Used Ergotech1000/430 Compact for sale (5,907)

Condition: new, maximum load weight: 92,045 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Dsdpfszzhfnex Aa Hokt 1 x Gooseneck: MAX710-Neck-V-30-2.70{DSR 2 700} Hydraulically extendable/retractable and detachable gooseneck. Length approx. 3,650 mm. For semi-trailer: 6 x 4 or 8 x 4 - Steel front panel approx. 400 mm high. - Aluminum side walls and rear panel, approx. 400 mm high, attachable to the gooseneck, in anodized finish. - 3.5-inch kingpin - Truck hydraulic connection with flow control (20 l/min), incl. gantry for suspending the supply lines; the semi-trailer tank must have a minimum capacity of 80 liters with MAX trailer couplings; otherwise, the customer must provide the couplings. - BEKA-MAX central lubrication system for a gooseneck with normal grease NLGI-2. - TPMS tire pressure monitoring system according to ECE R 141. - Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right (± 48 kg) - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. - Hydraulic connection lines between power pack and connecting plate on the gooseneck. - Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of the trailing axle steering, in addition to the cable remote control, with 2 LED indicator lights on the receiver for single-lane control. - Operation of raising/lowering the gooseneck - Operation of raising/lowering the suspension of the axles - Multi-coupling hydraulic connections on the gooseneck. - 1 LED work light, left and right, on the rear panel of the gooseneck with separate on/off switch. - Four warning panels, extendable by approx. ± 2,000 mm, approx. 423 x 423 mm, with one LED position light and mounting for a rotating beacon. (± 122 kg) 1 x 3-Axle Compact Front Axle: MAX710-Axle-PA-F-3-19.5-1.36-2.85 Hook connection at the front and rear. Length: approx. 3,560 mm Axle width: approx. 2,850 mm - Front axle with a separate air connection for air suspension. - BEKA-MAX central lubrication system for a 3-axle axle with normal grease NLGI-2. - One 7-pole socket, left and right, at the rear of the front axle for the warning panels. - TPMS tire pressure monitoring system according to ECE R 141. - 1 LED work light, left and right, at the rear of the front axle with separate on/off switch. - Surface of the front axle with a sand-coated finish for anti-slip protection. - Multi-coupling hydraulic connections on the front axle. 1 x Excavator Bridge: MAX710-Lowbed-BB-A-7.15-(430)-2.85 Telescopic excavator bridge BB-A with traversable bridge hooks at the front and a bolt-on coupling at the rear. Basic width: approx. 2,850 mm Length: approx. 7,150 mm Beam height: approx. 430 mm Beam width: approx. 1,350 mm Loading height approx. 580 mm with ground clearance approx. 150 mm 6 pairs of steel mats with rubber flooring approx. 1,000 mm, 1 pair approx. 500 mm (± 1,660 kg) - Screw-in option (ø approx. 40 mm) every approx. 500 mm on the outside of the upper chord of the outer tube of the excavator bridge for screw rings (LC 16,000 daN). - Screw-in option M30 every approx. 1,000 - 1,200 mm on the outside of the inner tube of the excavator bridge for mounting screw rings (LC 10,000 daN). - Folding widening sections with steel mats, adjustable in width from approx. 2,850 mm to approx. 3,250 mm. - TPMS tire pressure monitoring system according to ECE R 141. - 1

Condition: used, Year of construction: 2021, Overview This Twin Monkeys Cimarron is a compact automated canning system (monobloc can filler + seamer), built in 2021 by Twin Monkeys Beverage Systems (Denver, USA) and distributed and serviced in Europe by Agrovin. Designed for craft breweries, it fills and seams standard 0.33 L and 0.44 L beverage cans at up to 3,000 cans per hour in its current single-lane configuration. Cans run through a fully automatic cycle: air purge, filling, lid application under CO₂ and seaming. The low-oxygen filling system works with a fill tolerance of ±2 g and dissolved-oxygen pickup as low as 20 ppb; a wedge-style seamer (patent pending) closes the cans. All parameters are managed on the color touch-screen PLC, including automatic CIP wash cycles, cycle counters and operator help screens. The machine is still installed and in production and can be seen in operation. Technical data - Manufacturer: Twin Monkeys Beverage Systems (Denver, USA) - Model: Cimarron - Year of manufacture: 2021 - Machine type: automated canning monobloc (can filler + seamer) - Capacity: up to 3,000 cans/h in the current single-lane configuration - Can formats: standard 0.33 L and 0.44 L (Ø 66 mm); Slim / Sleek formats (Ø 52.8 mm) possible with optional change parts - Filling accuracy: ±2 g; dissolved oxygen as low as 20 ppb Dedpjzktv Rofx Aa Hjkt - Control: color touch-screen PLC incl. automatic CIP cycle - Compressed air (clean, dry): 90 psi / 4.5 cfm (approx. 6.2 bar / 127 L/min) - CO₂ supply: 20 psi / 1.0 cfm (approx. 1.4 bar / 28 L/min) - Materials: stainless steel AISI 304, anodized aluminium, technical plastics - Dimensions (L x W x H): approx. 2,000 x 875 x 1,860 mm - Weight: approx. 330 - 430 kg (depending on configuration) - CE marked Equipment - Fully automatic air purge, filling, lid application with CO₂ injection and seaming - Wedge-style seamer (patent pending) - Lid applicator with CO₂ curtain to minimise oxygen pickup - Product tank with automatic pressure regulation - Rejection of defective cans - Rotary accumulation table at the discharge (included, see photos) - Mobile stainless-steel frame on lockable casters - Expandable platform: additional filling heads can be retrofitted (manufacturer rating up to 6,000 cans/h with 10 heads) Condition Used - good working condition, built 2021. The machine is still installed and in regular production use at the current owner's site and can be visited and seen in operation by appointment. Availability Expected availability: April - May 2027 (the machine remains in production until then). Location: Spain.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0-261-07-3237, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, actuation type: electric, total height: 1,580 mm, total length: 4,780 mm, total width: 1,130 mm, overall weight: 1,630 kg, Equipment: CE marking, documentation/manual, I am offering a professional edge banding machine from Brandt, model Optimat KDF 430. * Brand: Brandt (HOMAG Group) * Model: Optimat KDF 430 * Year of manufacture: 2008 * Functions: Edge banding with EVA glue * Second glue tank for color changes * Diamond pre-milling cutter * Trimming unit * Pressure rollers * Circular saw for length trimming * Milling unit, top/bottom: rounding, chamfering, flush trimming * Corner rounding unit * Profile trimming blade * Surface trimming blade * Max. workpiece height: 60 mm * Max. edge thickness: 6 mm solid wood Dodpfxozrtbps Aa Hokt The machine is fully functional and ready for operation! Available from week 40/2026. Please feel free to contact me if you have any questions.

Condition: excellent (used), functionality: fully functional, MONDINI EVOLUZIONE SUPER E380VG PET Packaging Line for Solids and Liquids Dkjdpjwny Rxefx Aa Hst MONDINI EVOLUZIONE SUPER E380VG automatic packaging line, designed for filling and packaging solid and liquid products in PET containers, integrating different dosing and handling operations within a single industrial facility. The line combines a multi-head weighing and dosing system for solid products with stations for incorporating liquid components, enabling formulations in which the container contains a solid part and a covering liquid, sauce, brine, or other liquid component, depending on the installed configuration. Its construction, primarily in stainless steel, elevated platform, automatic transport systems, and safety enclosures, provides a complete solution for professional food packaging lines. MAIN FEATURES -Manufacturer: MONDINI -Model: EVOLUZIONE SUPER E380VG -Type: Automatic PET packaging line -Application: Solid + liquid products -Automatic container feeding system -Solid product dosing -Integrated multi-head weigher -Weight-controlled dosing -Independent system for liquid incorporation -Automatic container transport -Synchronized positioning at stations -Elevated platform for dosing equipment -Structure and processing areas mainly in stainless steel -Safety enclosures and protections -Continuous industrial operation -Integrable with inspection and end-of-line equipment PROCESS PET containers are automatically fed into the line and transported to the various processing stations. The solid product is fed to the multi-head weigher, where it is divided into different portions, and the appropriate combination is selected to achieve the target weight. Subsequently, the dose is discharged into each container. In a later stage, the liquid component can be incorporated, allowing the product to be completed before the final packaging operations. The line can be combined with: PET container feeders Multi-head weighers Liquid dispensers Product feeding systems Sealing/closing equipment Weight controllers Metal detectors Labelers Case packers and end-of-line equipment APPLICATIONS Particularly suitable for canning industries, manufacturers of ready meals, processed vegetables, pickles, and other food companies that need to package combinations of solid and liquid products. Depending on the installed configuration, it can be suitable for vegetables, legumes, olives, pickles, prepared products, and other foods with covering liquids or sauces. The combination of MONDINI EVOLUZIONE SUPER E380VG, multi-head dosing, and filling of solids and liquids provides an automated solution for PET packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2010, operating hours: 7,191 h, functionality: fully functional, machine/vehicle number: W09430219A2D38810, overall weight: 19,000 kg, We are selling our used Doppstadt shredder (year of manufacture 2010) with no warranty of any kind. The machine is ready for operation and is currently used in our facility for shredding disposable pallets and green waste. Dksdpjzv Hzwsfx Aa Hot

Condition: used, maximum load weight: 32,320 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2019, Equipment: ABS, Vehicle Description: Kögel S24-1 Cargo, Lifting Axle, BPW ECO Axles Air Compact, Edscha sliding roof, side curtains, mounted on both sides: Steel pallet stop strips with VarioFix hole pattern (bolted), VarioFix slotted frame, on both left and right sides in the direction of travel, for internal width 2,468 mm (loading height under outer rail is reduced by approx. 20 mm). Axle lift mechanism on axle 1, fully automatic, load-dependent axle lift control. Start assist: activation by pressing the brakes three times, 30% overload allowed up to a speed of 25 km/h. Plastic toolboxes EBS system 2S/2M with stability control program (includes ABS/ALB function). IDEM Telematics System BasicTrailer incl. GPS location monitoring, coupling status, EBS data. - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". Technical Data: Permissible total weight: approx. 39,000 kg Basic equipment unladen weight: approx. 5,920 kg Unladen weight of customized vehicle configuration: approx. 6,333 kg Bed length (internal): approx. 13,620 mm Bed width (internal): approx. 2,480 mm Rear through-loading width: approx. 2,480 mm Dksdpfxozxizxs Aa Hot Loading height unladen, level travel position: approx. 1,220 mm Loading height laden, level travel position: approx. 1,190 mm Vehicle height set at 290 mm Side through-loading height (internal): approx. 2,680 mm Height under roof (internal): approx. 2,760 mm Front overhang (ISO 1726): approx. 1,685 mm Front overhang radius (ISO 1726): approx. 2,040 mm Rear swing radius (contrary to ISO 1726): approx. 2,100 mm Fifth wheel coupling height: approx. 1,130–1,190 mm Chassis: Axle lift mechanism on axle 1, fully automatic and load-dependent. Start assist via triple brake actuation, 30% overload up to 25 km/h. BPW ECO Axles Air Compact assembly with disc brakes Ø 430 mm, ET 120. Air suspension with 180 mm lift. Tyres: 6 x 385/65 R 22.5 tyres, 160J (European brand of Kögel's choice). Steel rims 22.5 x 11.75, offset 120 mm (ET 120). Tarp: Tarp rope with two holders on the front wall Sliding tarp, quality approx. 900g/m², with over-center tensioning system, according to DAIMLER cargo securing standard (DL 9.5). Documents: - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". TECHNICAL DETAILS Gross weight: 39,000 kg Unladen weight: 6,330 kg Max payload: 32,670 kg Axle configuration: 3 Wheelbase: 6,390 mm Loading length: 13,620 mm Loading width: 2,480 mm Loading height: 2,710 mm First registration: 03/2019 Suspension: Air Color: Silver Tire size: 385/65R22.5 Features: ABS, EBS, Telematics A complete equipment list is available on request. Despite utmost care, errors in this advert cannot be excluded. Subject to prior sale and errors. Please request more information.

Condition: good (used), Bluhm Weber Legi-Air-4050S Labeling Machine 4.14.1 Basic Structure The system is designed as a closed aluminum profile frame and has a very compact design. The control cabinets are integrated into the lower part of the frame. The main valve manifold is located behind a service door below the control panel. The system includes four workstation stops. Operation is via a touchscreen. The control panel is mounted on the right side of the frame. A Bluhm Weber labeling system is used in the station; the Bluhm Weber documentation applies accordingly. 4.14.2 Operational Sequence - The incoming workpiece carriers with I/O modules are stopped, lifted (positioned), and contacted in substations 10.1 and 10.2. In these two stations, the I/O modules are automatically labeled. In substation 10.3, the I/O modules are automatically labeled. Label generation and content creation are automated, as is application to the devices. - After labeling is complete, the module is finalized in station 10.4. For this, it is stopped, lifted, and contacted. Following finalization, the workpiece carrier is automatically ejected from the station. Legi-Air 4050 RH Label Print and Apply System with Zebra ZE500-4 Print Module Motor-driven large roll unwinder Label rolls with a diameter of up to 430 mm and 900 linear meters of label web ensure long continuous production runs. Tandem operation ensures uninterrupted production. Applicator dies Quickly interchangeable applicator dies allow for the processing of label sizes ranging from small nameplates to DIN A5 EAN128 shipping labels. The Quick-Change option allows for format changes in seconds. Spring-loaded applicator dies compensate for uneven product surfaces, ensuring clean label application. Controller Bluhm Weber Standard Controller Zebra ZE500-4 Print Module Label Printer Standard Features • Print Methods: Thermal Transfer or Direct Thermal • Orientation: Right or Left • All-Metal Industrial Construction • 16 MB SDRAM, 64 MB Flash Memory • Applicator Interface • Transmissive and Reflective Media Sensors • Multi-Level Element Energy Equalizer™ (E3™) for High Print Quality • Real-Time Clock • Rotating Display • ZPL II™ – Universal Language for Zebra Printers Technical Specifications Maximum Print Width • 104 mm Media Specifications • Label and Carrier Width: 16 mm to 114 mm • Minimum Retraction Length: 13 mm • Minimum Non-Retraction Length: 6.5 mm • Minimum Stream Mode Length: 6.5 mm • Maximum Length: 990 mm • Maximum Continuous Media Length: 3810 mm mm • Ribbon width: 25.4 mm to 107 mm Resolution • 8 dots/mm (203 dpi) or 12 dots/mm (300 dpi) Maximum print speed • 305 mm per second (203 and 300 dpi) Technical specifications • Width: 245 mm • Depth: 379 mm • Height: 300 mm • Weight: 15.4 kg Dodpfxoibh Tks Aa Hokt Financing through our bank is also available. komplett-konzept.leasingo.de Further assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2017, condition: used, REF: MM6447 1 x Camline Palletising Systems Ltd cartesian automated palletiser. The palletiser automates the stacking process of products and goods that can otherwise be labour intensive and expensive, putting undue stress on workers. Dkodpfjzbkl Sjx Aa Hst Cartesian or ‘Pick and Place’ palletisers are characterised by the structural beams and axes which are used to ‘pick and place’ the items. They are very flexible machines and can move products in three directions, thus being used to create complex pallet patterns. Typically, one or two (sometimes more) products are collated on an infeed conveyor and collected with a gripping device, which then places them on to the pallet. Manufacturer – Camline Palletising Systems Ltd. Model – Compact Palletising System. Date of manufacture – 2017. Entry via conveyor and exit via manual removal of the pallet. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 32 Amps. Air pressure - 6 Bar. Overall dimensions - 2m wide x 2.7m deep x 4.4m high (approx.).

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 135 h, power: 55 kW (74.78 HP), motor manufacturer: Perkins, fuel type: diesel, first registration: 12/2022, color: red, overall weight: 3,350 kg, total height: 2,450 mm, total length: 3,500 mm, total width: 1,980 mm, machine/vehicle number: VBLA4T40020750413, Equipment: air conditioning, cabin, front power take-off, hydraulics, power shift gear, Compact, maneuverable – yet powerful and extensively equipped: Lindner Lintrac 75 LS – Financing options available. Engine: PERKINS Syncro 55 kW, 75 hp, 350 Nm 4 cylinders, 3600 cm³ Turbo-diesel engine Emission stage 5 Transmission: 15/16-speed ZF Steyr Power2 power shift transmission, 40 km/h Power take-off: load-sensing rear power take-off, 430/540/750/1000 rpm; front hydraulics with power take-off Top link with quick coupler, additional lift cylinder Dkodpfx Aaozb N Hne Hot Hydraulics: Bosch Rexroth high-performance pump, separate oil circuit Design fenders instead of rubber fenders, DAB+ radio, USB, Bluetooth Subject to prior sale – all information is non-binding. The accuracy and completeness of the information provided here are not guaranteed. Any warranty and/or liability is excluded. Deviations from the description above cannot be ruled out. We would like to point out that the subject of the purchase agreement will be exclusively the motor vehicle in its actual condition.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 8,334 h, load capacity: 7,000 kg, lifting height: 3,500 mm, fuel type: electric, mast type: simplex, construction height: 2,700 mm, fork carriage width: 1,500 mm, fork length: 1,600 mm, empty load weight: 10,430 kg, total length: 3,230 mm, drive type: Elektro, construction width: 1,520 mm, Compact forklift – Electric Load center: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 355/65-15, non-marking Rear tire type: Superelastic Dksdowgqq Hopfx Aa Hjt Rear tire size: 28x9-15, non-marking Battery voltage: 80V Battery capacity: 980Ah Battery year of manufacture: 2020 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease-purchase and financing options are available at favorable terms. We are also happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this ECF70-6C. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and custom design of forklifts from 8 tons upwards. We are also happy to offer consignment sales for your vehicle. Side shifter, fork positioner Fork positioner opening range: 430 / 1400 mm Battery: 80 V 980 Ah, year of manufacture: 2020

Condition: used, This listing is for the Avestin EmulsiFlex-C5 for homogenizer with sealed toolings and spares The unit is in full working condition and is ready for immediate use EmulsiFlex-C5 High Pressure Homogenizer The Avestin EmulsiFlex-C5 is a high-pressure, pneumatically powered homogenizer designed for laboratory-scale applications. It is ideal for processing small to medium sample volumes, from 7 mL up to 5 L/h, depending on the pressure applied. How It Works: High Pressure Homogenisation High pressure homogenisation is an efficient and easy-to-use technique for cell disruption and liposome/emulsion processing. The principle involves pumping the sample through a valve with a small aperture. The sample transitions from very high pressure (up to 30,000 psi) on the pump side to atmospheric pressure on the outlet side. This sudden drop in pressure creates intense shear forces, disrupting cell membranes or dramatically reducing liposome/emulsion sizes. For cells, the pressure-induced shear forces rupture the membranes, effectively lysing the cells. For liposomes and emulsions, this process reduces their size from micron to nanometer range, often resulting in uniform particles with narrow size distributions. Unique Features of the EmulsiFlex-C5 Dynamic Homogenising Valve The C5 uses a dynamic homogenising valve, which maintains constant pressure during sample processing. This consistency ensures the formation of highly uniform liposomes and micro-emulsions, with tight particle size distributions. Efficient Cell Disruption Most cells (including E. coli) can be lysed in a single pass, minimizing over-processing and reducing the risk of protein denaturation or degradation. Pressure Range: Adjustable from 500 to 30,000 psi Flow Rate: 1–5 L/h depending on pressure Minimum Sample Volume: 7 mL Holdback Volume: Less than 1 mL Temperature Control: Can be used with ice baths, external chillers, or in cold rooms Autoclavable: Easy cleaning and sterilization (SIP-compatible) Compact Size: 430 × 160 × 320 mm, 25 kg Power Source: Requires compressed or bottled air. For most applications (e.g., E. coli disruption or liposome formation), 100 psi air pressure is sufficient. Dodjxhgawspfx Aa Hskt Applications Disruption of bacterial, yeast, algal, insect, or mammalian cells Nano-sized liposome and emulsion formation Particle size reduction in pharmaceuticals, cosmetics, and food products Liposomal drug delivery systems Efficient homogenisation for biochemical and biophysical research

Year of construction: 2017, condition: good (used), Single Compact K-160-9-24 160° C medium Water 11 KW year 2017 price: 4.950 € contact: Mr. Rainer Eckerle Dksdpforupr Djx Aa Hot

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M 09.10.288, product width (max.): 700 mm, product length (min.): 120 mm, input voltage: 400 V, working height: 850 mm, input frequency: 50 Hz, Equipment: documentation/manual, Kallfass Universa 700 – Fully-Automatic Side Sealer + KALLFASS Schrinktunnel COMPAKT650 D Industrial packaging machine for shrink-wrapping larger products such as picture frames, furniture, insulation material and similar goods. Manufactured by Kallfass Verpackungsmaschinen GmbH (Germany), CE certified. Key specs: Max. production speed: up to 65 packs/min Cross seal bar width: 750 mm Max. sealing frame height clearance: 300 mm Min. product length: 120 mm Film: centre-folded or flat, 12–80 micron; reel diameter up to 400 mm, width up to 900 mm Permanently heated seal bar with exchangeable sealing ledge, maintenance-free, PLC temperature control Siemens S7 PLC with colour touchscreen operator interface (multi-language) Power: 400V, 50Hz, 3-phase, 3.5 kVA Dimensions: approx. 2500 x 1400 x 2100 mm Colour: Kallfass Anthracite Complete with original technical documentation and CE declaration of conformity. Dksdpezwld Hsfx Aa Hst

Year of construction: 2026, condition: like new (used), functionality: fully functional, machine/vehicle number: 95-14-16, As new Compact spiral freezers for sale 2 Available Built in 2026 457mm wide stainless steel belt with overlay Dkjdpszrwngefx Aa Het Ashworth Omni grid Belt 95mm Product gap 155 Tier pitch Main drive - 4Kw 1600 diameter drum Goedhart Freon evaporator Available with refrigeration Message and we will send over the full spec with more photos

Condition: used, Without plug Dodpfxjzzpgys Aa Hekt

Condition: used, Year of construction: 2000, functionality: fully functional, We are offering this used Heidenhain LE 430 M control unit, Heidenhain TNC430, manufactured in the year 2000. The control unit comes from a Hermle C1200 (3-axis) machine. Dkedpfezwc I Asx Aa Hjt We also offer additional axis cards and axis motors from this machine. The machine was in operation in production until it was dismantled and was fully functional. (The machine bed had a crack.) Model: LE 430 M Identification No.: 324 993-29 Serial No.: 7 841 168 Version: V8 If you have any questions or need more information, please send us a message or call us.

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, X-Floc EM400/440 Insulation Blowing Machine Professional high-performance blowing machine designed for processing a wide range of loose insulation and fibre materials. Suitable for open blowing, dry injection, damp-spray applications and material conveying, it can be used both on construction sites and as part of a stationary production system. The machine is equipped with a large loading hopper of approximately 1,000 litres, capable of holding around 5–6 standard bags of insulation material. Four rotating shredder shafts progressively break up and condition the compacted fibres before transferring them into the rotary airlock. The adjustable airlock feed gate allows precise control of the material flow. Depending on the version and material used, the EM400/440 can reach a processing capacity of up to approximately 1,600 kg/h. The adjustable air system delivers a maximum pressure of 540 mbar, with an air volume of approximately 100–430 m³/h for the EM400 and up to 100–680 m³/h for the EM440. Main features: Suitable for different insulation and fibre materials Two-stage material conditioning system Four high-speed shredder shafts Approx. 1,000-litre loading hopper Adjustable material flow with 10 feed-gate positions Low-dust loading system with transparent strip curtains Connection for external dust extraction Remote adjustment of air and material parameters Robust, low-maintenance industrial construction Easy access to internal components for servicing Direct NW 76 mm hose connection Suitable for mobile or stationary applications The machine can be operated using a cable or optional wireless remote control, allowing the operator to adjust air output, material supply and pressure-control functions directly from the working area. Technical data: Processing capacity: up to approx. 1,600 kg/h Maximum pressure: 540 mbar Hopper volume: approx. 1,000 litres Shredder shafts: 4 Dsdpfjzlggxox Aa Hskt Dimensions: approx. 1,285 × 1,000 × 1,800 mm Filling height: approx. 1,250 mm Hose outlet: NW 76 mm EM400 power: approx. 7.5 kW EM440 power: approx. 10.5 kW Weight: approx. 425 kg for EM400 / 445 kg for EM440 Maximum conveying height: approx. 20–45 m for EM400 / 20–60 m for EM440 Optional equipment may include a wireless remote control, pressure-relief valve, internal or external air amplifier, suction drum and dust-extraction system.

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, total width: 1,050 mm, total length: 1,360 mm, total height: 1,830 mm, overall weight: 300 kg, empty load weight: 300 kg, input voltage: 400 V, machine base height: 100 mm, number of previous owners: 1, type of input current: AC, construction width: 1,050 mm, Equipment: documentation/manual, type plate available, We are selling a DIMA Compact 100 in as-new condition. The machine produces up to 100 kg of mozzarella per hour, depending on the product manufactured and the availability of curd. It features a very compact design. Hot water and a three-phase power connection must be provided on site. The machine can shred, knead, and shape. Included with the machine are a forming roller for 125g balls, 10g balls (mozzarella minis), and a cylinder for stick mozzarella. Unfortunately, we lack the raw material for production. Dksdpsy Skq Defx Aa Het

Condition: reconditioned (used), functionality: fully functional, working width: 430 mm, overall weight: 33 kg, warranty duration: 12 months, HAKO CLEANSERV SD 43/180 SINGLE DISC SCRUBBER The 430mm cleaning head is equipped with a new medium-hard brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The powerful centrally located motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Working width (mm): 430 Rotation speed (rpm/min): 180 Power consumption (W): 1200 Weight (kg): 33 Cable length (m): 12 Dodpjztnh Tjfx Aa Hekt INCLUDED: NEW 430mm PPL 0.5 disc brush 5 liters of TENZI NORMAL fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Graf Wet Blasting System Machine type: Wet blasting system Manufacturer: Graf Technik GmbH Type: Compact 2 Plus Year of manufacture: 2013 Control system: Siemens Origin: Germany Location: Albstadt Dksdpfx Aasztyzls Hot Delivery time: upon agreement

Condition: good (used), Year of construction: 2019, operating hours: 8,850 h, Jungheinrich TFG430 500DZ triplo500, with free lift / side shift / fork adjuster / 2019 / 8850 hours / LPG. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call in advance; we are not always on site. Dkjdpfx Aszzcvusa Het Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2022, operating hours: 5 h, functionality: fully functional, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, total height: 1,025 mm, total width: 520 mm, total length: 1,135 mm, water tank capacity: 25 l, empty load weight: 40 kg, The Kärcher BD 43 / 25 C is a 2022 model and has only been used for 5 operating hours. It has been completely overhauled and refurbished in our in-house workshop. During this process, each component was checked for functionality and cleaned. Two new, maintenance-free batteries have been installed. A bracket allows the suction head to be easily transported on the machine. The Kärcher BD 43 / 25 C is perfectly suited for small to medium-sized areas such as shops, workshops, or schools, etc. In short: - Yellow, highly visible, and robust controls - Easy operation thanks to the EASY-Operation panel = very short learning curve - Small, compact unit = maneuverable and easy to handle even in tight spaces - Convenient home-base system - Simple handling of cleaning and maintenance tasks - Separate charger Technical data: Working width, brushes: 430 mm Tank volume, fresh/dirty water: 25 liters Theoretical area performance: 1720 m²/h Practical area performance: 860 m²/h Maximum battery runtime: approx. 2 hours Permissible total weight: 115 kg Dkjdpfxoztpfao Aa Hot

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 Dkjdpfjwahhvsx Aa Hst The HDG Compact 15–50 kW is a versatile biomass boiler, ideal for residential buildings, small commercial premises or agricultural applications. It is suitable for operation with wood chips and pellets, offering modular output and fully automatic operation within a space-saving design. — Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, feeding and cleaning 🔧 Compact construction – perfect for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility. TOP HEATING SYSTEMS – Used heating units, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of about 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Augers • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers and many more components – from private to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: You can find most of our current offers on our website: topheatingsystems.com We also have further units available that are not yet listed online. 📅 Viewing: Viewings can be arranged by appointment at our warehouse. If you are interested, please feel free to contact us – we look forward to helping you find the right solution.

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10031325, This is a high-resolution NIR system capable of detecting particles in the 3 mm size range. Additionally, the machine is equipped with an electromagnetic detector that has a sensitivity of approximately 1.5 to 1 mm, depending on the metal type. Dedpfx Aozl Uzwoa Hjkt Depending on the settings, it can sort positively or negatively. Technical data: Belt width: 1024 mm Nozzle bar: 6.4 mm working width Upon request, complete documentation can be provided. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, Year of construction: 2020, Format: 0x0 Equipment: Hugo Beck Flexo X Intermittent Film Packaging Machine Dkodpfszpgh Dex Aa Het Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Film Processing:PE, PO, bio-films, center-folded film, and flat film Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204