Used Meusburger Low Loader Semitrailer for sale (15,197)

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2011, total length: 13,870 mm, total width: 2,550 mm, Equipment: ABS, Due to the large number of unreliable emails, not all emails will be answered. No TÜV inspection certificate. German vehicle registration document / German semi-trailer. First owner. "ERRORS, TYPOS, AND PRIOR SALE EXCLUDED." Nsdpfez Nuibex Abyodc

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted Njdpslthgusfx Abyedc * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: used, empty load weight: 6,140 kg, maximum load weight: 36,860 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2019, suspension: air, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 8 x container locks, rung pockets, lashing eyes, surcharge for ramps: €1,500, vehicle offered on behalf of the customer, -- subject to printing errors, errors and changes, sample images --, more details under: !, More Details: ! Nedpfxj Aa N Tus Abysdc

Condition: used, maximum load weight: 33,525 kg, overall weight: 46,000 kg, axle configuration: > 3 axles, first registration: 04/2008, Year of construction: 2008, Equipment: ABS, Manufacturer Kel-Berg / Faymonville Model 4 akslet 3 m Udtræks Maskintrailer Year 2008 Condition Good Serial Number SKBE58S407KE12547 Ref. nr. 7972 Reg. date: 30-04-2008 Drum brake: ? ABS: ? Rear axles: SO F Suspension: Air Tire Size: 235/75R17,5 Cover% left 30-50% Toolbox: ? Ndjdpfjxa Tdmex Abyjc Total weight: 46000 Kg Net weight: 12575 Kg Load capacity 33425 Kg Inside length: 8.75m / 12.10m Extraction: 3 m Forced steering axles: 3+4 Hydraulic ramps: ? Hydraulic rear support leg: ?

Condition: used, first registration: 01/2016, loading space length: 13,382 mm, loading space width: 2,410 mm, loading space height: 3,157 mm, * SAF axles Nedpfxowz Dm Do Abysdc * Hydraulic loading ramp * Hydraulic supports * Winch * Remote control * Edscha cover -----Internal vehicle number: 11079----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp: German, English -- WhatsApp: German, English, Arabic

Condition: new, maximum load weight: 35,240 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, total length: 13,200 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLH S HS 3 / 3H – 18 / 30 Low-bed trailer / 3-axle / hydraulically steered Immediately available, also available with a grating floor. Manufacturer: Kässbohrer * Type: K.SLH S HS 3 / 3H – 18 / 30 * 3-axle low-bed trailer * BPW axles * Air suspension * Drum brakes * 1st, 2nd, and 3rd axles hydraulically steered * Axle liftable * Manual lift axle control * WABCO EBS 2S/2M with ABS and RSS * Tires: 245/70 R17.5 * M+S / 3PMSF tires * Tire pressure monitoring system * WABCO SmartBoard * Electric motor pump for steering * Semi-automatic tracking of the hydraulically steered axles Dimensions / Weights: Overall length: 13,250 mm * Overall width: 2,550 mm * Fifth wheel height: 1,250 mm * Gooseneck length: 3,900 mm * Platform length: 9,300 mm * Platform height: 875 mm * Wheelbase: 8,800 mm * Axle distance: 1,360 mm * Tare weight: approx. 12,760 kg * Technical axle load: 30,000 kg * Fifth wheel load: 18,000 kg * Technical total weight at 80 km/h: 48,000 kg * Technical total weight at 40 km/h: 51,000 kg Wiese Transporttechnick - Dealer Chassis / Loading platform: High-strength S700 MC steel * 45 mm hardwood floor * Steel floor with drop structure over the wheels * Lateral widening * Widening up to 300 mm * 2" kingpin * Mechanical rear supports, load capacity 45 t * Partially metallized chassis * Rear end tapered by 500 mm / 10° Wiese Transporttechnick - Dealer Ramps: Hydraulic, folding ramps * Ramp load capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulically adjustable * Hardwood surface * Hydraulic gooseneck ramps * Ramp securing via chain tensioners Wiese Transporttechnick - Dealer Load securing / Equipment: Tie-down points: 10 × 10 t / 12 × 8 t / 22 × 5 t * 16 lashing pockets 80 × 80 mm * 4 container locking pockets for 1 × 20 ft * Tool box on the gooseneck, approx. 2,540 × 600 × 460 mm * Central lubrication system * LED rotating beacon * 2 work lights at the rear * Extendable warning boards with LED position lights * Storage box for widening planks * Chassis color: RAL 3020 Traffic Red Other: LED lighting * Aspöck EUROPOINT 3 LED Nodpfx Aez Ec Trsbyjdc * Spare wheel holder * 12 rims/tires * Widening panels * Extensive heavy-duty / construction machinery equipment Errors, changes and prior sale are subject to change.

Condition: used, maximum load weight: 34,500 kg, overall weight: 50,000 kg, axle configuration: 2 axles, first registration: 05/2025, next inspection (TÜV): 05/2026, loading space length: 12,200 mm, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 320 mm, Year of construction: 2025, Equipment: ABS, 2-axle low-bed/drop-deck trailer with full equipment First registration 05/2025, new vehicle Overall length 13,065 to 17,565 mm (single telescope 4,500 mm, extendable in 500 mm increments) Fifth wheel height 1,200 mm Length of drop-deck in normal position 6,650 mm Length of drop-deck extended 11,150 mm Length of gooseneck 3,650 mm Length of rear axle bogie 2,765 mm Loading height on rear axle bogie only 845 mm Ndjdsz Iu U Hepfx Abyjc LOADING HEIGHT OF DROP-DECK only approx. 300 mm (loaded) Total weight, technically 50,000 kg Fifth wheel load, technically up to 26,000 kg Axle load, technically 24,000 kg Unladen weight 15,500 kg Chassis with 3-layer paint finish Detachable gooseneck with external main frame Central lubrication system for front section and additionally 1x for rear section All axles hydraulically steered GIGANT axles with drum brakes WABCO trailer EBS with anti-roll system RSS WABCO Smartboard TRAILING AXLES with hydraulic suspension, lifting height 600 mm REMOTE CONTROL Tires 9x 245/70 R 17.5 Continental 24-volt electrical hydraulic system Overwidth package 10 pairs of folding load area extensions, 225 mm each 3 pairs of CONTAINER locking adapters for accommodating a 40 FT or a 20 FT container Side wall construction on fifth wheel platform Ramps for the drop-deck platform 5 pairs of swivel lashing eyes with a lashing force of 10,000 daN in the drop-deck 4 pairs of outrigger pockets in the outer frame 3 pairs of swivel lashing eyes on the rear section 1 pair of lashing eyes in the rear bumper, LC 6,000 daN RENTING is the new BUYING; with us, it is also available for rent or in a full-service lease – immediately available.

Condition: used, maximum speed: 100 km/h, Equalising block for low-bed semi-trailer Dimensions – see photos ##### PLEASE CALL – NO EMAILS! ##### Njdpfx Abez Sx A Rjyodc

Condition: used, overall weight: 34,000 kg, axle configuration: > 3 axles, first registration: 02/1998, loading space length: 13,000 mm, loading space width: 2,550 mm, Equipment: ABS, Nooteboom MC0-73-04V Low-loader with Steering Axle For inquiries: 0726698 * Permissible total weight: 34,000 kg * Tare weight: 17,220 kg Nedpfx Abjzu Ubcsyodc * ABS * EBS * 4-axle air suspension with hydraulic steering * Hydraulic loading ramp * SAF axles Dimensions (loading area/platform) Length of low bed: 9,100 mm + platform/gooseneck: 3,900 mm Tires: 1st axle: 245 / 70 R 17.5, 20% air-sprung, steering axle 2nd axle: 245 / 70 R 17.5, 40% air-sprung, steering axle 3rd axle: 245 / 70 R 17.5, 40% air-sprung, steering axle 4th axle: 245 / 70 R 17.5, 35% air-sprung, steering axle ----Price: 21,900 EUR + 19% VAT For further questions, you can reach us at the following phone numbers: * We speak: German, English, French, Polish, and ??? Typographical errors, errors and prior sale excepted.

Condition: used, first registration: 11/2024, color: black, Manufacturer: Bickel Tec platform low-loader with access ramps Length: 13,600 mm Loading height: approx. 880 - 900 mm GVWR (legally permitted): 40,000 kg GVWR (technically possible): 48,000 kg Fifth wheel load: 18,000 kg Axle load max: 3 x 9,000 kg / 10,000 kg Unladen weight: approx. 11,900 kg Floor: BICKEL heavy-duty perforated floor made of fine-grained steel with anti-slip surface 64 tie-down points, each with a capacity of 7.5 tons. The perforated floor allows for securing loads with a capacity of 3 tons each. Loading platform for loading the gooseneck, hydraulically adjustable (height) Suitable for transporting in the raised and loaded state up to a maximum of 10 tons. Ramp angle: approx. 6° Taper at the gooseneck: approx. 900 mm x 6° Taper at the rear: approx. 1,650 mm x 6° 4 x stainless steel toolboxes Winch: Electric winch Come Up DV 18 for 8,200 kg pulling force, incl. 27 meters of 13 mm wire rope, remote control Ramps: Ramp length 4,800 mm, width 750 mm, approx. 6° approach angle Access ramps: Split access ramps with hydraulic lateral adjustment, fully extendable with hydraulic extension of the entire ramp, with mechanical telescopic pivoting supports. Additional extension support legs mounted on the ramp Axles: All three axles with hydraulic forced steering Follow-up steering controlled via radio remote control Follow-up steering via 24-volt electric unit. With pressure gauge. 1st axle: Lift axle Tires: 12 tires / 235/75 R 17.5 Supports: Drop-down supports front and rear, 1 x telescopic hydraulic cylinder on the right and left Ndjdpfx Abezx Uvueysc Sale exclusively to commercial businesses, with exclusion of any warranty. Errors and prior sale excepted.

Condition: used, maximum load weight: 26,250 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/1998, total length: 1,265 mm, * Müller Mitteltal TS3 3-axle low-loader * First registration: 1998 * 3rd axle with trailing steering * Air suspension * Drum brakes * SAF axles * Wheel recesses at 70 cm * Width extensions from 2.55 m to 3 m * Hydraulic ramps, folding and sliding * Overall length: 12.65 m * Length from kingpin: 12.10 m * Loading length: 9.0 m at 0.85 m * On the gooseneck: 3.50 m at 1.45 m width Nedpfxe Aa Hars Abyedc * Unladen weight: 9,750 kg * Technical total weight: 47,000 kg * Permissible total weight: 36,000 kg * Payload: 26,250 - 37,250 kg * TÜV (technical inspection): 03/27 * SP (safety inspection): 09/27

Condition: used, overall weight: 47,000 kg, axle configuration: 3 axles, first registration: 11/2004, next inspection (TÜV): 08/2026, * Müller Mitteltal TS3 low loader semi-trailer * First registration: 11/2004 * 3 axles * Air suspension * Gigant axles * Hydraulically operated long ramps, extendable and foldable * Load width extensions from 2.50 m to 3.0 m * Loading length: 8.50 m at 0.85 m loading height * Loading length on neck: 3.40 m at 1.50 m loading height * Support legs * Unladen weight: 10,260 kg * Technical gross weight: 47,000 kg * TÜV valid until: 08/2026 * General inspection valid until: 02/2026 Ndedpfxsyq A D Eo Abyjc

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulically adjustable loading ramps (width) * Air suspension * Extendable * Tare weight: 11,020 kg -----Internal vehicle number: 11010----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp – German, English – WhatsApp – German, English, Arabic. Ndodpfx Abewta Alsyjc

Condition: used, empty load weight: 9,520 kg, maximum load weight: 38,480 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2020, suspension: air, tire size: 235/75 R17,5 140J, color: other, gearing type: other, front tire size: 235/75 R17,5 140J, rear tire size: 235/75 R17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Ndodjz Td R Aopfx Abyoc

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/1998, loading space length: 15,257 mm, loading space width: 2,530 mm, Equipment: ABS, Broshuis E2190/27 Low-loader, telescopic trailer, steering axle For inquiries: 0926861 * Permissible total weight: 48,000 kg * Tare weight: 9,840 kg * Telescopic * ABS * EBS * 3-axle air suspension * Follow-up steering axle Dimensions (loading area/platform) Length of low-bed: 8,934 mm + 6,323 mm (telescopic) * Platform/gooseneck: 3,630 mm * Width: 2,530 mm Tires: Ndjdpfxez Hrxto Abysc 1st axle: 235 / 75 R 17.5, 30% air suspension 2nd axle: 235 / 75 R 17.5, 30% air suspension 3rd axle: 235 / 75 R 17.5, 30% air suspension, steering axle ----Price: 19,900 EUR + 19% VAT For further questions, you can reach us at the following phone numbers: We speak: German, English, French, Polish, and…? Typographical errors, errors and prior sale are subject to change.

Condition: used, empty load weight: 10,860 kg, maximum load weight: 37,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 06/2018, suspension: air, tire size: 235/75 R17,5 140J, color: other, gearing type: other, front tire size: 235/75 R17,5 140J, rear tire size: 235/75 R17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Rubber surface, two-part ramp with grating, ramps spanning the entire width, electro-hydraulic pump for ramps or connection to the truck's hydraulic system. -- Subject to printing errors, errors and changes. Sample images. -- More details can be found at: !, More Details: ! Ndsdpfxsz Syfyo Abysc

Condition: used, maximum load weight: 42,000 kg, axle configuration: 3 axles, first registration: 08/2019, Equipment: ABS, Low loader Lecitrailer Ndodpfx Asullltebyjc Newly built Top condition

Condition: used, empty load weight: 6,560 kg, maximum load weight: 18,440 kg, overall weight: 25,000 kg, axle configuration: 2 axles, first registration: 09/2017, loading space length: 13,700 mm, loading space width: 2,540 mm, loading space height: 850 mm, wheelbase: 7,500 mm, color: blue, gearing type: other, driver cabin: other, Equipment: ABS, additional headlights, compressed air brake, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading platform: Length 13,700 mm x Width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock system * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminum ramps, 3,000 x 400 mm, laterally movable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Brake drums * Wheelbase 7,500 mm + 1,250 mm * Gross vehicle weight possible: 27,200 kg * Unladen weight: 6,560 kg * Payload possible: 20,640 kg If a new general inspection (TÜV) is required, we will be happy to provide you with an offer from our partner workshops. Ndjdpfxsxu Nnwe Abysc Our offer is generally WITHOUT new general inspection (TÜV), without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstandings regarding condition and suitability. Viewing and inspections are possible at any time by prior arrangement and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect information in this offer. Buyers are required to independently satisfy themselves as to the condition and specification of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, maximum load weight: 39,110 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 11/2024, next inspection (TÜV): 12/2026, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list: Complete equipment available upon request. Gooseneck * with beveled front corners at approximately 45° and a rear bevel of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading platform * with rear bevel of approximately 1,000 mm x 8° * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings, located horizontally at the front of the loading platform for (LC 10,000 daN) * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond plate flooring over the axles. Kingpin * JOST kingpin (mechanical) with 2-speed gearbox for approximately 24 tons lifting capacity (approximately 50 tons test load) Axles * BPW axles and suspension * 2 fixed axles * 1 trailing axle * Technical axle load: 12,000 kg each * Electro-magnetic parking brake activated via reverse gear and manually Air suspension * with raising and lowering valve. Axle tool. Tires * 235/75 R 17.5 3PMSF – Manufacturer of our choice Braking system Ndodpo Adw Tksfx Abyec * WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction * made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system * according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pin connectors according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paint finish * First-class and durable corrosion protection of the standard bead-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. * A high-quality 2-component (2K) topcoat in a solid color, RAL 3002 carmine red. * Rear section metallized and painted in RAL 9010 (pure white). * Rims in silver. * Metallic paint finish not possible. Includes the following additional equipment: * 2-inch kingpin * One galvanized steel front bulkhead, approximately 400 mm high. * One spare wheel holder in front of the bulkhead. * Yellow-red air couplings on the galvanized connection bar at the front. * 4 wheel chocks with holder on the bulkhead (± 5 kg). * Attachment rail for aluminum loading ramps on the gooseneck with integrated impact protection (± 56 kg). * Galvanized folding supports under the bevel of the loading platform. * One bracket for a rotating beacon on the rear of the trailer. * Yellow reflector tape according to EU regulations on the side and rear of the trailer. * On the gooseneck and the rear plate, one bracket each on the left and right for the warning signs, including a socket. * TPMS tire pressure monitoring system according to ECE R 141 * Data transmission to the towing vehicle takes place via the standardized EBS interface according to ISO 11992. * For correct display, the towing vehicle must be able to transmit and display this data. * On the gooseneck, aluminum side and rear walls, plug-in, approximately 2,440 x 400 mm (L x H). * The rear galvanized stake pockets are removable (length of the superstructure approximately 2,560 mm) (± 46 kg). * One tool box, galvanized, integrated into the

Condition: used, maximum load weight: 37,240 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2021, loading space length: 19,500 mm, loading space width: 2,550 mm, Year of construction: 2021, Equipment: ABS, Manufacturer HRD Model Lowloader 6,5 m. Extension Year 2021 Condition Very good Serial Number W09STTM3NMEN10036 Ref. nr. 8199 Reg. date: 10-03-2021 Drum brake: ? ABS: ? Rear axles: SO F Suspension: Air Tire Size: 235/75R17,5 Ndsdpfx Aboz Ddp Eeyjc Cover% left 40 - 40 - 40% Toolbox: ? Total weight: 48000 kg. Net weight: 10760 kg. Inside length: 19500 mm. Internal width: 2550 mm

Condition: new, maximum load weight: 40,017 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, Year of construction: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm hardwood flooring. Loading Platform: 5 pairs of folding external lashing rings (LC 5,000 daN). 3 pairs of folding external lashing rings (LC 10,000 daN). 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN). Njdpfx Aew Dl Hqjbysdc Approx. 48 mm thick hardwood flooring, checker plate covering over the axles. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: 205/65 R17.5 tyres as per manufacturer's specification. TPMS: TPMS tyre pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit via the standardised EBS interface according to ISO 11992. To ensure correct display, the tractor unit must be capable of transmitting and displaying this data. Axles: BPW axles, two fixed axles, two self-steering axles, air-suspended, with drum brake, with lifting/lowering function. The self-steering axles can be locked electronically via reverse gear or manually using an electromagnet. Axle tools included. Brake System: WABCO brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit. Electrical System: Electrical system according to EU regulations, 24 volt LED lighting by ASPÖCK-NORDIK (ASS3). All LED side marker lamps flash with the turn indicators. ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. Connections conform to ISO standards: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Construction: Steel structure made from high-strength fine-grained steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Paintwork: The entire steel structure is automatically shot-blasted with a turbine system after welding. A second abrasive blasting treatment with corundum ensures optimal adhesion of the coating system. HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for superior corrosion protection. Final coating with 2 coats of 2K topcoat, single-colour in a shade of your choice according to the RAL 841GL system. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint not possible. Paint system tested in salt spray test according to ISO 9227-NSS. Cavities sealed with special wax. Options included: 2" kingpin One galvanized steel bulkhead. Yellow-red air couplings on the galvanized front connection panel. 2 wheel chocks with holders on the bulkhead. Fixture at the rear of the gooseneck for ALU approach ramps. Further options upon request.

Condition: used, overall weight: 37,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 07/2026, Year of construction: 2018, Equipment: ABS, * Doll Fahrzeugbau 2-axle low-loader for forestry machinery, type T2H-0L * Air suspension * Hydraulically steered axles * Radio remote control * Overall length: 16.70 m * Low bed length: 9.50 m * Width: 2.55 m Ndodpfxsyxb Tvs Abysc * Gross weight: 37,000 kg (technically possible: 39,000 kg) * Unladen weight: 10,360 kg * Possible payload: 27,640 kg * Tyres: 235/75 R17.5 * Twin tyres * Ramps * BPW axles Roadworthiness certificate valid until 01/2027

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 * Detachable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels Ndedpfx Abjxarmaoyoc * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: used, maximum load weight: 120,000 kg, axle configuration: > 3 axles, first registration: 10/1993, Year of construction: 1993, Equipment: ABS, Manufacturer: GOLDHOFER Type: THP-SL Year of manufacture: 1993 / 2010 consisting of: - gooseneck with hydraulic unit (year of manufacture: 1993 - hydraulics: 2003) - 2-axle chassis module (year of manufacture: 2010) - 3-axle chassis module (year of manufacture: 1993) - 4-axle chassis module (year of manufacture: 1993) - excavator bed 5.8m rigid (year of manufacture: 2010 - payload 100 tons) - excavator bed 8m + 5m extendable (year of manufacture: 1993 - payload 120 tons) Available immediately. Subject to errors and prior sale. Nsdpfx Abjwlip Ejyedc

Condition: used, maximum load weight: 64,900 kg, overall weight: 94,100 kg, axle configuration: > 3 axles, first registration: 08/2021, Gooseneck, detachable * Loading platform: 3,750 mm x 2,480 mm * Maximum technical saddle load: 30,000 kg (without using the front axle) * Hydromechanical steering with multi-chamber hydraulic cylinder * Hydraulic lifting and lowering function * 2 support cylinders * Hydraulic differential lock * Operating elements for hydraulic functions on the left-hand side in the direction of travel, including a pressure gauge with a diagram for determining saddle load, as well as a pressure gauge for monitoring the pre-tension pressure in the steering system * Access ladder to the gooseneck * Hydraulic claw locking for the platform or axle * Multifunction quick coupler * Air gun for cleaning the multifunction quick coupler ---- Front 2-axle axle assembly * 4 wheels per axle line, ball-bearing swivel axle units * Axle manufacturer / BPW * Axle width: 2,750 mm / Wheelbase: 1,510 mm * Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS * Hydraulic axle equalization, lift: 600 mm * Ride height: 1,145 mm + 340 mm / - 260 mm * Additional lifting option for all axles in the front axle assembly * Floor covering: sheet metal * Additional warning sign holders, mounted on the front axle assembly ----Braking system with TIM Drum brake all-wheel drive air brake system with diaphragm brake cylinders * Automatic load-dependent brake (ALB) (AGS) * Parking brake by means of spring-loaded cylinders * EBS / ABS (Electronic Braking System) manufactured by KNORR-BREMSE * Socket for EBS on the front end of the gooseneck * Vehicle stability control RSP (Roll Stability Program) ----Flatbed platform, single telescopic * Two external box-shaped outer/inner beams * Height of the outer beams: 300 mm * Carrier width of the outer beams: 730 mm + 120 mm edge strip * Front end with coupling claws * Without floor covering between the two longitudinal beams * (L x W) 7,500 mm x 2,750 mm, telescopable by 2,800 mm to a maximum of 10,300 mm * With a separating point * Loading height, loaded: approx. 450 mm, ground clearance: approx. 150 mm * Including a short, permanently welded-on front ramp * And 1 pair of aluminum ramp wedges, at the front ----Rear 4-axle axle assembly * 4 wheels per axle line, ball-bearing swivel axle units * Axle manufacturer / BPW * Axle width: 2,750 mm / Wheelbase: 1,510 mm * Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS * Hydraulic axle equalization, lift: 600 mm * Ride height: 1,100 mm + 385 mm / - 215 mm * Floor covering: sheet metal ----Combined excavator-tipping body * (Length x Width) 5,770 mm x 880 mm/1,538 mm * Splash guard with water-absorbing mats on all axles * Aluminum partition sheet in the excavator body, front and rear, plug-in ----Load securing Gooseneck * 4 pairs of threaded sockets M30 Ndsdpfx Ajz Ivnusbyec * 1 pair of lashing points LC 20000 daN * 2 pairs of lashing points LC 800 daN Front axle assembly * 3 pairs of threaded sockets M36 on the loading platform (16,000 daN) * 1 pair of threaded sockets M36 on the side (16,000 daN) * 1 pair of lashing points LC 20000 daN Loading platform, flatbed * 1 pair of lashing points LC 20000 daN * 3 pairs of lashing points LC 10000 daN * 3 pairs of threaded sockets M 30 * 3 pairs of threaded sockets M30 on the inner beam Axle assembly * 2 pairs of lashing points LC 10000 daN * 2 pairs of threaded sockets M36 on the loading platform (16,000 daN) * 3 pairs of rail pockets 100 x 50 mm (LC 2000 daN) * 1 pair of threaded sockets M36 in the excavator body (16,000 daN) * 4 pairs of el