Used Hess Kp 2 Pneumatisch for sale (78,464)

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Gedpst Tqy Esfx Ag Tsuh Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Year of construction: 2022, condition: new, Service – Preparation of a quotation for a powder coating system from the company Romer. Directly from the manufacturer romer-deutschland Gjdpfx Ajfnk H Sog Tsuh Manufacturer of powder coating systems and industrial ovens, plant engineering Delivery time approximately 10 to 16 weeks. Shipping costs will be calculated separately.

Condition: repair required (used), Year of construction: 1989, machine/vehicle number: 426578, functionality: unexamined, power: 16 kW (21.75 HP), input voltage: 380 V, input current: 32 A, input frequency: 50 Hz, number of axes: 5, number of slots in tool magazine: 24, controller manufacturer: Num, total height: 3,000 mm, total length: 10,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, table length: 7,000 mm, table width: 2,000 mm, We offer this used MAKA KPF-6200 machining center, manufactured in 1989, as a source of spare parts. Type: KPF-6200 Machine No.: 426578 Year of manufacture: 1989 Pneumatic pressure: 6 - 8 bar Hydraulic pressure: 180 bar Rated voltage: 380 V Rated frequency: 50 Hz Control voltage: 24 V Rated power: 16 kW Rated current: 32 A Wiring diagram no.: 3.96 - 123 Condition: in need of repair (used) Functionality: untested Tool changer in need of repair Gedpfsz Hlhnjx Ag Tjuh without milling cutters Sold as a source of spare parts The Num control unit with the switch cabinet is still functional. If you have any questions or require further information, please send us a message or call us.

Condition: like new (used), Year of construction: 2014, Advertisement description CATALOG NO. 6526 TECHNICAL SPECIFICATIONS - track width 300mm - shaft width 300mm - max blade diameter 350mm - disc bore diameter 70mm - max cutting height 120mm FROM TOP: - 2 rows of ratchets - smooth pressure shaft, sliding - pawls - smooth, slipping, pressing roller Guodpfjudhzyox Ag Tjh - saw shaft - 3 smooth pressure, slipping shafts Bottom: - guide - pawls - track - infinitely variable speed feed - main motor 45kW - feed motor 1,5kW - central lubrication - diameter of the extraction stub 180mm - dimension of table top 1900x870mm - dimensions L/W/H 2540x1520x1600mm - weight 2000kg - possibility to check on the spot purchase and transport

Condition: used, Year of construction: 2000, table width: 2,700 mm, table length: 3,300 mm, total length: 3,800 mm, total width: 1,000 mm, total height: 2,700 mm, overall weight: 2,000 kg, No. 04544 Perforated plate press Hess JULIA Used, year of construction 2000 Dimensions of the perforated plate 3300 x 2700 mm LW 4 manual hydraulic cylinders (2 in need of repair) Gjdsy E N Izepfx Ag Teuh 12 pneumatic cylinders (2 magnetic and with angle adjustment) Transport dimensions approx. 3800 x 1000 x 2700 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm Guedszrpulopfx Ag Teh capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, This listing is for the Leibherr Mediline LKPv 6520 Refrigerator The unit is in full working condition and is ready for immediate use Overview: Liebherr LKPv 6520 MediLine Laboratory Refrigerator Guodpfxoxhfiqo Ag Tsh The Liebherr LKPv 6520 MediLine is a high-performance laboratory refrigerator crafted for the demanding environments of hospitals, pharmacies, and research labs. Here's a comprehensive breakdown of its features and specifications: Key Specifications Type: Lab refrigerator with professional electronic (Profi) controller Dimensions: 216 cm (H) × 70 cm (W) × 83 cm (D) Capacity: Gross: ~602 L Net: ~430 L Temperature & Cooling Temperature range: Adjustable from –2 °C to +16 °C Cooling system: Dynamic (forced-air) cooling ensures rapid and even temperature distribution Temperature control & accuracy: Electronic controller with digital display Precise 1-point temperature calibration (increments of 0.1 °C) Compliant with EN/IEC 60068‑3 temperature stability standards

Condition: good (used), Programming terminal KP-Qume QVT52 III consisting of: Mobile PC, Type: KP-Qume QVT52 III Screen diagonal: 14" (35.5 cm) Picture tube: Flat, white phosphor Screen display: 24 lines / 80 or 132 characters / 1 status line / 1 user line Character display: - 80 characters: 14 x 15 matrix in a 16 x 16 cell or 14 x 12 matrix in a 16 x 13 cell - 132 characters: 7 x 15 matrix in a 10 x 16 cell or 7 x 12 matrix in a 10 x 13 cell Refresh rate: depending on character display: 78, 70 or 65 Hz Character sets: 96 ASCII characters, 7-bit ISO. In QVT119+ emulation: IBM codepage 437/850 Screen saver: yes, adjustable times Memory: depending on emulation: 4 or 7 screen pages Keyboard: New ASCII (N.A.), various languages, 20 + 1 programmable function keys Emulations: Qume QVT 101+/119+, Wyse WY30//50, TeleVideo TVI 910+/925/905, ADDS A2, ADM 5, ADD ENH, HZ 1500 Interfaces: 2 serial up to 38.4 kB / 1x host RS232, DB25 / 1x printer RS232, DB9 / data flow control: Xon/Xoff, DTR or none / Option: RS422 or current loop Data format: 7 or 8 bits / even, odd or no parity / parity check on or off / 1 or 2 stop bits Transmission mode: full or half duplex / block Printer interface: 1x serial, RS232 DB 9 Power supply: 95 - 264 VAC, 47 - 63 Hz Power consumption (max.): 24 W Gusdpfxeivd Eas Ag Teh Additional hardware: Bosch floppy disk reader FDS 514 Bosch PDV controller Bosch handheld HBG 2 including cart and various data cables Item condition: used Complete factory closure, large selection of storage platforms, pallet racks, shelving units, paternoster lifts. High-quality industrial machines, lathes, grinding machines, hand tools More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2017, machine/vehicle number: 75061713008, functionality: fully functional, operating hours: 11,255 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, stroke length: 210 mm, table width: 104 mm, table length: 3,050 mm, table height: 858 mm, throat depth: 250 mm, clearance between the columns: 2,550 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 1,400 mm, total height: 2,520 mm, overall weight: 8,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, Brand: Hesse by Durma Press force: 200 tons Year of manufacture: 2017 Bending length: 3050 mm Includes various tools Price: 35,000,- EUR (net) Gujdpfjzcxb Dex Ag Toh

Condition: used, mileage: 884,791 km, power: 228 kW (309.99 HP), first registration: 11/2012, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro5, color: red, brakes: retarder, Year of construction: 2012, Equipment: ABS, air conditioning, fog lights, power assisted steering, = Additional options and accessories = Godsy Ht Uuepfx Ag Touh - Adjusted for handicapped - Autoradio - Climate control - Double glazing - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Mp-3 - Parking sensor - Reverse camera - Sun visor = More information = Engine capacity: 8.849 cc Make of engine: Cummins Tyre tread remainder on axle 1: 40% Door count: 2/3

Condition: used, Year of construction: 2000, grinding diameter 300 mm grinding length 1200 mm workpiece turning speeds 6000 U/min max. workpiece weight 70 kg control FANUC peripheral speed 140 m/sec grinding wheel size CBN 400 x 5 mm Spindle power 24 kW weight of the machine ca. 11 t Quickpoint 5002/10 CNC external cylindrical grinding machine, built in 2000 - Regular maintenance carried out Godpfjy Dibxsx Ag Tjuh - Documentation available Special accessories: - Junker novotecnic cooling lubricant system - 2x LTA II R/H extraction systems - Hyfra recooler - 4 grinding wheel blanks - Oil pan with grating *Disclaimer: All information is non-binding and may be incomplete or inaccurate. Subject to change without notice. No liability is accepted for the accuracy or completeness of the information provided. The disclosure or transfer of the data provided by us is not permitted without our express written consent. Translated with (free version)

Condition: used, Year of construction: 2008, Hesse E 2040 - Hydraulic press brake - Cybelec DU 6000 CNC control system Gjdpfx Agszl Tkdo Teuh - 3 controlled axes (Y1, Y2, X) - manual Wila crowning table - 2 adjustable support arms - light barriers - incl. bending tools & operating manual - year of manufacture 2008 Technical data - Press capacity: 40 t - Bending length: 2050 mm - Distance between uprights: 1650 mm - Rapid traverse: 150 mm/s - Bending speed: 15 mm/s - Retraction speed: 100 mm/s - Stroke: 160 mm - Overhang: 350 mm - Motor power: 4 kW - Operating voltage: 3x 400 V - Oil tank capacity: 60 l - Machine dimensions WxHxD: 2800 x 2400 x 1600 mm - Weight: 4060 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 19,000 mm, total width: 19,000 mm, table width: 610 mm, overall weight: 8,500 kg, table length: 850 mm, power: 12 kW (16.32 HP), pressing force: 120 t, installation height: 300 mm, to visit under power Gjdpfx Aerwlxajg Tsuh

Condition: used, mileage: 931,635 km, power: 228 kW (309.99 HP), first registration: 12/2012, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Year of construction: 2012, Equipment: ABS, air conditioning, fog lights, power assisted steering, = Additional options and accessories = - Adjusted for handicapped - Autoradio Guedsy Hu R Depfx Ag Tsh - Climate control - Double glazing - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Mp-3 - Parking sensor - Reverse camera - Sun visor = More information = Engine capacity: 8.849 cc Make of engine: Cummins

Condition: good (used), Year of construction: 2002, functionality: fully functional, power: 12 kW (16.32 HP), pressing force: 120 t, table width: 610 mm, table length: 850 mm, total length: 19,000 mm, total width: 19,000 mm, overall weight: 8,500 kg, installation height: 300 mm, to visit under power Guoderwlxtepfx Ag Tsh

Condition: new, withquick stroke system, rotatable drill head,operating instructionsdrilling width 240 mmdrilling depth 180 mmdrilling stroke 140 mmmotor power 2.2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricmotor rotation angle 65° right/leftweight 268 kgarticle no.: 320010A 2500702-speed motor, 1400/2800 rpminstead of 2.2 kw, (LLB/BS/BSK)A 250055Eccentric presser with column and clamping crossfor LLB 200/300/320A 3504154-wheel chassis for LLB 300/320/400with 2 swivel castors and 2 brakes onown wheels 2 brakes onown frameA 25012890° plug-in stop for LLB 200A lling grid system SH LLB 300 D/320 Dwith 4 rows of holes 16, 20, 22, 25 mm,Bowden cable operation Gsdpfx Aovwfrzsg Teuh

Condition: used, functionality: fully functional, machine/vehicle number: 90501366, Year of construction: 2016, operating hours: 11,990 h, load capacity: 2,000 kg, lifting height: 1,750 mm, fuel type: electric, construction height: 1,310 mm, drive type: Elektro, Double-deck stacker Chassis number: 90501366 Gsdpfx Agoz D Nkue Tsuh Condition: Ready for use and fully functional Technical condition: good Description: Jungheinrich ERD 220 KP, No.: R0831, Year of manufacture: 2016, Operating hours: 11,990, Batteries tested and in good working order. The unit is in normal visual condition and good technical condition. Further identical units available: ERD 220 KP - SN: 90536092 // 15,433 hours // Year of manufacture 2017, ERD 220 KP - SN: 90536093 // 14,941 hours // Year of manufacture 2017, ERD 220 KP - SN: 90540708 // 11,836 hours // Year of manufacture 2017, ERD 220 - SN: 98240129 // 11,709 hours // Year of manufacture 2019. Fast and uncomplicated transport possible by arrangement! This advertisement serves only to identify the unit! A detailed description of the condition and possible equipment will be provided individually upon request! Errors and prior sale excepted, sale only to commercial customers. Every sale of used goods is subject to exclusion of warranty and/or guarantee. If you have not found your stacker, please contact us. We still have a large selection of other units in stock.

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester Gjdeyfmt Hjpfx Ag Teuh -Manufacturer: TGL, Manometer -1-0 bar, unused, original packaging -Type: 1/BM 20/2 160Ø -1-0 kp/cm² -Number: 2x pressure gauges available -Price: per piece -Cardboard dimensions: 200/180/H70 mm -Weight: 0.9 kg

Condition: good (used), Year of construction: 2017, operating hours: 3,584 h, mast type: telescopic, color: green, General information Mileage: 39.208 km Drivetrain Make of engine: Nissan Weights Empty weight: 3.375 kg Gsdpezh H Hqjfx Ag Tsuh Functional Working height: 2.500 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 65 Rear tyres remaining : 65 Delivery terms: CIP, EXW Max. horizontal reach: 1900 m Latest inspection: 2026-05-01 Production country: DE Additional information Please contact Michael Overmeer for more information Klaas Theo 25 aerial work platform mounted on a Nissan Cabstar construction year 2017 with 3.584 hours and only 39.208 mileage. Last inspection at Klaas 05-2026. Machine is equipped with automatic leveling of the support legs and has a unique sideways range of 19 meters and a height range of 25 meters. Changes and typographical errors reserved.

Year of construction: 2006, condition: good (used), For sale are 3 Siemens component placement machines, consisting of: 1 unit X 2 (year of manufacture 2006), model B 348 = €10,900 + VAT 1 unit X 2 (year of manufacture 2006), model B 251 = €10,900 + VAT Both machines have been inspected and tested for full functionality in our workshop. All machines have a valid maintenance report. An on-site inspection is possible and desired. Please refer to the photos for the technical data and configuration of the respective machines. We will also be happy to answer any questions you may have about the machines in person. Upon request, a reference run video is available for each machine. Godpfx Ajyrm E Aog Teuh We can also carry out modifications for your specific application for an additional charge. The machines are sold without component tables or MTC. Location of the machines: Zollner Elektronik AG / Warehouse Roding / Buchenstraße 18 - 20 / 93426 Roding

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 1 h, type of input current: three-phase, table width: 1,000 mm, table length: 2,600 mm, total length: 2,000 mm, total width: 3,090 mm, total height: 3,600 mm, overall weight: 3,800 kg, workpiece height (max.): 60 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Guodpfstx T Tysx Ag Tjh

Condition: used, mileage: 961,060 km, power: 228 kW (309.99 HP), first registration: 12/2012, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro5, color: blue, brakes: retarder, Year of construction: 2012, Equipment: ABS, air conditioning, fog lights, power assisted steering, = Additional options and accessories = - Adjusted for handicapped Gusdey Ht S Hopfx Ag Tjh - Autoradio - Climate control - Double glazing - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Mp-3 - Parking sensor - Reverse camera - Sunroof - Sun visor = More information = Engine capacity: 8.849 cc Make of engine: Cummins Tyre tread remainder on axle 1: 20% Number of microphones: 1 Door count: 2/3

Condition: used, Year of construction: 2022, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: GL61180KC, The 3E shredder is currently still in use. It will soon be replaced with a more powerful machine. Shaft length: 1800mm 2 x 90kW motors The sale of this machine includes 1 new gearbox and 2 used gearboxes. Also included are 1 new motor and 2 used motors. For more information, please visit the 3E Machinery website, where we purchased this machine. This shredder has always been used for shredding car tires. Godez Rmt Uspfx Ag Touh

Condition: excellent (used), Year of construction: 2000, HESS rack trolley, lifting and extending platform, year of manufacture 2000 Guodpfx Agjxmu Elj Tsh

Condition: new, Year of construction: 2019, Empty weight: 275 kg Attachment suited for: Lifting equipment Gjdpfsz Ryvvex Ag Tjuh