Used Homag - Ligmatech Cabteq S-200 - Mph410/25/07 for sale (83,683)

Condition: used, Year of construction: 2023, operating hours: 489 h, Homag EDGETEQ 300 The machine will be available from approximately the end of December 2026. For further information about the machine, please see the images or feel free to request it. Chsdez D U A Aepfx Ad Ijc

Condition: good (used), Year of construction: 1997, Transfer press REIS TUS 180 S-200, serial no. 04.027.00, year of manufacture 1997, pressing force 2,000 kN, weight approx. 48 tons. Chedpfxoz Icbhj Ad Isc

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: Csdpfxodt Rgvo Ad Iohc VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER - Min/max edges (band) thickness in rolls mm 0,3 - 3 - Min/ max panels thickness mm 12 - 40 - Min /max working width mm 250 - 2500 - Numerical Control: Power Control PC 22 - Feeding speed (adjustable) m/min 10 - 32 - Top motorized pressure belt - Anti-sticking liquid spraying unit - Pre-Milling Unit (Vertical joint trimmers) 2 x Kw 4 at 9.000 RpM - Glueing Unit (Hot Melt + Quick Melt system): A3 - Pressure Zone (manual adjustment): "A" - Edge coils supporting unit with N. 2 coils - Snipping Unit: HL 84 (2 x Kw 0,22 at 12.000 RpM) - Fine Trimming Unit (2 x Kw 0,4 at 12.000 RpM) - Finish processing unit (Glue scraper + Buffing unit): FA 11 Cedjwk Hp Topfx Ad Iohc - Spraying & polishing unit

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Freight basis: ex-works Chsdpfewz R Iujx Ad Isc

Condition: like new (used), Year of construction: 2016, machine/vehicle number: 0-250-11-2627, functionality: fully functional, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, workpiece weight (max.): 60 kg, number of axes: 3, total height: 2,500 mm, total length: 2,500 mm, overall weight: 3,200 kg, table width: 4,740 mm, Equipment: CE marking, documentation/manual, HOMAG / WEEKE OPTIMAT BHX 200 CNC – Year of manufacture 2016 – HSK63 9 kW – Clamex-P – automatic tool changer – extensive equipment We are selling our HOMAG / WEEKE OPTIMAT BHX 200 vertical CNC machining center, manufactured in 2016. We purchased the machine directly from HOMAG Polska in 2018. Before the purchase, the machine was presented at a trade fair in Germany. It was exhibited with a very extensive range of equipment, which was one of the main reasons for our purchase. Originally, we planned to integrate the BHX 200 into our production line as part of further automation by connecting it to an industrial robot. Ultimately, we did not receive EU funding for this investment. At the same time, our current production volume is not large enough to utilize the full potential of this machine. This is also evident in the relatively low operating hours. For this reason, we have decided to sell the machine. The BHX 200 has served us reliably for many years and is still in continuous production today. We use it to manufacture furniture components from sheet materials. The machine operates very precisely and reliably and is ideally suited for flexible furniture production. This is not a basic BHX 200 with standard equipment. The machine has a very extensive configuration for drilling, milling, grooving, and hardware processing. Equipment: * Vertical drilling head V15 High Speed with 15 individually controlled spindles * 6 horizontal drilling spindles in the X-axis * 4 horizontal drilling spindles in the Y-axis * Additional vertical 3-spindle drilling head for hardware * HSK63 milling spindle * Power up to 7.5 / 9 kW * Speed range 1,250–24,000 rpm * Automatic tool changer * Automatic pick-up tool magazine with 4 positions for HSK63 tools or units * Special unit for Lamello Clamex-P * Unit for grooving in the X and Y axes * Optical workpiece control in X and Y * Automatically positioned workpiece clamps * Automatic adjustment to workpiece thickness * Integrated 1D/2D barcode system including wireless Datalogic barcode scanner and base station Workpiece dimensions: Length: 200–3,050 mm Width: 50–1,250 mm Thickness: 8–80 mm Maximum workpiece weight: 60 kg Control system and software: * HOMAG powerControl / powerTouch * 21.5" Full-HD touchscreen * woodWOP * DXF Import Basic * Tool database * Production list management * woodScan * Ethernet Codpfjzzxzmox Ad Ishc * UPS * ECO Plus * Climate control for the control cabinet The particular strength of this machine lies in its versatility. It is particularly suitable for manufacturers who produce many different types of furniture, sizes, and small to medium batch sizes. The combination of vertical and horizontal drilling, milling, grooving, Clamex-P processing, and automatic tool changer allows a very large number of machining steps to be performed on a single machine. The machine is available immediately. We are confident in its very good technical condition. It is still in use in our production. An inspection and demonstration of the machine in operation can be arranged by appointment. Location: Białystok, Poland.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya10, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Chsdjz Ipunspfx Ad Isc Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Chodpfxjwlkcas Ad Isc Payment terms: 100% before takeover of the machine, net

Condition: excellent (used), I am offering for sale an original DELO DELO-UNIPRO controller, designed for industrial adhesive dispensing and curing systems. The device is fully functional – it powers on correctly, the display works, and the menu is clear and fully operational (as shown in the pictures). The visual condition is very good, with only minor signs of normal use. Technical specifications: • Manufacturer: DELO • Model: DELO-UNIPRO • Part number: 95 200 01 • Serial number: 1501 UNI 648 • Power supply: 100–240 V AC • Frequency: 50–60 Hz • Power consumption: 40 W Cedpfxozrv Hzj Ad Ishc • Interfaces: RS232, CAN, USB, Ethernet, Input/Output, Foot Switch, and 4 channels (CH1–CH4) Included in the set: • DELO DELO-UNIPRO controller The item being sold is exactly as shown in the pictures.

Condition: like new (used), Year of construction: 2017, S&F Oscillating Screen | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screening area: 2.0 m² per screen mesh size Screening decks: 1 piece Mesh size of the screen: - 1. screening deck: punched perforated plate screen, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Model: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 3000 Flame Red incl. 1 piece Modular silo type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Item no.: 406.4345 Incl. extension feet L = 1,100 mm Incl. hopper attachment and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Cedpjy Aa Ugsfx Ad Ijhc Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: refurbished (used), S&F Oscillating Screen | Screening Machine Type ASM-200 reconditioned | refurbished with new screen box, new bearings (flange bearings) and new vibration elements (rubber buffers) Chsdpfszbvy Isx Ad Isc Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2004 Screening capacity: approx. 25 m³/h (for wood chips, depending on material) Fractions: 3 Screening area: 2.0 m² per screen mesh size Screening decks: 2 pieces Mesh size of the screen: - 1st screening deck: punched perforated plate screen, D = 40 mm or as per agreement - 2nd screening deck: punched perforated plate screen, D = 8 mm or as per agreement Drive power: 1,5 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 7040 Window Grey // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: new, KSB Centrifugal Pump ETANORM SYT ETNY065-040-200 NEW 2024 25.6 m3/h 46 m For sale: high-quality centrifugal pump from the renowned German manufacturer KSB, model ETANORM SYT ETNY065-040-200. The unit is brand new, unused warehouse stock, in original KSB packaging. Perfect for industrial applications in water installations as well as heating and cooling systems. TECHNICAL DATA Manufacturer: KSB Model: ETANORM SYT ETNY065-040-200 Capacity Q: 25.6 m³/h Head H: 46 m Rotational speed: 2,950 rpm Impeller diameter: 187 mm Casing material: EN GJS 400 15 Year of manufacture: 2024 Flange connections CONDITION New, unused, warehouse stock May have minimal storage marks Original KSB packaging APPLICATIONS Chedoywu Uqspfx Ad Ioc Industrial installations Water circulation pumps HVAC systems Heating and cooling installations Pumping stations

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Chsdpjy Rnr Aofx Ad Isc Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: used, Year of construction: 2005, feed rate X-axis: 60 m/min, plate length: 2,500 mm, plate width: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! Cjdpfsz Ekfcex Ad Ishc TECHNICAL DETAILS Maximum plate width: 1,200 mm Maximum plate length: 2,500 mm Minimum plate width: 220 mm Minimum plate length: 250 mm Maximum feed rate: 60 m/min EQUIPMENT 90° transfer conveyor CE safety compliance The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 5981

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Chedpfx Aey Exwfed Isc Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: excellent (used), HOMAG EDGETEQ S-380 edge banding machine Top-mounted material pressure beam, liquids Pre-milling cutters, Glue application, Preheating unit with glue pot Pneumatic preliminary trimming unit, pressure rollers liquids Final trimming saws, R1-R2 top-bottom milling unit 2x R1-R2 corner rounding unit Multi R1-R2 profile trimming unit Flat trimming unit, Liquids Polishing unit, Grooving unit Nesting The machine features NC control; all settings and operations are performed from the control panel. Maximum part height: 60mm, Maximum reel edge band thickness: 3mm, Feed rate: 8-18m/min Chjdpfx Aezmgh Sjd Iec The machine is in very good condition and is almost as good as new. Operating hours: 535h

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-261-71-2124, functionality: fully functional, total length: 6,075 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, The edge banding machine, after a complete overhaul, will be available at the end of October. Chedpfxjz A Tf Tj Ad Ioc TECHNICAL DATA: Element feeding and removal ■ Pressure beam with pressure belt ■ Preparation for connecting a return system ■ Variable feed rate: 8-18 m/min ■ Automatically adjustable groove guide, height of the pressure beam, and pressure zone Edge banding ■ QA65 glue pot ■ EVA pre-melting unit: 8 kg/h Element finishing ■ Anti-adhesive and cleaning fluid ■ Corner rounding unit with a double profile FLEXTRIM ■ Trimming unit ■ Multifunctional unit for profiling with R-2 and R-1 tools ■ Edge milling unit with R-2 and R-1 tools ■ Flat profiling, polishing unit (top and bottom) Documentation ■ Selected languages: Croatian, German, English ■ Format: Data carrier + paper documentation General information ■ Control system: HOMAG POWERTOUCH control system ■ CE marking: YES ■ Operational status: end of October ■ Machine length: 6075 mm ■ Year: 2018 ■ Total processed length: 2.5 million meters

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. Chodpfx Aozr U Ausd Ijc - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Technical Specification Counter Spindle Yes

Year of construction: 2009, condition: ready for operation (used), Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous sound pressure level: 74dB(A), length: 5700mm, width: 1700mm, height: 2200mm, weight: 11t, operating hours according to PLC: 36,734h, barrel heating: 25,665h, pump: 18,222h, documentation available. An on-site inspection is possible. A Wittmann robotic cell is also optionally available. Chsdpfey Tx Rbjx Ad Isc

Year of construction: 2015, condition: excellent (used), vertical automatic flat glass sand blasting machine with 4 air guns working height : 2000 mm OPEN TOP Cedpfx Aoz Dt T Tjd Iehc including air compressor and dryer . voltage : 230/400 V 50 Hz

Condition: good (used), Year of construction: 2001, functionality: fully functional, double-head cutter with pre-scoring, chipping, 4 milling cutters, and edge finishing belt for both the right and left sides. Codpfey U Inxox Ad Ijhc Maximum working width: 2500 mm.

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Processing interval: automatically time-controlled Motor power: 3 kW Speed: 9,000 rpm Edge processing Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Brushing unit Number of motors: 2 Spray device: available MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Chsdpfx Adsz Ekbkj Ijc Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 11,726 h, load capacity: 300 kg, fuel type: electric, battery capacity: 500 Ah, battery voltage: 80 V, tire condition: 25 %, front tire type: superelastic tires (black), front tire size: 21 x 8 - 9, rear tire type: superelastic tires (black), rear tire size: 7.00 - 12, overall weight: 4,000 kg, total length: 3,000 mm, total width: 1,300 mm, fuel: electricity, STILL R 07-25 – Tow tractor Cjdpsz I Ah Ujfx Ad Iehc TECHNICAL DATA Lifting capacity: 300 kg Drive: Elektro 80V Battery: 80 V 500 ah v. 2024 Charger: 80 V 90 A not tested Tyres: Superelastik 21 x 8 - 9 %) / 7.00 - %) Service weight: 4.000 kg Length: 3.000 mm Width: 1.300 mm Year of manufacture: 2011 Operating hours: 11.726 h Condition: working condition Internal no.: 1309315 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 1990, condition: excellent (used), I sell the turning device HOMAG TD31/25/13. Chjdektfvfjpfx Ad Isc Year 1990. One side feeding suitable for line. Element width 1250 + 1250mm Total length 6500mm Available immediately. Ready for work, possible to test. With full manuals.

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: Chjdpfjnzhxqox Ad Ioc A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor