Used Fliegl Vts 400 for sale (18,301)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5*, color: red, Year of construction: 2022, The images are archive images; the vehicle may still be in use. Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin, container locks: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, with the longer version of the pivot pins for the container locking mechanism. 24 tons. Two-stage support jacks, single-person operation, with straight lower part, without lateral thrust compensation. Outrigger plates with holder, side impact protection, underrun protection (aluminum). Lsdpfx Ansy Tvpho Ueab With anti-splash flaps according to EC, stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam. Hose racks approx. 4500 mm long (including hose box) for hose pipes 2 x DN 200 on the outside + 2 x DN 160 in the center, hose box (stainless steel) at the rear, 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes, stainless steel grounding plate at the rear on the right-hand side of the frame, with international grounding sticker on the frame, steps at the rear right on the underrun protection, at the rear on the right-hand side on the main beam, tread plate approx. 260 mm long and 300 mm wide. Axles + Suspension SAF disc brake axles, "axle / chassis laser-measured" reduces tire wear and fuel consumption, axle spacing offset 1410/1310 mm (combined transport), up to 44 tons total weight. Air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, activation "3x brake" (starting aid is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h). Braking system 2-line compressed air braking system, color-coded line routing for easy servicing. Spring brake parking brake. 2 non-interchangeable coupling heads at the front, without connection line, EBS, electronic braking system with EBS socket at the front, without connection cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve, vehicle - driving stability system. Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no truck installed. Wheels and tires 385/65 R22.5", manufacturer's choice, steel rims, factory silver. Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pole socket at the front, without connection cable. Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached while complying with the permissible axle / support and saddle loads. (Poor driving and handling behavior due to incorrect load distribution is possible). This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas" ("end-cross-member-load-transfer areas"). Country of registration / Signage Warning sign according to ECE - 70, approval according to ADR according to 9.1.1.2 of the ADR, EX/II, EX/III, / registration certificate for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for sub

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902030382, empty load weight: 5,960 kg, maximum load weight: 29,040 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 03/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2022, The images are archive images; the vehicle may still be in use. Lodpfoy Tt Syex An Uoab Fine-grain steel welded construction, kingpin plate with interchangeable 2" kingpin, outer frame slightly angled with "Load-Lock profile" for securing tie-down straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened! 24 tons. 2-speed landing gear, single-side operation, with straight lower part, without side-to-side load compensation, without supports, extension ladder at the rear, chocks with holder, pallet box for 32 Euro pallets. Loading height is reduced by approximately 15-20 mm. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, air suspension, without lift axle. Braking System 2-line pneumatic braking system, color-coded lines for easy servicing. Spring brake parking brake. 2 fail-safe coupling heads at the front, without connecting line, EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable. Caution: the trailer may only be pulled by tractors that guarantee the effectiveness of the ABS! with raise and lower valve. Vehicle - driving stability system, brake pad wear indicator via EBS-CAN bus signal, for display on the display in the cab. The truck must be appropriately prepared for this. Axle load recognition via EBS-CAN bus signal, for display on the display in the cab. The truck must be appropriately prepared for this. No truck installation (no calibrated scale). Tire pressure monitoring system TPMS Haldex, via EBS, without truck installation (this must be available in the truck). Electrical System 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the sides, license plate lighting in LED (Note: in certain tractors, false diagnoses may occur, although the function is given). 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, additional LED work lights at the rear, switched via reversing light. Floor Sieve-printed panels approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg. Front Wall / Corner Posts at the Front 2,580 mm high, corner posts made of steel in full-volume design, release device for side tarpaulin on the front wall, "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection. Intermediate Supports: 2 pairs of sliding supports, movable along the entire length, with 4-fold insertion pockets and a long pocket at the bottom. Number of support positions. Insertion Bars: 5 rows of aluminum V-insertion bars. Rear Wall / Corner Posts at the Rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet. Rear portal doors, 2-leaf with 2 internal rotary latch locks each. Tarpaulin: Tarpaulin, with welded horizontal and vertical straps, tensioning fasteners made of stainless steel, single-colored tarpaulin according to desired color. Roof: Sliding tarpaulin, rear end lift foldable upwards, with tarpaulin that can be slid from back to front, L-roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, roof non-elastic, hardly any deflection of the roof beam during loading and unloading, anti-ice system, with 1 hose in the middle, with au

Condition: new, Catalog number: H0561 – new machine, in stock – CE certificate – Austrian production – professional – trolley on steel bars TECHNICAL DATA engine power S1 5500W (/750) voltage 400V / 50Hz table height 890mm extraction connector 100mm sliding table 3200x435mm extension table 1200x550mm max. cutting width with gauge 1300mm disc diameter 250-400mm (30) scoring blade diameter 120 x 20 x 3.2-4.2/2.2 mm rotational speed I: 3000; II: 4000; III: 5000 rpm Rotation speed of the scoring saw 8000 rpm Motor power of the scoring saw 750 W Blade tilt 0-45 ° Acoustic power level 90 dB (A) Acoustic pressure level 88.2 dB (A) Overall dimensions of the machine when unfolded L / W / H 3350 x 3600 x 900 mm Shipping dimensions 1350 x 2200 x 1170 mm Net/gross weight 930 / 1110 kg Features: Ljdpfxey Titge An Ujab - solid construction - with a large aluminum sliding table and boom, ideal for machining large elements and cutting large, heavy boards to size - cast iron work table (1100 x 700 mm) with table extension (900 x 830 mm) and table extension (610 x 600 mm) with solid steel construction – extension table (1200 x 550 mm) + cutting fence (1950 – 3300 mm) – scoring saw with separate motor – manually adjustable main saw blade angle 0°-45° (using angle indicator) – electric height adjustment of main saw blade and scoring saw Scope of delivery: LEUCO TCT main blade (Ø300 x 30 x 3.2 mm T72) LEUCO scoring saw blade (Ø120 x 20 x 3-3.8 T=2*12ES) Pressure beam – option Net price: PLN 24,300 Net price: EUR 5,750 depending on price EUR 4.20 (Prices may vary with higher fluctuations)

Condition: used, maximum load weight: 26,300 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 08/2017, next inspection (TÜV): 07/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,800 mm, loading space volume: 94 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, 2-axle Fliegl SZS 320 VIN: 2021899 Chassis / Attachments: * Air suspension // Raise and lower * Jost landing gear * 2 x BPW Eco Plus axles with disc brakes * Tyres: 385/65 R22.5 * Remaining tread: Front ~70%, Rear ~70% Body: * Standard tautliner * Pallet stops on both sides * Edscha sliding roof * Side curtains * Multilock side rail system Weights: * Gross weight: 31,000 kg * Unladen weight: 4,700 kg * Payload: 26,300 kg Miscellaneous: * German vehicle * MOT / Safety inspection valid until 01/2027 ---- New main inspections / safety checks or weight downgrades/upgrades are possible upon request. We are happy to assist you in obtaining export/transfer licence plates, and we can also arrange delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to changes, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s particular strength lies in the sale of new and used commercial vehicles. On our 11,000 m² premises, you will find a wide variety of vehicles. Our company philosophy is characterized by fairness and reliability. Customer satisfaction is our highest priority, so we offer our clients an excellent all-round service package and provide a competent contact person to accompany them throughout the purchase or sale of their vehicles. See for yourself! Laodpsy Rv Irofx An Usb Our services for you: Loading vehicles We are happy to assist you with loading your purchased vehicles. Arranging special transports We will happily help organize special transports. Temporary/export licence plates We will gladly assist you in obtaining export or short-term licence plates.

Condition: used, maximum load weight: 6,100 kg, overall weight: 8,900 kg, axle configuration: 2 axles, first registration: 10/1998, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 42 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 1998, 2-Axle Fliegl TPS 89 Pr.+Pl. Trailer with Drop Sides VIN: W1F20917 Chassis / Attachments: * Air suspension with lift/lower function * Tyres: 215/75 R17.5 * Tread depth remaining: front approx. 30/60%, rear approx. 70/40% * Spare wheel holder * 1x Haacon landing leg * 2x rear support legs Body: Lsdjy Rgyrepfx An Ujab * Fliegl Pr.+Pl. with drop sides * 60 cm side walls * 4x lashing eyes per side * Dimensions: 6,200 mm x 2,480 mm x 3,020 mm * Approx. 68 m³, 22 pallets Weights: * Gross weight: max 8,900 kg – reduced to 4,500 kg * Unladen weight: 2,800 kg * Payload: 6,100 kg Other: * German vehicle New main inspections/safety tests or changes to weight ratings (up- or downrating) available on request. We are happy to assist with export/transfer number plates, as well as organising the transfer of your purchased vehicles within Germany. Contact us! — We speak the following languages: German, English, and Russian! — No liability for printing or typing errors. Subject to change, prior sale or errors! — Who are we? Leible Nutzfahrzeuge is a family business located in Kehl am Rhein. With our many years of experience in preparing and marketing commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge is particularly strong in the sale of new and used commercial vehicles. Our 11,000 m² premises host a wide range of vehicles. Our business philosophy is based on fairness and integrity. As customer satisfaction is very important to us, we offer an excellent all-round service package and provide you with a competent contact partner who will assist you with the purchase or sale of vehicles. See for yourself! Our service for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organising special transports We are happy to help you organise special transports. Short-term/export number plates We are happy to assist in obtaining export/temporary plates. Customs formalities We are happy to assist you with customs procedures.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000211, empty load weight: 7,707 kg, maximum load weight: 27,293 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 15,030 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 101 m³, total length: 15,350 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", Year of construction: 2023, The images are archive photos; the vehicle may still be in use! Vehicle consists of: Chassis: Semi-trailer for freight forwarding Fine-grained steel welded construction in lightweight design up to the support legs, fifth wheel plate with replaceable 2" king pin 24 t, 2-speed landing gear, single-sided operation, with a straight bottom section Rear extension ladder Side door holders 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mudflaps Foldable mudguard for the lighting assembly Quarter mudguards Rear impact protection Curtain pole with holder 1 plastic toolbox Axles & Suspension 3 BPW disc brake axles "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air brake system Color-coded line layout for easy service Spring-loaded parking brake Duomatic coupling EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability system AAC Basic, automatic lift axle acting on the rear axle as maneuvering aid, up to 20 km/h, manually switchable Axle load detection via EBS-CAN bus signal Wheels and tires 385/55 R22.5, make at manufacturer’s discretion Electrics 24 volts, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to the indicator, 'flashing side marker lights' 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding mechanism built into the floor. 2-circuit hydraulic system. Forward/reverse switching is electric via wired remote control. Hydraulic operation via truck PTO Hydraulic connection with hose at the front wall and HDK screw connection Lasdpfxsy Snmpe An Ujb Recommended pump performance: Displacement: 110 l/min Pressure: 250 bar Minimum oil tank volume: 100 l Floor boards made of aluminum, 8 mm ribbed profile Aluminum box body from high-quality, wear-resistant material. Front and side walls made of aluminum hollow profiles, top all round welded with a wide special reinforcement profile from aluminum Sliding wall for improved unloading of cargo, with reinforced curtain flaps at the bottom. Rear wall made of aluminum hollow profiles, as two-leaf door, split 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 external locking bars, locked at the top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left in the direction of travel. With swingable cross beam at the top. Standing platform with ladders on both sides 3 removable, swingable cross beams for tarpaulin support Roll tarp, can be stowed on one side, with 2 longitudinal tension straps, 3 side tensioning straps with ratchet Operating notices: Special permit required if overall train length exceeds 16,500 mm Country of registration / license plates: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) Warning panel 'Long truck' Long truck overall assessment Driver instruction at the Triptis plant for up to 4 persons per truck combination Paintwork: Frame: DB 7350 Nova Grey Body: Natural aluminum Roll tarp: RAL 7035 light grey

Condition: used, functionality: limited functionality, machine/vehicle number: WFDFLT33901007921, empty load weight: 9,000 kg, maximum load weight: 26,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 02/2027, loading space length: 15,150 mm, loading space width: 2,480 mm, total length: 15,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: black, Year of construction: 2018, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 26,000 / 30,000 kg Permissible/technical axle load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight approx.: 9,000 kg +/- build tolerance Overall length approx.: 13,850 + 1,500 mm Maximum overall width: 2,550 mm Overall height approx.: 3,200 mm Internal length approx.: 13,650 + 1,500 mm Neck length approx.: 4,050 mm Lower deck length approx.: 9,600 + 1,500 mm Internal width approx.: 2,480 mm Loading height, lower deck approx.: 900 mm Coupling height approx.: 1,150 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis, semitrailer for forwarding operations Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Lashing rings recessed in outer frame, rated at 2.5 t each 24 t two-speed landing gear, single-sided operation, with straight base, without compensator Chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter-shell mudguards in front of first axle and behind each axle With anti-spray mud flaps behind each axle Rear impact guard Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm Document box at the front bulkhead Telescoping Central beam frame with neatly welded, interlocking telescopic frame components. Extensible by max. 1,500 mm and can be secured after approx. 1,500 mm; outer frame add-on sections approx. 1,500 mm long, for hooking into outer frame in telescoped state. Locking via mechanical pin system. Axles and Suspension SAF drum-braked axles Air suspension Braking System Dual-line compressed air brake system Spring-loaded parking brake Two fail-safe coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at front, without connecting cable Note: This trailer may only be towed by vehicles that can ensure effective ABS operation! With lift & lower valve Wheels and Tyres 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Electrics 24-volt, multi-chamber lights, yellow LED side marker lighting Two white position lights at front Two white/red lane position lights at rear 2 x 7-pin fail-safe sockets at the front, without connecting cables Rotating beacon with holder, operated via parking lights (beacon removable) Floor Approx. 30 mm thick phenolic ply boards, high point load capacity for forklift axle loads up to max. 7,100 kg Lsdpfxoy Slp Ie An Usab Steel/chequer plate covering in wheel arch area where required Front bulkhead/corner posts 25 mm aluminium hollow section profile, 1,950 mm high, steel corner posts, full height for volume version Approval / Signs With Dekra inspection and certificate Prepared for single-line number plate holder Warning sign according to ECE - 70 Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Attention, the images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000364, empty load weight: 6,120 kg, maximum load weight: 28,880 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: silver, Year of construction: 2022, Please note: The images are archive photos! The vehicle may still be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Maximum overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loaded loading height in the low bed approx.: 900 mm Internal width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping front low bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly inclined outer frame, new design with 'Load-Lock profile' for attaching lashing straps 'Patented Load-Lock-Cross' for lashing straps integrated in the cross member under the outer frame 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating support Free landing gear corner dimension and rear swing clearance approx. 1,920 mm Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards 9 pairs of lashing/rack rails transverse in the floor, embedded up to the main frame, approx. 100 mm high. With 20 mm round steel rails, top and bottom, distance between upper and lower rails approx. 60 mm (of the round steel). Bottom has angle plate, half open downward. For lashing and inserting stakes 80 x 80 mm (3 pairs in the neck, 6 pairs in the low bed section). 3 pairs of stake pockets recessed in the outer frame, approx. 72 x 42 mm internal dimension Axles & Suspension Drum brake axles according to manufacturer specification 'Axle/chassis laser-aligned' – reduces tire wear and fuel consumption Air suspension Brake System 2-line compressed air braking system Color-coded lines for easy service Spring-loaded parking brake 2 error-proof coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractors with functional ABS! With raise & lower valve Vehicle driving stability system Wheels and Tires 235/75 R17.5, manufacturer at discretion Steel rims, factory silver Electrical System 24V, multi-chamber lights, side-mounted yellow LED lighting (recessed) Lajdey Slhqopfx An Ueb 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin error-proof sockets at front, without connecting cable 1 additional LED work light at rear, operated via reverse light Floor Anti-slip phenolic plywood panels, approx. 30 mm thick, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / Corner stakes front 25 mm aluminum hollow profile, 1,350 mm high Country of registration / license plates Germany Inspection and certification in Bosnia 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Warning sign according to ECE - 70 Paintwork Frame: Hot-dip galvanized including passivation '15-year warranty against rust-through' Front corner stakes: Hot-dip galvanized Front wall: Aluminum

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003408, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 01/2015, next inspection (TÜV): 02/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2014, Attention: The images shown are archive photos! The vehicle may still be in use! Weights and Dimensions: Gross weight: 27,000 kg Payload approx.: 22,200 kg Aggregate load: 16,000 kg Stated fifth wheel load: 11,000 kg Unladen weight approx.: 4,800 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Skeletal trailer for freight forwarding Fine grain steel welded construction, fifth wheel plate with replaceable 2" kingpin 13 pairs of lashing rings recessed in the outer frame, each rated at 2.5 t Outer frame features "Load Lock Profile" for attaching lashing straps 24 t two-speed landing gear, single-sided operation, with straight lower section, without compensator Wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Quarter fender mudguards Axles & Suspension 1st axle: SAF drum brake, 2nd axle: BPW drum brake Air suspension Ljdpfsy Sk U Ajx An Usab Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connection cable Note: This trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve Vehicle Stability Control System Wheels and Tyres 385/55 R19.5, manufacturer at OEM's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side mounted yellow LED lighting set as far in-board as possible 2 white marker lights at the front 2 white/red lane position lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Floor Phenolic resin-coated plywood approx. 30 mm thick, cross-joints with Omega inlay, on longitudinal bearers for high point load capacity for forklift axle weight up to max. 7,100 kg Note: Floor deformation due to weather influences possible! Front Bulkhead/Corner Posts Bulkhead height: 1,200 mm, corner posts made of steel in volume design, with "viewing windows" Approval / Signs Country of registration: Germany With DEKRA inspection and report 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE-70 Contour marking with reflective strips in accordance with ECE R 048, white on the sides, red at the rear Painting Frame: RAL 3002 Carmine Red Landing legs: black coated Front bulkhead: RAL 3002 Carmine Red Attention: The images shown are archive photos! The vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702011668, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 10/2013, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2013, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross weight: 27,000 kg Payload approx.: 22,200 kg Aggregate weight: 16,000 kg Stated fifth wheel load: 11,000 kg Tare weight approx.: 4,800 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis - Semitrailer for Forwarding High-tensile steel welded construction, fifth wheel plate with replaceable 2" king pin 13 pairs of lashing rings recessed into the outer frame, each with a 2.5-ton capacity Outer frame with "Load-Lock profile" for lashing strap attachment 24-ton twin-speed landing gear, single-sided operation, straight lower part, without compensating link Wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, galvanized steel Quarter-shell mudguards Axles & Suspension BPW disc brake axles Air suspension Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable couplings at the front, without connecting line EBS, Electronic Brake System with EBS socket at front, no connecting cable Caution: This trailer may only be towed by towing vehicles that ensure effective ABS operation! With lift/lower valve Laedpoy Sk Szofx An Uob Vehicle stability control system Wheels and Tyres 385/55 R19.5" make at manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber tail lights Side yellow LED lighting as deeply recessed as possible 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cables Floor Anti-slip phenolic plywood, approx. 30 mm thick, cross joints with Omega inserts, on longitudinal supports for high point load resistance (for forklift axle load up to max. 7,100 kg) Note: Floor warping due to weather influences possible! Front Bulkhead / Corner Stakes 25 mm aluminium hollow profile, approx. 1,200 mm high, steel corner stakes in volume design, with 2 "inspection windows" Approval / Signs Country of Registration: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective tape in accordance with ECE R 048, white on sides, red at rear Paintwork Frame: RAL 3002 carmine red Landing gear: Black coated Front wall: RAL 3002 carmine red Attention, the images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003406, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 10/2013, next inspection (TÜV): 01/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2013, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross vehicle weight: 27,000 kg Payload approx.: 22,200 kg Axle load: 16,000 kg Stated fifth wheel load: 11,000 kg Unladen weight approx.: 4,800 kg +/- build tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, mounting plate with replaceable 2" king pin 13 pairs of lashing rings recessed in outer frame, each rated 2.5 t Outer frame with “Load-Lock profile” for securing straps 24 t two-speed landing gear, single side operation, with flat base plate, without compensating slide Chocks with holder Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards Document box on front wall, left-hand side (mounted slightly sloped) Axles & Suspension BPW disc brake axles Air suspension Braking System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, no connecting line EBS, Electronic Braking System, with EBS socket at front, without connecting cable Attention: The trailer may only be towed by tractor units equipped with functional ABS! With lift and lower valve Vehicle Stability Control System Wheels and Tyres 385/55 R19.5” – make at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt; multicompartment rear lights (3 sets of older Hella lights still available at plant for optional installation); lateral yellow LED markers recessed as far as possible 2 white front position lamps, each protected by 12 mm round bar welded over the top 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cables Lasdsy Sk Rqepfx An Ujb Floor Approximately 30 mm phenolic plywood, cross joints with Omega insert, laid on longitudinal supports for high point-load capacity, suitable for forklift axle load up to max. 7,100 kg Note: Floor warping due to weather exposure possible! Front bulkhead / Corner posts Approx. 1,200 mm high, corner posts made of volumetric steel Approval / Plates Country of registration: Germany With Dekra inspection and report 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective strips in accordance with ECE R 048, white (sides) and red (rear) Paintwork Chassis: RAL 3002 carmine red Landing legs: Black coated Front bulkhead: RAL 3002 carmine red Attention: The images are archive photos! The vehicle may currently be in use!

Condition: excellent (used), Professional precision lathe from the renowned German manufacturer PROXXON. Model PD 400 is designed for precision machining of metal, aluminum, brass, plastics, as well as small steel components. The machine is in very good technical and visual condition. It operates quietly and smoothly. The package includes a comprehensive set of accessories as shown in the photos, including lathe tools, documentation, drill chuck, and BISON lathe chuck. Ideal for workshops, model making, servicing, small-batch production, and precision work. Technical data: • Manufacturer: PROXXON • Model: PD 400 • Power supply: 230 V / 50–60 Hz • Spindle speed range: 80 – 2800 rpm • Motor power: • 240 W at 1400 rpm • 550 W at 2800 rpm • Speed control: 2 ranges • Lathe chuck: 3-jaw BISON Lodey Sidpepfx An Usab • Tailstock with drill chuck • Precision guide bed • Handwheels with vernier scale • Chuck guard • Forward/reverse spindle rotation Included: • PROXXON PD 400 lathe • BISON lathe chuck • Drill chuck • Lathe tools • Spare inserts/tools • Documentation and manual • Wrenches and accessories as shown in the photos Condition: Used, in very good condition. Shows normal signs of use. Complete machine, ready for operation. Applications: • Precision turning • Model making • Machining of small metal parts • Mechanical workshops

Condition: like new (used), Year of construction: 2023, Tindo Cooking Kettle 400L Year 2023 Capacity 400 Ltr Fully stainless steel Tipping facility Ledpot Tx Dlefx An Usab Terminal fluid jacketed vessel Variable speed mixing control Vertical lift on head As new condition Only used for product testing

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702018968, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2016, The images shown are archive photos! The vehicle may currently be in use! 2-axle flatbed semi-trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Perm. / technical gross weight: 27,000 kg Perm. / technical payload approx.: 23,000 kg Perm. / technical axle load: 16,000 kg Perm. / technical fifth wheel load: 11,000 kg Unladen weight approx.: 4,000 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Maximum overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation measurement approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consists of: Chassis: Spedition semi-trailer frame Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with "Load-Lock profile" for lashing strap attachment, note: to attach straps when side walls are fitted, the side walls must be opened! Lajdpfxsy Rxmws An Uob 14 pairs of lashing rings, each rated to 2.5 t 24-t, 2-speed landing gear, operated from one side, with straight base, without equalizer Without support legs Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards Axles & Suspension: SAF disc brake axles Air suspension Braking system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket front, without connection cable Attention: The trailer may only be towed by tractors capable of ensuring the ABS functions correctly! With raise & lower valve Vehicle stability system Wheels and Tyres: 385/55 R19.5” – make according to manufacturer’s choice Steel rims, factory silver Electrics: 24 Volt, multi-chamber tail lights, amber LED side marker lamps 2 white position lights at the front with protective bar 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at front, without connection cable Floor: Anti-slip phenolic plywood floor approx. 30 mm thick, cross joints with Omega insert, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front bulkhead/corner posts: 25 mm aluminium hollow profile, approx. 1,350 mm high, corner posts made of steel, high volume design, with “holes” for forklift drivers Approval / Markings: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for one-line license plate holder Warning sign according to ECE-70 Conspicuity markings with reflective tape according to ECE R 048; side in white, rear in red Painting: Frame: RAL 3002 carmine red Landing gear: Black coated The images shown are archive photos! The vehicle may currently be in use!

Condition: excellent (used), axle configuration: 2 axles, first registration: 07/2007, loading space length: 7,280 mm, loading space width: 2,490 mm, loading space height: 2,900 mm, suspension: air, wheelbase: 1,810 mm, color: other, Year of construction: 2007, = Additional options and accessories = - Rear doors = Remarks = Tail lift: Dhollandia DHSM.10, slider lift, 1000 kg WFDFLT21871000571 Ledpfxsymqd So An Uoab 7.28 x 2.49 x 2.90 = More information = Make axles: BPW Suspension: air suspension Axle 1: Tyre profile left: 55%; Tyre profile right: 55% Axle 2: Tyre profile left: 55%; Tyre profile right: 55% Make of bodywork: TRS Iceland Technical condition: very good Visual appearance: very good Registration number: WX-TZ-33 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037031, empty load weight: 4,795 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 09/2025, next inspection (TÜV): 08/2026, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, color: grey, Year of construction: 2025, These images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, in basic lightweight design, kingpin plate with replaceable 2" kingpin, Curved front end "Patented" 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Support wedges with holder Underrun protection, foldable Half-shell fenders Integrated "fender holder," surface resistant to stone chipping with anti-splash flaps only on the last axle Tarpaulin rod with holder Towing hook at the rear (not on Revolution model) Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking system 2-line compressed air braking system Ljdpey Rrpljfx An Ueab Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Automatic tilting lowering with shut-off valve "TPMS" tire pressure monitoring system - display on the tractor unit, via EBS, without truck installation (the truck must have the necessary prerequisites. Only on base tires). Wheels and tires 385/65 R22.5" Steel rims Electrical system 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain tractor units, false diagnoses may occur, although the function is given) Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable Additional LED work light, integrated and recessed at the rear, switched via reversing light Hydraulics Low-pressure cylinder max. 170 bar Operation hydraulically via truck auxiliary drive Bins Aluminum box body made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents spillage. Inside with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic bin shape "Membrane" - rear wall Rear wall as a hinged flap with "double-hinge hinge," externally mounted with double hook lock. Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, connecting plate for air/electrical and brake connections with large clearance for optimal operability. Roll tarp, can be folded to the right side, with central locking on the left side Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod, so that it is not attacked and rusted by the material.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031191, empty load weight: 4,900 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 08/2024, next inspection (TÜV): 09/2026, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, tire size: 385/65 R 22,5*, color: grey, Year of construction: 2024, The images shown are archive photos. The vehicle may still be in use! Chassis: Semi-trailer tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2'' kingpin Patented curved front panel 24-ton 2-speed landing gear, single-side operation, with straight base, with lateral compensation 2x wheel chocks with holders Side underrun protection: aluminium Rear underrun protection, foldable 6x half-shell mudguards Integrated "mudguard holder" with stone-repellent surface 2x with anti-spray flaps (only on the last axle) Axles & Suspension 3x SAF disc brake axles Axles in off-road specification "Axles/chassis laser aligned" – reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and traction aid, activated by "braking 3x". (Traction aid functional up to 30% axle overload and up to a max speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" – 10-year warranty against corrosion Braking System 2-line compressed air braking system Coloured line routing for easy servicing Spring-actuated parking brake 2 fail-safe coupling heads at the front, without connecting line EBS by Haldex, electronic braking system with EBS socket at the front (without connection cable) Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! With raise & lower valve Vehicle stability system Wheels and Tires 6x 385/65 R22.5", manufacturer’s choice 6x steel rims, manufacturer’s choice Electrics 24 volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, nominal width 48 mm. (without hose connection) Actuation hydraulically via truck PTO Body / Tip Body Aluminium box body, high-quality abrasion-resistant material Sloped front wall, 5 mm thick, with external cylinder mount Lsdpfoy Rl Unox An Ueab Side walls made of 30-mm hollow-chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Internal access on front wall (not in combination with Cramaro). Shovel and broom holder on outside of front wall Greenline – conical, aerodynamic box shape "Membrane" tailgate Tailgate: pendulum door with double-joint hinge, externally mounted, double hook lock Tailgate with rubber seal Note: Heat-resistant up to 170°C max! Floor: continuous 5 mm, Brinell 110 Note: Only suitable for transporting sand, chippings and gravel, max grain up to 20 mm! All other goods excluded from warranty! Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with hard chrome-plated piston rod to avoid corrosion and pitting. The stated gross weight is technically feasible; depending on load, the actual gross weight may not be achievable within the legal axle, support, and fifth-wheel loads. (Improper load distribution may impair driving and tracking behavior) Paint Finish Frame: DB 7350 Novagrey "10-year warranty against corrosion" Landing gear: black coated Body: natural aluminium Roller tarp: RAL 7035 light grey

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031190, empty load weight: 4,900 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 08/2023, next inspection (TÜV): 03/2027, loading space length: 9,300 mm, loading space width: 9,300 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, tire size: 385/65 R22,5, color: grey, Year of construction: 2021, The images are archive photos. The vehicle may still be in use! Chassis Semi-Tipper Fine-grain steel welded construction, lightweight design, fifth wheel with replaceable 2" kingpin Curved front panel "Patented" 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without sliding compensation 2x wheel chocks with holder Side underrun protection made of aluminum Underride guard, foldable 6x half-shell mudguards Integrated "mudguard holder" surface repels stones 2x anti-spray mud flaps on the last axle only 2x tow hooks at rear Axles & Suspension SAF disc brake axles Axles in off-road design "Laser-measured axle/chassis" reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and start aid, operated by "braking 3x" (start aid functions up to 30% axle overload and maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" with 10 years’ warranty against corrosion Brake System 2-line compressed air brake system Color-coded tubing for easy servicing Lsdpsy Rlvrjfx An Uoab Spring-loaded parking brake 2 foolproof coupling heads at the front, without connection line EBS by Haldex, electronic braking system with EBS socket at the front, without connection cable Note: The trailer must only be towed by vehicles that guarantee ABS functionality! Including raise/lower valve Vehicle stability control system Wheels and Tyres 6x 385/65 R22.5" tyres, brand at manufacturer’s discretion 6x steel rims, brand at manufacturer’s discretion Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin foolproof sockets at the front, without connection cables Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body (Tipper) Aluminum box-type body made of high-quality, wear-resistant material Inclined front wall 5 mm thick, with external cylinder mount Side walls made of 30 mm hollow chamber profiles, fully welded, with bulk-material-repelling top rail profile. Inside with access steps on front wall (not available with Cramaro configuration) Shovel and broom holder outside on front wall Greenline – conical and aerodynamic body shape "Membrane" tailgate Tailgate as swinging flap with "double joint hinge", externally mounted with dual hook locking mechanism Tailgate with rubber seal Floor throughout 5 mm thick, Brinell 110 Note: Only suitable for transporting sand, gravel, and pebbles with a maximum grain size of up to 20 mm! All other goods are excluded from warranty! Roll tarpaulin can be stowed on right-hand side, with central lock on left-hand side Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with hard-chromed piston rod to prevent corrosion by materials The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable within axle/support/saddle load limits. (Poor driving and trailing behavior may result from incorrect load distribution) Paint finish

Condition: excellent (used), Catalogue number 7259 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 200 mm - Shaft width: 530 mm - Shaft diameter: 550 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 50x50 mm - 2 lower toothed feed shafts - Lower shaft motor: 2.2 kW - Upper toothed feed shaft - Upper shaft motor: 2.2 kW - Conveyor belt feeder: 0.55 kW - Feeder belt length: 3000 mm - Feeder belt width: 410 mm - Main motor: 45 kW - Auto-reverse - Reverse operation - Machine dimensions (L/W/H): 2900x1600x1600 mm - Feeder dimensions (L/W/H): 3070x720x670 mm - Weight approx. 3500 kg ADVANTAGES Laodpfx Anoy Nytie Ueb – German manufacture – Auto-reverse (adjustable) – Reverse function – Used shredder in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on exchange rate 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 08/2006, suspension: air, color: orange, Year of construction: 2006, = Additional Options and Equipment = - Retarder = Remarks = Scania R440 Highline 4x2 - Retarder + Schmitz/Fliegl livestock trailer - 2-deck - tail lift - water & ventilation system - 2x steering axle Manufacture Year: 10-12-2013 & 30-8-2006 Mileage: 654,674 km VIN: YS2R4X20002091493 & WFDFLT23561000630 Scania Euro 5 Opti Cruise automatic transmission Retarder 2-deck livestock trailer Tail lift Water system Climate system 2x steering axle = Further Information = Laodpfxey Dc I Ee An Ujb General Information Mileage: 654,674 km Cab: sleeper cab Technical Information Engine power: 324 kW (440 HP) Gross vehicle weight: 35,000 kg Drivetrain Fuel type: Diesel Transmission Gearbox: Opti Cruise, 12-speed, automatic Axle Configuration Suspension: air suspension Rear axle 1: Max. axle load: 10,000 kg; steered Rear axle 2: Max. axle load: 10,000 kg; steered Functional Body brand: Scania Environment Emission class: Euro 5 Condition Technical condition: good Visual condition: good

Condition: used, functionality: limited functionality, machine/vehicle number: WFDFLT33902030059, empty load weight: 7,452 kg, maximum load weight: 27,548 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: black, Year of construction: 2023, The images shown are archive images; the vehicle may still be in use! Weights and Dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Permissible / technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 7,452 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer for Forwarding Fine-grain steel lightweight welded construction, up to the landing legs, fifth wheel plate with replaceable 2" king pin. Prepared lashing rings integrated into the floor (max. 13 pairs) 24-ton two-speed landing gear, single-sided operation, straight lower part, without load equaliser Pull-out ladder at rear Door retainers on the sides Wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mud flaps Foldable fender for lighting unit Quarter shell mudguards Rear impact protection Axles & Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle, including forced lowering and start assist, activation via triple brake application Brake System Two-line compressed air brake system Colour-coded line routing for easier servicing Spring-loaded parking brake Two fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at the front, no connecting cable Wheels 385/55 R22.5" Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cables SB Hydraulics Hydraulic cylinder with sliding unit integrated in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Capacity: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l SB Tipper Body Lasdpfswk Dc Rsx An Usb Aluminum box-type tipper body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow sections, welded with a wide special reinforcement profile around the top and a special reinforcement frame at the bottom. Sliding bulkhead for improved unloading of cargo, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow sections as a two-leaf door, split 1/2 to 1/2, framed all round with a special U-profile with stop and rubber seal, fitted with two external rotary bar locks, locked at top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left side in direction of travel. Including a swivelling crossbar at the top. Standing platform with ladder access on both sides (left/right in direction of travel) and guardrail for opening and closing the roof tarpaulin Removable, swivelling crossbars for tarpaulin support + tarpaulin support at front bulkhead and at rear wall. Roll tarp can be stored on one side with two longitudinal tension belts, 3 ratchet tension belts on the side. The tarp is fastened with hooks and rubber ropes at the front bulkhead and above the rear doors; features

Condition: used, first registration: 09/2016, color: other, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - BPW-Assen - Drum brakes - Lift Axle = Remarks = Fliegl, 2016, BPW axles, Axle 1 Liftable, Drum brakes = Dealer information = Laedpfxoy Avafe An Ujb Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, empty load weight: 4,150 kg, maximum load weight: 15,850 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 7,000 mm, loading space width: 2,500 mm, loading space height: 1,020 mm, loading space volume: 17 m³, total length: 7,000 mm, suspension: steel, tire size: 235/75 17,5, tire condition: 80 %, color: silver, Year of construction: 2022, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 410401 Fliegl, ZPS200K * Year of manufacture: 2022 * ABS, Anti-lock Braking System * Air connection coupling head (red + yellow) * Electrical connection plug 2x7-pin * Storage box / toolbox * Galvanized * Pneumatic locking * Suspension: leaf springs Laedjy D E Ubspfx An Ujb * Gross vehicle weight: 20,000 kg * Unladen weight: 4,150 kg * Payload: 15,850 kg * Permissible gross weight: 20,000 kg * Axle manufacturer: SAF % * Tire condition 1st axle: 80%|80% -- 80%|80% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 80%|80% -- 80%|80% - Tire size: 235/75 R17.5 * Tire size: 235/75 R17.5 * Internal dimensions: L=7000 mm, W=2500 mm, H=1020 mm * Internal volume*: 18 m² * Pallet spaces: 17 * Suitable for roll-on and skip containers * Roll-off containers 5000-7000 mm length * Lowerable drawbar * Compartment for loading ramps * External dimensions * Ride height: 1020 mm * Platform length: approx. 7000 mm * Pneumatic locking * Duomatic air connection Disclaimer: Subject to changes, prior sale, and errors excepted. More photos and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / Sale / Rental of commercial vehicles * Fast, uncomplicated financing * Application for all (export) documentation * Arranging export / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our qualified staff for advice – we are happy to assist you.

Condition: used, empty load weight: 4,150 kg, maximum load weight: 15,850 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 7,000 mm, loading space width: 2,500 mm, loading space height: 1,020 mm, loading space volume: 17 m³, total length: 7,000 mm, suspension: steel, tire size: 235/75 17,5, tire condition: 80 %, color: silver, Year of construction: 2022, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41040 Fliegl, ZPS200K * Year of manufacture: 2022 * ABS, Anti-lock Braking System * Air connection coupling head (red + yellow) * Connector plug 2x7-pin * Storage box/toolbox * Galvanized * Pneumatic locking system * Suspension: Leaf spring * Gross vehicle weight: 20,000 kg * Unladen weight: 4,150 kg * Payload: 15,850 kg * Permissible total weight: 20,000 kg * Axle manufacturer: SAF% * Tire condition 1st axle: 80%|80% -- 80%|80% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 80%|80% -- 80%|80% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Internal dimensions: L=7000 mm, W=2500 mm, H=1020 mm * Internal volume*: 18 m³ * Pallet spaces: 17 * Suitable for roll-off and skip containers * Roll-off containers 5000–7000 mm length * Lowerable drawbar * Storage compartment for drive-on ramps * External dimensions * Ride height 1020 mm * Platform length approx. 7000 mm * Pneumatic locking * Duomatic air connection Liability disclaimer: Subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing options * Handling of all (export) documentation * Ordering of export license plates/customs plates Laedpfey D E Uhox An Uob * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV approval, registration services * Transportation of commercial vehicles Contact our trained staff—we are happy to advise you.

Condition: used, total length: 1,220 mm, total width: 400 mm, total height: 2,000 mm, load capacity per storage section: 150 kg, We are offering used shelving racks here. TECHNICAL DATA Manufacturer: Nedocn Model: Shelf N Frame height: 2,000 mm (new) Shelf dimensions: 1,220 x 400 mm (used) Load capacity per level: 150 kg Number of shelf levels: 5 pieces Boltless assembly Diagonal bracing Tiered net prices per unit plus VAT: Starter Bays: 1 - 5 units: €69.50 net each 6 - 20 units: €66.03 net each 21 - 50 units: €62.55 net each from 51 units: €59.08 net each Add-on Bays: 1 - 5 units: €47.50 net each Ledpfx Ajy Dgglon Ueab 6 - 20 units: €45.13 net each 21 - 50 units: €42.75 net each from 51 units: €40.38 net each PLANNING Our sales team will be happy to provide you with a non-binding quotation tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the equipment. PAYMENT TERMS Payment terms are to be agreed upon at the time of order. All prices are per unit/net prices or as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for commerce, industry, and skilled trades. We continuously offer attractive deals on used equipment from various manufacturers at competitive conditions. Please do not hesitate to contact us if you have any questions. Four wins – The four success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.