Used Mbo T530 4 Tassen for sale (58,243)

Condition: used, Year of construction: 2006, MBO T530 Folding Machine 4 plus 4 cassettes with knife Nodpfx Aajxz A Abjaela Max. Paper Size: ~53 x 84 cm (or 530 x 840 mm) Min. Paper Size: ~14 x 15 cm (or 140 x 150 mm) Paper Weight/Thickness: ~35 to 250 g/m² Speed: Up to 40,000 cycles/hour (depending on job) or max 230 m/min

Condition: ready for operation (used), Round pile feeder Nsdpfxeq Ik Ruo Aaasla MC Digital control 1st unit 6 plates 2nd unit 4 plates A76 stream delivery

Condition: good (used), Size: 1.300 x 1.650 mm Speed: 150 m/min Equipment: feeder: • pallet feeder (MABEG) • counter MCC 3 1st folding unit: • separate deflectors • 4 buckle plates Nlsdpfx Aaodyk Rlsaja • rear-mounted slitter shafts • noise prevention 2nd folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention 4th folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention

Condition: good (used), Size max 460 x 650 mm min 105 x 150 mm Speed max 160 m/min Nodpfxjd Tndcs Aaaela Power requirements 2,3 kW (220/380V, 50Hz) Length 2.610 mm Width 1.100 mm Equipment feeder: flat pile feeder counter 1st folding unit: 4 buckle plates noise prevention 2nd folding unit: knife-folding unit delivery belt delivery

Year of construction: 1997, condition: good (used), Built in 1997 Size 1.300 x 1.650 mm Speed 150 m/min Equipment Nljdpfx Aaedymm Hoaea feeder • pallet feeder (MABEG) 1st folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 2nd folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention delivery • belt delivery

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: Nodpfoddh Evox Aaaela • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery

Condition: used, Year of construction: 2004, functionality: limited functionality, machine/vehicle number: N07/09, !!! SALE TO THE HIGHEST BIDDER !!! MBO Folding Machine T500-1-500/4F – 4 Buckle Plates – Industrial Folding Machine For sale is a folding machine manufactured by MBO Group, model T500-1-500/4F. This machine is ideally suited for print shops, lettershops, and finishing operations for the folding of brochures, leaflets, inserts, and other printed products. The robust construction of MBO folding machines ensures precise folding results, high reliability, and durable industrial quality. The buckle plate system enables a wide range of fold types to be carried out quickly and efficiently. Technical Data Manufacturer: MBO Group Model: T500-1-500/4F Machine Number: N07/09 Wiring Diagram: 35.1901.14 Folding System: Buckle Plate Folding Machine Number of Buckle Plates: 4 Max. Working Width: approx. 500 mm Application Area: Folding of printed products Possible Applications Brochures Flyers Inserts Folders Multi-page printed materials Condition Used, condition appropriate to age. Inspection Njdpfsyuc Rysx Aaasla Inspection of the machine possible by appointment. Further information available upon request.

Condition: used, machine/vehicle number: 980117384, Vertikalstapelauslage - Vertical Stack Delivery with Pressing and Marking Device MBO SAP46L Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Njdpfjh Axqfsx Aaajla Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Schuppenauslage - Stream delivery MBO AS540-DCSerial-No. Q02/93 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Nodpfx Aaeh Axqisaola Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1994, machine/vehicle number: 940114747, Falzwerk 3. Station Eigensteuerung / Folding Unit 3. Station SelfControl MBO T79-3-46/2Baujahr / Year 1994 - Serial-No. 940114747 2 Taschen Falzwerk / 2 buckles folding unit Arbeitsbreite max. 460mm / Working width max. 460mm Eigensteuerung / SelfControl Nachgelagterte Messerwelle / rear mounted slitter shaft Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Nedjilx Snopfx Aaajla

Condition: used, Year of construction: 1994, machine/vehicle number: 940114747, Stehendbogenauslage / Vertical Press-Stacker Delivery MBO SBAP 46-ME Baujahr / Year 1994 - Serial-No. 940114747 Arbeitsbreite mit ME max. 430mm / Working width with ME max. 430mm Nljdpfx Aaeik Snwoaja Bogenlänge / Sheet length min. 80mm Bogenlänge / Sheet length max. 300mm Stapellänge / Pile length max. 730mm Einlaufhöhe / Infeed height min. 380mm Einlaufhöhe / Infeed height max. 950mm Pressdruck / Pressure 20.000 N Mechanische Geschwindigkeit / Mechanical Speed max: 30 – 160 m/min Eigensteuerung // SelfControl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 5.972/121, infeed width: 550 mm, MBO T49, with gluing unit and additional 4-pocket unit. Available at any time. Nljdpfx Aaeytciysaea

Condition: used, Year of construction: 2007, Folding machine MBO Navigator T 800/442 Year: 2007 Description: - 16 page folder Feeder - Round pile feeder - Dualfeed - Pump Buckle folding unit: 1 MBO T800.1-1-78/4 - First buckle folding section with 4 buckle plates - Maximum infeed width: 78 cm - Perforating shaft - Anti noise hood(s) Buckle folding unit: 2 MBO T800.1-2-68/4 - Second buckle folding section with 4 buckle plates - Maximum infeed width: 68 cm Njdpjxd Dmysfx Aaasla - Perforating shaft - Anti noise hood(s) Buckle folding unit: 3 MBO T800.1-3-56/2 - Third buckle folding section with 2 buckle plates - Maximum infeed width: 52 cm - Noise hoods for upper folding buckles Delivery MBO SBAP-46-ME - Horizontal stack delivery with pressing and marking device

Condition: used, Year of construction: 2009, 1st Folding Unit 6 Buckles MBO Vario Control incl. touchscreen Flat pile feeder Working width 53 cm Spiral folding rollers in parallel fold with standard PU roller coating Stainless steel knife shafts, 30 mm Motorized folding rollers + MW adjustment VACUSTAR separation head Feeder extension to 100 cm (instead of 84 cm) 2nd Folding Unit Vario Control Working width 53 cm Spiral folding rollers Motorized folding rollers + MW adjustment Sheet monitoring with transfer table Nledpsxc If Rsfx Aaasa Including MBO Delivery A56 The ASP delivery shown in the photos is not included. Included is the A56 delivery as shown in the last photo.

Condition: good (used), Year of construction: 1996, functionality: fully functional, - Manufacturer: MBO - Model: K 820-4KTLT - Machine type: Folding machine (combination folder) - Format width: 82 cm - Typical application: High-performance folding for large printing sheet formats Nlodpfx Asxby Nxjaaja - Features: 4 folding pockets, KTLT configuration (combination of buckle, knife, and cross fold), high production speed, precise folding results - Areas of application: Industrial printing plants, finishing operations with large-format production

Condition: like new (used), Year of construction: 1999, Top maintained MBO folding machine with press delivery for sale directly from the print shop. The machine has four pockets and two swords. The folding rollers are in mint condition throughout the machine. The machine also includes a gatefold buckle plate. A video of the machine running in production can be sent upon request. Nsdpsk H Hm Asfx Aaasla

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, infeed width: 790 mm, MBO pocket folding machine with 4 pockets in the 1st unit, 4 pockets in the 2nd unit and 2 pockets in the 3rd unit, complete with MBO SAP 46 L delivery. Also available as a package together with an MBO K 74-6 KL folding machine with 6 pockets and 2 knives, including MBO SAP 46 L delivery. Package price EUR 1,950 loaded onto truck (FCA). Both machines fully functional and in operation, video available! Nsdpfx Ajxdq I Doaaela

Condition: ready for operation (used), MBO Folding Machines Nlsdpfx Aeir A Imsaaea MBO ET46 bump turn -1983

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis, stepped: * Special steel frame made from high-strength fine-grained steels, electrically welded at connection points * Generously dimensioned outer frame. 4-axle configuration * Wheel covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the stepped area for the longest possible low-bed length in combination with AluLeg drop supports instead of telescopic support legs, maximum rear swing clearance of the tractor unit approx. 2,100 mm Special body with rear stake extension: * DINKEL – special body * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable for loading/unloading up to approx. 4,200 mm * Three sliding stakes per side with elastic relief * Additional intermediate stake lockings in roof beam and parked position, via pull cable and spring bolt * DINKEL – mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments by adjusting the stakes * Front cover at bulkhead for driving operation under the tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, 450 pockets below, four rows of single pockets above. Only three rows of slats in the raised platform, spacings evenly distributed Floor: * Approx. 27 mm special waterproof bonded beech phenolic plywood, rough surface * Steel sheet in the wheel well area. Suitable for forklift traffic as per DIN standard * Outer frame flush with deck surface Brakes: * WABCO air brake system with EBS according to EC Directive 71/320, including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with mileage counter and axle load display * Including WABCO tire pressure monitoring system Nodpfx Aaewx Dbijaela Axles: * 4 x 10,000 kg SAF with drum brakes in low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tires: * 235/75 R 17.5, 16-ply. Make of our choice, including spare wheel holder * Without spare wheel Lighting: * According to EU regulations, including LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights on the inside front wall, upper section Paintwork: * Chassis and body in one color, RAL 3002 carmine red * Intermediate stakes, axles KTL-coated black * Corner stakes hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply cable * Air suspension in ECAS design, operated on the trailer * Oversize signage front and rear in galvanized, infinitely telescopic design with installed marker lights, including sockets for rotating beacons (small signs) * Additional external release for sliding roof frame lock * 4 stake adapters for special outer frame profile, to lock intermediate stakes as needed * PVC sliding tarpaulin, color similar to RAL 9

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Chassis, cranked * Special steel frame made of high-strength fine-grained steels, electric welded at connection points, well-dimensioned outer frame * 4-axle configuration. Wheel covers above the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodized aluminum * Increased point load capacity approx. 30,000 kg over approx. 4,000 mm * Special construction in the cranked area for the largest possible low-bed length in combination with AluLeg drop supports instead of telescopic spindle landing gears, max. rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stanchion extension * Self-supporting aluminum roof girder/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stanchions expandable to approx. 4,200 mm * Three sliding stanchions per side with rubber tension relief * Additional central stanchion latches in the roof girder and parking position, operable by pull cable and spring latch * Mechanical lifting roof with height adjustment, lifting roof height approx. 400 mm, operable from both sides or one side only, without opening the opposite side and doors * Additionally, height adjustment of approx. 480 mm in approx. 40 mm increments via height-adjustable stanchions * Front cover on the bulkhead for driving under tarp up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on each side, 450 mm pockets at bottom, four rows of single pockets above * In the high-bed only 3 rows of insertable slats. Intermediate distances evenly distributed Floor * Approx. 27 mm special water-resistant bonded beech multiplex boards, rough surface * Steel plate in the wheel arch area * Forklift suitable according to DIN ? standard * Flush outer frame surface Brakes * WABCO air brake system with EBS according to EC standard 71/320 EEC incl. PREV (Park Release Safety Valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and axle load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low loader design * Air suspension with lift and lowering function, total stroke approx. 230 mm * Third and fourth axle as friction-steered trailing axles with electric and mechanical lock Nlodpelthgujfx Aaasa Twin tyres * 235/75 R 17.5, -16 ply, incl. spare wheel holder, without spare wheel Paintwork * Chassis in RAL 3002 red, single colour * Central stanchions, axles KTL-coated black * Corner stanchions hot-dip galvanized * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Body single-colour in RAL shade Special equipment included * Air suspension in ECAS version, operation on the semi-trailer * Oversize signage front and rear, galvanized, stepless telescopic, with attached marker lights incl. sockets for revolving beacons (small plates) * Additional sliding roof frame release from outside * 4 stanchion adapters for special outer frame profile, for arbitrary locking of central stanchions * PVC sliding tarpaulins, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize and overheight specification, flat hooks, tarpaulin folds, closures with locking pawl/OCS * Rear left telescopic socket for warning beacon incl. light * Outer frame for machine transport with approx. 64 lashing poin

Condition: used, first registration: 10/2001, Year of construction: 2001, Nooteboom 4-axle container chassis, divisible into 2 sections - 1st section: 1 axle - 11,000 kg gross weight - 2nd section: 3 axles - 26,000 kg gross weight - ABS - Air suspension - 4 x BPW Eco Plus axles - 1st axle liftable - Raise/lower device - 2 support legs each at front and rear - Tyres: 385/55 R 22.5 - German semi-trailer - TÜV / inspection / SP: New on request and at extra charge! Njdpswmpa Hofx Aaasla Errors and interim sale reserved!

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 720 mm, Placing a bid obligates the buyer to collect the equipment on time, no later than 31/12/2025! The offer includes: - MBO R 700 Feeder (Serial no.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Delivery (Serial no.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial no.: 820-411, Year: 2002) - Bickel SGU Die Cutter (Serial no.: 033, Year: 1997) - MBO 3-Up Delivery for SAP 66-ME (Serial no.: 910913362) - Polar L-1000-W-3 Pallet Lift Table (Serial no.: 6072421) Nlsdpfxjxyhnys Aaaja TECHNICAL DETAILS Fold Plates Fold plates 1st folding unit: 6 (individually driven, removable sheet transfer) Fold plates 2nd folding unit: 6 Fold plates 3rd folding unit: 2 Infeed Width Infeed width 1st folding unit: 720 mm Infeed width 2nd folding unit: 720 mm Infeed width 3rd folding unit: 520 mm This machine comes with a gate fold plate (usable in units 1 and 2), as well as 2 separate sheet diverters and 1 auxiliary frame for setup. Units 2 and 3 are electrically height adjustable! Note: The MBO delivery unit is defective.

Condition: good (used), The Pieralisi Decanter is a high capacity horizontal centrifuge designed for industrial applications requiring efficient solid-liquid separation. The decanter is used for the separation of two or more specific phases of different densities, especially for the clarification of liquids in which suspended solids are present. The separation of solids and liquids takes place inside a cylindrical-conical rotating drum, where the heavier solid phase is collected on the periphery and continuously removed by an internal conveyor. Its key technical specifications are detailed below: Technical specifications: - Drum diameter: 470 mm - Maximum drum speed: 3,350 rpm - Drum ratio: 5.28 l/d - Typical applications: wastewater treatment, sludge separation, processes in the food and chemical industry. Nedpfswxwz Asx Aaasla

Year of construction: 2023, condition: used, functionality: fully functional, Schwamborn Floor Stripper FBS 40 FBS 40 — Year of manufacture 2023 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational Nedpfjy A Havjx Aaajla - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 1,490 plus VAT | EXW Einbeck | Delivery upon request

Year of construction: 2023, condition: used, functionality: fully functional, Schwamborn Concrete Processing Machine DSM 450 2,2 kW 400 V/50 Hz DSM 450 2,2 kW — Year of manufacture 2023 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Nlsdpfx Aajy A E S Roasa Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 2,300 plus VAT | EXW Einbeck | Delivery upon request