speed and feed settings are straightforward, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge allows machining of large-diameter workpieces

Condition: new, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 steps: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2090 x 1050 x 1600 mm Weight approx. 1145 kg Features • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, with set spindle speed displayed digitally • Prism bed made of grey cast iron, induction-hardened and precision ground • Central, user-friendly controls for feeds and threading with leadscrew and feed shaft • Modern main spindle bearing arrangement with precision angular contact ball bearings • Standard with frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including those in the feed gearbox • Simple, smooth, and precise adjustment of speed and feed settings • Sliding tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout system ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity dia. 135 mm Godpoxl Tarjfx Aaxsbl • Travelling steady rest – max. capacity dia. 65 mm • Foot pedal with brake function, CE compliant • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Indexing stop with fine adjustment • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard (rear) • Operating tools

Condition: new, turning length 1000 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 250 mm spindle taper DIN 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1220 kg range L-W-H 2070 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm Gsdpfxsxaavvs Aaxobl - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Shell Tellus 46 - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip back wall - Operating tools - Operating instructions

Condition: new, turning length 1000 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 30-550 / 550-3000 U/min bed width 250 mm spindle taper 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 5.5 kW weight of the machine ca. 1145 kg. range L-W-H 2090 x 1050 x 1600 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Foot pedal with brake function according to CE - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED machine light Godjxaakyepfx Aaxsbl - Change gears - Reducing sleeve - 2x centering tips - Chip back wall - Operating tool

Condition: new, turning length 1000 mm turning diameter 360 mm turning dia. in gap 480 mm spindle bore 51,0 mm turning speeds 70 - 2000 U/min bed width 185 mm Gbodpfxexaawao Aaxel spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 110 mm total power requirement 1,5 kW weight of the machine ca. 540 kg. range L-W-H 1920 x 750 x 1600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame - Operating tools

Condition: used, Power supply, converter, converter, power supply unit, Smart-UPS Gedpjffqv Dsfx Aaxobl -APC: Smart-UPS 1000 -Uninterruptible power supply -Connection: 220-240 V/50/60 Hz -Price: per piece -Number: 4 pieces -Dimensions: 435/170/H215 mm -Weight: 20 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 265864, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, feed rate X-axis: 30 m/min, feed rate Z-axis: 33 m/min, torque: 233 Nm, distance table center to spindle nose: 687 mm, Equipment: documentation/manual, Mazatrol Smart Control. Spindle speed 5000 rpm. X/Z travel 195mm/560mm. Gbedpfx Aaevfm H Aoxjl Fitted with 215mm diameter. 3 jaw-powered chuck 12-station turret. Tailstock. Tool setter. Part catcher.

Condition: excellent (used), White Type: WT3-1000/40 Weiss Temperature test chamber With S!MCON / 32 control unit Water-cooled Touch panel" control unit All control and operating commands can be triggered by simply touching the function icons on the all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 990 liters Test chamber dimensions: Height 950 mm, width 1100 mm, depth 950 mm External dimensions: Height 2000 mm, width 1415 mm, depth 2105 mm Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation in time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 4500 W Data for operation: Test room lighting Halogen bulb 2x 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 22.0 A Rated power 11.5 kW On-site fuse 32 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 56 dB(A) Refrigerant: R-404A Weight: 840 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant Gbjdpfxethhw Ao Aaxol 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control Air-cooled (refrigerant converted to R-452A) Gbedpfx Asrak S Djaxel Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the function icons. all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Data for operation: Test room lighting Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A Rated power 7.8 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1m from the front. 1m height 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss climate test chamber. Weiss climate test chamber water-cooled (refrigerant converted to R-452A) Temperature test Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, width 580 mm, depth 765 mm External dimensions: Height 1775 mm, width 870 mm, depth 1600 mm Minimum temperature -42°C Maximum temperature +180°C Temperature change rate, cooling 4 K/min Temperature change rate, heating 3.2 K/min Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ±1.5 K Climate test: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r.h. Temperature deviation, temporal ± 0.1 to ± 0.3 K Temperature homogeneity, spatial ± 0.5 to ±1 K Humidity deviation, temporal ± 1 to ± 3 % r.h. Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4.1 kW Rated current: 14 A Refrigerant: R-452A Type: WK3-340/40 Weight Approx. 515 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Gjdpfx Aeq U Sdceaxobl We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control Water-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the function icons. all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 335 liters Test chamber dimensions: Height 750 mm, width 580 mm, depth 765 mm External dimensions: Height 1775 mm, width 870 mm, depth 1600 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate Heating: 3.2 K/min Cooling: 4.0 K/min Heat compensation max. 2300 W Gjdpfsrbigfex Aaxsbl Data for operation: Test room lighting Halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Rated power 4.1 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 56 dB(A) Refrigerant: R-452A Weight: 515 kg Type: WT3-340/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm Gbsdpfsu Ixwijx Aaxjl turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: R6A N3602, turning length: 520 mm, turning diameter: 360 mm, overall weight: 3,800 kg, TECHNICAL DETAILS Turning diameter: 360 mm Turning length: 520 mm MACHINE DETAILS Total power requirement: 20 kW Dimensions & Weight Required space: 3 x 2 x 2 m Machine weight: 3.8 t Gedpfxsxvrrus Aaxsbl

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: R6AN3701, turning length: 520 mm, turning diameter: 360 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 6,300 rpm, total height: 1,872 mm, total length: 1,941 mm, total width: 3,074 mm, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS Working Area Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Slide travel X/Z: 210 / 610 mm Gbsdpfx Aowxw H Ssaxol Distance main spindle – tailstock: 805 mm Max. workpiece size with tailstock: Ø160 x 520 mm Main Spindle Spindle interface according to DIN 55026: A5 Spindle external diameter at front bearing: Ø80 mm Through-hole hydraulic chuck with drawbar for workpieces up to: Ø160 mm Hollow clamping cylinder with drawtube max. passage: Ø45.5 mm Max. chuck size (spindle size Ø45): Ø160 mm Tailstock Internal taper: MT4 Tailstock travel: 500 mm Max. tailstock force (hydraulically controlled): 8,000 N Feed Drives Feed force X/Z: 5,000 / 7,000 N Rapid traverse speed X/Z: 24 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning accuracy range X/Z/Z₂: 3 / 5 / 4 µm Main Spindle Drive AC motor power 100/40% duty cycle: 9 / 13 kW Speed range (stepless): 0-6,300 rpm Max. torque: 89 Nm MACHINE DETAILS Dimensions (W x D x H): 3074 mm x 1941 mm x 1872 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: ILL, Carl Stahl Rotomax load turning device Godpexwd Iqofx Aaxebl Load turner Payload capacity: 1 to 1000 kg Connection: 400V, 16A Item location: 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or collection by appointment

Condition: used, Year of construction: 2004, machine/vehicle number: 49615, Lg.no. 24100 Technical data approx: Gbsdpfjtp Ipujx Aaxol - largest turning diameter - over bed 560 mm - over cross slide 315 mm - Center width 1500 mm - Travel distance cross slide approx. 300 mm - Spindle bore 80 mm - Taper of the tailstock quill MK 4 - Travel of the tailstock quill 150 mm - Spindle speeds 1 - 2500 rpm - Rapid traverse X / Y - with: - NC control FANUC - 2 E. handwheels for manual turning - Tailstock - Coolant device - Drive 400 V / 7.5 kW - Space requirement approx. W 3250 x H 1750 x D 1500 mm - Weight approx. 3800 kg

Condition: new, TC 180 x 1000 V Tip width: 1000 mm Center height: 178 mm Circumferential diameter over bed: Ø 356 mm Bed width: 190 mm Cross slide travel: 160 mm Travel distance top slide: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. Chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2500 1/min Mechanical feed stages: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Face feeds X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 Gg/inch Thread module: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner taper of quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Dimensions, approx.: 1880 x 880 x 1390 mm Features: - Acceptance certificate according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision bearing-mounted spindle, hardened and ground gears for long-lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking device (V models) - Torsion-resistant machine beds made of MEEHANITE quality casting, stress-free annealed and multi-ribbed for extremely smooth running - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse button for main spindle - CE / IEC as well as German documentation and German service Basic equipment (standard accessories): - Machine stand with splash guard rear panel - 3-jaw lathe chuck - 4-fold steel holder - Foot pedal with mech. brake device - Coolant device - Chuck guard and spindle cover in accordance with European safety standards CE - 1 Fixed center point for main spindle - 1 Fixed center point MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle Operating tool Available options for this lathe: - 3-axis digital readout Gedpfxjir Imyj Aaxobl - Quick-change holder system Multifix also available as gearbox variants

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025-09/2404095, turning diameter over cross slide: 224 mm, spindle bore: 51 mm, center height: 180 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,680 mm, total height: 1,400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 224 mm Swing diameter without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. turning tool cross section: 16x16 mm Chuck mounting: D1 - 4 Spindle mounting (lathe spindle): MT 6 Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of speed ranges: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Cross feeds: (32) 0.014 - 0.380 mm/rev Metric thread pitch: (26) 0.4 - 7 mm Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Quill mounting: MT 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Electrical connection: 400/50 V/Hz Total length: 1680 mm Total height: 1400 mm Weight: 520 kg Standard accessories: - RÖHM 3-jaw chuck Ø 200 mm - 4-jaw faceplate chuck Ø 200 mm - Face plate Ø 320 mm - 2 fixed centre points - Live centre MT 3 - Travelling steady - Fixed steady - Quick-change tool post set ME - Thread dial and change gear set - Halogen machine lamp Gsdpfjxykafox Aaxjbl - Emergency stop button / No-voltage release - Chuck guard with safety switch - Machine base / chip tray / splash guard - Tool kit / operating manual / CE

Condition: excellent (used), Year of construction: 2014, operating hours: 2,315 h, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 400 mm, turning diameter: 320 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 50,000 rpm, spindle bore: 75 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 33 m/min, rapid traverse Z-axis: 33 m/min, total height: 1,700 mm, total length: 2,630 mm, chuck outer diameter: 210 mm, total width: 1,700 mm, bar diameter (max.): 66 mm, quill stroke: 500 mm, swing diameter over cross slide: 660 mm, spindle nose: 6, overall weight: 4,500 kg, MAZAK QUICK TURN 200 Smart Operating hours: Automatic cycle: 2,330 hours Condition: Very good condition, regularly serviced and meticulously maintained! Capacity & Working Area Max. swing diameter: D 660 mm Max. turning diameter: D 350 mm Max. bar capacity: D 66 mm Max. machining length: 520 mm Main Spindle Max. spindle speed: 5,000 rpm Spindle nose: JIS A2-6 Rated power (40% duty cycle): 15 kW Max. torque: 233 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 40 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 180 mm / 550 mm Tailstock Mount: MT NC axis, pressure via M-codes Dimensions & Weight Machine dimensions (L x W x H): 2,630 x 1,710 x 1,700 mm Weight: 4,500 kg (without chip conveyor and coolant) Chuck: Kitagawa BB208 with through-hole Chip Management Mayfran hinged belt chip conveyor Coolant pump 8 bar & chip flushing General Specification: Gsdpfx Aowzkzzjaxobl - SD MEMORY I/F (1 port) + USB MEMORY I/F (1 port) - Mazak standard colour - NC-controlled tailstock - Tailstock pressure adjustment - Tailstock with fixed live center mount - Operator door with interlock switch - Double foot switch - Fully enclosed work area - Work area lighting - Safety features compliant with global standards - Complete coolant system - Chuck condition monitoring - Automatic Tool Eye - 10.4" color screen - EIA/ISO package - LAN interface - Standard tool set

Condition: new, Year of construction: 2026, turning diameter over cross slide: 255 mm, spindle bore: 52 mm, turning diameter: 420 mm, turning length: 1,000 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, overall weight: 1,145 kg, Equipment: rotational speed infinitely variable, The Smart 410 Pro Vario Universal Lathe is a professional machine designed for light and medium-duty turning operations. By combining advanced electronics with robust mechanics, this model provides an ideal solution for mechanical workshops, toolrooms, and maintenance departments. Bed made from cast iron, induction-hardened and precision-ground Mechanical foot brake reduces downtime Removable bridge allows machining of larger workpieces Quiet and smooth operation thanks to hardened and ground gear wheels Simple and quick adjustment of feed and speed Solid construction ensures vibration-free performance Sliding tailstock system for taper turning, handwheel with high-precision scale (0.02 mm) Central switching system for feeds and threading, with leadscrew and feed shaft Modern main spindle bearing with precision angular contact ball bearings 3-axis digital display included as standard Infinitely variable spindle speed adjustment via inverter with digital display for optimal adaptation to the workpiece Centres distance: 1000 mm Centres height: 210 mm Swing over bed: 420 mm Swing with bridge removed: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle nose: DIN 55029, D1-6 Min. spindle speed: 30 rpm Max. spindle speed: 3000 rpm Spindle speed range - number of steps / stepless: stepless (30–550 / 550–3000) Longitudinal feed range: (17) 0.05–1.7 mm/rev Cross feed range: (17) 0.025–0.85 mm/rev Metric threads: (42) 0.2–14 mm Inch threads: (45) 2–72 TPI Tailstock quill diameter: 50 mm Tailstock quill travel: 140 mm Tailstock taper: MT 4 Motor power: 5.5 kW Voltage: 400 V Dimensions (width): 2090 mm Dimensions (depth): 1050 mm Dimensions (height): 1600 mm Weight approx.: 1145 kg Scope of delivery: 3-jaw chuck DK11-200 mm / D6 Face plate 350 mm Fixed steady rest – max. passage 135 mm Travelling steady rest – max. passage 65 mm Coolant system 4-way tool post Micrometric longitudinal stop Threading dial Magnetic brake compliant with CE standards Gedpsyr I Sqefx Aaxobl Electromechanical spindle brake Filled with Shell Tellus 46 oil Halogen work light Change gears 2 centering centres Chip tray Service tools 3-axis digital display Infinitely variable spindle speed Legally required safety guards Full operating documentation in Polish CE Certificate 24-month warranty for all components at no extra cost

Condition: excellent (used), Year of construction: 2015, operating hours: 9,564 h, functionality: fully functional, CNC FANUC 31i-MODEL B5 TOOL PRESETS Gbedpewayv Ejfx Aaxel N. 2 SELF-CENTERING N. 7 HSK TOOLS

Condition: used, Year of construction: 2009, operating hours: 3,483 h, functionality: fully functional, total length: 5,550 mm, total width: 2,250 mm, bar diameter (max.): 95 mm, overall weight: 8,400 kg, Max. workable diameter from bar mm 95 Max. workable diameter from recovery mm 500 Max. workable length mm 1250 Max. rotating diameter mm 700 MAIN ELECTROSPINDLE: Variable rotation range rpm 40-2800 ASA spindle nose 8" Gbodpfxovv Ud Ro Aaxsl Spindle hole mm 111 Internal diameter of bearings mm 150 Self-centering diameter mm 315 Motor power kW 30 TAILSTOCK TO FOLLOW: Positioning stroke mm 1,100 Quilt stroke mm 150 Quilt diameter mm 115 MOTORIZED ELECTROSPINDLE HEAD: Type of attachment HSK-63 Max. revolutions RPM 6,000 Electrospindle motor power Kw 9 B AXIS UNIT: Total rotation range 205° Rotation range beyond the tailstock axis 15° Rotation range beyond the spindle axis 10° Angular position with mechanical block Every 5° CROSS SLIDE Max. Z stroke mm 1300 Max. X stroke mm 520 Max. stroke Y mm 210 (+120 – 90) TOOL MAGAZINE Magazine capacity 40 pos Max. diameter of tools with adjacent tools mm 80 Max. diameter of tools without adjacent tools mm 140

Condition: good (used), Type FEr LD 180/600/1000 Godpfeuhtmiox Aaxsbl 100% operational, automatic rotation