Used Injection Moulding Machines Over 5000 Kn for sale (76,359)

Condition: used, Year of construction: 1984, operating hours: 1,234 h, functionality: unexamined, machine/vehicle number: HE 1280, injection pressure: 160 bar, input voltage: 24 V, EPS MOULDING MACHINE - E.A HEITZ HE 1280 (WITH TOOLING). Rodpfxjy N S D To Ammju Industrial EPS (expanded polystyrene) steam chest moulding machine for production of foam packing components. Manufacturer: E.A Heitz (Germany) Model: HE 1280 - Towler Hydraulik Year: 1984 Type: Hydrulic EPS shape moulding press Control Voltage: 24V Max Pressure: 80/160 BAr Includes: Installed mould plates (multi cavity tooling) Material conveying unit (Con-Evator system) Hydrulic and steam system

Condition: good (used), Year of construction: 2007, Ref. no.: 18615 Manufacturer: DEMAG Type: IntElect 80/370-100 NC4 All Electric Year of construction: 2007 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Rodpfx Ajza Dc Usmmou Injection unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight: 45 g Injection pressure: 2000 bar Measurements and weight Dimensions: 4,3 x 1,3 x 2,3 m Machine weight: 4750 kg Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs. Motor System — Siemens MOTICS 3 Main Drive Motor · Water-Cooled Servo Motor The main drive unit that controls all clamping and injection movements with high precision. Plasticising Motor · Water-Cooled Servo Motor Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production. 5-Axis Full Servo Control The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems. NC4 Control System The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Manufacturer: ARBURG Type: 520 A 1600-400 All Electric Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this series include: Rodpfxjxf T I Ns Ammou * Fully electric drive for all main movements * High energy efficiency compared to hydraulic machines * Excellent injection and positioning accuracy * Quiet and clean operation (also suitable for medical applications) * Low maintenance requirements The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics. ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.

Condition: good (used), Year of construction: 2016, Ref. no.: 18657 Manufacturer: ENGEL Type: e-victory 440/160 CC300 ecodrive Hybrid machine Year of construction: 2016 Clamping unit Clamping force: 160 ton Opening stroke: 900 mm Mould height min.: 300 mm Mould height max.: 600 mm Platen size (h x v): 750 X 750 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 151 g Injection pressure: 2400 bar Measurements and weight Dimensions: 5,7 X 1,8 X 2,2 m Machine weight: 10200 kg Further information: Tie-bar-less + electric injection = maximum flexibility and precision ENGEL e-victory 440/160: This is a hybrid machine (servo-hydraulic + electric) How it works Rsdoy Ipgpspfx Ammsu Electric part: * Injection unit (screw movement) * Ensures very high precision and process stability Hydraulic part: * Clamping unit (mould closing) * Maintains clamping force efficiently without continuous energy consumption This system combines: * The precision of an all-electric machine * With the power and efficiency of a hydraulic system This is a modern servo-hydraulic injection moulding machine from the well-established ENGEL e-victory series, known for its energy efficiency, high precision, and tie-bar-less design. The machine has a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in industries such as automotive, medical, and general manufacturing. Key features: * Tie-bar-less design for maximum mould flexibility * Servo-hydraulic drive for high energy efficiency * Precise and stable processing performance * Compact footprint with a large mould installation area * Modern ENGEL control system The machine was manufactured in 2016 and appears to be in very good condition, both technically and visually, as can be seen in the pictures. Thanks to its tie-bar-less design, this machine offers clear advantages when working with large or complex moulds and ensures highly flexible production.

Condition: good (used), Year of construction: 2007, Ref. no.: 18616 Manufacturer: DEMAG Type: IntElect 80/370-100 NC4 All Electric Year of construction: 2007 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Injection unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight: 45 g Injection pressure: 2000 bar Measurements and weight Rodpfx Aezabkvemmsu Dimensions: 4,3 x 1,3 x 2,3 m Machine weight: 4750 kg Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs. Motor System — Siemens MOTICS 3 Main Drive Motor · Water-Cooled Servo Motor The main drive unit that controls all clamping and injection movements with high precision. Plasticising Motor · Water-Cooled Servo Motor Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production. 5-Axis Full Servo Control The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems. NC4 Control System The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Condition: used, Year of construction: 2013, operating hours: 29,000 h, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Rodpjppigdjfx Ammeu Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. Rodotpf N Uepfx Ammou - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm - Shot volume: 96.5 cm³ - Clamping force: 55T - Working hours: 24,210

Condition: good (used), Year of construction: 2010, Ref. no.: 18624 Manufacturer: WITTMANN BATTENFELD Type: EcoPower 180/350 UNILOG B6S All Electric Year of construction: 2010 Clamping unit Clamping force: 180 ton Opening stroke: 480 mm Distance between tie bars: 570 x 520 mm Mould height min.: 225 mm Mould height max.: 550 mm Platen size (h x v): 810 x 805 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 163 g Injection pressure: 2083 bar Measurements and weight Dimensions: 5,2 x 1,6 x 2,2 m Machine weight: 6800 kg Further information: Die Wittmann Battenfeld EcoPower Serie steht für hocheffiziente vollelektrische Spritzgießtechnologie, entwickelt für präzise Produktionsprozesse und stabile Fertigungsbedingungen. Alle Hauptbewegungen der Maschine werden durch Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Schließen und Auswerfen erfolgen vollständig elektrisch und ermöglichen dadurch eine äußerst präzise Bewegungssteuerung, hohe Wiederholgenauigkeit und stabile Produktionsqualität. Rodpfxoy Uiwhe Ammeu Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen kann die EcoPower Serie – abhängig von der Anwendung – Energieeinsparungen von ca. 60% bis 80% erreichen. Zusätzlich bieten die Maschinen eine reduzierte Wärmeentwicklung, einen ruhigen Lauf sowie eine saubere Produktionsumgebung. Die integrierte UNILOG B6 / B6P Steuerung ist bekannt für ihre benutzerfreundliche Bedienung, zuverlässige Prozesskontrolle und stabile Langzeitleistung. In Kombination mit der hochdynamischen Servotechnologie und dem vibrationsarmen Betrieb eignet sich die EcoPower Plattform besonders für technische Kunststoffteile, elektronische Komponenten, Automobilanwendungen und medizinische Produktionen. Die Wittmann Battenfeld EcoPower Serie zählt auch heute noch zu den zuverlässigsten und energieeffizientesten vollelektrischen Spritzgießmaschinenplattformen auf dem Markt.

Condition: good (used), Year of construction: 2010, Ref. no.: 18623 Manufacturer: WITTMANN BATTENFELD Type: EcoPower 180/350 UNILOG B6S All Electric Year of construction: 2010 Clamping unit Clamping force: 180 ton Opening stroke: 480 mm Distance between tie bars: 570 x 520 mm Mould height min.: 225 mm Mould height max.: 550 mm Platen size (h x v): 810 x 805 mm Injection unit Screw diameter: 30 mm Injection volume: 124 cm³ Shot weight: 120 g Injection pressure: 2823 bar Measurements and weight Dimensions: 4,8 x 1,6 x 2,2 m Rsdpfx Amjy Uiwbemou Machine weight: 6800 kg Further information: Die Wittmann Battenfeld EcoPower Serie steht für hocheffiziente vollelektrische Spritzgießtechnologie, entwickelt für präzise Produktionsprozesse und stabile Fertigungsbedingungen. Alle Hauptbewegungen der Maschine werden durch Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Schließen und Auswerfen erfolgen vollständig elektrisch und ermöglichen dadurch eine äußerst präzise Bewegungssteuerung, hohe Wiederholgenauigkeit und stabile Produktionsqualität. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen kann die EcoPower Serie – abhängig von der Anwendung – Energieeinsparungen von ca. 60% bis 80% erreichen. Zusätzlich bieten die Maschinen eine reduzierte Wärmeentwicklung, einen ruhigen Lauf sowie eine saubere Produktionsumgebung. Die integrierte UNILOG B6 / B6P Steuerung ist bekannt für ihre benutzerfreundliche Bedienung, zuverlässige Prozesskontrolle und stabile Langzeitleistung. In Kombination mit der hochdynamischen Servotechnologie und dem vibrationsarmen Betrieb eignet sich die EcoPower Plattform besonders für technische Kunststoffteile, elektronische Komponenten, Automobilanwendungen und medizinische Produktionen. Die Wittmann Battenfeld EcoPower Serie zählt auch heute noch zu den zuverlässigsten und energieeffizientesten vollelektrischen Spritzgießmaschinenplattformen auf dem Markt.

Condition: good (used), Year of construction: 2008, Ref. no.: 18621 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 All Electric Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. Rodpfsy Ub D Hex Ammsu The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18619 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 All Electric Year of construction: 2008 Clamping unit Redpfx Amoy Ub Dtsmsu Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 76 g Injection pressure: 2180 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: Die Sumitomo (SHI) Demag IntElect Serie gehört zu den hochpräzisen vollelektrischen Spritzgießmaschinen, die speziell für technische Kunststoffteile, Automobilanwendungen, elektronische Komponenten sowie anspruchsvolle Serienproduktionen entwickelt wurden. Alle Hauptbewegungen der Maschine werden über Direct-Drive Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Werkzeugbewegungen sowie Auswerferfunktionen erfolgen vollständig elektrisch und ermöglichen dadurch höchste Präzision, ausgezeichnete Wiederholgenauigkeit und maximale Prozessstabilität. Die IntElect Serie ist besonders bekannt für ihren niedrigen Energieverbrauch und ihre hohe Produktionspräzision. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen können – abhängig von der Anwendung – Energieeinsparungen von ca. 60 % bis zu 80 % erzielt werden. Gleichzeitig reduziert die geringe Wärmeentwicklung den Kühlbedarf und senkt die gesamten Betriebskosten. Die Maschine verfügt über ein direktes Servo-Einspritz- und Dosiersystem, das sehr schnelle Reaktionszeiten und eine hochpräzise Einspritzsteuerung ermöglicht. Die Spritzeinheit ist mit 4 Heizzonen ausgestattet und sorgt dadurch für eine homogene Plastifizierung sowie stabile Prozessbedingungen, insbesondere bei technischen Kunststoffen. Die wichtigsten Vorteile der IntElect Serie: * Vollelektrische Direct-Drive Servo-Technologie * Sehr geringer Energieverbrauch * Hohe Präzision und Prozesswiederholgenauigkeit * Geräuscharmer und vibrationsarmer Betrieb * Hohe dynamische Servo-Performance * Geringer Wartungsaufwand * Saubere Produktionsumgebung * Ideale Lösung für technische und Präzisionsteile * Geeignet für schnelle Serienproduktionen Die Sumitomo Demag IntElect Serie zählt aufgrund ihrer langen Lebensdauer, stabilen Produktionsleistung und hohen Energieeffizienz auch heute noch zu den gefragtesten vollelektrischen Spritzgießmaschinen am Markt.

Condition: good (used), Year of construction: 2012, Ref. no.: 18610 Manufacturer: DEMAG Type: IntElect 160/520-340 NC5 All Electric Year of construction: 2012 Clamping unit Clamping force: 160 ton Opening stroke: 495 mm Distance between tie bars: 520 x 520 mm Mould height min.: 275 mm Mould height max.: 585 mm Platen size (h x v): 760 x 785 mm Injection unit Screw diameter: 35 mm Injection volume: 156 cm³ Shot weight: 139 g Injection pressure: 2180 bar Measurements and weight Dimensions: 5,4 x 1,5 x 2,1 m Machine weight: 7600 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology Redpjy Ub Dmjfx Ammsu * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: not inspected (used), Year of construction: 2010, machine/vehicle number: 61015538, This Engel injection molding machine, model victory 1050/220 tech, manufactured around 2010, will be auctioned off in our online auction "Site Closure Wirthwein Friedberg GmbH & Co. KG - Machines, Tools, Workshop Equipment, etc." along with an MB Conveyors conveyor belt, manufactured in 2012, and a motan mixing unit, manufactured in 2024. You can find this and many other items from the field of injection molding technology, production & workshop equipment, temperature control units, lifting technology, eroding machines, measuring instruments, transport & social area equipment, etc. on our RESTLOS auction platform! Rjdsy Uzdaepfx Ammeu Engel injection molding machine Nameplate data: Manufacturer: Engel No.: 177100 Year of manufacture: 2010 (partially covered, presumably) Type: victory 1050/220 tech Weight: 12,200 kg motan mixing unit Nameplate data: Manufacturer: motan holding Designation: Mixing unit Model: Mixing module - 2l - MB Rated voltage (UN): 24 V DC Control voltage (Us): 24 V DC Current (IL): 2.7 A Max. weight (mmax): 8 kg Year of manufacture: 2024 Serial number (SN): 677A01A24 14293 RA: BM02A CE marking: present UKCA marking: present MB Conveyors conveyor belt Nameplate data: Manufacturer: MB Conveyors Model: N-CPR LOW-COST Year of manufacture: 2012 Registration No.: B20032 Voltage: 400 V CE marking: present as shown in the pictures without any other items shown in the pictures Functionality untested

Condition: not inspected (used), Year of construction: 2011, machine/vehicle number: 61015538, This KraussMaffei 350-2000 AX injection molding machine, manufactured in 2011, will be auctioned off, including a conveyor belt manufactured in 2023, in our online auction "Site Closure Wirthwein Friedberg GmbH & Co. KG - Machines, Tools, Workshop Equipment, etc." This and many other items from the field of injection molding technology, production & workshop equipment, temperature control units, lifting equipment, erosion machines, measuring instruments, transport & social area equipment, etc. can be found on our RESTLOS auction platform! Nameplate data: Manufacturer: KraussMaffei Injection molding machine type: KM 350-2000 AX International size designation: KM 2000 AX/350 Year of manufacture: 2011 Machine No.: 61015538 Machine weight: 22,600 kg CE marking: present Manufacturer: KraussMaffei Made in: Slovak Republic Nameplate data: Conveyor belt Designation: LIGHT CONVEYOR Model: CPT2021 ALL Year of manufacture: 2023 Serial number: C23690 CE marking: present Manufacturer: MB Conveyors srl as shown in the pictures without any other items shown in the pictures Redey Ux Hlspfx Ammeu Functionality not tested

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Rsdpfsy Au I Ujx Ammeu Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Redpexhfuaefx Ammou Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Redpswm Iy Ejfx Ammeu Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Rodeyiz U Tepfx Ammsu Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Manufacturer: FERROMATIK MILACRON Type: K-TEC -200 -1000 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 441 cm³ Shot weight: 395 g Injection pressure: 2268 bar Measurements and weight Rodpfx Amew Hc Spomsu Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg Further information: FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications. One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications. The K-TEC series is especially preferred for: • Thin-wall packaging products • Technical parts with fine surface details • Lid and container production • High-flow applications • High-speed serial production processes Advantages of the nitrogen-supported system: • Extremely fast injection performance • More stable pressure control • Better reproduction of fine details • Improved filling of thin-wall products • Shorter cycle times • High process stability The K-TEC series is also known for: • High repeatability • Sensitive mould protection • Low cycle times • Long-lasting mechanical construction • Suitability for heavy industrial operating conditions The machine was actively running in production until it was removed from operation and was working without problems until the very end. Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit Rodswm Iz Njpfx Ammou • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * accurate servo axis management Rsdewl Rucspfx Ammju The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Year of construction: 2002, condition: ready for operation (used), Clamping force: 1600kN, tie bar spacing: 570x520mm, platen dimensions: 810x805mm, max. mould diameter: 804mm, rotary table diameter: 735mm, min. installation height: 300mm, opening stroke: 650mm, opening force: 84kN, tie bar diameter: 80mm, max. daylight opening: 950mm, ejector force: 41.2kN, ejector stroke: 200mm, oil tank volume: 400l, standard drive power: 37kW, hydraulic operating pressure: 240bar, control system: Battenfeld Unilog B4, weight: 7.8t. An on-site inspection is possible. Redsy T Sdzjpfx Ammeu

Condition: used, Year of construction: 2021, operating hours: 14,650 h, clamping force: 1,100 kN, displacement volume: 350 cm³, injection pressure: 1,455 bar, overall weight: 60,000 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) Rjdpfsy R Eq Asx Ammeu delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 2009, condition: ready for operation (used), Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous sound pressure level: 74dB(A), length: 5700mm, width: 1700mm, height: 2200mm, weight: 11t, operating hours according to PLC: 36,734h, barrel heating: 25,665h, pump: 18,222h, documentation available. An on-site inspection is possible. A Wittmann robotic cell is also optionally available. Rsdpfxoy Tx Rbo Ammeu

Condition: ready for operation (used), Year of construction: 2002, operating hours: 66,160 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, displacement volume: 679 cm³, Injection unit: Screw diameter 60 mm Rjdsy Nk Uqspfx Ammju Ls/D ratio 21 Injection pressure 2000 bar Stroke volume 679 ccm Shot weight (PS) 618 gr. Injection rate 325 ccm/s Screw speed 259 1/min Plasticising rate max. 58 g/s Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 23 kW Adjustable barrel heating zones 6 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 12500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - 10-fold water flow regulator Additional Options: - 1 x Air valve - 3 x Core pulls - 4 x hotrunner controllers - Robot interface according to Euromap 67