Used Gannomat Slot Mortising Machine, Special For Stair Construction for sale (81,934)

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Chodpoxliguofx Agksa Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. Chjdpfxsq N Ud Is Agkea 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Complete factory equipment for sale: weaving, embroidery, dyeing, finishing, and processing. Many more machines are available. Textile Department * Jacquard Weaving: 11 × Picanol looms, Model 2004, XC 870 (Belgian) * Air-Jet Jacquard Weaving: 8 × Picanol looms, Model 2004 XL * Air-Jet Jacquard Weaving: 6 × Picanol looms, Model 2004, 5400 Jacquard Bonas, Jumbo * Complete set of air compressors, dryers, and air tanks required for operating the weaving machines. * Dobby Weaving: 4 × Picanol Omni looms, Model 1999 * Air-Jet Dobby Weaving: 8 × 2004 looms, 2.5 m working width, suitable for producing linen, gabardine, and dress fabrics (Picanol Omni Plus) * Rapier Weaving Machines (Chinese): Model 2014 – 4 units * Modern Warping Machine: 720 / 11 cones – 1 unit * Karl Mayer Weaving Machines: Model 2021 – 4 units * Karl Mayer Weaving Machines: Model 2017 – 2 units * Sizing Machine: 3 units ⸻ Embroidery Department * Saurer Epoca Embroidery Machines: 4 machines, equipped with 5 special attachments * Spooling/Winding Machines: Belinda – 9 units Cedoziz Dyopfx Agkeha * Spooling/Winding Machines: Barmag – 1 unit, Kaltema – 2 units * Complete set of air compressors, dryers, and air tanks required for operation. * Mouline Thread Production Line with all accessories (embroidery threads). ⸻ Finishing Department * Rams: 1 × Brückner, 6-chamber, with Mahlo, Model 2002 * Stenters: 3 Turkish Damson machines * Fabric Inspection Machine: 1 unit * Sewing Machines: 30 units * Fabric Pressing and Packaging Machine ⸻ General Factory Utilities * Industrial Chillers: 2 units * Steam Boiler: 6 tons, Riello burner, 2018 * Steam Boiler: 0.5 ton * Fabric Dyeing Jet Machine: 50 kg * Yarn Dyeing Machine (Hank): 600 kg * Yarn Dyeing Machine: 2 × 300 kg, complete with winding and unwinding system * Hydro Extractor: 1 for yarn + 1 for fabrics + 1 for hanks

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. Cjdpfx Agsq Nd U Hjksha 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Condition: new, Centauro ALFA NC Machining Centre For Joinery Components & Doors A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine can be equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Optional additional machining operations include producing a square corner hinge plate recess or lock face recess by means of the additional milling unit. The operator simply selects in the program if they want a radius or square corner and the machine does the rest. In addition the same milling head can be used to make the small pilot hole for hinge screws etc. There is also the possibility to produce a square end tenon, round end tenon or dovetail / dovetail slot when the special front table is fitted. Lastly on request the machine can be configured to import ISO files from external design software (e.g ARTCAM Express) to enable detailed engraving of items such as name plates etc. Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm Cjdpfsb Tmngjx Agkoha X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain.

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 2016, operating hours: 9 h, Hybrid LED light tower Smart solar battery and diesel power system Brand: Verdegro Type: LLTT-H Year: 2016 Chedjwhmqrjpfx Agkea Solar power system (350 W) High efficiency LED flood lights. Photocell daylight sensor (automatic/on/off) Spring-driven cable drum Optional: Geo fencing by DSE web interface 7 section vertical tower (steel galvanized) Forklift sprockets on top + below chassis Information LED backlight controller screen Hybrid diesel generator Fuel tank capacity 140 L Drip tray / spill container Four telescoping outriggers and leveling jacks Torsion rubber suspension axle

Condition: used, machine/vehicle number: 22011 SLS, Year of construction: 2023, Laser Data Marking Laser Manufacturer: Keyence Model: MD-X2520A Laser type: YVO₄ laser Laser class: 4 Wavelength: 1063 nm Output power: 25 W Laser Position Detection Laser type: Semiconductor laser Laser class: 3R Wavelength: 683 nm Output power: 5.0 mW Guide Laser / Distance Indicator Laser type: Semiconductor laser Laser class: 2 Wavelength: 655 nm Cedpfxezilv Ho Agkjha Output power: 1.0 mW Electrical Data Nominal voltage: 400 VAC Frequency: 50 Hz Control voltage: 24 VDC Nominal current: 23 A Power: 15 kW Back-up fuse: 50 A Diversity factor: 0.9 Power supply: 3 × 400 V + PE

Condition: excellent (used), Gannomat slot mortising machine / dowel drilling machine with Leroy-Somer motor - Motor type: LS80L2 - Power: 1.1 kW - Speed: 2810 rpm - Voltage: 220/380 V - Frequency: 50 Hz - Protection class: IP54 3-phase drive - Stable work table - Precision guide rails - Adjustable stops - Robust metal construction Chjdoy Saw Hepfx Agkja - Ideal for series production and precise wood joints – with drill and cup cutter - Air pressure must be shut off manually

Condition: used, Year of construction: 1973, Storage location: Nattheim Chjdpfxevvkt Uj Agkoa

Condition: used, total length: 4,300 mm, total width: 600 mm, total height: 1,100 mm, Colour: Green Empty weight: 600 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Model: Horizontal - Number of axes [pcs]: 1 - X-axis travel [mm]: 1500 - Transport dimensions: 4300mm x 600mm x 1100mm (l x w x h) - Transport weight [kg]: 600kg - Transport packages [pcs.]: 1 Financial information Csdpfx Aozkkukegksha VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) Chedjthuzpepfx Agkea - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Chodpfx Agsznn Hrjkoa Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: used, Second-hand machine In all operating modes, the materials are fed from the front through the roller gap and joined together by pressure Standard number of axes: Material unwinding 2 Silicone paper unwinding 1 Roller gap adjustment 0–52 mm Pressure 0.3–0.8 N/mm Processing speed maximum 5 m/min Slow operation 0.6 m/min Reverse operation 0.6 m/min Noise level > 70 dB(A) Material data: Max. width 1400 mm Max. material diameter: Unwinding diameter 200 mm Silicone paper take-up diameter 150 mm Max. panel thickness 50 mm Inner diameter of roll core: 76.2 mm Power supply 230 V Chedpfoznk A Nox Agkea Availability: short notice Storage location: Röllbach

Condition: excellent (used), combined circular saw / milling machine / slot mortising machine - 30mm spindle Chedpowzyx Ajfx Agksa

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine Chjdpfoyuty Sex Agksa used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: good (used), Year of construction: 1994, Manufacturer FRAMAR – Italy Vertical machining: 0 - 180 mm Cross travel: 0 - 150 mm Longitudinal stroke: 0 - 270 mm Table size: 540 / 110 mm Vertical table travel: 0 - 90 mm Work table tilt: 0 – 45 degrees Csdpfxsyxx A Io Agkeha Milling unit angle adjustment: 0 – 45 degrees Maximum door width: 950 mm Motor power: 1.5 kW Operating speed: 2800 rpm Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Chodpfxor Eli Te Agkea Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Hoku Houfek long hole drilling machine LLB VD 20 R Top condition - Top machine - Motor 1,5/1,9 kW, Transverse displacement in Y-axis 250 mm, Longitudinal displacement X 340 mm, Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, Chsdpfx Agsu Agzxekoa table rotatable +/- 45°, weight approx. 345 kg immediately ex stock 54634 Bitburg Subject to prior sale,

Condition: excellent (used), Year of construction: 1982, Panhans Mortising Machine Type: 116 – School Model – Two-hand operation Dowel hole drilling unit: spacing 16, 22, 25, 32 mm Drilling depth: 145 mm Mortise length: 240 mm Height adjustment stroke: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down: manual Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg Chsdpfxjx Nrhre Agkea Location: from stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2001, Felder slot mortising machine FD-250 Chedpfx Ageyvv Ngekja Motor power: 2.2 kW Year of manufacture: 2001 Height adjustment via handwheel Lever operation 2 manual clamps Includes several slot mortising cutters Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1995, used, in good condition, low hours, top equipment Manufacturer: Panhans Model: 116H Year of manufacture: 1995 Machine No.: 640 GS wood dust tested 2-lever operation Drill chuck 20 mm Dowel boring device with 4 stops 45° continuously adjustable mitre fence Mobile 2 pneumatic workpiece clamps Pneumatic height adjustment with foot pedal Extraction connection D 100 mm Csdpoxgu Uaofx Agksha Required space approx. 950 mm x 1000 mm x 1300 mm Weight approx. 200 kg Storage location: 54634 Bitburg, free loaded, unpacked Handover in current condition as inspected without guarantee or warranty

Condition: good (used), Code: 0476 Brand: MASTERWOOD Model: B 1/V - CE Standard Vertical chisel mortising machine for cutting recesses and grooves in wooden joinery, doors, beams and other items – CE Standard Technical data: Chodpszqzhbefx Agkja Vertical stroke 150 mm Longitudinal stroke 260 mm Transverse stroke 70 mm Motor power 3 Hp Max workable height of solid wood component 170 mm Min/max workable height of assembled window or door frame 740/1030 mm Work surface 140 x 470 mm Tilt +/- 45° Pneumatic workpiece clamping Suction inlet diameter 60 mm Compressed air 6 bar Overall dimensions mm 1000 x 850 x 1750 h Weight kg 440

Condition: used, Year of construction: 2016, operating hours: 6,494 h, Atlas Copco Hilight B5+ Baujahr : 2016 Cedpfx Agey R Atzjksha Betriebsstunden: 6.494 Std. LED-Beleuchtung: 4 × 350 W Lichtabdeckung: bis zu 5.000 m² Gewicht: 981 kg

Condition: excellent (used), Demolition sorting grapple, plug-in type, G21 / OQ80. Chodpfx Agoy S Rxuoksa

Condition: ready for operation (used), Custom-built triggering table for heads, shoulders, etc. 200 cm length Worktop 115x60 cm, triggering area Codpfx Agoykmrmjkeha No PVC panel included Stainless steel table offered without PVC worktop Approx. 20 tables in stock On many tables, the height and incline of the worktop can be mechanically adjusted