Used Engel Er-Usp 5 Ep4 Picker for sale (76,642)

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine Bsdpfjwm Iy Eox Am Rown This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Bwedpfjwm Iz Nsx Am Ron Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a specialist dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for more than 25 years. Vertical rotary table injection moulding machine – complete service history (annual documentation) Manufacturer: Engel Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Bwsdpjy Ir Nysfx Am Ren Control unit: CC 200 Language: German/English Fully functional Very well maintained condition Machine comes from the original German owner xxxxx without illustrated peripheral equipment xxxxx Extras: - Light curtain / light barrier - Freely programmable inputs and outputs - 9 freely programmable inputs, programmable by station - 9 freely programmable outputs - Handling interface Euromap 67 - Charge amplifier for cavity pressure-dependent post-pressure switching, including corresponding graphic pages - 3 volt-free monitoring inputs for monitoring peripheral equipment, such as temperature controllers - Euromap 63 interface for connecting to machine data acquisition system - Hot runner and shut-off nozzle control - Complete maintenance booklet - Language: German / English Injection unit: - Screw diameter: 30 mm - Shot weight: 89 g PS - Injection pressure: 1,451 bar / boosted 2,205 - Injection volume: 99 cm³ Clamping unit: - Clamping force: 70 tons / 700 kN - Rotary table diameter: 1,200 mm - Opening stroke: 305 mm - Ejector stroke / force: 105 mm / 20.1 kN - Fully electric clamping unit Warranty: - Warranty until initial commissioning Loading/Shipping: - Free loaded onto buyer's truck, or free delivery (FOB) against reimbursement of shipping costs - Available ex-stock Hannover, Germany

Condition: excellent (used), Year of construction: 2016, clamping force: 6,500 kN, Equipment: documentation/manual, Clamping force: 600 t Screw diameter: 60 mm Distance between tie bars V: 910 mm Bwedpfx Amjzbdcwo Ren Distance between tie bars H: 1030 mm Shot volume: 705 cm3 Type: Horizontal Drive: Hydraulic Core pullers 2+2 Robot Viper 40

Condition: excellent (used), Year of construction: 2016, clamping force: 6,500 kN, Equipment: documentation/manual, Clamping force: 700 t Screw diameter: 60 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 705 cm3 Type: Horizontal Drive: Hydraulic Bwedpfszbdb Hox Am Ren Hydraulic cores 2 + 2 \+ 6 AXIS robot arm (KUKA)

Condition: new, Year of construction: 2025, clamping force: 6,500 kN, Equipment: documentation/manual, Clamping force: 650 t Screw diameter: 80 mm Distance between tie bars V: 1440 mm Distance between tie bars H: 1510 mm Bjdpfoza Au Nex Am Rewn Opening min max: 450-950 Shot volume: 1810 cm3 Type: Horizontal Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm Bodjx Nr Ryepfx Am Rswn • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment • Robot equipped: Yes • Robot interface: Euromap 67

Condition: excellent (used), Year of construction: 2019, Clamping force: 650 t Bwjdpfx Aszaqygsm Rjn Screw diameter: 60 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 890 cm3 Type: Horizontal Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2002, clamping force: 500 kN, screw diameter: 40 mm, total width: 1,480 mm, total height: 2,048 mm, overall weight: 7,400 kg, product length (max.): 4,860 mm, Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details. • Screw Diameter: 40 mm (Selected option) • Screw Length (L/D): 20 • Plasticizing Capacity (Standard): 32 g/sec • Plasticizing Capacity (Barrier): 44 g/sec • Dosing Stroke: 200 mm • Screw Speed: 20-400 r/min • Injection Rate: 198 cm³/sec • Max. Stroke Volume: 251 cm³ • Spec. Injection Pressure: 1300 bar • Spec. Injection Pressure (Increased): 2050 bar • Nozzle Stroke: 300 mm • Nozzle Contact Force: 50 kN • Heating Power: 9.2 kW • Number of Heating Zones: 4 (including nozzle) • Clamping Force: 500 kN • Opening Stroke: 500 mm • Ejector Force: 40 kN • Ejector Stroke: 130 mm • Mold Height Min.: 300 mm Bwodpfx Ajy Hhwdom Rjn • Max. Platen Distance: 800 mm • Mold Mounting Platens Size: 740 x 470 mm • Enlarged Mounting Platens: 740 x 680 mm • Ejection Width: 500 mm • Dry Cycle (Euromap 6): 1.6 sec - 200 mm • Pump Drive Power: 18.5 kW • Oil Capacity: 300 l • Net Weight (without oil): 7400 kg • Dimensions (LxWxH): 4.86 x 1.48 x 2.048 m • Control interface: Integrated keypad and screen (Engel branding) • Power switch: Manual rotary main switch (labeled "Do not actuate under load")

Condition: good (used), Year of construction: 2013, Ref. no.: 18494 Manufacturer: ENGEL Type: Victory 50-200 Spex Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Bwjdpfoxzq Skox Am Ron Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs Further information: ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production. Key Advantages: Tie-barless design → maximum mould accessibility SPEX special configuration → optimized for specific applications High precision & repeatability Energy-efficient operation Compact design → space-saving Automation-ready (robot interface possible) Applications: Automotive industry Electronics Medical parts Technical plastic components 👉 Machine in good working condition. Inspection possible upon request.

Condition: good (used), Year of construction: 2007, Clamping force: 1000 t Screw diameter: 105 mm Distance between tie bars V: 1150 mm Bedpfx Amey Ukfme Rown Distance between tie bars H: 1400 mm Shot volume: 4160 cm3 Type: Horizontal Drive: Hydraulic KUKA ROBOT 6 axes

Condition: ready for operation (used), Year of construction: 2019, clamping force: 6,500 kN, screw diameter: 60 mm, overall weight: 6,500 kg, controller manufacturer: ENGEL, This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Additional equipment • Oil Reservoir Capacity - Injection Unit: 500 l • Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool • Water Consumption (32°C): 4.80 m3/h Machine Benefits Qualitative Machine Benefits • The machine has electric water batteries (4 e-flomos with 8 circuits each). • The injection units are fitted with accumulators which enable a high injection pressure of up to 2400 bar with a 60 mm screw. Technical Machine Benefits • Maximum injection capacity: 890 cm³ • Screw torque: 2000 nm // maximum screw speed @ reduced torque: 275 min-1 • Reduced torque @ maximum screw speed: 1600 nm • Recovery rate (3-zone screw): 51 g/s // recovery rate (barrier screw): 67. 1 g/s • Injection rate: 353 cm³/s Bedpfx Amsy D Npce Rjwn • Nozzle stroke: 950 mm • Ld ratio: 24. 0 • Heating zones incl. Nozzle: 8 // heating wattage: 27. 5 kwel • Opening force with pressure pad: 510 kn • Maximum distance between platens: 1750 mm Extra Information Dimensions & Weight • Drop Out Chute Width: 1100 mm • Weight of Clamping Unit: 20,000 kg • Maximum Mold Weight (Moving Platen): 7,330 kg • Maximum Mold Weight (Stationary Platen): 7,330 kg • Maximum Mold Weight (Total): 11,000 kgCycle Data (Euromap 6) • Stroke: 700 mm • Dry Cycle Time: 2.9 s Control System: Monocompute CC300 Main Features • 21.5” full HD touchscreen • USB interface / Ethernet connection • E-move control element • 3 keycards for user login • Graphic symbols for cycle control • Screen languages: German, English • Acoustic error signal / Signal light for error displayPrograms & Monitoring • Power Control: optimizes motor performance during dispensing • Mould parallelism measurement • IQ Weight Monitor: monitors shot weight & viscosity • IQ Weight Control: automatic injection parameter adjustment during fluctuations • Quality monitoring interface (injection time, dosing time, pressure, cycle time) • Continuous ejection possible when monitoring is deactivated Clamping Unit & Plates • Reinforced clamping plates (FAP & BAP +50 mm each) • Reduced min./max. tool height and panel distance (–100 mm due to reinforcement) • FAP: smallest possible platen opening, spherical calotte minimized • BAP: without ejector opening • Additional threads according to EUROMAP VOL1 • Centering grooves according to drawing • Plate ejector – Variant A (adapted to clamping pattern) • Safety interface for ejector Hydraulics & Core Pulls • Hydraulic core pull: • 1-fold on moving platen • 2-fold on fixed platen • 2-fold on moving platen with PQ proportional valve, volume measurement, pressure/speed adjustment • Interface for intermediate core pull position Mold Heating & Cooling • Mold heating: 16 circuits, max. 40 kW heat output (Euromap 14) • Temperature monitoring interface (moving & fixed platen) • 4-fold hydraulic mold nozzle control • Separate cooling water connection (tool & machine) • Temperature control unit interface: Engel protocol, 20 mA current loop • 4-way flow regulator (0–10 l/min) • Hose specification: max. 90 °C / 4 bar • Hoses for mold cooling

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 2740 cm3 Bsdey Uffhspfx Am Rswn Type: Horizontal Drive: Hydraulic VIPER 40 Linear robot available The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: excellent (used), Year of construction: 2016, clamping force: 4,500 kN, Clamping force: 450 t Screw diameter: 55 mm / 35 mm Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Shot volume: 295 cm3 Bwjdpfey Ufd Rjx Am Ron Type: Multicomponent Drive: Hydraulic \+ robot Wittmann \+ rotary table

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 742 mm, total length: 1,027 mm, total width: 852 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - special tray + 1 year warranty + incl. aquamatic system + incl. end conductor & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,027 mm Width: 852 mm Height: 742 mm Bedpfjy Rnrvex Am Rjwn Weight: approx. 1,580 kg Suitable for the following models and others: Daewoo B30 X-5 Common battery sizes available, inquiries welcome. Transport available.

Condition: ready for operation (used), Year of construction: 2004, PET preform injection molding machine clamping force 320t injection weight 6935gr. screw 130mm preform removal system SERVO IV, TPS robot TRT-M4-72-E, 72-fold, 4-stage, incl. removal set, conveyor belt LT/h 1825 Output approx. 17,000 preforms/hour Option1: MHT mold 72-cavity for 30.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5 liter bottles) Bwjdpfx Amjnxkxwo Ren Option2: 72 core sets for 27.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0 liter bottles) Line comes from our own preform production and was in production until our new line was replaced.

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, number of seats: 55, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Year of construction: 2026, Equipment: ABS, air conditioning, parking heater, STANDARD FEATURES ? Reclining backrest ? With handle in the central aisle OPTIONAL FEATURES ? 3-point seat belt for each seat ? Adjustable center armrest with upholstery ? Fabric upholstery SEATS ? Adjustable Lineo passenger seats ? Seat color: Laura 23245105 3017/PM5006065058 ? Headrest: Valencia 107-4001 ? Mushroom base: PN5006062772 DOORS ? Door opener on the left of the dashboard ? Door 2, external opening 800 mm, single-leaf ? 4 red “Emergency” buttons BODY ? Water-repellent plywood floor edge cut-outs Paintwork & Decoration ? Enhanced corrosion protection for underbody Paint color ? RAL 9010 Exterior equipment ? Mud flaps on all axles Flooring ? Sealed joints of flooring under body molding Handrails/Partitions ? Partition wall coated with cement fiberboard ? Divider pipes (epoxy coating) RAL 7004 Window blinds ? Prepared for blinds on side windows Luggage racks ? Interior parcel shelf Flooring ? FL021 Gayawood 4521 Yellowstone Radio Bodpfxsxxw Tpe Am Rown ? Dual-zone radio AM/FM/DAB+, USB and SD card slot DIN Microphone ? 1 microphone for the driver and 1 for the hostess OPTIONAL ? 13-pin trailer socket HEADLIGHTS ? Fog lights ? Xenon warning lights with door opening assistant STOP REQUEST ? STOP REQUEST WITH LIGHT AND BELL CONNECTION WINDOWS ? All doors single glazed ? Rear window single glazed ? Windscreen with standard defroster ? All windows non-opening ? Double glazing ? Emergency shut-off switch with chain ? Driver’s window double glazed VENTILATION ? 2 manual roof hatches HEATING ? Reinforced convectors for passenger compartment ? DEL EXTRA WATER TANK FOR HEATING ? SPHEROS HEATER WITH PRE-HEATED NOZZLE AND REINFORCED WATER PUMP AIR CONDITIONING ? Air conditioning + auxiliary heating 32 kW DRIVER’S CAB ? Reversing camera ? ADDITIONAL SUN VISOR FOR LEFT EXTERIOR MIRROR DRIVER’S SEAT ? STANDARD DRIVER'S SEAT WITH INTEGRATED HEADREST – TOP SPEC ? Armrests left and right on driver’s seat DRIVER’S AREA ? Electric front curtain and manual side curtain ? Clothes hooks for driver and co-driver ? Air conditioning for the driver LUGGAGE COMPARTMENT ? Luggage compartment with door ? Heated driver’s seat DRIVER’S COCKPIT ? Digital tachograph Dtco 4.1 Smart HOSTESS ? Tiltable hostess seat ENGINE ? 2500 RPM ? Engine power 320 HP / 235 kW ? Speed limiter 100 km/h ? Diesel filter heating for Webasto ? FUEL TYPE: Diesel + HVO AUTOMATIC TRANSMISSION ? AUTOMATIC TRANSMISSION ZF 6AP1220B ? KEY PAD FOR AUTOMATIC TRANSMISSION LEFT OF DRIVER OUTSIDE THE DRIVER’S POSITION – 6 BUTTONS REAR AXLE ? REAR AXLE RATIO 5.63 SUSPENSION ? Shock absorbers ? Air suspension ? Lowering function BRAKING SYSTEM ? INTERCITY BRAKE PADS TYPE ? FAE ITALY FUEL TANK ? FUEL CAP & KEY ? Fuel tank capacity 430 l (310 l + 120 l) WHEELS AND TIRES ? Standard on-board tool kit ? Spare wheel carrier with spare wheel WHEEL NUT COVERS / RIM COVERS ? Wheel nut covers front TIRES ? TIRES 295/80R22.5 – FAST ON ROAD/SNOW 152/148 ? X MULTIWAY 3D XZE + XDW ICE GRIP

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from cleanroom production (pharmaceutical sector) Bjdpfx Amoub Umqo Rjwn - Equipped with 820 mm rotary table - Including GEKU Robot SR 500 ST (x=600, y=1400, z=2500 mm) - Only 33,107 operating hours - Safety enclosure / protective cage - Horizontal conveyor belt - Hardly any paint damage / almost as new in appearance - Fully operational The machine can be inspected under power by prior arrangement. Technical Specifications Manufacturer: Engel Model: V 330H/80V/130 Combi 2-Color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Weight: 10,600 kg Functionality: fully operational Condition: excellent Special features Control system: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 cm³ Clamping force: 1300 kN / 130 tons Tie bar spacing: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor power: to be provided Heating capacity: to be provided Total power: to be provided The machine is immediately available from our warehouse in Hannover, Germany, and has been tested. Extras 2-component / 2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety enclosure / protective cage CC 200 control, German and English languages GEKU Robot Details SR 500 ST Control: Simotion X axis: 600 mm Y axis: 1400 mm (vertical) Z axis: 2500 mm (horizontal) A flip axis: SWM 45 C axis: Servo Gripper: SWS16 B axis: not available Warranty Warranty up to initial commissioning Loading/Shipping Free loading onto buyer's truck or free delivery against freight reimbursement from our warehouse in Hannover, Germany Financing – on request – leasing option Price on request

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines Bwsdpfx Amoyc Ewxj Ren From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: ready for operation (used), Year of construction: 2003, clamping force: 8,000 kN, screw diameter: 90 mm, total width: 3,000 mm, total height: 2,500 mm, overall weight: 44,000 kg, product length (max.): 8,900 mm, Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details. • Shot volume: ~2700 cm³ • Max. injection pressure: ~1900 bar • Plasticizing capacity: ~77 g/s • Clamping unit: Two-platen design (no traditional toggle), larger mold space for easier changes, even clamping force distribution • Injection unit: Hydraulic, high-performance plasticizing; suitable for thick-walled or large-volume parts • Typical applications: Automotive components (e.g., bumpers, dashboard elements), large housings and covers, industrial parts, thick-walled technical components • Advantages: High clamping force for large parts, more compact than traditional tie-bar machines, stable industrial design, easy to automate Additional equipment Bjdey Alwmepfx Am Rown • Not specified/included in the provided information

Condition: used, Year of construction: 2002, operating hours: 49,000 h, functionality: fully functional, clamping force: 250 kN, overall weight: 3,300 kg, First owner Bwedpjzal Thefx Am Ren

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Bwjdoy Ui Nqopfx Am Rsn Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Year of construction: 2005, Arburg 320A 500-170 with the sprue picker / electric machine Year of manufacture: 2005 Bjdpsy Smn Eefx Am Rown Injection unit: Screw diameter: 35 mm injection weight: 105 g Injection pressure: 1470 bar Metering volume: 115 ccm Clamping unit : clamping force: 50 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: electric clamping unit: toggle lever Control system: SELOGICA Additional equipment: Electric machine: high speed, energy saving and very quiet. Euromap 67 Robot interface injection unit hardened - bimetal Central lubrication Machine with the built-in conveyor belt Arburg and original sorting flap Dimensions: Weight: 3500 kg Length/width/height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating power: 5,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Engel Victory 500/80 Tech / Production Line with Engel Viper 12 Robot Year of manufacture: 2011 Injection Unit: Screw diameter: 45 mm Shot weight: approx. 295 g Injection pressure: 1,598 bar Dosage volume: 318 cc Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - touchscreen Bwsdpfx Amjy Sml Ro Ren Additional equipment: Tie-bar-less machine Euromap 67 Robot interface 3x hydraulic core pull Injection unit hardened - bimetallic Robot Engel Viper 12 Year of manufacture: 2014 5-axis robot: 4 axes driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Robot available for purchase at additional cost Dimensions: Weight: 5,300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pump/motor: 15 kW All offered machines are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Engel Victory 1350/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of Manufacture: 2011 Injection Unit: Screw diameter: 55 mm Shot weight: approx. 590 g Injection pressure: 2183 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 260 t Tie-bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional Equipment: Production line with Engel Viper 20 Robot Machine in very good technical condition Tie-barless hybrid machine: energy-saving and very quiet 8x air valve on the fixed platen side 2x hydraulic core pull on the fixed platen side 2x hydraulic core pull on the moving platen side 18 hot runner control zones Injection unit is wear-resistant and corrosion-proof Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Engel Viper 20 Robot Year of Manufacture: 2011 6-axis robot: 4 axes (X, Y, Z, B - rotation) driven electrically by servo motors; axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and Engel brand safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 19,400 kg Bodpfsy Sl Iqex Am Rswn Length/Width/Height: 7.06x2.03x2.30 m All offered machines are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can attend live technical tests at our facility in Łódź. Price: On request