Used Fiebig E80 Fs for sale (1,638)

Condition: new, power: 368 kW (500.34 HP), axle configuration: 6x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (by phone). Iveco AS260S50Y/FS CM 6x2 BDF Swap Body Chassis Redpfx Asyhyh Hedzscf Axle configuration: 6x2P, 3 axles, trailing axle. Cab type: AS MY. Emission level: Europe. Engine: Cursor 13, 500 HP, Euro VIe. Transmission: 12-speed HiTroniX, automated. Permissible gross weight: 26 t. Drive axle variant: SR, single reduction, single axle. Full air suspension. Disc brakes. Steered trailing axle, single tires. Vehicle variant: Container chassis CM. Vehicle set-up: ON. Wheelbase: 4,800 mm. Model year: 2024. Engine speed: 1,650 rpm. Emission standard: EURO VI E. Tires: 315/70R22.5. Speed limiter: 90 km/h. Electrically operated roof hatch (transparent with MLL high roof). Standard black front grille. Manually operated cab tilt. Mirror cams with cover on AS. FHS in vehicle color. Front underrun protection for chassis with a gross weight over 7,490 kg. Plastic bumper. AS high roof cab. Electronic immobilizer and 2nd vehicle key. Dashboard design: plastic with black trim. COC: EC whole-vehicle type approval. Digital tachograph 4.1. Air compressor: 2-cyl., 630 ccm, with integrated clutch, demand controlled. Smart generator 2880 W (24V x 120A), demand controlled. SR-SOLO LIGHT 17x. Rear shock absorbers. Weight variants: front axle 8,000 kg / rear axle 11,500 kg (technically possible: 12,000 kg) / trailing axle 7,500 kg (technically possible: 8,000 kg). Standard overall train brake. Front axle stabilizer. Standard applications. Exhaust pipe outlet to the left. Air filter unit under cab. Lift control for trailing or leading axle (TX/P). Ride height with 2 settings. Rear underrun protection omitted. Trailer version for use with continuous braking system. Rear crossmember, D-value: 130 kN. Trailer socket for 24 volt operation, 15-pin. Rear axle ratio: i = 2.31. Connectivity box 4G incl. TCO service contract. Engine idle shutdown. Tire pressure monitoring system (TPMS), internal sensors. VDI interface for telematics services, version 4.0. Infotainment 10" TFT display. Gearbox software ECO-Roll (coasting function). GPS cruise control Hi-Cruise. Drowsiness warning system (Driver Drowsiness Attention Warning). Warning triangle compliant with ECE-27 directive. Hill start assist (Hill Holder) for easy hill starts. Electronic Stability Program (ESP). Reversing camera monitoring system. Blind spot monitoring system (BSIS) on the right. Intelligent Speed Assistant (ISA). Front area monitoring (MOIS). Emergency brake assist (AEBS). Pre-installation for alcohol interlock (ALC) with cable. NOISE ECE 51/03. Standard EU vehicle width. ECAS air suspension with 2 sensors. Speedline aluminum wheels, SLT. Plastic parts of the cab painted in cab color. Left and right luggage compartments. Transparent sun visor mounted outside on cab roof. Additional diesel/water heater, 4 kW. Fully automatic air conditioning in combination with stationary air conditioning. Standard refrigerator and storage box. Leather steering wheel. With curtains at the bed. Signal horn behind bumper (compressed air). Foldable table in passenger area. One-piece lower bed, firmness: hard. Upper bed with continuous mattress. Ashtray in center console. Electrical pre-installation for tail lift operation, ...

Condition: used, mileage: 716,490 km, power: 338 kW (459.55 HP), first registration: 03/2018, fuel type: diesel, empty load weight: 12,040 kg, maximum load weight: 13,960 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, color: red, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space volume: 44 m³, loading space length: 7,370 mm, loading space width: 2,550 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, tail-lift, traction control, trailer coupling, Color: Blood Orange IC 053, unladen weight: 12,040 kg, permissible total weight: 26,000 kg, cargo space (L W H): 7,370 mm x 2,550 mm x 2,350 mm, tire size: 315/70 R22.5, cargo space volume: 44 m³, 1st axle: , 2nd axle: , 3rd axle: , seats: fabric, air suspension, rear liftgate: aluminum, type: BÄR BC2500S4V, liftable/steerable axle, intarder, digital tachograph, electronic braking system EBS, brake assist, electronic stability program ESP, anti-slip regulation ASR, adaptive cruise control ACC, auxiliary heater with timer, driver's seat: air-suspended, driver's seat: height-adjustable, driver's armrest, heated driver's seat, radio/CD, hands-free Bluetooth, lane keeping assist, reversing camera, multi-function leather steering wheel, lumbar support for driver, electric windows, fog lights, exterior mirrors: electric and heated, central locking with remote control, rear differential lock, underrun protection, sun visor, dual tires, - 1 previous owner - vehicle inspection/emissions test expired/due - lift/steer axle - fully air-suspended - INTARDER - Intarder, errors and changes excepted. Rcodpfszvzr Rox Adzjf

Condition: used, Year of construction: 2009, operating hours: 12,395 h, Equipment: all wheel drive, Internal vehicle number: G400017 Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova New Holland E80 BMSR-2 Crawler Excavator | 8.6 t | Grab | 2 Digging Buckets For sale: a used New Holland E80 BMSR-2 crawler excavator, manufactured in 2009. The machine is equipped with a Lehnhoff MS08 quick coupler, a dozer blade, air conditioning, and a comprehensive range of attachments. The scope of delivery includes two digging buckets with cutting edges of 400 mm and 900 mm, as well as a 600 mm grab. Technical specifications: * Manufacturer/Model: New Holland E80 BMSR-2 * Machine type: Crawler excavator * Year of manufacture: 2009 * Operating hours: 12,395 hours * Engine: Isuzu * Engine power: 42 kW Redpfx Adeyvm Awozecf * Operating weight: 8,590 kg * Product identification number: LF05-04329 * CE marking * Air conditioning * Dozer blade * Vehicle number: G400017 * Condition: Used * German machine Equipment and attachments: * Lehnhoff MS08 quick-coupler system * Digging bucket with 400 mm cutting edge * Digging bucket with 900 mm cutting edge * Grab, 600 mm * Dozer blade * Air conditioning Inspection and functional testing are possible by prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale reserved. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Year of construction: 1996, condition: ready for operation (used), A complete liquid egg and egg product pasteurization plant by Südmo/KMA is available. Main processes: egg breaking, filtration, pasteurization, cooling, homogenization. 1) Sanovo Type 3000 egg breaking machine, year of manufacture: 1991. 2) Südmo/KMA K21-FS/4235 pasteurization plant, year of manufacture: 1996, medium: liquid egg, throughput: 1500l/h, temperature profile: 15°C/64°C/6°C, cooling medium: ice water, ice water temperature: 1°C, ice water demand: 7500l/h, heating medium: hot water, hot water temperature: 65°C, hot water demand: 5000l/h, heat recovery: 70%, holding time: 360s. 3) APV Gaulin homogenizer. 4) Terlet process tank, volume: 10m³. 5) Clivet WSAT-XIN 30.2 water chiller, year of manufacture: 2018, refrigerant: R-410A, refrigerant charge: 9kg. Including pumps, agitators, tanks and additional accessories. Documentation available. An on-site inspection is possible. Rcjdpfx Adjzidh Iozef

Condition: ready for operation (used), Travel X/Y/Z: 1400mm/1000mm/1000mm, table dimensions X/Y: 1600mm/850mm, max. table load: 2500kg, speed: 4000rpm, spindle power: 22kW, feed: 20m/min, spindle taper: ISO50. Machine dimensions X/Y/Z: approx. 4300mm/2500mm/2600mm, weight: approx. 10000kg. An on-site inspection is possible. Rjdpfx Aoy Hk Ulodzocf

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Suitable for lifting two EURO pallets in a single lift. Load capacity: 2,000 kg Effective lifting height: 3,500 mm Connection: 400 V / 16 A / 3.0 kW Rodpfxszl Uvbe Adzocf Dimensions: 1,500 x 1,800 x 3,700 mm Weight: approx. 1,300 kg

Year of construction: 2020, condition: good (used), functionality: fully functional, DESCRIPTION/FEATURES: 5-color offset printing press for labels, with an inline flexo unit and die-cutting. The machine is equipped with: • Unwinding unit • BST web guide • UV LED drying (5) • Turning bar Rcsdpfx Aozrxdpedzjf • Offset units: 5 • Flexographic unit • BST registration camera • Automatic washing system • for ink rollers • Automatic plate loading system • Semi-rotary die-cutting unit with magnetic cylinder • Rewinding unit with slitting (blades) • (shearing) • Inking console + CIP 3 for automatic color adjustment • Cooling unit for ink fountains • CCD plate punching table • Automatic registration

Condition: new, Year of construction: 2025, Holzkraft Combined Jointer-Planer Machine - available immediately - Ideal for demanding craftsmen and carpenters The particularly long, one-piece jointer tables allow for easy surfacing of workpieces Work tables are made of gray cast iron, making them durable and permanently level Rear-opening jointer tables with spring support for quick and convenient setup changes Thanks to the permanently mounted dust extraction hood, no repositioning of the extraction hose is necessary during setup changes, saving valuable working time Helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the planer outfeed ensures even wood discharge Material feed with four speeds Planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Preparation for mortising attachment Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total length of tables 2250 mm Chip removal max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter Planer 1 x 120 mm Drive power Main motor 7 kW Installation Information Rcsdpfx Adsih Dxdszjf Space requirement Length 2250 mm Space requirement Width/Depth 1440 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Planer Planer table Length 850 mm Planer table Width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Chip removal max. 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min Location: In stock at 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), Year of construction: 2025, Jointer-thicknesser with TERSA quick-change system for planer blades. With TERSA quick-change system for blade changes in seconds. TERSA planer blade system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and even material feed. Robust jointer tables made of ribbed cast iron, milled and stress-relieved, making them insensitive and permanently flat. Large, swiveling fence for precise jointing, can be repositioned at 90°/45°, with quick-clamp. Jointer table opens to the rear. Powerful motor. Robust steel/cast iron construction. Long-hole drilling device can be retrofitted. Equipment details: TERSA planer blade shaft. No more adjusting and screwing. Blade changes in seconds. Self-locking. Particularly quiet. Perfect planing result. Jointer Standard equipped with TERSA quick-change system for planer blades. Large-sized jointer tables. The jointer and thicknesser tables made of cast iron guarantee maximum smoothness and vibration-free operation. Thicknesser With the powerful thicknesser feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. Changing from jointer to thicknesser is done in seconds with a single action. Drive Sturdy chain drive. Drive sprockets made of steel. Solid cast iron bearing housing. Planing unit Solid anti-recoil devices prevent the workpiece from kicking back. 3-blade TERSA shaft ensures an optimal planing result. Special equipment features Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. Scope of delivery: Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. TERSA planer blade shaft. Model: minimax fs 30g TERSA Article No.: 5503036 Technical data ---Technical data, jointer--- Total length of tables: 1200 mm Feed table length: 580 mm Table height: 900 mm Working width: 300 mm Max. chip removal: 3 mm ---Technical data, thicknesser--- Dimensions of thicknesser table: 450 x 300 mm Min./max. working height: 3/200 mm Feed speeds: 6 m/min. Planer shaft diameter / planer blades: 62 mm / 3 pcs. Speed: 5500 rpm Motor 400V/50Hz/S6 40%: 1.8 kW Extraction nozzle diameter: 2 x 120 mm Rjdjdqy Uqjpfx Adzscf Weight: 140 kg

Condition: new, Year of construction: 2025, FS 41 classic Tersa – Jointer-planer with TERSA quick-change cutterhead system With TERSA cutterhead for ultra-fast cutter blade changes TERSA cutterhead system enables particularly quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed The particularly long, one-piece jointer tables allow for easy planing of workpieces Large jointer fence can remain in its position when the jointer tables are opened Rear-opening jointer tables The high machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/cast iron construction Model: FS 41 Classic Tersa Item No.: 5503414 Technical data ---Technical data, jointer--- Total length of tables: 1800 mm Feed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. chip removal: 4 mm ---Technical data, planer--- Dimensions of planer table: 605 x 420 mm Min./max. working height: 3 / 230 mm Rsdpocnxaysfx Adzocf Feed speeds: 7 m/min Cutterhead diameter/cutter blades: 72 mm / 3 pcs. Speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 hp) Dust extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa cutterhead No more adjusting and screwing Cutter blade changes in seconds Self-locking Particularly quiet Planing unit Massive anti-kickback devices prevent workpiece kickback 3-blade Tersa cutterhead for optimal planing result Wood feed Helically toothed steel infeed rollers for a constant and uniform wood feed without marks 13 teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Dust extraction hose connection The dust extraction ports of the jointer (1) and planer (2) point in the same direction The hose connection is made from only one side No hose is needed that extends around the machine

Condition: new, Year of construction: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Planer cutterhead Type TERSA Number of planer cutters 4 pcs Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Sturdy chain drive Drive gears made of steel Solid gray cast iron bearing block Two feed speeds Standard with two feed speeds Comfortably selectable from the operator panel Material feed Rcedpfxjhkz E Te Adzjf Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Optional equipment Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables enable easy planing of workpieces. The work tables are made of gray cast iron, making them robust and permanently flat. Rear, simultaneously opening planing tables with spring support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, it is not necessary to disconnect and reconnect the dust extraction hose during adjustments, which saves valuable working time. The helically toothed steel infeed roller ensures a constant and uniform feed of the wood. The rubber outfeed roller at the end of the thicknesser ensures a uniform outfeed of the wood. Material feed with four speeds Thickness planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thickness planer table height adjustment and digital display On/off switch in operator position Rcjdsff Hdpspfx Adzof Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Preparation for long-hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Maximum chip removal 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction nozzle diameter (thicknesser) 1 x 120 mm Drive power Main motor 7 kW Installation information Space required (length) 2250 mm Space required (width/depth) 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thicknesser Thickness planer table length 850 mm Thickness planer table width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planing cutterhead Type TERSA Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Year of construction: 2025, Jointer-Thicknesser minimax fs 41es TERSA Maximum configuration for the professional user. Rcjdpfx Aelht Htodzjf Article number 5503431 Brand Holzkraft / SCM Helically toothed steel infeed roller for consistent and uniform material feed, enabling chip removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious woods. Models with a TERSA cutterblock for seconds-fast planer blade changes and particularly quiet operation. Material feed with two speeds. Particularly long jointer tables enable easy and precise jointing of workpieces. Work tables made of grey cast iron, annealed and stress-free, making them insensitive and permanently flat. Tables that open simultaneously towards the rear for short setup times. Thickness table adjustment via handwheel with numerical display for planing height. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/grey cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product) approx. 2200 mm, Net weight approx. 450 kg Width/Depth (product) approx. 1160 mm Jointer Total length of tables 2200 mm, Jointer fence length 1200 mm Working height 905 mm, Jointer fence height 150 mm Chip removal max. jointer 5 mm Connection for dust extraction Dust extraction nozzle diameter thickness 1 x 120 mm Thicknesser Thickness table length 775 mm, Working height thickness max. 240 mm Thickness table width 410 mm, Chip removal max. thickness 5 mm Working height thickness min. 3 mm Electrical Data Power drive motor 5 kW, Mains frequency 50 Hz Connection voltage 400 V Planer cutterblock Planer cutterblock type TERSA, Planer cutterblock speed 5000 min⁻¹ Planer cutterblock diameter 95 mm, Planing width max. 410 mm Number of planer blades 4 pcs Feed Feed speed 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Description Technical Data Scope of Supply Accessories Equipment Options Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables allow for easy planing of workpieces. The work tables are made of cast iron, making them durable and ensuring they remain perfectly flat. Planing tables that open simultaneously towards the rear, with spring-assisted support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, there is no need to change the dust extraction hose during adjustments, saving valuable working time. The helically toothed steel infeed roller ensures constant and uniform wood feed. The rubber outfeed roller at the end of the thicknesser ensures uniform wood discharge. Material feed with four speeds. Planer/thicknesser table adjustment via handwheel with integrated display for planer height. On/off switch in operator position. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Prepared for mortising attachment. Quality – Made in Italy. Dimensions and Weights Length approx. 2250 mm Rsdpfx Ajff Hdmjdzscf Width/Depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Chip removal, max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter, thicknesser 1 x 120 mm Drive power Main motor 7 kW Installation Information Space required, length 2250 mm Space required, width/depth 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thickener Thickening table length 520 mm Thickening table width 850 mm Working height, min. 3 mm Working height, max. 240 mm Working length, min. 220 mm Chip removal, max. 5 mm Electrical Data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min⁻¹ Planer width, max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: as good as new (ex-display), Year of construction: 2025, Holzkraft FS 30 Classic Tersa Planer-Jointer with Tersa cutterhead and planer knives - quick-change system The Tersa planing knife system enables knife changes in seconds and ensures particularly quiet operation. Helically toothed steel infeed roller for consistent and even wood feed. Extra-long planer tables. Large fence can remain in its position when the planer tables are opened. Rcjdpfxjbuldys Adzsf Planer tables open towards the rear. High machine weight. Powerful industrial motor. Robust steel and cast iron construction. Total length of the tables: 1510 mm Feed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. chip removal: 4 mm Dimensions of thickness table: 565 * 300 mm Min./max. working height: 3/230 mm Feed speeds: 7 m/min Planer spindle diameter / planer knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 hp) Dust extraction nozzle diameter: 2 * 120 mm Scope of delivery: Tersa planer cutterhead Anodized fence Available from stock in Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2003, Bed milling machine, lightly used with approximately 4000 hours. XYZ: 2000 x 1000 x 1000 mm Heidenhain: 530 TNC with HR 410 handwheel Spindle: 2.5 x 2.5 degree double swivel, 4000 RPM, ISO 50 Options: Temperature cooler Coolant chiller Linear scale in Y-axis Rcsdpfszt Sv Uox Adzsf IKZ 15 bar External cooling with 500 l ATC with SK 50 CNC rotary table with 600 mm diameter ZF gearbox Renishaw MP 10 Chip conveyor (longitudinal) Foot pedal Coolant control cabinet

Condition: used, TECHNICAL DETAILS - Magnetic table : 400 x 150 [mm] - Automatic plunge - Power : ~5 [KW] EQUIPMENT - Hydraulical unit - Coolant system with paper filter Rcedpfx Adsvq Sf Iezef

Condition: used, Year of construction: 2008, centre height 400 mm centre distance 2.000 mm turning diameter over bed 810 mm control WEILER D3 turning diameter over slide rest 510 mm turning length 2.000 mm spindle head DIN55027 Gr.11 spindle diameter 150 mm spindle bore 106 mm Turning Speed - Range 1 1 - 450 U/min. power capacity at 60% / 100 % load 37,00 / 30,00 KW max. torque at 60% / 100% load 3.205 / 2.599 Nm Turning Speed - Range 2 4 - 1.800 U/min. power capacity at 60% / 100 % load 37,00 / 30,00 KW max. torque at 60% / 100% load 813 / 659 Nm face slide travel 410 mm upper slide-support travel 140 mm longitudinal feed 0 - 5 mm/U face feed range 0 - 5 mm/U. power feed longitudinal 20.000 N feeding force facing 10.000 N rapid travel - longitudinal/face 10 / 5 m/min tool taper Capto C6 tailstock quill diameter 115 mm tailstock quill stroke 225 mm tailstock quill taper MT 6 thread - mm pitch 0,1 - 250 mm thread - inch 1/4 - 56 inch. thread - module total power requirement 36,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 6,00 x 2,50 x H2,20 m Rjdpezugf Hefx Adzjcf Control WEILER D3 Three-jaw chuck ROEHM DURO 630 powered tools (Capto C6) chip-conveyor

Condition: used, Year of construction: 1998, Surface grinding machine Manufacturer: Geibel + Hotz Type: FS 40 AC Year of manufacture: 1998 Rcsdpfx Aewcym Aedzjf Table length: 400 mm Table width: 200 mm Maximum workpiece weight on the table: 150 kg Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Machine weight approx.: 1,050 kg Machine dimensions L x W x H: 1,800 x 1,200 x 2,250 mm 3826

Condition: good (used), Year of construction: 2017, operating hours: 1,997 h, fuel type: hybrid, color: white, Weights Empty weight: 6.100 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 3.300 cm Dimensions of cargo space: 740 x 125 x 199 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1900 m Production country: DK Additional information Please contact Vink Machinery for more information Falcon Spider FS330Z Rodpfezg Nyqex Adzecf * 2017 * 1197 working hours * Diesel and Battery * 33 meter working height * 19 meter horizontal reach * 200 kg lifting capacity * Automatic outrigger * Remote control * 6100 kg own weight * Including documents

Condition: ready for operation (used), KSB ETABLOC-G 50-160/114 ID: 48862505 pump with QU FS 90S4A-60 H motor, serial number: 163752M, used, in good condition, 100% functional, scope of delivery as shown in the photos. Rcsdpfx Adozh Sc Rszef

Condition: used, functionality: fully functional, Felder FS900K edge sanding machine Sanding belt width: 150 mm Sanding belt length: 2200 mm Sanding belt oscillation Rodozu Il Ijpfx Adzjcf Motor power: 3 kW

Condition: good (used), Year of construction: 1990, functionality: fully functional, G & H FS 40 SA, Year of manufacture: 1990, Grinding length: 400 mm, Redpfxezpwywe Adzscf Grinding width: 200 mm, Working height: 320 mm, Electric facing device, Cross clamping, Cross stop.

Condition: good (used), Fiber optic measuring amplifier, fiber optic sensor, fiber optic sensor with digital sensor -Output: 1 -Connector: M-8 -Expansion unit: PNP -Weight: 0.2 kg Rcodpfjb A N Unsx Adzjf

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers Redpfxsd Subuo Adzocf -OLEO hydraulic buffer -Type: 21 - M FS - 100 -Stroke: 150 mm -Piston rod: Ø 76mm -Dimensions: 151/151/H584 mm -Quantity: 3 hydraulic buffers available Price: per piece -Weight: 18 kg