Used Parker Hannifin Gmbh Vertical Light Stack Module for sale (80,589)

Year of construction: 2009, condition: used, conditioner with filter, pressure regulator, stopcock filter with pressure regulator P3KEA14ESABNGP stopcock P3KVA14LN inlet pressure upto 17 bar Lsdpfx Aevimu Ismnsrl controlled pressure 8 bar connection 1/2" wall mount

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Lrjdpjy S Rw Defx Amnsl Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, year of last overhaul: 2025, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Lsdpfxsy S Rv Tj Amnerl Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2014, condition: used, Industrial water treatment and distillation system for the treatment of industrial wastewater and process water, with integrated control, collection tanks, and a new pump following a recent inspection. Manufacturer: H2O GmbH Model: VACUDEST XS-XL Machine type: Industrial water treatment system Year of manufacture: approx. 2014 Operating manual available Control with touchscreen HMI USB port available Ethernet port available Serial interface available Industrial PC control New pump installed Inspection recently carried out Collection tank for industrial wastewater available Collection tank for distillate available Tank material: PP gray Medium: Industrial wastewater Medium: Distillate Medium: Acidic and alkaline aqueous solution Tank volume, industrial wastewater: approx. 10,280 liters Tank volume, distillate: approx. 10,732 liters Tank volume, VacuCIP tank: approx. 1,306 liters Permissible operating temperature, tanks: 40 °C Permissible operating temperature, VacuCIP tank: 80 °C Specific weight, tanks: 10.00 kN/m³ Specific weight, VacuCIP tank: 11.00 kN/m³ Permissible operating pressure: 0.00 bar VacuCIP alkaline 1.26 pH value: >12 Lredoy S Rr Uopfx Amnsl Concentration: 1:10 Closed industrial design Pipeline and tank system made of stainless steel and plastic.

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Ljdpfx Amjyhxl Ronerl Price ex location: €650 (net) Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop

Condition: new, feed pressure / bar liter capacity / l total power requirement / kW Lredpfx Aey S Dz Nomnel

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, laser hours: 2 h, laser power: 30 W, laser wavelength: 1,064 nm, laser type: fiber laser, laser source manufacturer: Raycus, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile Lrodpoqfcvijfx Amnsl - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) Lodpfxjy T Ixns Amnsrl with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: used, This listing is for 1 of 6 Parker SciLog SciPres Pressure Monitor with Pressure Sensors The unit is in full working condition and is ready for immediate release. This Unit is Supplied with Scilog Scipress pressure sensorsand cables. The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals Lrodpexxx Tqofx Amnjl - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations

Condition: new, Parker D1VW001CVJWL91 directional valve 24 VDC, unused, 100% functional, scope of delivery as per photos Ledpfxjy Srpzj Amnjrl

Condition: good (used), mileage: 148,321 km, power: 184 kW (250.17 HP), first registration: 10/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,550 mm, fuel: diesel, fuel tank capacity: 300 l, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, total length: 10,000 mm, total width: 2,550 mm, total height: 3,750 mm, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, loading space length: 8,200 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2023, Equipment: AdBlue, Technical Information Number of cylinders: 6 Engine displacement: 6,871 cc Maximum front axle load: 4,480 kg Maximum rear axle load: 8,480 kg Weights Unladen weight: 6,920 kg Payload: 5,070 kg Gross vehicle weight (GVW): 11,990 kg Functional Loading platform height: 300 cm Maintenance, History and Condition Lrodpfoy Szlfox Amnol APK (General Technical Inspection): valid until 01/2027 Technical condition: good Visual condition: good Further Information Please contact Martin Vos Vos, Martin Martin Vos, or Martin Vos for more information. = Company Information =

Condition: new, cutting width 115 und 82 mm Cutting height 55 mm Motor output 2.0 kW machine weight ab. 45 kg KS crosscut saw for cutting (glass) strips with manual and electronic length stop Suitable for wood, PVC, aluminum ----- Brief manufacturer's description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade diameter: 250 mm Extraction nozzle diameter: 45 kg ----- Technical description: Item 1.1 Crosscut and miter saw type KS, 2 kW, 400 V, 30/40 mm saw blade holder Item 1.2 Pivot point LEFT Item 1.3 Pneumatic material clamping for KS, on both sides of the saw blade, 2 horizontal pneumatic cylinders, controlled via roller valve during saw stroke, can be switched off Item 1.4 HM circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth neg ----- ----- Lrodpfjy T R Sqjx Amnol Price of the above machine on request! Plus packaging and shipping ----- Options with additional charge: Item 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Item 1.6: EUR 695.00 Machine stand for KS crosscut saw ----- Item 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for cutting strips Travel distance 1.8 m, overall length 2.0 m 10" touch display, 230 V connection Feed speed 40 m/min Direct measuring system – repeat accuracy +/- 0.1 mm Working mode: (1) automatic absolute stop, (2) cutting lists, (3) pusher cutting lists, (4) step measurement, (5) fine adjustment Program memory for up to 999 cutting lists USB import and direct editing of cutting lists on the terminal Stop can be folded away to the rear With support foot Item 2.2: 295.00 EUR Support 2 m, right, 110 mm wide, with support ----- Item 3.1: Manual length stop EUR 600.00 Length stop 2 m, left, with 110 mm wide support, with scale, foldable stop slider and support Item 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with bracket ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 100 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, input frequency: 50 Hz, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 Ljdeywg Sbjpfx Amnerl - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 140 kg, total length: 900 mm, total width: 800 mm, total height: 2,000 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg Lrsdpfx Asxuvk Eomnol

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Volumetric flow rate of air (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded connection (air): G 2" Threaded connection (water): G 3/4" Weight of the aftercooler: 11 kg Dimensions of the aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Volumetric flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss Ledpjdzqn Uofx Amnorl All mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. used high-pressure pump BFT Ecotron 40.22 (650 operating hours) (Product photo as an example) The machine is CE-certified. Lrodpfxjwrn Iys Amnsl

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) Ljdowgc I Rjpfx Amnjrl (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Lsdpfofhgvwex Amnerl Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection Lrsdpfx Ajif Ek Romnjl • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm Lrsdpfxjfnlkwo Amnol • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Series and single-part production Enclosures, housings, cassettes, boxes 🚗 Automotive Industry & Suppliers Structural and body components Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings 🛠️ Mechanical & Plant Engineering Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Why Panel Benders in these sectors? ✔ High degree of automation ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets Lrsdpoyb Hu Nofx Amnol ✔ Fast processing for small to medium batch sizes

Condition: new, Year of construction: 2025, functionality: fully functional, operating hours: 30 h, ✅ 1. Metalworking companies with medium to high volumes 🔹 Series production / repeat parts If you produce many identical or similar parts, automation pays off as it reduces the cost per part and ensures consistent quality. 🔹 High production > 1,000 parts/month The higher the output, the faster the investment pays for itself through increased productivity. ✅ 2. Companies facing skilled labor shortages or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially replace skilled operators and safeguard production capacity. 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → higher output without additional personnel. ✅ 3. Companies with complex bending processes or high quality requirements 🔹 Tight tolerances / minimizing errors A robot ensures consistent repeatability. 🔹 Complex downstream processes (e.g. handling, deburring, stacking) An integrated robot can take over tasks that would otherwise be performed manually. ✅ 4. Manufacturers facing tight deadlines or cost pressure Short delivery times required Automation reduces throughput times. 🔹 Cost pressure due to competition Longer machine utilization and lower unit costs improve competitiveness. Lredpjyb I Azsfx Amnol ✅ 5. Future-oriented companies 🔹 Industry 4.0 / digitalization An automated press brake can often be integrated more effectively into IT/MES systems. 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Entry-level model panel bender bending center Ljdpfsy H Huhjx Amnjrl For detailed information and a personalized quote, please send us your inquiry. We will process it as quickly as possible and get in touch with you.

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: SK03UT6P0097 / SK01TMFY3097, type of input current: AC, input voltage: 230 V, The 3D laser scanner Trackscan Sharp49 offered here is a mobile, tracker-based 3D scanner, manufactured in 2023, with an original price of €100,000.00. Its special feature is that it allows you to digitize components without having to attach targets to the component. This is possible because targets are already located on the housing of the laser scanner and are registered by the tracker unit. This measuring device is very suitable for the rapid digitization of large components of several meters in size, while maintaining a relatively good level of accuracy. The device was calibrated in an ISO 17025 accredited laboratory upon delivery. We recommend having the manufacturer perform a calibration upon taking possession of the device. The scan software is included in the offer. Optionally available is a touch probe for tactile point measurement on objects and a laptop. An excerpt of possible application areas: - Digitization of manufactured components for subsequent metrological evaluation, e.g. as part of initial sample tests - Digitization of objects/spare parts for subsequent reverse engineering, e.g. for the production of a spare part or design changes - Digitization of larger machine systems and room areas for planning and simulation purposes - Digitization of vehicles in the tuning sector Technical specifications: 3 laser modes Scan rate: Up to 2,600,000 measurements/s Volume accuracy: at 10.4 cubic meters: up to 0.049 mm at 28.6 cubic meters: up to 0.067 mm at 49.0 cubic meters: up to 0.089 mm Recommended component size: 0.1m - 12m Weight, tracker case fully loaded: 37 kg Weight, scanner case fully loaded: 21 kg Weight, tracker unit: 6.8 kg Ledpjw Id E Eofx Amnorl Weight, scanner unit: 1.75 kg The device can be inspected while powered on.

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Lodpfxei Huzxj Amnorl Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition