Used Mep Shark 282 Ccs / Mde for sale (3,713)

Condition: new, dimensions of saw-band 3320x27x0,9 mm Rcodjyv Na Sjpfx Almob 40/80 m/min 335 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm 260 mm 250 270x200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm 200 mm 180 mm 200x160 mm weight of the machine ca. 640 kg dimensions of the machine ca. 2140x1300x1950 mm

Condition: new, 36/72 m/min 285 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: square 220 mm capacity 90 degrees: round 250 mm capacity 90 degrees: flat 280x220 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 140x100 mm capacity 45 degrees: round 230/200 mm capacity 45 degrees: square 200/170 mm capacity 45 degrees: flat 220x200/200x140 mm total power requirement 1,5/1,8 kW Weight 485 kg Overall size 1970x1150x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired Position and cycle start via the manual button. Rjdpfjyv Narex Almjcb Upper position is saved automatically.

Condition: new, dimensions of saw-band 2950x27x0,9 mm 36/72 m/min 285 mm capacity 90 degrees: round 250 mm capacity 90 degrees: square 230 mm capacity 90 degrees: flat 280x200 mm Rcedpfoyvvqksx Almsb capacity 45 degrees: round 190 mm capacity 45 degrees: square 180 mm capacity 45 degrees: flat 180x180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 110x110 mm total power requirement 1,5/1,8 kW weight 375 kg dimensions 1700x1000x1650 mm Domestic equipments: - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed

Condition: refurbished (used), Year of construction: 2011, Used automatic metal band saw MEP SHARK 282 nc evo Year of manufacture: 2011 Blade dimensions: 2950x27x0.9mm Cutting angle: from -45° to +60° Four operating modes: manual, semi-automatic dynamic, semi-automatic, and automatic Blade cutting speed: from 15 to 100m/min Cutting capacity at 0°: - round 250mm - square 220mm - rectangle 280x220mm Rodpfjykvg Hjx Almocb Machine weight: 980kg The machine is fully refurbished.

Condition: good (used), Year of construction: 2015, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC Rcedpfxey I Da Rs Almjb total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: used, total height: 1,750 mm, total length: 1,900 mm, total width: 1,200 mm, Empty weight: 500 kg Redpfxoy E Shwe Almjcb - Documentation available: No - CE certificate present: No - Drive system: Conventional - Saw type: Semi-automatic - Horizontal/vertical: Horizontal - Mitre cutting available: Yes - Round cutting capacity [mm]: 260 - Power [kW]: 1.5 - Saw blade length [mm]: 3150 - Saw blade width [mm]: 25.4 - Saw blade thickness [mm]: 0.9 - Saw speed [m/min]: 72 - Workpiece clamping: Hydraulic - Options: Digital readout - Transport dimensions: 1900mm x 1200mm x 1750mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm Rcodpfxsy Hu H Es Almob -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg

Condition: used, Year of construction: 1997, dimensions of saw-band 3150 x 25,4 x 0,9 mm 20/40 m/min capacity 90 degrees: round 260 mm capacity 90 degrees: square 250 mm capacity 90 degrees: flat 320 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 210 mm Rcjdpfxoyyc A Io Almsb capacity 45 degrees: flat 240 x 200 mm

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: Rcjdpfxexabave Almob - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the start of the cut position - Manually operated band tension control with indication on the display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed

Condition: new, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2 mm cutting diameter minimum 5 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MPE CNC total power requirement 2,2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Rodpfjxaa Ewex Almjcb Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: reconditioned (used), Year of construction: 2015, Used automatic hydraulic band saw for metal MEP Shark 230 nc hs 5.0 Redpfstva Nhjx Almscb Automatic auger chip remover Blade size: 2950x27x0.9 Choice of cutting speed with inverterr: from 15-100 m/min Capacity: round 230mm, square 230x230mm Year: 2015 Possibility of cuts also in semi-automatic mode The machine has been fully serviced, the following parts have been replaced: all bearings, reducers, both wheels (pulleys) leaf, hard metal plates in guides, main shaft, coolant pump, two jaws, coolant pipes,yojstick, fans and other consumables.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen Rsdpfxsfg E H Uo Almjcb electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Rsdpfx Aljfg E Iaemjcb Double belt speed (40/80 m/min.)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min Rsdpfx Ajfg E H Relmjcb dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: good (used), Year of construction: 2019, machine/vehicle number: 562670-08-C, Offer 25488 Technical Data: - Band saw blade dimensions: 3320 x 27.0 x 0.9 mm Rjdpfxjy E Hv As Almscb - Infinitely variable cutting speeds: 15 – 100 m/min - Hydraulic material vice - Mitre adjustable left up to 60°, right up to 45° - Cutting capacity at 90°: - Round: 280 mm - Square: 260 mm - Flat: 330 x 260 mm - Cutting capacity at 45° left & right: - Round: 250 mm - 45° left, flat: 270 x 200 mm - 60° left, flat: 170 x 170 mm - Drive: 400 V / 2.2 kW - Coolant system - Chip brush - Weight: approx. 1300 kg - Space requirement: approx. W 1800 x H 1900 x D 1950 mm

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t Rcsdefg E Hyopfx Almjb SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min Rcedpsfg E H Eefx Almsb total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: new, Length: 1500 mm Rjdsfxu Tkopfx Almjcb 6 rollers made of tubular steel, width: 185 mm Diameter: 20mm Height continuously adjustable: 650 - 1030 mm Space requirement: 1500 x 250 x 650/1030 mm

Condition: used, Year of construction: 2013, functionality: limited functionality, cutting height (max.): 230 mm, cutting width (max.): 245 mm, total height: 1,680 mm, total width: 1,950 mm, overall weight: 1,000 kg, empty load weight: 1,000 kg, feed length Y-axis: 500 mm, saw band length: 2,950 mm, saw band width: 27 mm, section length (max.): 9,999 mm, space requirement height: 2,100 mm, space requirement length: 2,900 mm, space requirement width: 1,950 mm, table length: 2,800 mm, table width: 245 mm, working height: 890 mm, Further technical details can be found in the operation and maintenance manual, which will be provided upon sale. If you have any further questions, please feel free to contact us by phone or email. Rcjdpox Dirzjfx Almeb Best regards, Weber Geländersysteme

Condition: used, Year of construction: 2018, dimensions of saw-band 3650x27x0,9 mm speed 15/100 m/min capacity 90 degrees: round 280 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270x200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm total power requirement 2,2 kW vice 340 mm weight 1240 kg dimensions 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings; Single stroke 600 mm - repeatable to saw any length. Simple programming - Enter cutting length and quantity and press "START". - Electronic band tension control Rcedpfx Aloyvvmlomeb - Automatic monitoring of the cutting load by a servo-valve mounted directly on the cylinder - Rotation control of the belt with immediate stop in case of a blocked saw band Späneräumbürste and emulsion coolant pump as standard.

Condition: good (used), Year of construction: 2002, MEP automatic bandsaw Model Shark 320 AXI Year : 2002 Capacity round : 260 mm. Capacity 45 / 60 degrees : 230 mm. / 150 mm. Capacity square. : 320 x 220 mm. Speed: 40 - 80 m./min. Rjdpfxsyvzvxe Almscb

Condition: reconditioned (used), Used semi-automatic bandsaw MEP Shark 281 sxi evo Three operating modes: semi-automatic, manual, and manual dynamic (gravity) Blade dimensions: 2950 x 27 x 0.9 mm Redpfoyyn Suox Almscb Two blade speeds: 36/72 m/min Max vice opening: 285 mm Cutting capacity: at 0° round 250 mm, rectangle 280x200 mm at 45° round 190 mm, rectangle 180x180 mm at 60° round 120 mm, rectangle 110x110 mm Year: 2006 Weight: 435 kg Fully serviced.

Condition: new, Model Name Rcjdjgvkglspfx Almeb Shark 281 SXI evo

Condition: new, Model Name Rcodpfx Aol Sva Ielmob SHARK 331-1 NC 5.0 SPIDER

Condition: new, Model Name Rsdpsgvkafefx Almjcb Shark 332-1 SXI evo