Used Faccin 4Hel 2100 X 28/22 Mm for sale (98,728)

Condition: used, Radial drilling machine with table WEBO type HRH 100 / 3000 Machine No. 10009555/7 -- 1110185 -- 6046 -- Year of manufacture 1979 Drilling capacity: Ø 100 mm in ST 60 at a feed rate of 0.5 mm/rev. Nominal overhang: 3000 mm Maximum overhang: max. 3100 mm Spindle mount: MK 6 Spindle speed: 22.4 - 1600 rpm, 36 steps Feed rate: 0.05 - 2.5 mm/rev, 18 steps Distance spindle - baseplate: 970 - 2335 mm Quill stroke: 325 mm Swivel range of the arm: 360° Ndjdpfx Aqefbt Huswea Traverseable on bed, bed length: 7500 mm Clamping area of the table: 8000 x 2100 mm - Electric central clamping device - Drilling unit on the machine bed, traversable lengthwise by electric motor - Table consisting of 2 clamping plates with 7 x T-slot, (length 4000 x width 2100 x plate thickness 360 mm) Space requirement L x W x H: 8000 x 4550 x 4300 mm Maximum height: 4300 mm Transport height (bed with drilling machine): approx. 3150 mm Transport weight (bed with drilling machine): approx. 20 tons Transport dimensions table: L x W x H 4000 x 2100 x 900 mm (2 plates stacked on top of each other) Transport weight table: approx. 14 tons Good condition

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 60 t, stroke length: 160 mm, operating speed: 10 mm/s, reverse speed: 90 mm/s, throat depth: 320 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, Standard Equipment Stroke: 160 mm Daylight (Distance between upper and lower dies): 380 mm Throat Depth: 320 mm Bending Length: 2100 mm Distance between Columns: 1700 mm Machine Features Double-cylinder upper beam bending system Steel frame and upper beam construction providing high static and dynamic rigidity Upper beam movement supported by fiber slide bearings High-strength balance shaft and eccentric bearing system for maintaining parallelism Motor-controlled angle adjustment with a mechanical stroke system within the cylinders Wide working clearance suitable for using different dies Tonnage adjustment and bottom dead center stop via NC control unit Hydraulic safety system against overpressure Dual-speed operating system consisting of free descent, bending, and fast return CE-compliant multi-functional foot pedal and emergency stop system Compact hydraulic power unit with HAWE or Rexroth components Remote service support with Siemens, Pizzato, and Balluff electrical equipment LEUZE safety system and learning mode NC control unit with 500 programs and 200 lines of memory per program Easy program loading and downloading via USB Standard upper and lower die set NC-controlled motorized X-axis back gauge (600 mm) Linear guide and programmable back gauge system 0.2 mm positioning accuracy Motor-controlled Y-axis angle adjustment Mobile control panel Front support arms with linear guides Lower die centering and fixing bolts Programmable precision back gauge retraction function Optional Equipment Motorized R-axis Custom bending dies Dual-hand and foot-controlled special pedal system DSP or FIESSLER safety systems Extended back gauge distance Additional back gauge fingers Additional front support arm Manual crowning system Motorized crowning system Ndedpfx Aozcmbfjqwoa Technical Specifications Bending Force: 60 Tons Maximum Bending Capacity: 4 mm Bending Length: 2100 mm Distance between Columns: 1700 mm Stroke: 160 mm Bending Speed: 10 mm/s Idle Descent Speed: 90 mm/s Throat Depth: 320 mm Daylight: 380 mm Table Width: 100 mm Table Height: 845 mm Main Motor Power: 7.5 kW X-Axis Motor: 0.75 kW Y-Axis Motor: 0.37 kW Optional R-Axis Motor: 0.25 kW Back Gauge Distance: 600 mm Oil Tank Capacity: 120 L Machine Length: 2450 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 4340 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 100 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 40 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B100-2100 – 100 Ton x 2100 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Distance between upper and lower die (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance between columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D touchscreen graphic display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Back Gauge System X-axis travel: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European-Type Quick Tooling Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Special Short Lower Table 70 mm or 90 mm lower table T-slots can be applied according to the tools to be used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Njdpfx Aqszbrf Towjda Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Frame Design Black plexiglass protective panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel in accordance with VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measuring system Supports the operator Optional Features CT-BEND Servo Motorized X + R Axis Back Gauge System Servo motorized X and R axis movement X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis can be extended up to 1000 mm AKAS II Front Safety Laser System + Rear Light Curtains Finger protection system Laser-based safety system Increases operator safety CE compliance Maximum working distance: 4.3 meters Delem DA66T CNC Control Unit (17” Touchscreen) 17” 2D touchscreen graphic display 2D drawing and 3D visualization / product simulation User-friendly interface 1 GB hard drive Automatic bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction Windows-based operating system 2 USB ports Data backup Offline Profile-TL programming feature Technical Specifications Bending Force: 100 Ton Bending Length: 2100 mm Distance between columns: 1600 mm Stroke: 210 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 5000 kg Main Motor Power: 5.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 60 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 410 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B60-2100 – 60 Ton x 2100 mm CNC Hydraulic Press Brake The HPB B60-2100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precise sheet metal bending applications, offering a bending force of 60 tons and a bending length of 2100 mm. Standard Features Stroke: 260 mm Daylight (Distance between lower and upper die): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance between Columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSSTECH Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Quick Die Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slots can be applied according to the tools to be used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Frame Design Black plexiglass protection panels Wide field of vision Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel conforming to VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measurement system Supports the operator Optional Features Servo Motorized X + R Axis Back Gauge System Servo motorized X and R-axis movement Nodpozbrfaefx Aqwsda X-axis travel distance: 750 mm Accuracy: ±0.05 mm X-axis can be extended up to 1000 mm AKAS II Front Safety Laser System + Rear Light Curtains Finger protection system Laser-based safety system Increases operator safety CE compliance Maximum working distance: 4.3 meters Delem DA53Tx CNC Control Unit (15” Touchscreen) 15” color touchscreen 2D product drawing and simulation Angle correction calculation Angle measurement and correction USB data transfer Data backup Offline profile-TL programming Remote access and fault management Technical Specifications Bending Force: 60 Ton Bending Length: 2100 mm Distance between Columns: 1600 mm Stroke: 260 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 4290 kg Main Motor Power: 5.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Ndedpfxod Eqg He Aqwea Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Nedpfx Aqsiink Sjwoda FACCIN AP package CNC control PGS-ULTRA

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Nsdpezguumsfx Aqwsda Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 2000 mm 11 mm 11 mm 7 mm 8 mm 6.4 mm 225 mm 215 mm 165 mm 8 m/min 3950 mm 1200 mm 1200 mm 4450 kg Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Ndsdeypbp Ropfx Aqwsa Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guide for the movement of the lower rolls Ultra wide rolls blocks "MCS" bearing system for the lower rolls (4 large bearings on each shaft) Central lubrication system Pressure manometer for constant pinch roll control Extra torque and special braking system Safety cord with emergency stop Equipped according to "CE" regulations OPTION: CNC control Siemens PSG-Absolute with 15" touch screen (automatic calculation of the process for simple and complex shapes)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: 052022-28888-03, overall weight: 2,700 kg, total length: 13,500 mm, load capacity: 5,000 kg, working height: 6,000 mm, Equipment: documentation/manual, Verlinde 5,000 KG single-girder overhead crane in new condition. 2 units available. - Span: 13,227 mm - Lifting capacity: 5,000 KG - Lifting height: 6 m Ndodpfx Aqezbyiaowoa - Year of construction: 2022 - Control: radio-controlled Autec - Crane documentation: available Speeds: Crane travel: 2 - 32 m/min. (Frequency controlled) Trolley travel: 5 / 20 m/min. (Relay controlled) Lifting/lowering: 0.80 / 5.00 m/min. (Relay controlled) Delivery, customization, installation, inspection, and commissioning are all possible upon request. If this crane isn't exactly what you're looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all stock is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Vahle conductor bars Keywords: overhead crane, bridge crane, Abus, Demag, Kone, Konecranes, Stahl

Condition: new, Year of construction: 2025, diameter 28 mm length 75 mm clamping range 70-75 mm The price is exclusive of statutory VAT. Also available in D28 x 50 mm (clamping range 45–50 mm). Clamping range: 70–75 mm Type: Ball Lock Pin 75 mm Diameter: 28 ± 0.02 mm Material: 45# steel Hardness: HRC28–32 Surface roughness: Ra 0.8 µm GERD WOLFF's ball lock pins are specialized fastening elements designed for integration into various welding table systems and setups. Their primary function is the efficient and precise positioning and securing of workpieces. These pins are compatible with welding tables from all manufacturers featuring 28 mm bore holes. The unique ball-lock design enables flexible alignment of workpieces at different angles and positions. Thanks to high-quality craftsmanship and robust construction, GERD WOLFF's ball lock pins provide reliable holding force throughout the entire welding process. These pins ensure easy handling, quick clamping, and release of workpieces — no additional tools required. GERD WOLFF stands for quality and precision in welding technology. These ball lock pins are engineered to meet the demanding requirements of professional welding applications. Quick release locking pins, quick lock pins, quick releases, quick installation Njdsuia Ngspfx Aqwsda pin, metal horizontal quick release, working pin, quick release locking pin, quick latch pin, locking quick release pins.

Condition: new, Year of construction: 2025, diameter 28 mm length 50 mm clamping range 45-50 mm The price is exclusive of statutory VAT. Also available in D28 x 75 mm (clamping range 70–75 mm). Clamping range: 45–50 mm Type: Ball Lock Pin 50 mm Diameter: 28 ± 0.02 mm Material: 45# steel Hardness: HRC28–32 Surface roughness: Ra 0.8 µm GERD WOLFF ball lock pins are specialized fastening components designed for integration into a wide range of welding table systems and setups. Their main function is the efficient and precise positioning and securing of workpieces. These pins are compatible with welding tables from all manufacturers that feature 28 mm bore holes. The unique ball-lock design enables flexible alignment of workpieces at various angles and positions. Thanks to their high-quality manufacturing and robust construction, GERD WOLFF ball lock pins provide reliable holding force throughout the entire welding process. These pins allow for easy handling, fast clamping, and release of workpieces — without the need for additional tools. Ndedpfoymf Urox Aqwoa GERD WOLFF stands for quality and precision in welding technology. These ball lock pins are engineered to meet the high demands of professional welding applications. Quick release locking pins, quick lock pins, quick releases, quick installation pin, metal horizontal quick release, working pin, quick release locking pin, quick latch pin, locking quick release pins.

Condition: used, plate width 3200 mm plate depth 2250 mm plate height 420 mm weight of the machine ca. / t Clamping plate Dimensions: 3200 x 2250 x 420 mm T-slot dimensions: ? x ? x ? (H) The images are for illustrative purposes only. More pictures will follow. Njdpfsud Iqbox Aqwsda

Condition: good (used), Machine foot, machine feet, spring elements, silent blocks, vibration dampers, steel spring vibration dampers, vibration isolators -Spring elements: 2 steel spring vibration dampers for machine tools and systems -Spring element: Ø 128 mm -Total height: 215 mm Ndedpfezt Igcox Aqwea -Submission/Price: complete -Dimensions: Ø 128 x 215 mm -Weight 4.8 kg/piece

Condition: used, color: other, Year of construction: 2004, Carrying capacity: 5 kg Lifting capacity: 5 kg Serial number: 4610/04 Equipped with an electric hoist Hoist brand: Abus Load capacity: 5 metric tons Nsdpjzuwtbsfx Aqwjda Span: 12,875 mm Single-girder construction Clear height under the bridge: 5,000 mm Power supply: 400 volts, 50 Hz Includes remote control Includes documentation and electrical schematic Radio-controlled remote Collision protection Two fixed hoisting speeds - Dual drive at the top - No rails required; the crane moves across the floor An interesting selection of overhead cranes and semi-gantry cranes from renowned brands. Brands: ABUS, Demag, and KONE Lifting capacity: 5, 10, 15, and 20 metric tons Span width: up to approximately 30 meters Years of manufacture: 1989 through 2012 Models: overhead cranes and semi-gantry cranes The lots will be loaded onto your transport. The price is listed for each lot. If desired, transportation can be arranged for an additional fee. View the full selection, technical specifications, and auction terms on the auction page The online auction opens Sunday 16 August and closes Friday 28 August. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, color: other, Year of construction: 2009, Carrying capacity: 5 kg Lifting capacity: 5 kg Serial number: 16/890553 CE-certified: yes Equipped with an electric hoist Nedpfxjzuwr Dj Aqwoda Hoist brand: Abus Load capacity: 5 metric tons Span: 12,875 mm Single-girder construction Clearance height under the bridge: 5,000 mm Power supply: 380 volts, 50 Hz Lifting speed: 0.8 & 5 m/min Traversing speed: 5 & 20 m/min Travel speed: 10 & 40 m/min Includes remote control Radio-controlled remote Collision protection Two fixed hoisting speeds - Dual drive at the top - No rails required; the crane moves across the floor An interesting selection of overhead cranes and semi-gantry cranes from renowned brands. Brands: ABUS, Demag, and KONE Lifting capacity: 5, 10, 15, and 20 metric tons Span width: up to approximately 30 meters Years of manufacture: 1989 through 2012 Models: overhead cranes and semi-gantry cranes The lots will be loaded onto your transport. The price is listed for each lot. If desired, transportation can be arranged for an additional fee. View the full selection, technical specifications, and auction terms on the auction page The online auction opens Sunday 16 August and closes Friday 28 August. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: new, Year of construction: 2023, pressure 6,2 t chamfer lenght 285 mm mm distance between columns 230 mm dayligth 215 mm throat 70 mm stroke 100 mm Nedozlulcspfx Aqweda working feed 9,8 mm/sec return speed 50 mm/sec quantity of oil 10 l Control DELEM DA 41T total power requirement 0,7 kW weight of the machine ca. 250 kg dimensions 900 x 1300 x 550 mm Demonstration Machine â?¢ Basic C-frame design â?¢ Compact benchtop model â?¢ Ideal for prototypes and small production runs â?¢ Very short setup time â?¢ Functionally simple â?¢ Wide range of applications â?¢ Low noise level â?¢ Low power consumption â?¢ Easy to operate Includes optional equipment: - DELEM DA 41T CNC control

Condition: good (used), Plastic shaft, plastic material, plastic wave, shaft material made of plastic, round bar -Manufacturer: Röchling, POM-C plastic shaft, solid material, round bar -Type: Sustarin-C natura Ø 280 mm l -Item No.: 141275 -Length: 445 mm -Dimensions: Ø 280 x 445 mm Ndedozh Ddyjpfx Aqwoa -Weight: 40 kg

Condition: good (used), gear, gears, gear shaft, pinion shaft -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 42 mm / 14 teeth -Tooth width: 83 mm -Dimensions: see photo technical drawing Njdowcxtzopfx Aqwjda -Number: 9x gear shaft available -Price: per piece -Total dimensions: Ø 42 x 220 mm -Weight: 0.9 kg/piece

Condition: good (used), Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Leveling elements: 5 pieces, for machine tools and systems Nedpofzlutsfx Aqwsda -Price/Sale: complete -Dimensions: Ø 220 x 167 mm -Total weight: 34.5 kg

Condition: excellent (used), Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, endless conveyor belt with Z-step connection -Width: 400 mm -Length: 4280 mm -Thickness: mm -Quantity: 1 conveyor belt available Price: per piece -Transport dimensions: 440/290/H260 mm -Weight: 5.7 kg/pc. Nedpfoit Rl Nex Aqwsda

Condition: good (used), Wet grinding stone, column grinder, column grinder Nodpfx Aqocmh H Uewjda -Wet and dry sander -Grinding wheels: 220 x 40 mm -Motor: 0.55 kW -Speed: 600 rpm -Dimensions: 650/300/H1200 mm -Weight: 80 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Nicotra, fan, blower, radial fan -Type: 12/9 DD Nsdpfx Aqjy Tt Twoweda -Motor: Aertenica 1.5 kW 1360 rpm -Fan wheel: Ø 235 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 215 mm -Dimensions: 520/490/H400 mm -Weight: 25 kg

Condition: good (used), Fan, blower, radial fan -Manufacturer: AMA, fan, radial fan -Type: Motor 25105109 -Power: 0.6 kW / 2800 rpm -Voltage: 220/380 V -Fan wheel: Ø 225 x 70 mm -Dimensions: Ø 300 x 370 mm -Weight: 13.2 kg Nodpfx Aqjupphmswoda

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table Nodpfx Aeqddi Ujqwoda -Clamping table: milling machine table -Table surface: 600 x 220 mm -Y-axis: 130 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 45 mm -Total dimensions: 690/490/H300 mm -Weight: 72 kg

Condition: good (used), Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, steep conveyor, steep conveyor belt -Conveyor belt: conveyor belt, VA housing -Speed: 8 m/min Njdpfjrkp Niox Aqwsda -Conveyor belt width: 280 mm -Conveyor belt length: 3490 mm, dimensions see technical photo. drawing -Outlet height: approx. 535 mm, height adjustable -Individual components: see photos -Total dimensions: 3500/590/H670 mm -Weight: 81 kg