Used Gelec Groupe Electrogene for sale (1,063)

Condition: used, Year of construction: 1998, 13 spindles at 32mm centres Approx 70mm max boring depth Redpfxezd Uu Ie Altjw Spindle speed 2800mm 2.5hp motor Manual tilting of boring group from vertical to horizontal [can be locked at 45 degrees]

Condition: like new (used), Year of construction: 2023, 2023 Unused VLB Group EB-53RH Fully Electric CNC Tube Bender With VLB 3D Software Summary Maximum Capacity (45kg/mm²) Ø53 x 2mm. Controlled Axes 'X' Precision=±0.05mm, 'Y' Precision=± 0.05°, 'Z' Precision=± 0.05°. Maximum Bending Radius 275mm. Installed Power 35.5kW. Voltage 380-400V. S/No. V00656 (2023). NOTE: This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice. Redpfxozfqffj Altew With Support Blocks, Tooling & Foot Switches. Approx Foot Print 6,200 x 1,800mm. Weight 5,100kg. NOTE: This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice.

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: Rjdpfx Alsy R Tk Rjtow • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Year of construction: 2022, condition: good (used), Manufacturer: Clextral Model: Evolum EV032 M Year: 2022 Condition: Used Serial Number: B145 Stock Number: 3385 Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Compressed air: 6 Bar Steam injection: 2 - 6 Bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 working hours! Clextral water pump Redpfxezab Ste Altow Type: CLX DKM Flow: 6 - 42 l/h Pressure: max 10 Bar Reservoir: 7.5 litre Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Clextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max 10 Bar Reservoir: 10 litre Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam kit Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 Bar Maximum pressure:10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Compressed air: 6 - 10 Bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pc. Tooltemp thermoregulator Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group plowshear mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 litres Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip feeding screw Type: ELV 70/80-R Hopper: 150 litres Outfeed: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing unit Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling power: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Year of construction: 2019, condition: as good as new (ex-display), functionality: fully functional, KRÜSS Type: FP8400 Remarks: (Year of manufacture 2019) The device has never been put into operation, is in new condition, and is in its original packaging. Description: The flame photometers from A.KRÜSS are used to determine the concentration of alkali and alkaline earth elements in aqueous solutions. The devices are a simple and particularly cost-effective alternative to analytical techniques such as ICP or AAS. Flame photometers are particularly suitable for the quantitative determination of alkali metals such as sodium (Na), potassium (K) and lithium (Li) and alkaline earth metals such as calcium (Ca). The measurement is carried out simultaneously for these elements in a single step. Through consistent modernization of the flame photometers and a particular focus on safety concepts, completely new application areas are opening up for many cost-sensitive customer groups – from automated incoming goods inspection to the qualification of FFP masks according to DIN 149. Low operating costs are one of the main strengths of AES; in addition, the technology of the FP8000 series scores points with high determination accuracy. Measuring food samples Determining the quality of high-purity glasses and vials for pharmaceutical packaging Concrete classification, analysis of infusion solutions. Rjdpfeziap Isx Altsw Flame photometer, laboratory version with manual sample feed, 4 measuring channels, measuring methods freely configurable, additional channel for flame monitoring. Measuring ranges for undiluted samples: 0.01 mg/l to 4500 mg/l sodium 0.01 mg/l to 4500 mg/l potassium 0.01 mg/l to 4500 mg/l lithium 0.50 mg/l to 4500 mg/l calcium Resolution: 0.001 mg/l for all elements Accuracy: +/-1% with appropriate quality of standards Precision:

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,500 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC 025, laser power: 2,500 W, pipe diameter (max.): 140 mm, pipe length (max.): 8,500 mm, table length: 8,500 mm, working length: 8,500 mm, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, workpiece weight (max.): 4,000 kg, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 10,000 kg, total length: 17,536 mm, total width: 4,604 mm, total height: 2,237 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, 2006 BLM Adige LT712D Tube Laser Machine Manufacturer: BLM Adige Machine Model: LT712D Laser: Rofin Sinar series DC K 2.5kW Laser source. Year: 2006 Infeed: 8,500mm Outfeed: 6,500mm Condition: Very Good Hours: 22,500hrs Availablility: Immediately This 2006 BLM Adige LT712D is a high-performance CNC tube laser cutting system designed for precision processing of mild steel, stainless steel, and aluminium tube profiles. Known for its reliability and accuracy, the LT712D is one of the most capable mid-range tube laser platforms, delivering clean, repeatable cuts with full automation from loading to unloading. With only 22,500 operating hours, this machine is in very good condition and has been maintained to OEM standards. It offers exceptional value for fabrication companies, structural steel specialists, subcontractors and manufacturers looking for a high-precision tube laser with proven durability. Rsdpfjx Ddagex Altsw ⭐ Key Machine Specifications Working Capacity & Tube Dimensions Minimum tube length: 3,200 mm Maximum tube length: 8,500 mm Round tube diameter: Ø12 – Ø140 mm Square tube: 12 – 120 mm side dimension Rectangular / flat-oval: up to 170 mm circumscribed circle, min. side 10 mm, max. side 140–150 mm Max bar weight: Linear: 15 kg/m Total (L=8500 loader): 130 kg Machine Dimensions & Weight System footprint (L=8500 version): 17,536 × 4,604 × 2,237 mm (complete system) 13,595 × 4,604 × 2,237 mm (machine body) Machine weight: approx.10000 daN (= 10 tonnes) Laser, CNC & Automation CNC Control: Siemens Sinumerik 840D Laser Source: Rofin DC-K Series Cutting Head: Autofocus head with capacitance sensor + collision protection Working Axes: X travel: 8,500 mm Y travel: 400 mm Z travel: 95 mm A-axis: spindle rotation A1-axis: steady rest rotation V-axis: Bar support on the machining line (90mm) W-axis: Unload piece support (85mm) X1-axis: steady rest travel (610 mm) Loader & Unloader Automatic bundle loader with alignment, measuring & singularisation system Scimitar-style tube transfer system for smooth transition to machining line CNC-controlled tube support system with 5 active support groups Intelligent cut-piece unloader with conveyor belt for short parts up to 300 mm Extraction & Cooling Systems Fume extraction: 2,000 m³/hr with high-efficiency filtration system Cooling: MTA TAE 121 chiller, 260-litre cooling circuit reserve Hydraulics: 25-litre tank, 25 L/min pump, 70 bar system pressure 🟢 Condition & Availability Year: 2006 Hours: 22,500 (very low for a tube laser) Condition: Very Good – well maintained, clean, fully operational Availability: February–March 2026 Includes: Full machine, loader, unloader, chiller, documentation supplied. Why the LT712D Is a Top Choice The BLM Adige LT series is widely regarded as the benchmark for tube laser systems. This LT712D stands out thanks to: ✔ Exceptional tube cutting accuracy ✔ Reliable automatic loading & unloading ✔ High-quality Rofin laser source ✔ Full CNC control of every movement ✔ Capability to handle a wide range of profiles ✔ Heavy-duty industrial build quality (10 tonnes of rigidity) For fabricators looking to increase productivity, quality, and automation, the LT712D is an ideal investment. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 41,124 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC035, laser hours: 12,753 h, laser power: 3,500 W, pipe diameter (max.): 240 mm, pipe length (max.): 12,500 mm, workpiece weight (max.): 400 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, 🔷 2016 BLM Adige LT8.10 CNC Tube Laser – 3.5kW CO₂ | 3D Tilt Head | 12.5m Load | Siemens Control Used 2016 BLM LT8.10 CNC tube laser for sale. 3.5kW CO2, Siemens control, 3D cutting head, 12.5m loader. Fully equipped with chiller & extraction. 💡 High Performance 3D Tube Laser Cutting System – Fully Automated 2016 BLM Adige LT8.10 CNC Tube Laser, a premium 3D tube laser cutting machine designed for high precision, flexibility, and productivity across a wide range of tube and profile cutting applications. The LT8.10 is one of the most versatile machines in its class, capable of processing round, square, rectangular, and structural profiles (I-beams, channels, etc.) with high accuracy and repeatability. 🔧 Machine Details Manufacturer: BLM Group (Adige) Model: LT8.10 Year: 11/2016 Type: CNC Tube Laser Cutting Machine Laser Type: CO₂ Laser Source: Rofin DC035 (3.5 kW) Control: Siemens CNC ⚙️ Key Features 3D Laser Cutting Head with Tilt Capability (±45°) High precision angular / bevel cutting Fully automatic tube processing Designed for high productivity and flexibility Automatic parameter adjustments for optimal cutting performance Capable of cutting complex geometries and joints 📏 Tube & Profile Capacity Round Tube Diameter: Ø12 – 240 mm Square Tube: up to 200 x 200 mm Max Bar Length: 12,500 mm (12.5m infeed) Unloading Length: 8,500 mm Max Linear Weight: 40 kg/m Max Total Bar Weight: 400 kg Rjdpfx Aley Ir Eujtjw ✔ Processes: Round, square & rectangular tube Flat oval & special profiles Structural sections (I-beam, U-channel, angle, etc.) ⚡ Laser & Cutting Capabilities Laser Power: 3.5 kW CO₂ (Rofin DC035) 3D Bevel Cutting: Yes (tilting head) Automatic Focus & Adjustment Systems High quality edge finish Ideal for weld prep & complex fabrication work 🧠 CNC & Software Siemens CNC Control System User-friendly interface Full program control and automation High precision motion control for complex cutting operations 🔄 Loading & Handling System Automatic Tube Loading System Infeed Length: 12.5 metres Outfeed Length: 8.5 metres Automatic tube positioning & rotation Multi-position unloading capability ❄️ Supporting Equipment Included Chiller: Cosmotec WLAD842207ZAS0 Extraction Unit: Donaldson Torit DCE 2DFP4-SPRK Full integrated system ready for production 🧱 Machine Overview The LT8.10 is designed to deliver high precision without compromising productivity, making it ideal for both high-volume production and complex custom fabrication. Its rigid structure, automatic handling systems, and 3D cutting capability make it a top-tier solution for: Steel fabrication Structural engineering Tube processing companies Automotive & industrial manufacturing 💰 Why This Machine? Proven BLM Group reliability High-end 3D tube laser capability Handles large diameter tubes (up to 240 mm) Fully automated system → low labour cost Complete package with chiller & extraction Excellent value compared to new Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2009, Case packer from 1993 refurbished by the manufacturer in 2009. Automatic packing of boxes with cardboard group by rows and by stacking in a cardboard box with closure. Max. production: 20 to 30 cycles / minute Nordson Problue4 glue generator Label removal Delna DS 14 History, documentation and electrical diagrams available. Spare parts available. Product length 50 - 130 mm Product width 47 - 200 mm Product height 15 - 40 mm Rsdpfxozg I U Te Altjw Carton length 70-250 mm Carton width 70-250 mm Carton height 40-120 mm

Year of construction: 2019, condition: excellent (used), SEMA-Maschinenbau Type MT-40-C Technology Drilling Year of manufacture: 2019 Control Unit Technical Specifications Control System - CNC control: SIEMENS 840 D SL Dimensions & Weight - Space required (left/right): 13,480 mm - Space required (front/rear): 10,502 mm - Total height: 4,532 mm - Total weight: approx. 23,000 kg Electrical connection data - Power consumption (total): 210 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Basic machine with 11 stations 1. Station 1: Component loading with multi-axis handling. 2. Station 2: Crown turret *Sauter 112* (3 spindle units, HSK 40) with internal cooling (IKZ), max. speed 15,000 rpm. Rsdpfx Alewf R N Hstjw 3. Station 3: Crown turret *Sauter 112* (3 spindle units, HSK 40) with external cooling. - Additionally: 1 × 2-axis unit *SEMA AE2-35/50/NC*. 4. Station 4: 1 × SE-HSK 50C spindle unit with internal cooling, max. speed 15,000 rpm. 5. Station 5: 1 × Crown turret *Sauter 112* (3 spindle units, HSK 40) with internal cooling. 6. Station 6: 1 × Sauter 112 crown turret (3 spindle units, HSK 40) with internal coolant. - Additionally: 1 × SEMA AE1-35/50/NC 2-axis unit. 7. Station 7: Hydraulic docking unit including C-axis positioning unit. - Equipment: 7 × SEMA AE1-35/50/NC 2-axis units. 8. Station 8: Hydraulic docking unit including C-axis positioning. - Additionally: 1 × permanently integrated angle head. 9. Station 9: 1 × SEMA AE3-35/50/NC 2-axis unit. 10. Station 10: Permanently integrated angle head *Benz S-35/50/NC*. 11. Station 11: Cleaning unit for blowing off (inside/outside). --- Notes on structuring: - The information is grouped thematically (control, dimensions, electrical system, stations). - Technical details such as spindle types, cooling, and speeds have been listed precisely. - Models and manufacturers (Sauter, SEMA, Benz) are highlighted. - Stations 7 and 8 have been more clearly separated to avoid confusion. - Consistent formatting for better readability. Do you need further adjustments? 😊 Siemens Sinumerik NCU 730.3BPN 840DSI Electrical capacity 210 KW Availability date 05/2025 Weight 23 t

Condition: used, Year of construction: 2000, Overview These HERPASA self-emptying stainless steel tanks, designed as 30,000 liter autovaciante tanks, are suitable for wine production and similar beverage processing applications. The tanks are installed as a group of vertical stainless steel vessels and are equipped with bottom cone discharge systems for efficient product emptying and solids handling. The tanks are manufactured from AISI 304 / AISI 316 stainless steel and feature a 45° bottom cone, rectangular access doors, cooling jackets, temperature monitoring, product connections, and an internal mechanical extraction / rotating discharge system. The available drawings and photos show a robust industrial tank configuration with cooling surfaces, lower discharge equipment, and external piping for wine circulation or transfer. The tanks are particularly suitable for applications such as fermentation, storage, cooling, wine processing, and controlled product discharge, especially where self-emptying functionality is required. The visible installation includes at least four tanks of similar construction. Technical Data - Manufacturer: HERPASA - Year: 2000 - Tank Type: Self-emptying vertical tank / autovaciante tank - Application: Wine / beverage processing - Capacity: 30,000 liters - Material: Stainless steel AISI 304 / AISI 316 - Tank Diameter: approx. 2,800 mm - Total Height: approx. 7,050 mm - Bottom Cone Angle: 45° - Cooling System: Upper and lower cooling jackets - Upper Cooling Jacket Surface: approx. 8.35 m² - Lower Cooling Jacket Surface: approx. 4.4 m² - Cooling Jacket Connections: R 3/4" water inlet / outlet - Temperature Measurement: Thermometer, range 0 to +60°C - Probe Connection: R 1/2" sleeve - Discharge System: Bottom discharge with extraction system - Internal Equipment: Rotating wine diffuser / internal extraction or sweeping mechanism Rodpfx Aey Uc A Rjltew - Access Doors: Rectangular manways / inspection openings - Connections: NW50 and NW65 product connections - Safety Equipment: Safety valves 2 1/2" - Installation: Group of vertical stainless steel tanks with external pipework - Condition: Used, installed in industrial winery environment

Condition: used, Year of construction: 2001, Overview Rsdpfjyy Sqzjx Altew This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data - Capacity: approx. 40 trays/min - Formats: - 24 × 0.5 L cans - 15 × 0.33 L sleek cans - 4 × 6 × 0.33 L bottles - 6 × 4 × 0.33 L bottles - 8 × 3 × 0.33 L bottles - 3 × 6 × 0.5 L bottles - Application: Packaging of cans and bottles - Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery - Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) - Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink tunnel - Conveyor system | Gebo | Integrated product transport - Control panel | Siemens | SIMATIC OP17 | Operator interface

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes - Closures: - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine Rodpfxoyx I Awe Altow - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h

Condition: used, Year of construction: 2012, Overview  This pallet stretch wrapping machine with conveyors was manufactured in 2012 by Not provided Tosa Group Bande Releuse. Redpfx Aeypgi Njltjw The machine is designed to secure palletized loads with stretch film for transport and storage. The system applies controlled film tension to ensure load stability and protection during handling and logistics operations. The machine is currently stopped (idle for one year) and remains installed and operational. Technical data  - Capacity: 25 pallets/hour - Application: Pallet stretch wrapping - Configuration: Stretch wrapping machine with integrated conveyors

Condition: used, Year of construction: 2018, Overview  Rjdjykrdbepfx Altjw This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  - Capacity: 100 L/h evaporation capacity at +22/+24 °C - Application: Concentration of musts, juices, and liquid products - Operating modes: Recirculation mode or direct concentration mode - Max. concentration: 55–70 °Brix - Daily output: 2,400 L evaporated / 24,000 L enriched to 10% - Utilities: - Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE - Water: +12/+18 °C (low consumption) - Compressed air: 6–8 bar - Connections: DN40 DIN, 50 mm hoses - Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  - Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction - Evaporation chamber | Stainless steel, full inspection access - Heat exchanger | AISI 316L tubular exchanger - Vacuum pump | Liquid-ring system with cooling recirculation - Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors - Pumps | Stainless-steel centrifugal and mono volumetric discharge pump - Vapor condenser | Stainless-steel surface condenser - Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks

Condition: used, Year of construction: 2008, Overview  This stretch blow-moulding machine was manufactured in 2008 by Italian company KOSME (Krones Group). The machine is in good working condition and remains in production until end of November 2025. It will then be dismantled and craned out through the roof. Technical data  - Capacity: - 10,200 bph - Working hours: - ~50,000 h - Formats: - Neck finish: 29/21 (can be modified to 1881 or others) - Preforms used: R-PET by Plastipak & Resilux - Number of moulds: - 6 (moulds not included) - Equipment & Features: - Quick change for shell molds - Kosme linear oven - 8 heating modules - Kosme preform tipper with conveying system - Kosme preforms feeding rail - Kosme electrical cabinet - Kosme Danfoss VLT drive - Kosme touch screen control panel - Set of spare parts (list on request) - Service history: - Kosme FBA maintenance - Complete Kosme service in October 2024 - Ongoing service by in-house technicians Scope of Delivery  - Stretch blow-moulder KOSME KSB 6R - Preform tipper with conveying system - Preform feeding rail - Electrical cabinet - Drive and control panel - Spare parts list (on request) Redpfxoyb Tbio Altsw

Condition: used, Year of construction: 2006, Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  Rodpsw T Sthjfx Altsw - Capacity: 30,000 bottles/h (0.33 L, 6-packs) - Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm - Formation of packs: 2×3 (six-pack wraparound) - Operating hours: 1,677 - Construction: Full stainless steel - Glue type: Hotmelt Scope of Delivery  - Wraparound packer | Krones | Solidpac | 2006 - Infeed conveyors for bottle supply and dividing system  

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 Rjdpewh U Avefx Altew - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel

Condition: used, Year of construction: 2019, High-performance automatic transfer switch (ATS) from the ASCO 7000 Series, designed for critical power infrastructure in data centers, hospitals, industrial facilities, and backup power systems. This is a G-design unit with a solid neutral, rated up to 1200 amps, 3-phase, with Group 5 Controller and Type 1 enclosure. Technical Specifications: Series: ASCO 7000 Series ATS Design: G-design Current Rating: Up to 1200A (model shown) Voltage: 480V Poles: 3 (Three-phase) Neutral: Solid (A) Control Module: Group 5 Controller Enclosure Type: Type 1 Frequency: 50/60 Hz Transfer Type: Automatic (Open Transition standard) Certifications: UL 1008, CE, ISO 9001 Features: Field connections via terminal block (TB) Transfer Control & Indicators on door panel Engine Start contacts, Auxiliary Circuits Alarm relays, test functions, diagnostics Fault withstand and closing ratings suitable for generator/utility configurations Redow Enquopfx Altow Compatible with bypass/isolation options (in extended models) Application Areas: Data Centers & Critical IT Healthcare & Life Safety Systems Industrial Facilities Government and Military Infrastructure Commercial Buildings with Backup Generators Condition: Used – Excellent condition, from professional environment. Units available: 8 units in stock

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm Rodpezhnafjfx Altow - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: used, mileage: 239,000 km, power: 110 kW (149.56 HP), first registration: 02/2010, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: automatic, emission class: euro5, number of seats: 6, total length: 7,000 mm, Equipment: ABS, central locking, parking heater, soot filter, Chat now via WhatsApp: Contact our sales consultant quickly and easily. Attention!!! Sales are preferably made to commercial businesses. Internal ID number: [3418] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery * Financing available even without a down payment * Spring offer: Upon request and for a surcharge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * German vehicle * Regularly serviced * Immediately ready for use * Maxi version, high and long * Auxiliary heater * Automatic transmission * Mixto with 6 seats * Camper conversion with bed/table/kitchenette/shelves/awning etc. Rjdpfxszhhx Io Altow Special equipment: 13-pin trailer socket, ashtray in the passenger compartment, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, front side turn signals, digital tachograph, floor mats, passenger compartment, heated rear window, rear door (opening angle 270 degrees), metallic paint, crossmember with integrated step, spare wheel in driving condition, spare wheel holder under the end of the frame including jack, interior rearview mirror, seat equipment: comfort headrest, passenger seat, seat equipment: comfort headrest, driver's seat, seats in the driver's cab: passenger double seat, seats in the driver's cab: driver's seat comfort, seats in the cargo/passenger compartment: 1st row, 3-seater bench, narrow, seats in the cargo/passenger compartment: 2nd row, 3-seater bench, reinforced rear stabilizer, reinforced front stabilizer, reinforced shock absorbers, fuel level gauge for auxiliary heater, luxurious interior trim in the cargo/passenger compartment, reinforced front axle, auxiliary heater (hot water), two-way speakers front and rear Additional equipment: 3rd brake light, storage net on the front seat backrest left, storage net on the front seat backrest right, adaptive brake light, airbag passenger side, airbag driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, floor panel in combination design, brake assistant, headlining, headlining in the driver's cab, window for rear doors, window for rear doors/tailgate with wiper/washer system, window in the cargo/passenger compartment: - fixed, rear left, window in the cargo/passenger compartment: - fixed, rear right, window in the cargo/passenger compartment: - fixed, center left, window in the cargo/passenger compartment: - fixed, center right, window in the cargo/passenger compartment: - fixed, front left, window in the cargo/passenger compartment: - fixed, front right, glove compartment lockable, wooden floor in the cargo area, body/structure: combination high-roof standard, child safety lock, fuel tank: main tank 75 liters, headlight range adjustment, engine 2.1 liters - 110 kW CDI CAT, passenger car registration, wheelbase 4325 mm, smoker's package, low emissions according to Euro 4 emission standard Group III, sliding door cargo/passenger compartment right, seat cover/upholstery: fabric Lima, seats in the driver's cab: passenger seat adjustable, all-round glazing, maintenance interval display Assyst, heat-protection glazing (windshield with band filter at the top), permissible total weight 3.50 t, auxiliary heater (air) electric.----Do you want to lease or finance? We offer attractive offers

Year of construction: 2017, condition: used, Cooling group / cooling unit Frigoblock Year of construction 2017 Rjdjzic Hijpfx Altew Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: new, - Large jointer tables made of cast iron - The jointer table adjustment is controlled via a precise parallelogram system, ensuring that the distance from the table tips to the cutterhead remains constant in every position Rodpfsu T Hrcex Altsw - The large, stable fence made of anodized aluminum is easily movable and tiltable from 0° to 45° - The fence angle is readable from the working position - Supplied as standard with auxiliary fence - Large, four-knife cutterhead with precision bearings - Smooth operation thanks to precision engineering and heavy cast construction - Powerful industrial motor - Maximum user safety combined with the simplest operation - Chip removal display via scale - Manual table adjustment - Motor protection switch Equipment Details -Includes foldable auxiliary fence for narrow workpieces -Manual quick adjustment for chip removal with scale and rotating knob Safety Guard -The safety guard is foldable and designed to provide operator protection without hindering work TERSA Models with Tersa Cutterhead System -No setting or screwing required -Cutter knives can be changed in seconds -Self-locking -Especially quiet operation -Perfect planing results This product comes with the 3-year Stürmer warranty upon online registration. Warranty only applicable to end customers in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3 - PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weight: - Product length approx.: 2750 mm - Product width/depth approx.: 1500 mm - Net weight approx.: 680 kg Jointer: - Total table length: 2720 mm - Infeed table length: 1498 mm - Max. depth of cut on jointer: 8 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90 – 45° Connection for extraction: - Extraction port diameter: 120 mm Setup Information: - Footprint length: 2750 mm - Footprint width/depth: 1604 mm - Footprint explanation: Dimensions reflect maximum travel or usable lengths. Electrical Data: - Main motor power: 7 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Cutterhead: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm

Condition: new, - Sturdy steel and grey cast iron construction - Large, ribbed planing tables made of cast iron - Smooth operation due to high own weight - Four feed speeds - Motorized thicknessing table adjustment with two speeds and digital readout - Segment pressure bar at the infeed - Precision-mounted four-knife cutterblock - Helical gear steel infeed roller for particularly consistent and gentle timber feed - Outfeed roller with rubber coating - Large alloyed fence, tiltable from 90° to +45° - Auxiliary fence included as standard - Powerful industrial motor - Pneumatic quick-change system with pneumatic lifting and lowering of the jointer table - The extraction port position remains the same for both planing and thicknessing; no need for additional extraction hoses or awkward repositioning around the machine This item is covered by the 3-year Stürmer warranty with online registration. Warranty is valid for retail customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3 – PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product): approx. 2300 mm - Width/depth (product): approx. 1100 mm - Net weight: approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Jointer table width: 520 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90° – 45° Dust extraction connection: - Extraction port diameter, thicknessing: 120 mm Installation information: - Required length: 2300 mm - Required width/depth: 1610 mm - Explanation: Dimensions account for maximum travel and usable length - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Note: Please add the specified working area dimensions to the required machine footprint to determine the recommended free installation space Thicknesser: - Thicknessing table width: 520 mm - Min. working height: 3.5 mm Rsdpfx Aou T Hq Soltsw - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical data: - Main drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer cutterblock: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, - Motorised thickness table adjustment with two speeds - Digital display for working height - Thickness table made of grey cast iron - Thickness table mounted on four large trapezoidal-thread spindles for maximum stability and precision - Four feed speeds - Optional with two rollers in the thickness table - Standard with noise protection and chip guard curtain at infeed and outfeed - Adjustable roller pressure - Front feed roller with helical toothing - Outfeed roller with rubber coating - Powerful industrial motor This item comes with a 3-year Stürmer warranty upon online registration. Warranty only applicable for end customers in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 1305 mm - Width/depth (product) approx.: 1080 mm - Weight (net) approx.: 750 kg Extraction connection: - Extraction nozzle diameter (thickness): 150 mm Installation information: - Required space length: 1305 mm - Required space width/depth: 1080 mm - Required space height: 1197 mm - Note on required space: The dimensions take into account maximum travel distances or usable lengths. - Machine body length: 1305 mm - Machine body width/depth: 725 mm - Working area length: 1000 mm - Working area width/depth: 2000 mm - Note on working area: Please add the given dimensions to the required space to determine the recommended free installation area for the machine. Rsdpfxou T Hq Ee Altsw Thickness: - Thickness table length: 630 mm - Thickness table width: 1000 mm - Working height thickness min.: 3.5 mm - Working height thickness max.: 300 mm - Working length thickness min.: 210 mm - Max. stock removal thickness: 8 mm Electrical data: - Main motor power: 9 kW - Supply voltage: 400 V - Network frequency: 50 Hz Planer cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 pcs - Cutterblock speed: 4500 rpm - Planing width max.: 630 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm Rsdpfou T Hhkjx Altow - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm