Used Kiefel Thermoforming Machine for sale (65,212)

Year of construction: 1982, condition: ready for operation (used), A vacuum thermoforming machine Adolf Illig with a Busch vacuum pump is available. Form dimensions X/Y: 500mm/350mm, max. forming depth positive/negative: 100mm/100mm, max. mold height: 100mm, vacuum pump: Busch R5. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/2600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Lrjdpfx Aiozqu Eyjger

Year of construction: 2022, condition: ready for operation (used), A small table-top vacuum machine (vacuum chamber machine) Italian Pack is available. Chamber dimensions X/Y/Z: 370mm/420mm/180mm, vacuum pump capacity: 16m³/h, max. utilization time per day: 5h. Documentation available. On-site inspection is possible. Lrodpfxswt A U Ro Aiger

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control Ljdpfx Aietndpzjgsrr in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Year of construction: 1990, condition: ready for operation (used), Two identical thermoforming machines DIXIE-UNION DV 2000 are available. Supply voltage: 380V, frequency: 50Hz, rated current: 20A, version with red CEE three-phase plug (3~). Machine 1 was still in operation until 2025. Machine 2 has not been in use for a longer period and is not complete, as relays were removed for spare parts. An on-site inspection is possible, not under power. Lsdpfxsylnz Sj Aigorr

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: 1345, Machine Type: Two-Roll Mixing Mill (Mischwalzwerk) Main Manufacturer: TROESTER MASCHINENBAU (Sontra, Germany) Year of Construction: 1981 Origin: Made in Germany (West Germany) Heating System: Integrated heating system, equipped with temperature sensors. Main Motor: EMOD (Herbert Odenwald Elektromotorenfabrik KG) Power: 45 kW (60 HP) Lsdpfx Aioyx Etgsgjrr Protection Class: IP 23 Current/Voltage: 88A / 380V (Delta) / 50Hz Speed (n1): 1465 U/min Gearbox (Transmission): Jahnel Getriebebau GmbH (Bochum) Type: D 450 SO Ratio: 16.4 : 1 Output Speed (n2): 89.3 U/min Oil Specifications: ISO-VG 320 Safety Features: Equipped with built-in temperature sensors for motor protection (Kaltleiter-Temperaturfühler 130°C).

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Manufacturer: CFS (GEA) Type: Compact 420 Year: 2010 Electrical connection: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 Year: 2010 with gas flushing including 4 format sets Lrsdertq I Eopfx Aigor Condition: very good The metal detector and Espera conveyor visible in the picture are not part of this offer. They are separate machines.

Condition: used, functionality: fully functional, ILLIG Universal Forming Machine Type UA 155 4g solo Lsdpoxlzqfefx Aigerr Technical Data - Siemens control system - Max. material size: 1500 x 1250 mm - Max. forming area: 1450 x 1200 mm - Max. tool height: 700 mm - Max. material thickness: 12 mm - Heating capacity: 96 kW - Total power: 105 kW - Electrical protection: 160 A - Vacuum pump capacity: 250 m³/h - Compressed air requirement: 6 bar Features - Top heater with 5-zone HTS control (700ºC) - Bottom heater with 5-zone HTS control (500ºC) - Cooling fan D06 - Table cascade - Vacuum cascade - Top punch - Includes ILLIG chiller and ILLIG temperature control unit

Condition: used, functionality: fully functional, Machine DU 1500 x 1000 x 620 T7 No. 98 15254 Lsdpfjxmgvcjx Aigsrr Plate size: 1000 x 800 mm, Draw depth: 620 mm Year of manufacture: 1998 Rated current: 238 A Total connected load: 164.5 kW Control system: Siemens OP 37 Equipment: • Loading/unloading machine • 6 cooling fans • Upper punch • Film sag control • Motorized adjustable clamping frame • Flash emitter • Heating pyrometer • Cooling pyrometer

Condition: used, Year of construction: 1990, Name: Used packaging machine (thermoforming system) Manufacturer: Adolf Illig Type: SB 53C - DIN Year built: 1990 Driving force: 1,24 kW Dimensions: L 1.600 x W 1.135 x H 2.710 mm Empty weight: 500 kg Technical doc.: Yes Message: Heating capacity: 4.5 kW (15 ceramic surface heaters) Vacuum system: Max. vacuum level 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Positive drawing depth: 150 mm Negative drawing depth: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (skin) Film roll core diameter: 70 mm Condition: Second hand Lredpfx Ajxm Sa Hjiger Price: By request

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, total width: 17,500 mm, total length: 68,000 mm, total height: 19,000 mm, overall weight: 5,500 kg, Universal and highly successful blister machine in the medium to high-speed category with intermittent platen sealing. Format range: max. forming film width: 300 mm max. web indexing ET: 280 mm max. web indexing MT: 97 mm max. punching width: 284 mm max. drawing depth: 10 mm for PVC / Materials: Forming PVC/PVDC/ACLAR Included in the price are the following configurations of the machine: - Numatic valves - Forming film unwind stand - Forming film buffer - Stock monitoring for forming material - Forming foil unwind - forming station for PVC foil - Splice detection for forming film - Heat monitoring control for heating and sealing stations - Parts for heat fume extraction without exhaust unit - Forming station without plug assist - ET Index station after forming - Fill Section with rotary brush and safety flap - Electrical preparation for SimTap 2i feeding system - Fill control inspection system VisioChrom-CV - Lid foil unwind - Stock monitoring for lidding material - Print registration via elongation (stretching device) of lid material. - Splice detection for lidding material with 2 sensors for inside and outside - Sealing station - Cooling station after sealing - Index after sealing - Embossing station Lrsdpfor Nv Icox Aigsr -MT index station - Punch station - cross blister outfeed Output: max. 600 blisters Index: max.280x284 mm Forming depth: max.10 mm

Condition: used, Year of construction: 2008, XYZ SMX 5000 CNC Vertical Turret Milling Machine With Prototrak SMX Control Table Dimension 1,930 x 355mm (4 'T' Slots). Maximum Table Load 850kg. Axis Travel 'X'=1,524mm, 'Y'=596mm, 'Z'=520mm. Quill Ø116mm. Quill Travel 127mm. Spindle Nose to Table 620mm. Spindle Centre To Column Face 520mm. Speed Range 40-5,000rpm (7.5kW Motor). Spindle Taper ISO40. Power Drawbar. S/No. 11100 (2008). Ljdszvp E Espfx Aigerr With Coolant System, Table Guarding, Work Light, Vertex Heavy Duty Vice (Jaw Width 205mm), Indexing Head 3 Jaw Chuck 200mm, Centre Height 170mm, 8 Drawer Steel Cabinet With Contents Of Spindle Tooling & Clamp Sets. Approx Overall Dimensions L5,805 x W3,143 x H2,690mm. Weight 3,100kg. Note: Machine Had Control Upgrade 2023.

Year of construction: 2022, condition: good (used), Machine is in good working condition. Still in production. Parts shown by hand not come. Lrsdpfx Aiozlaqdsgjr

Condition: excellent (used), Year of construction: 2002, Manufacturer GN Model 3625D Year 2002 Condition Used Stock Number 00043 Maximum forming area 915 × 635 mm (36" × 25") Maximum film width 965 mm (38") Maximum forming depth 125 mm (5") Material thickness Typically 0.2–1.8 mm (material dependent) Drive system Servo-driven platen and sheet transport Air requirements 6–8 bar (90–120 psi) Lrsdpfx Aioziw Rvjgjr Max output Up to 35–40 cycles/min

Condition: used, Year of construction: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station - Schleicher P03 control system - Automatic tooling infeed and removal function - Top heater with ceramic elements and 5-zone control Lrsdpfx Aioxlzrcsger - Bottom heater with ceramic elements and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal crossbars for use with fixed-format frames - Lower clamping frame for frame installation from below, central clamping via electric motor - Bottom table pneumatically operated, rapid/creep speed adjustable by percentage - Upper stamp rapid/creep speed adjustable by percentage - Pre-blow automation adjustable by percentage - Pre-vacuum adjustable by percentage - De-moulding automation adjustable by percentage - Sheet sag control by light barrier with support air - Six-fold cooling fan - Large front opening for tool changes - Vacuum pump Sheet Feeding - Automatic sheet feeding system - Finishing heater in feeding area for pre-heating or final heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustable transport width

Condition: like new (used), Thermoforming machine Stainless steel Compact and easy to use Up to 100 memorised programs Up to 10 cycles per minute 055 m³/h Power: 9.5kW Voltage: 400V / 50Hz / 3phs Lodpsxtp I Iofx Aigerr

Year of construction: 2014, condition: good (used), Used SEALPAC RE25 Thermoforming Packaging Machine (MAP/Vacuum) This SEALPAC RE25 thermoforming machine is a high-quality, industrial-grade packaging system designed for continuous operation in food production environments. Built in the Netherlands, SEALPAC machines are known for their durability, hygiene, and consistent sealing performance. This unit is in good used condition Technical Overview Model: RE25 Power: 3-phase (230/400V, 50–60 Hz) Power consumption: ~17 kW Compressed air: 6–7 bar Gas (MAP): 4–6 bar Film width: approx. 300–650 mm Max forming depth: up to 160 mm Machine length: approx. 8 m. Contact Us Get in touch for: Price Lsdpfxoyvr Irj Aigerr Inspection Additional details or videos

Condition: excellent (used), Year of construction: 1999, CFS 620 | Thermoforming Packaging Machine Brand: CFS Model: 620 Machine number: 625/0118 Year of manufacture: 1999 Lrjdoy Hl Ndjpfx Aigor Power supply: 230 V, 3 phase, 50 Hz Current consumption: 23/25 A Module dimensions: Main module: 3350 mm x 1300 mm x 1900 mm Additional module: 3300 mm x 1050 mm x 1100 mm The industrial CFS 620 thermoforming machine is an advanced unit designed for the automatic forming of packages from rigid or flexible film and for packaging food and technical products. The machine operates in a continuous cycle, performing the processes of lower film forming, filling, vacuum or protective gas flushing, sealing, and cutting of finished packs. Thanks to its modular design with a total length exceeding 6 meters, the unit offers a large loading area and high production efficiency.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs Lodpfx Aiezux Iysgerr

Condition: excellent (used), This conveyor belt machine is ideal for shearing the edges of small carpet samples. Lsdpfx Aeud Dqkjigsrr Diagram of K-50 The key component of the KS 50 edge beveling machine is our SE 50 cutting unit. The machine is designed with angle adjustment from 0° to 60°. The depth of cut is adjustable from 2 mm to 22 mm. The guide plate for carpet samples can be easily adjusted steplessly from 20 mm to 210 mm. Quick and easy adjustments can be made by releasing the locking lever. The conveyor belt is driven by a three-phase motor. The speed of the cutting motor and the conveyor belt is infinitely adjustable by means of frequency converters. Larger pieces of carpets are guided manually as they pass through. The cutting width is 50 mm.

Condition: used, Year of construction: 2017, Used 2014 XYZ SMX 5000 CNC / Manual Bed Milling Machine in lovely condition. Supplied with ProtoTRAK SMX Control, Electronic Handwheels, TRAKing & DXF File Reader, Power Drawbar, Fully Programmable Spindle Drive and Custom-Made Splash Guards. SPECIFICATION: TRAVELS: X Axis: 1,524 mm Y Axis: 596 mm Z Axis: 540 mm Maximum Daylight Under Spindle: 610 mm Quill Travel: 140 mm TABLE: Length: 1,930 mm Width: 356 mm T-Slot Width: 15.9 mm Maximum Table Load: 850 kg SPINDLE: Motor Power: 5.75 kW (7.5 HP) Speed Range: 40 - 5,000 rpm Taper: ISO 40 Quill Diameter: 116 mm Programmable Spindle Drive HEAD: Head Tilt Left: 45° Head Tilt Right: 45° CONTROL: ProtoTRAK SMX Conversational CNC Control Electronic Handwheels TRAKing Function EQUIPMENT: Power Drawbar Splash Guards GENERAL: Machine Weight: 3,100 kg Ljdpfx Aiozgwq Dogerr

Condition: reconditioned (used), > Top heating with small individual heaters controlled by toggle switches > Bottom heating with large heater > Top clamping system > Protective grille Lrjdpfefug Anjx Aigor > 4 cooling fans D05 > Pre-blowing and demolding automation

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: Ljdpfxezuxn To Aigerr 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2003031, total height: 1,550 mm, total width: 1,070 mm, total length: 1,670 mm, type of input current: AC, overall weight: 450 kg, input voltage: 220 V, Fully Servo Controlled Automatic Flow Wrapper / Pillow Packing Machine – KFD323 – Fully Working Fully automatic servo-controlled horizontal flow wrapping / pillow packing machine for sale. The machine is used, fully tested and in excellent working condition. It features a fully servo-controlled system, providing accurate and consistent control of product feeding, film movement, bag length and sealing. This is a high-speed industrial machine capable of running at up to 150 packs per minute, depending on the product, film and pack dimensions. The machine can be seen running and working before purchase, and a video of the machine in operation can also be provided. Main Specifications Model: KFD323 Machine Type: Automatic Horizontal Flow Wrapper / Pillow Packing Machine Control: Fully servo-controlled system Condition: Used – fully tested and working Production Year: 2020 Speed: 30–150 bags/min Power Supply: 220V / 50Hz Motor Power: 4.7 kW Heating Power: 2.1 kW Film Width: 80–370 mm Machine Weight: Approx. 450 kg Dimensions: Approx. 3670 × 1070 × 1550 mm Applications Suitable for high-speed automatic packaging of a wide range of products, including: Bakery products Biscuits and confectionery Food products Snack products Household products Hardware and components Medical/disposable products General consumer goods The machine produces professional pillow-style sealed packs and can be integrated into an existing production or packaging line. Condition The machine is fully operational and has been tested prior to sale. All main functions, servo controls, film feeding and sealing systems are working correctly. Lrjdpozt Ugvefx Aiger Ready to go straight into production. This is an excellent opportunity to purchase a fully servo-controlled high-speed flow wrapper at a fraction of the cost of a new machine. Viewing and inspection are welcome. A video showing the machine running is available on request. Please contact me for further information, additional photographs, videos, or to arrange a viewing.

Condition: used, Year of construction: 2022, functionality: fully functional, power: 2.2 kW (2.99 HP), travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 190 mm, overall weight: 2,000 kg, Description CNC milling machine (wood router), Schreinerei Bessler Holzfräse Speed 3021, with control console including monitor and keyboard. Specifications: Designation: CNC milling machine Type: Speed 3021 Serial number: 2022398 Operating voltage: 400 V Motor power: 2.2 kW Year of manufacture: 2022 Total weight: 2,000 kg X-axis travel: 3,000 mm Y-axis travel: 2,100 mm Z-axis travel: 190 mm Tool holder: ER20 Spindle speed: 1,000 to 24,000 rpm Working dimensions: 3,000 x 2,100 mm Overall (transport) dimensions: approx. 415 x 296 x 175 cm Lredpszvnazofx Aigsr Machine weight: 2,000 kg Configuration: Gantry construction with work table Control console on mobile unit Extraction hose included Condition: Used Dismantled

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Equipped with a PR-type coil unwinder. Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling maximum width 700 mm Lredetv Ivzspfx Aigsr maximum plate size 1000x700 maximum sheet thickness 10 mm We take care of dismantling and loading onto your truck, which is available for collection.