Used Hosokawa Micron B.v. Schugi Flexomix Fxd-250 for sale (16,979)

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: sendzimir galvanized L-profile dim.: (see below) 298 x 81 mm (4 round holes Ø 9 mm) Iedpfx Aji Dtcnomletf 250 x 30 mm (one oblong hole) center-center round hole: 278 | 50 mm shelf distance: approx. 250 mm Weight: approx. 0,600 kg / pc. 04x hexagon bolts, M8 x 20 8.8. 04x hexagon nut, M8 04x washers, M8 General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Year of construction: 1988, condition: good (used), machine/vehicle number: 14684/1, suitable for copper cable and plastic recycling Itedpfonvdq Njx Amljf

Year of construction: 2014, condition: used, Manufacturer: Hosokawa Hosokawa Alpine Model: Contraplex 160 C Year : 2014 Type : pin mill + associated equipment Documentation : Hosokawa Alpine Contraplex 160 C Fine impact mill with two driven pin discs Itedpfxox R Avve Amlof Motor power (frame side) : 7,5 KW Pin speed (frame side) : 16 500 rpm Number of rows of spindles (frame side) : 3 Motor power (door side) : 5,5 KW Pin speed (door side) : 12 000 rpm Number of rows of spindles (door side) : 2   Powder transfer Bohle MCL 300 container + stand Forced convection vacuum system Unloading hopper Handling trolley  

Condition: used, Year of construction: 1986, Format: 0x0 Itjdpfx Ajyf Iipemljf

Condition: refurbished (used), Hosokawa Mikropul ACM 10 fine mill / classifier mill with new control cabinet and accessories We are offering a Hosokawa Mikropul ACM 10 fine mill in very good condition - an ideal solution for the precise crushing and classification of powders and granules. Technical data: • Model: ACM 10 • Motor power: 9.2 kW Isdpevn Riasfx Amletf • Condition: Very good condition (refurbished), with newly built control cabinet Additional details: • Classifying sieve available: A subsequent classifying sieve is also in stock. • Comparable mills: We have similar/analog mills in stock that work on the same principle as the ACM 10. Advantages of the ACM 10: • Compact design: Saves space in production • Energy efficient: Optimized for lower power consumption • Flexible use: For processing chemicals, food, pharmaceuticals and more Condition and inspection: The machine would be ready for use quickly and can be inspected by arrangement. We also offer technical accessories and spare parts for seamless integration into your production. Contact us for more information or a customized offer.

Condition: like new (used), Year of construction: 1991, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 250 t, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, punching force: 250 t, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Itsdpfxsu Dxb To Amljf Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: excellent (used), Classifier Mill Hosokawa Powderplex APP 400 Grinding and classifying Drive power 37 kW Iedpfx Aehbq Uromlotf Motor speed 3000 1/min pressure shock resistant up to 10 bar-Ü additional classifier wheel Very good ready to use condition, directly from production!!!

Condition: used, Hosokawa Mikropul ACM 2/3 classifier mill used, with suction filter, suction cooler, fan, cyclone, piping, Ijdpfx Ajvcmc Eemlstf unfortunately the filter is missing

Condition: excellent (used), Stair Tensioner (28366) Clamping height 200 - 250 mm T grooves width 12 mm Ijdpjln Ulaofx Amlstf Clamping screw M 10 4 pieces available Weight 8,5 kg

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Itsdpfx Asvdu N Ajmlof

Condition: ready for operation (used), Year of construction: 1998, Tank volume: 350l, permissible operating pressure: 6bar, permissible operating temperature: 90°C, motor manufacturer: Röchling, motor type: A3, fluid grease quantity: 1kg. Itedst R Trxspfx Amlof

Year of construction: 1990, condition: ready for operation (used), Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible. Itedpfx Ameuzlg Djlsf

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11383, type of input current: three-phase, working range: 3,000 mm, overall weight: 17,000 kg, input voltage: 400 V, cutting speed: 2,000 mm/min, total width: 4,500 mm, total height: 5,500 mm, total length: 22,400 mm, track width: 1,400 mm, repeat accuracy: 1 mm, workpiece weight (max.): 30,000 kg, warranty duration: 6 months, input frequency: 50 Hz, open-circuit voltage: 400 V, ambient temperature (max.): 45 °C, Secondhand SPC3000 - HGG Profiling Equipment B.V. Are you ready to automate your workflow, but not ready for a heavy investment in pipe cutting machinery? We have an interesting opportunity for you. This 2014 SPC3000 (40 Ton) pipe cutting machine is highly versatile. The machine is capable of cutting pipes from 300mm - 3000mm diameter and is equipped with a lot of extra features: - 4x 10 Ton pipe trolleys (300-2500 mm OD) (1 of them is a driven pipe trolley) Itodpfsri Slmox Amlsf - 2x 20 Ton pipe support (2500-3000 mm OD) - Plasma marking system Kjellberg Finemarker - Punch marking system - Can handle 18 meter long pipes - Plasma cutting system Kjellberg FF450 - Oxyfuel cutting process - Additional touch screen remote control attached to main drive - 3 Point fume exhaust system The SPC3000 is used by our eXperience Center and maintained by our best engineers at our headquarters in The Netherlands. The machine has a proven record and is used to profile pipes for clients in several high demanding industries f.i offshore, piping, structural steel and the vessel industry. A lot of special projects have been profiled on this machine.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Iodpfx Amovf E Avjletf Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, Vise jaw width 200 mm Jaw height 80 mm Isdpfodd Tpiex Amlotf Plate: Width below 250 mm Less than 500 mm length Opening width 250 mm Weight 72 kg

Year of construction: 2024, condition: new, The Agricracker AC200 is a milling machine for structure milling. Grains, beans & seeds are welknown applications. Even as fet and wet products, which are better grindable then known milling machines. Iodpeg Ugbrjfx Amlstf Capacity 0-8 ton / hour. Flyer at the bottom of this page. Milling trials are possible.

Year of construction: 2024, condition: new, The Agricracker AC100 is a milling machine for structure milling. Grains, beans & seeds are welknown applications. Itedjg Ugbgjpfx Amlsf Even as fet and wet products, which are better grindable then known milling machines. Capacity 0-3 ton / hour. Flyer at the bottom of this page. Milling trials are possible.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Itjdjwzvzyspfx Amlef Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Itjdpfx Aovzkylomljf Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). Ijdpfow Uf Tkox Amlotf The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Year of construction: 2021, condition: new, Hosokawa Alpine Mikropul ACM and ZPS spare parts for your mills ACM 2 - ACM 150 or ZPS 100 to ZPS 630. Other manufacture or types on request. Isdpfx Aogn Edlsmletf We are able to deliver spare parts like: Classifier wheels, Liner, complete Bearing Assembly ( new or overhaul ), hammer with carbide face, shroud ring

Condition: good (used), Year of construction: 1991, Used Hosokawa MikroPul filter Model Type 8 HP VC 1200-325 Itedpjufy S Hefx Amljf Volume 9980l Weight 2200kg

Year of construction: 2000, condition: good (used), Hosokawa Mikropul ACM 30 mill - disc motor 30 KW - classifier motor 7,5 KW weight: 800 kg dimension: 1,5 x 0,6 x 1,4m height Itsdpfxsbichus Amlof The mill is ready for opertaion!

Year of construction: 1986, condition: good (used), machine/vehicle number: 2057, Hosokawa Alpine ZPS 315 classifier mill Universally applicable for materials up to a Mohs hardness of approx. 3.5 with requirements for very high final fineness with the lowest possible energy input. Classifier mill for high finenesses, cool grinding and flexible production parameters in the fineness range from less than 5 µm to 200 µm Iodsqi Hhpspfx Amlstf Impact beater mill with Turboplex classifier integrated in the upper section for precise particle size limitation Welded construction, grinding tools made of special steel The mill is available complete with accessories, such as: suction filter, rotary valves, cyclone, filter, fan, piping, control cabinet