Used Kuka/ Spatz/ Omron/ Sick Robot Spot Welding Line for sale (18,279)

Condition: used, total power requirement:6,5 kW Fedpfecxxp Uox Afkogc dimensions of the machine ca.:0,9 x 0,5 x 1,25 m

Condition: used, Year of construction: 1992, machine/vehicle number: 920544, current capacity:100 kVA throat:280 mm capacity at 50%:100 kVA pressure:1,1 t Fjdpfx Afscxxwnjkegc stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R total power requirement:279 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,15 x 2,1 m spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off

Condition: used, Year of construction: 1960, Technical details: current capacity: 60 kVA throat: 680 mm arm distance: 115 / 415 mm pincer opening adjustable: 180 mm rated capacity: 60 kVA welding power: 71 kVA electrode capacity: 100 bis 600 daN voltage: 380 V / 50 Hz V air pressure: min./max.: 6 / 10 bar cooling water consumption: 12 l/min weight of the machine approx.: 685 + 200 kg connection voltage: 380 V / 91 A V rated capacity: 60 kVA connected load: 54 kVA dimension L-W-H: ca. Maschine: 1.700 x 850 x 1.750 mm dimension L-W-H: ca. Aggregat: 900 x 650 x 1000 mm POINT WELDING MACHINE - WELDING TRANSFORMER Direct current three-phase welding machine Application: Spot, projection and series spot welding Fsdpfju Nv Emsx Afkegc Maximum short-circuit power 89 kVA Primary short-circuit current 135 A Secondary current = short-circuit current: 25 kA and welding current max. 20 kA Electrode stroke max. 90 mm; electrode force min./max.: 100 daN / 600 daN Stroke sequence max. with 10 mm stroke 400 strokes/min. Spot fitting: electrode holder Ø 30 mm, adjustable 180 mm, arm distance = min./max.: 115 / 415 mm 2-fold foot switch Cooling unit, mobile = movable on wheels, connection power 1.45 kW, pipe connection R 3/4 inch, coolant R22 *

Condition: used, Year of construction: 2002, Technical details: x-travel: 1500 mm Fgjdpfx Aeu R Dfkofkoc z-travel: 1300 mm control: YASNAC XRC Steuerung total power requirement: 3,3 kVA Total weight, approx.: 3.200 kg Welding robot plant consists of: -welding rectifier MESSER, type Phoenix 500TG; MIG-MAG / TIG and E-welding up to 500A; air cooling; protection class IP 23 -Wire feed EWM, type Phoenix Drive 4 ROB WE, wire Ø 1,0 - 1,2mm, feed 0,5 - 24 m/min., protection IP 23 -MIG/MAG gas shielded welding torch BINZEL for wire Ø 0,8 - 1,6mm -Robot ERCS UP6-RE00 with control YASNAC XRC control, travels Y-way=1.500mm and Z-way=1.300mm, circular movement swivel=approx. 90° right/left, swivel radius=1.000mm, turn 360°, welding gun rotate 360° with projection max/min: 1.500 / 500mm -1x control cabinet L:900 x W:900 x H:2500mm -1x control cabinet ERCS-UP6-RE00, control 4.0 XRC, L:610 x W:800 x H:900mm -1x welding table L:4.400 x W:550 x H:1.100mm, with compressed air connection 10 bar, working area LxW 1.200 x 340mm, X-way 3.250mm. furthermore: 1x straightening station DETEC manufacturing (with working table and straightening unit) 1x butt welding station with feeding table i.D. *

Condition: used, Year of construction: 2006, Technical details: workpiece weight: 1,1 t control: RobAssist über makro-Technik / VME-Bus-CPU Rotary-table: Ø 800 mm Fgodpfx Afjvzq Hrokoc rotary table tiltable: 370° Grad table - tiltable: 115° Grad total power requirement: 35 kVA Total weight, approx.: 4000 kg dimensions L x W x H: Roboter: ca. 2,5 x 4,5 x 3,8 m dimensions electric cabinet: ca. 600 x 800 x x2200 mm dimensions L x W x H: Absaufanlage: ca. 0,7 x 0,8 x 2,7 m dimensions L x W x H: Drehmodul: ca. 1,4 x 1,4 x 1,1 m The system is currently in the technical department. Welding robot system consists of: -Gantry with robot: Reis Robotics, RVL20-16.3 kVA, stroke radius max. approx. 1600 mm, speeds = axis 1: 3 m/sec, axis 2: 185°/sec. Axis 3: 150° / sec., axis 4: 450° / sec., axis 5: 450° / sec., axis 6: 500° / sec, -2x columns: Column spacing 3300 mm, columns on base plate 900x900mm; columns Ø 350 mm -Turntable/tilt and turn module: Model RIS, type RDK11 Torque max. tilting axis = 4,200 Nm and turning axis 2,200 Nm Speed of tilting axis = 19° / sec. and turning axis 45° / sec. -Welding unit: Fronius, type TPS 2700; welding current range: MIG/MAG 3-270 A and electrode 10-270 A as well as TIG = 3-270 A; protection class IP 23 -Welding fume extraction: Teka, type DUST Buster DB-302 R, air volume flow max. 300m³/h, filter class Kategori C, filter area 2.2 m² -Cooling unit: Type FK 4000 R, power 2 kW, protection class IP 23, pressure 4 bar Equipment: -safety light barrier with transmitter and receiver Hand-held programming device *

Condition: used, Technical details: current capacity: 100 kVA Fsdpfeu Nv Eaex Afksgc throat: 600 mm arm distance: 600 mm control: Bosch Programmier-Feldbusse pincer opening adjustable: 240 - 540 interface: RS 485 voltage: 500 V connection voltage: 380 V air pressure: 6 bar cooling water consumption: 14 l/min weight of the machine approx.: 770 kg space requirements of the machine approx.: 1,5 x 0,95 x 2,1 m SPOT WELDING MACHINE - WELDING TRANSFORMER Application: Spot, projection and series spot welding 1 - 1000 Hz Lifting cylinder electrode force 11 daN PSI 6000 medium frequency inverter with integrated control function (50/60 Hz AC mains voltage) Electrode arm Ø 35mm Electrode holder adjustment 200mm (manual) Arm distance min. 240mm max.: 540mm Manual adjustment Operation via Rexroth IntraControl VCP05 control panel and foot switch incl. replacement electrodes (water-cooled) external Rittal water recooling unit SK3320.609 *

Condition: used, Technical details: number of controlled axis: 6 workpiece weight: 20 t operating time: 4290 h control: YASKAWA total power requirement: 35 kVA Total weight, approx.: 2000 kg dimensions L x W x H: Roboterschweißanlage: 2,7 x 1,1 x 2,0 m dimensions electric cabinet: L:700 x B:800 x H:2000 mm Robot specifications: -6 different directions of movement -payload max. 20kg -working curves: turning curve=1717mm, turning height=1417mm; turning width=2072mm -rotation axis arm: S-axis rotate=+/-180°, L-axis lower arm=+1550° / -110°; U-axis upper arm=+255° / -165° -rotational axes wrist: R-axis roll=+/-200°, B-axis pitch-swivel=+230° / -50°, T-axis rotate=+/-360° -rotational axis speed: S-axis and L-axis = 170°/s; U-axis 175°/s; R-axis and B-axis 355°/s; T-axis 525°/s -permissible torques: R-axis and B-axis=39.2 Nm; T-axis 19.6 Nm Welding equipment specifications: -Fronius, TIG welding, (DC and AC), 3 A/10.1 V - 300 A/22.0 V, water cooling, IP23 protection class. Table top unit specifications: -Table support Ø 600mm, rotate 360°, swivel 90° each right/left. Fsdpfeu Nwfbjx Afkjgc Details of the wire feeder: -Fronius, type KD 7000, feed 0,2 - 22m/min., protection IP23, voltage U1 230V Manual control unit Control cabinet i.D. *

Condition: used, Year of construction: 2017, Kuka KR 420 R3080 Industrial Robot (2017) 420kg max. load 3076mm max. range 2415kg weight control unit KR C4 (2014); handheld PLEASE NOTE: Tooling/moulds and any product related gripping tools are not included! Please note the items in this lot 29381-75 are simultaneously offered in the combination lot 29381-36 as a complete cell. The separate parts of the complete cell 29381-36 are offered as individual lots 29381-39, -40, -42, -45, -46, -47, -50, -53, -55, -59, -62, -64, -71, -75, -77, -78, -81, -85, -86, -87, -88, -91, -94, -97, -98, -104, -108, -111, -114, -120 Bidders can bid on the complete cell and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the cell either as a single lot or as individual lots. Successful bidders will be notified within 2 working days. Fodpfey Uxrzex Afkegc

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Fedpfx Afov Dxm Sekogc Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Fodjwypqlopfx Afksgc Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: used, DALEX Spot Welding Machine Type SF 204 Machine No. AZA/N-32865 Year of Manufacture 2010 Power at 50% duty cycle: 30 kVA Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Maximum welding power: 86.4 kVA Throat 500 mm Fgjdpfxeit Rq Ho Afksc Arm distance 350 - 500 mm Electrode force: 65 - 360 kp (short throat) Electrode force: 25 - 140 kp (long throat) Electrode arm Ø 45 mm Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Steel sheet 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 + 3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 volts Connected load 55.2 kVA Mains connection 400 volts, 50 Hz - Multifunctional welding control system with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling - Foot pedal operation - Water-cooled (cooling water requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with base) Weight 196 kg Very good condition

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Fgedpjhpf Iyjfx Afkjc Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Fgodpfxsycv Sao Afkoc Weight: 335 kg As-new condition

Condition: good (used), 2 used water-cooled spot welding machines Technical data: Max. welding output: 23.7 kVA Rated output at 50% duty cycle: 8 kVA Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Fgodpey Naq Isfx Afkoc Electrode force: 17 – 235 daN Cooling water flow rate: 4 l/min Weight: 85 kg per machine Price: 550,-- EUR net per machine Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Spot welding tongs Dalex Type 3011/2 Throat depth 250 mm Fedjy Inwgepfx Afkegc Rated power 2.4 KVA 380 Volt

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: PS1/9173/9169/2, type of input current: three-phase, input voltage: 400 V, overall weight: 775 kg, electrical fuse: 105 A, compressed air connection: 5 bar, This Schlatter PS 130 is a robust, industrial spot welding machine renowned for its reliability in metal welding applications. Fodpjy Snycsfx Afkogc

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* Fjdpfx Aoxrb Tgefkegc - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Fgsdpfxsyx Exvs Afkec

Condition: used, Year of construction: 2021, total height: 1,600 mm, total width: 1,500 mm, total length: 1,550 mm, load capacity: 22 kg, overall weight: 420 kg, KUKA KR 22 R1610-2 Industrial RobotApprox. 500 operating hours, serial number 1304963.6-axis industrial robot with 22 kg rated payload and maximum reach of 1,612 mm. Fsdpfxsy S Nkce Afkogc Dimensions (LxWxH) approx.: 1550 x 1500 x 1600 mm Control: KRC 4 Weight approx.: 420 kg Number of axes: 6 Range max.: 1,612 mm Carrying capacity: 22 kg Year of construction: 2,021 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Condition: ready for operation (used), Year of construction: 2014, ARO PAN 160 spot welding machine, including control cabinet and cooling unit -CE marking -Year of manufacture: 2014 -Welding power max. 328 kVA -Digital display & control cabinet / IBOX control system -Cooling unit / water-cooled Fsdpfx Afjy Umuqjksgc -Ideal for spot welding of steel / aluminum / stainless steel / titanium -Electrode wear compensation -Modularity: The system allows the integration of different welding heads and electrode arms -Foot switch Dimensions / Complete system L x W x H 2.5 x 2.5 x 1.8 meters / Weight approx. 1000 kg Errors and omissions excepted.

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 80kVA Fodpfewqmrnox Afkjgc Short circuit-current: 45,4kA Electrode force: 100-600daN / single stroke Throat depth: 350mm --- Weld control: MPS 100mono (8-times, 1-program) --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 63kVA Short circuit-current: 26,3kA Electrode force: 65-390daN / single stroke Throat depth: 450-750mm --- Weld control: MPS 15036 (5-times, 1-program) --- Extra Equipment: Fgsdsv T Unwepfx Afkoc - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 Fedpfx Ajuc Sw Aofksgc 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Fedey N Dukopfx Afkegc Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Condition: used, Year of construction: 2003, functionality: unexamined, ABB IRB 1400 M2000 Robotic Welding Cell – Suitable for Parts or Refurbishment – Ireland Location: Ireland Condition: Used Power: 400V, 3 Phase Complete ABB robotic welding cell featuring an ABB IRB 1400 M2000 6-axis industrial robot with controller, teach pendant, dual-station welding fixture and full safety enclosure. Originally configured as a production robotic welding system (Plant Ref: XRWO11). This system is suitable for refurbishment, retrofit, or breaking for parts and spares. Can be sold complete or dismantled and sold separately. Included in Sale: • ABB IRB 1400 M2000 6-Axis Robot • ABB S4C+ Controller Cabinet (400V 3-Phase) • ABB Teach Pendant • Dual-Station Welding Fixture / Positioner • Robot Pedestal Base • Full Steel Safety Enclosure / Welding Booth Robot Specifications: Model: ABB IRB 1400 M2000 Axes: 6 Reach: Approx. 1.44m Payload: 5–6 kg Repeatability: ±0.05 mm Manufactured in Sweden System is complete as seen in photos. Industrial used condition. Operational status not confirmed. Ideal for buyers looking for spare parts including robot arm, controller, drives, teach pendant, servo motors, or welding fixtures. Components can be removed and sold individually if required. Forklift loading available. Inspection welcome by appointment. Fgsdpfx Ajymd E Nefkjc Asking Price: €11,200 + VAT (or nearest offer) Enquiries welcome for complete system or individual components.