Used Pgcnc Fc1530 3Kw for sale (373)

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps Bedpfjz Ai Tpox Aa Isdh - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, travel distance X-axis: 1,524 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 100 mm, EC3 Single Platform Fiber Laser Cutting Machine The EC series is an economical single-platform laser cutting machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, and brass. It meets various cutting needs for most of sheet metals. TECHNICAL SPECIFICATIONS Features • Compact and complete CE electrical panel with safety relay on the back side of the machine equipped with AC unit, protected from dust. • Operating panel with large LCD display and movable arm mount, easy to use. • Loading weight up to 1000kg • Auto-focus laser head with automatic detection • Industial components with high durability • Both sides access for dust trolleys • Emergency botton on remote control Processing Format & Working Range Processing Area (L×W): 3.050 x 1.530 mm X-axis Stroke: 1.524 mm Y-axis Stroke: 3.050 mm Z-axis Stroke: 100 mm Bjdpfx Aasxfi Irj Iedh Max. loading weight: 1.000 kg Accuracy X/Y Axis Positioning Accuracy: ±0.03 mm/m X/Y Axis Repositioning Accuracy: ±0.03 mm Speed Max. Moving Speed: 100 m/min Max. Acceleration Speed: 1.0 G Power Parameters Power Supply: 12.3kW/32A (380V/50Hz/3Phases) Protection Grade: IP54 Weight & Size Machine Size: 4.530 * 2.280 * 1.310 mm Machine Weight: 2.000 kg Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 3,000 mm, door opening height: 600 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 3kW fiber laser We aim to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideally suited for workshops and repair shops. A perfectly configured cutting parameters library is included, along with first-class service. - Includes 2D bevel cut function for weld seam preparation or the production of countersunk holes (see image) Please also consider our attractive leasing and hire-purchase offers. - Machine does not include an automatic pallet changer! Loading is performed on the long side of the machine - Very compact footprint - Extremely energy-efficient cutting system - Requires only approx. 4 x 4.5 meters of installation space - 3kW laser source from MaxPhotonics (G5/German version) - Laser generator with socket efficiency better than 30% - Suitable for aluminum - Top quality—schedule a viewing now! Cutting capacities: - Steel sheet up to 22mm (max) - Stainless steel sheet up to 12mm (max) - Aluminum sheet up to 10mm (max) - Brass sheet up to 8mm (max) - Travel range: 1500 x 3000mm (for large formats) - Machine control system in German - Safety light curtain for maximum operator protection - Comprehensive collision protection for the cutting head - Large laser safety windows for process observation - Extensive cutting parameter file - Nesting module included - Very easy to operate - High-performance laser chiller - Machine control system in German - German service and spare parts supply - Powerful laser chiller - Optional filter extraction system available (5.5kW with frequency converter for quiet operation) Leasing or hire-purchase is available through our financing partner Sale only to businesses. Delivery/consulting/sales only in Germany, Austria, and Switzerland. Machine dimensions approx.: Length: 4.0m Height: 2.3m Width: 4.5m Total weight: approx. 4500kg Bdodpfx Asyacqwsa Ieh Need a different laser power, table format, or table size? No problem. I am happy to prepare a customized offer. E.g., 2kW machine from €29,990 Not sure which laser power is right for your application? Of course, I can perform cutting trials according to your requirements. There are many possibilities here.

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-CT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - Ingress Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. Rotary table for hollow tubes The machine is equipped with a rotary table for positioning the profile in relation to the laser head. - Maximum length of machined tube: 6000mm - Diameter of profile holder: 220mm Bsdpfephpi Ejx Aa Iedh ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Here is an offer for a highly precise laser cutting machine with 3000 watts of laser power. Type: LG-1313/3kW HaiCut Premium Line - Maximum configuration - Innovative 3-gas switching system (Pressure and gas type can be controlled in the software) Bodpfji Igauox Aa Isdh Cutting with N2, O2, mixed gas (compressed air) - Automatic front door - Machine bed lined with refractory material - Machine bed and axes measured and adjusted with Renishaw interferometer Our goal is to offer the best, most reliable, and most affordable laser machines currently available on the market. Our machines are ideal for workshops and repair shops. A perfectly designed cutting parameter library is included in the scope of delivery, as well as first-class on-site service. Please also note our attractive leasing/hire-purchase offers. New machine. We would be happy to demonstrate the machine to you at our facility. Travel range: approx. 1300 x 1300 mm Table size: approx. 2500 x 1300 mm (i.e. there is space in the machine for a medium-sized sheet) Extendable cutting table For highly precise cutting of metal Everything is fully installed and adjusted Cutting software in German Incl. control panel module Very easy to operate Switch on and start Laser source from Max Photonics (G5/German version) with 3000 watts of power Extensive electronic and mechanical collision protection measures for the cutting head Large laser protection window on the front door Automatic front door Safety light curtain for maximum operator protection Cutting of stainless steel up to 12 mm Cutting of steel up to 22 mm Cutting of aluminum up to 12 mm Cutting of brass up to 5 mm Heavy-duty industrial quality Complete system / ready for immediate use LED work area lighting 200mm pipe connection for fume extraction Incl. extraction fan Leasing or hire-purchase is possible via our financing partner. Different power or table size needed? - No problem, we have several machines in stock or can deliver them within a short time. The sale is exclusively to commercial enterprises. Delivery/consultation/sale only in Germany/Austria/Switzerland. Machine dimensions approx.: Width: 3.5 m, Height: 2.1 m, Depth: 3.5 m Weight: approx. 3.5 tons

Condition: new, functionality: fully functional, control type: CNC control, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,050 mm, table width: 1,530 mm, working length: 3,050 mm, working width: 1,530 mm, cutting speed: 120 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.02 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, IMPACT 3015A Fiber laser cutting machine suitable for high-precision cutting of metal plates, with high photoelectric conversion rate. It is a new energy-saving and environmentally friendly product, and one of the world’s leading technology products. It is suitable for cutting metal plates such as stainless steel, carbon steel, alloy steel, silicon steel, aluminum, copper, brass, titanium alloy, galvanized sheets, etc. Unmatched Accessibility - Because the machine is an "open type" (without a full protective enclosure), operators have 360° access to the cutting bed. This makes loading raw sheets and unloading finished parts significantly faster and easier, especially when using a forklift or overhead crane. Space Efficiency - The 3015 model is designed with a compact footprint. Without the bulk of a large safety cabin or a dual-shuttle table system, it fits comfortably into smaller workshops where floor space is at a premium, providing a high "power-to-square-foot" ratio. Cost-Effectiveness - Open-type machines generally have a lower initial investment compared to fully enclosed or exchange-table models. They are also easier to maintain, as all mechanical components (rails, racks, and motors) are readily accessible for routine cleaning and lubrication. Efficient and precise cutting of medium and thin plates: • Easy access for loading and unloading the material from all 4 sides; • Auto-focus laser head; • Automatic edge detection; • Nesting included for optimizing the drawings and optimize material usage; • Easy to operate; • CE standard. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Bjdpfx Ajyhclwja Ijdh Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display 18.5 inch Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system Voltage stabilizer & regulator unit CE mark Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, table length: 2,070 mm, table width: 1,070 mm, working length: 2,000 mm, working width: 1,000 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 100 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Offered here is a high-precision laser cutting machine with 3000-watt laser power Model: LG-1020/3kW HaiCut Premium Line - Fully equipped - Innovative 3-gas switching system (pressure and gas type controllable via software) Cutting with N2, O2, mixed gas (compressed air) - Automatic front door - Machine bed lined with refractory bricks (chamotte) - Machine bed and axes measured and calibrated with Renishaw interferometer Our goal is to offer the best, most stable, and cost-effective laser machines currently available on the market. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, as well as premium on-site support. Please also take note of our attractive leasing/financing offers. New machine, delivery time approx. 6-8 weeks We are happy to demonstrate the machine at our facility. Travel range: approx. 1000 x 2000 mm Table size: approx. 2070 x 1070 mm (i.e. the machine accommodates a small-format sheet) Sliding cutting table For high-precision metal cutting Fully installed and calibrated Cutting software in German incl. nesting module Very easy to operate Switch on and start working Laser source from Max Photonics (G5/German version) with 3000 watts output Comprehensive electronic and mechanical collision protection systems for the cutting head Large laser protection window in the front door Automatic front door Safety light curtain for maximum operator protection Cuts stainless steel up to 12 mm Cuts steel up to 22 mm Cuts aluminum up to 12 mm Cuts brass up to 5 mm Heavy industrial quality Complete system / ready for immediate operation LED work area lighting 200mm duct connection for fume extraction incl. extraction fan Leasing or financing available through our financing partner Require different power or table size? No problem, we have several machines in stock or available at short notice. Sales exclusively to commercial customers. Delivery/advice/sales only in Germany/Austria/Switzerland Bedpfxsyacwkj Aa Iodh Machine dimensions approx.: Width: 3.6m, Height: 2.1m, Depth: 3.3m Weight: approx. 2.5 tons

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 10 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 10 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,800 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Laser cutting machine with 3kW fiber laser Exhibition machine with few operating hours (approx. 10 hours) Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as is first-class service. A super-affordable entry into laser cutting technology - Designed specifically for steel and stainless steel processing Exhibition machine with very few operating hours - High-quality MaxPhotonics laser source - Extremely energy-efficient cutting system - Requires only approximately 3.0 x 3.0 meters of floor space - Top quality, arrange a viewing now! Cutting of steel sheets up to 20mm Cutting of stainless steel sheets up to 10mm - Travel range approx. 1300 x 1300mm - Size of the support table: approx. 1300 x 2500mm (i.e., a whole medium-format sheet fits into the machine) - Machine control in German - Automatic front door (secured with a light curtain) - Extensive collision protection measures - Large front window for observing the cutting process - Programmable, proportional valve for oxygen - Incl. cutting parameter file - Incl. box module - Very easy to operate - Powerful laser chiller - Incl. extensive wear parts package The sale is exclusively to commercial enterprises. Delivery / consultation / sale only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 3.2m Height: 2.3m Length: 3.3m Total weight: approx. 3400kg Leasing or hire purchase is possible through our financing partner. Do you need a different laser power, table shape, or table size? No problem. I will gladly prepare a suitable offer. Bdsdpfoy A Tu Tex Aa Ieh Are you unsure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. A lot is possible here. From 0.5 kW to 20kW laser power.

Condition: used, Used SEW electric motor Type: RUF70 DT100L4 Motor power: 3 kW Output shaft speed: 75 rpm Output shaft diameter: 40 mm Flange diameter: 300 mm See our other advertisements Bdodpfx Aexnkx Dsa Ish VMA Wekerom

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G-12A HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min Bdsdpfxouc Sife Aa Ijh X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation

Condition: new, Year of construction: 2026, Router CNC2030 ATC 4 axes, tilting spindle +/- 90 degrees working area 2100 x 3000 [mm] The ATC series of plotters was created for professional use in large industrial plants and factories. These machines are designed to process a wide range of materials. In order to meet the demands of heavier machining, the ATC machines feature an additionally reinforced construction and more powerful AC servo drives on each axis. A vacuum work table is standard on these machines. It is also possible to install a hybrid table. Plotters in this series are equipped as standard with automatic tool changing, a six-position linear magazine and a tool height sensor. The solutions used significantly speed up the machining process requiring the use of several cutters. Materials to be machined: wood wood-based materials (chipboard, MDF, OSB, etc.) plastics composites PVC non-ferrous metals (aluminium, brass, copper, etc.) CONSTRUCTION: The structure of the machine tool is made of steel and cast iron which gives it high rigidity, as well as resistance to the overloads associated with the machining process. WORKING SURFACE: The usable area of our machine tool is 2100 x 3000 [mm]. MATERIAL CLAMPING: The machine is equipped with a vacuum table. It is possible to install a hybrid or T-table. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 300 [mm] as standard (can be increased). DRIVES: Bsdpfsirfavex Aa Iodh SERVO motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes are driven using classic and proven helical rollers to ensure long service life and precision, while the Z axis is driven using a high-performance ball screw. All axes move on rail guides.... SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. The power supply is provided by an inverter, which has more power than the spindle, which protects against speed drops when operating under heavy load. TOOL STORAGE: The machine tool comes standard with a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine has been supplied with the appropriate CAD/CAM software in its latest version. The software makes it possible to design parts quickly and easily, which the programme then converts into so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is controlled by a controller, which has its own processor and operating memory to ensure stable and reliable operation. The machine controller is equipped with active vector analysis functions, so that operation of the machine is smooth and there is little overshoot during processing. The controller has a recovery function to continue operation after a power loss, so there is no need to initialise the programme from scratch. The controller's on-board memory allows the machine to work without having to load the programme each time.

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 40,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: exchange table, fully protected exchange table, ultra-high power, dual platform Laser power: 12KW15KW, 20KW, 30KW, 40KW, 3KW.6KW Bdsdpfxjwxam Ij Aa Ish Standard hardware: scrap car, fire brick, fully automatic butter filling, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, rear camera, internal camera, monitoring display, radiation-proof glass, top cover beam light curtain, partition dust removal Optional hardware: light-blocking rubber strip, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, top cover fan Optional functions: FDA configuration, CSA configuration, TUV configuration, conventional CE configuration

Condition: new, Year of construction: 2026, The ATC series of plotters has been developed for professional use in large industrial plants and factories for the production of complex large-size components. Thanks to its special design, the machine is adapted to the production of casting models and yachts, among others, significantly reducing processing times. ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. Bdedoiq U Tqspfx Aa Ieh WORK AREA: The usable area of our machine tool is 3000 x 6000 [mm] AXIS RANGE AND GATE CLEARANCE: Customised parameters DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 HSK cones. Additional tool magazine positions can be provided. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, Resonator: 3kW Operating hours: approx. 29,400 hours Bdjdpfxoz Hl Tkj Aa Ish Availability: Upon request Annual maintenance performed by Trumpf.

Condition: excellent (used), Year of construction: 2002, A medium duty tenoner suitable for many joinery and furniture companies. Fitted with Cut Off saw 250mm Top and Bottom Tenon head 100mm in length (2.2kw) Bdedpfxozudt Uj Aa Ieh Vertical tenoning Unit 35mm shaft diameter a 180mm in length (3kw) Year 2002 Ex College Machine Condition - Like New

Condition: excellent (used), Year of construction: 2002, A medium duty tenoner suitable for many joinery and furniture companies. Fitted with Cut Off saw 250mm Bodpfx Aozudurja Isdh Top and Bottom Tenon head 100mm in length (2.2kw) Vertical tenoning Unit 35mm shaft diameter a 180mm in length (3kw) Year 2002 Ex College Machine Condition - Like New

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,790 h, controller model: B&R APC 910, laser power: 3,000 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Laser power: 3,000 W Sheet thickness (steel): 20 mm Sheet thickness (stainless steel): 16 mm Sheet thickness (aluminium): 12 mm Travel speed: 100/140 m/min Accuracy: 0.1 mm MACHINE DETAILS Control: B&R APC 910 Connected load: 33 kVA Dimensions & Weight Space requirement: approx. 7,800 x 5,900 x 2,300 mm Machine weight: approx. 11,400 kg Controller power-on hours: 2,472 h Operating hours: 15,907 h Laser power-on hours: 7,790 h EQUIPMENT Integrated solid-state laser TruDisk 3001 with 1 fiber output Fully automatic pallet changer (with light barrier) Enclosed machine frame with integrated components Motion unit for high-precision processing Drives with maintenance-free three-phase servo motors Sheet support accessible from both sides Enclosed beam guidance via laser light cable (fiber optic cable) Fully integrated chiller for laser and machine Integrated control cabinet Travelling fume extraction system Slag drawers 19" touch colour screen TruDisk power supply via machine Workspace lighting Positioning laser diode PierceLine FocusLine NitroLine Transport and installation device Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) TRUMPF Laser Fiber optic cable as per standard layout (laser placed directly next to machine) Bodpfxoyhmxuj Aa Ijdh Excitation via pump diodes Laser power control Laser logbook function Universal cutting unit Pierce head strategy Protective glass against lens contamination ControlLine: Height control and detection of sheet outer edge Simple drawing module Easy workshop programming Quick reproduction Integrated TRUMPF technology data Auto shut-off Programmable cutting gas/pressure selection ContourLine FastLine Microweld Tele-service via Internet Microjoint - handling at the control panel Adjustable dynamics Data transfer RJ45 network connection and USB interface CE mark Compact extraction unit Machine enclosure with certified viewing windows Motorised front door and rear access Enclosed machine roof

Condition: new, Year of construction: 2024, Description AORE S1530: (3 Kw) from stock our Demo machine. table length 3.060 mm table width 1.530 mm laser head Ray-tools autofocus laser capacity in Kw 3 total power requirement 25-30 kW We can deliver from (1 till max 6 Kw) overall dimensions 4950x2280x2130 mm weight of the machine ca. 4.550 kg Furnishing: - Max-photonics Laser source 3 Kw - Cyp-cut- (full option control) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - Nestling, With leapfrog, Edge seeking, Fly cutting - 27" touchscreen, keyboard, control panel - central Lubrication system Cutting capacities: - normal steel 18 mm - stainless steel 10 mm - aluminium 10mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm Bdodeyutm Sjpfx Aa Ioh - Z-axis travel 100 mm - Axis speed X / Y: 80 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm – Acceleration max. 0,8 G table change manual: - table load 800 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system - Spare part basic supply package - cutting from reflective sheet metal materials - Machines for cutting sheets metal - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m / min. - Accelerations up to 0.8 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components Like: - Yaskawa servo drives - Hiwin linear rails - Tongfei water chiller dual use - 2 CCTV camera’s on screen - Auto central lubrication .- Touch screen .-.YYC/APEX rack and pinion .- standard delivery is with power stabilizer - TBI high precision ball screw for Z axis - saw tooth blade table - air and gas pressure real time monitoring - CE declaration Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6035 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G Bdsdpfx Ajt E R Ruea Ish - Maximum load: 1200kg - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. Rotary table for hollow tubes The machine is equipped with a rotary table for positioning the profile in relation to the laser head. - Maximum length of machined tube: 6000mm - Diameter of profile holder: 350mm ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-6025-OT-6022 3kW Specifications - Maximum sheet size: 6000x2500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Energy requirements: 12.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. Rotary table for hollow tubes The machine is equipped with a rotary table for positioning the profile in relation to the laser head. - Maximum length of machined tube: 6000mm - Diameter of profile holder: 220mm ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Bsdpfx Aaotiy Scs Isdh Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6035 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) Bedpfx Aaethh Nxo Ijdh - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 2-day training with machine installation - 1st day (up to 8 hours) – machine commissioning and controller usage training - 2nd day (up to 8 hours) – work under the guidance of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: used, Year of construction: 2003, functionality: unexamined, power: 400 kW (543.85 HP), temperature: 95 °C, number of chambers: 2, For sale are 2 dismantled drying chambers. Designation: ZLSM-5x1.20-1x3.10-07.72-2-F The drying chamber was designed for drying wooden pallets. Bdjdpfx Aezyk D Dja Ijh Internal length: 8x0.90m + 0.52m Stacking depth: 5x1.20m + 4x0.10m Stacking height: 1x3.10m + 1x0.10m + 0.40m Heating capacity per chamber: 400kW The parts shown in the photos are still available. - Various sheet metal and frame parts - Mühlböck MB4000 control system - 2 sliding doors, each approximately 3.6x7.7m; the buyer must arrange for transportation in advance - 4 heating coils with dimensions 1.30x3.65m - 8 fans, each with 3kW, internal diameter 0.8m, air flow 27500m³/h The insulation has already been removed. The drying chamber is sold as defective and incomplete. Inspection is absolutely necessary!

Condition: new, Year of construction: 2026, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. DRIVES: High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. SOFTWARE: Bodpoirmgfofx Aa Isdh The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-TA-6022 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Bodstiy I Iepfx Aa Ijdh Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-OE 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - Ingress Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Free package of drawings Each Otinus laser cutter comes with a comprehensive, ready-to-use CAD drawing package. Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training including installation of the machine - 1 day up to 8 hours - installation of the machine and learning to use the controller. - 2 days up to 8 hours - independent work under the supervision of our technician - possibility of programming specific details that are made by the Client. Bedpfx Aephpfloa Iedh Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package