Used Demag Ergotech 200-610H/120V for sale (15,979)

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7826-1082, Plastic Injection Moulding Machine | DEMAG Ergotech Extra 35-80 (350 - 80) Clamping force [kN]: 350 Number of components: 1 Clamping plate width [mm]: 390 Gedpfxjygh Rve Aaxjbl Clamping plate height [mm]: 390 Clear tie bar spacing horizontal [mm]: 280 Clear tie bar spacing vertical [mm]: 280 Centric ring diameter [mm]: 110 Min. mould installation height [mm]: 180 Max. mould installation height [mm]: 350 Max. opening stroke [mm]: 350 Max. ejector stroke [mm]: 100 Thread [M]: 16 Max. mould weight [kg]: 310 Max. mould weight moving platen [kg]: 150 Screw diameter [mm]: EE1:18 Max. shot weight [g] PS: EE1:20 Injection unit orientation: EE1: horizontal Equipment: 2-core pull, without robot Inspection possible any time by appointment. Free loaded on truck (Butzbach). #Tags: DEMAG | Extra35 | Extra3580

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Gedpfx Aasxtmp Nsxjbl

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 878 0730, clamping force: 2,500 kN, clearance between the columns: 630 mm, mold height (min.): 330 mm, ejector force: 69,000 N, ejector stroke: 200 mm, opening stroke: 675 mm, plate length: 950 mm, plate width: 950 mm, total length: 6,500 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 13,100 kg, heating capacity: 27 kW (36.71 HP), pressure: 190 bar, pump power: 4,500 W, power: 72 kW (97.89 HP), type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, input current: 167 A, Equipment: documentation/manual, Technical Specifications – Demag Ergotech 250/630–1450 Clamping force: 2,500 kN Tie bar spacing: 630 × 630 mm Maximum opening stroke: 675 mm Minimum mold height: 330 mm Maximum mold height (with WA): 710 / 830 mm Platen size (H×V): 950 × 950 mm Maximum mold weight: 3,300 kg Maximum weight of moving mold half: 2,200 kg Ejector stroke: 200 mm Ejector force: 69 kN Injection unit Screw diameter: 50 / 60 / 70 mm Injection pressure (at 400 °C): 2,426 / 1,905 / 1,400 bar Injection volume: 530 / 763 / 1,040 cm³ Shot weight (PS): 480 / 690 / 940 g Heater output (screw cylinder): 14.8 / 23.1 / 27.0 kW Drive & Power Supply Pump unit: 37 / 45 kW Total installed power: 52 / 60 / 64 / 72 kW Supply voltage: 3×400 V Frequency: 50 Hz Maximum current consumption: 167 A Dimensions & Weight Overall length: 6,500 mm Overall width: 1,900 mm Overall height: 2,300 mm Gbjdpfsw Hq Hhex Aaxjl Machine weight (net): 13,100 kg

Condition: good (used), Year of construction: 1999, Demag Ergotech systems 500/200 Closing 50 TO Year 1999 Scrow 30 mm Gbsdpfx Aaeg Emvtsxel Spraying weight approx 90 distance between tie bars 35,5x35,5

Condition: excellent (used), Year of construction: 1997, Demag Ergotech 150-440/610 Closing 150 TO NC 4 Scrow 40 mm BJ 1997 Tie bars distance 50x50 Gjdpfed N Ux Dox Aaxjbl Lifting volumes 255 cm Spray-softened 230 g

Condition: ready for operation (used), Year of construction: 2001, clamping force: 3,000 kN, overall weight: 13,900 kg, This 5-axis DEMAG ERGOTECH CONCEPT 3000-1450 was manufactured in 2001. It features a clamping force of 3000 kN and a machine weight of 13.9 tonnes. With a maximum hydraulic pressure of 190 bar and a flow rate of 164 l/min, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH CONCEPT 3000-1450 hydraulic injection moulding machine we have for sale. Contact us for further details. Gbodpfx Asy Icikjaxel • Max. Hydraulic Pressure: 190 bar • Max. Flow Rate: 164 l/min • Total Amperage: 181 A • Heating Amperage: 102 A • Drive Amperage: 79 A • Control Amperage: 67 A • Operation Voltage: 400 V • Frequency: 50 Hz • Certification: CE

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,500 kN, screw diameter: 45 mm, injection weight: 320 g, This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 358 cm³ • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450 °C • Max pressure: 190 bar • Max flow (Qmax): 114 l/min • Power supply: 3x400 V • Frequency: 50 Hz • Total connected load: 78.3 A • Motor load: 41.0 A • Heating load: 37.3 A • Pump load: 41.0 A • Machine weight: 7.7 t • Year of production: 1999 • Availability: Mid 2026 Additional equipment • Handling system: Wittmann linear robot • Wittmann W621 (1999) • X-stroke: 550 mm • Y-stroke: 1200 mm • Z-stroke: 2000 mm • Weight: 300 kg • Wittmann W633 • Robot No: W633 • X-stroke: 500 mm • Y-stroke: 1400 mm • Z-stroke: 2000 mm • Weight: 475 kg • Wittmann W743 • Robot No: W743 • X-stroke: 1200 mm Gsdpfxsyyyn Uj Aaxobl • Y-stroke: 2000 mm • Z-stroke: 4000 mm • Weight: 835 kg • Connected load: 18 A / 12.5 kVA • Voltage: 400 V

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Gjdpfx Aasyxrt Toxjbl

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-200 / All-Electric Injection Moulding Machine Year of manufacture: 2009 Gbodpfx Aajy Dp E Rexsl Injection Unit: Screw diameter: 25 mm Shot weight: 39 g Injection pressure: 1580 bar Dosage volume: 44 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 370x370 mm Platen size: 520x570 mm Ejector: electric Clamping system: toggle lever Control system: NC5 - touchscreen Additional equipment: All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface 4x air valve Hot runner control Hardened injection unit – bimetallic Central lubrication Screw diameter can be changed Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2003, operating hours: 96,986 h, clamping force: 600 kN, screw diameter: 30 mm, This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mold installation height: 210 mm • Opening stroke: 400 mm • Max. mold weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on the ejector side/AS) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Stroke volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D: 20 • Nozzle radius: 15 mm • Armored/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 metric tons Additional equipment • Robot/removal device: W621-1381 • Travel paths: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: 7-zone integrated control Godpfx Asyg Nfujaxjbl • Mold sensors: Kistler (p=1/t=0)

Condition: used, Year of construction: 2005, Demag extra 50-200 Clamping force: 50 ton Distance between tie bats: 355 x 350 mm Screw diameter: 22 mm Shot volume: 47 cm3 Shot weight: 42 g Pneumatic vent: 1x Gjdpjyypm Tofx Aaxebl Hydraulic vent: 1x

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Gedpeygikwofx Aaxjbl Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Gjdex Uqb Ispfx Aaxebl Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm injection shot weight in Polysterol: 149 g/PS Gjdjwvkggspfx Aaxjbl closing pressure: 100 kN

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN Gsdpfx Aowvkgmeaxebl

Condition: ready for operation (used), Clamping force: 350kN, tie bar distance: 280mm/280mm, platen dimensions X/Y: 410mm/410mm, min. mold installation height: 180mm, max. opening stroke: 350mm, max. platen distance: 530mm, screw diameter: 22mm, shot volume: 47.5cm³, shot weight (PS): 41g, injection pressure: 2440bar, control: NC4, heating power: 6.3kW. Machine dimensions X/Y/Z: approx. 3100mm/1100mm/1600mm, weight: approx. 1800kg. On-site inspection is possible. Gjdpfxswaa H Do Aaxsbl

Condition: good (used), Year of construction: 1998, Ref. no.: 17507 Hersteller: DEMAG Type: ERGOtech system 800-310 Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg Gsdpfx Ajwm Iyfoaxjbl

Condition: good (used), Year of construction: 1997, Ref. no.: 18142 Hersteller: DEMAG Type: Ergotech pro 50-270 Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg Gbsdpswm Iz Aofx Aaxel

Condition: used, Chassis with friction wheel drive for DEMAG lightweight crane system, suitable for crane rails made from system profiles type KBK 2 and KBK II L. Type: DRF 200-B14-1-43, serial no.: 45950995. Travel speed: approx. 40 m/min = 0.67 m/sec. Motor power: 0.37 kW. Power supply: 400 Volt, 50 Hz. Drive motor: DEMAG, type ZBA 71 A2 B007. Gsdpfew Nxyyex Aaxebl KBK 2 / KBK2L trolley for suspension in crane track. Wheel diameter: 82 mm, wheel width: 21 mm, trolley width: 78 mm. Space requirement (L x W x H): 410 x 320 x 470 mm. Weight: 28 kg. In good condition.

Condition: used, E-Chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DI Gedpfxsgd Ipnj Aaxsbl with Dematik BUS-control via crane system controller make no.61456646 year of construction 2003 lifting capacity: 200 kg hook path: 4,0 meter Main hoisting speed: 14,0 / 19,2 m/min. Fine lifting speed: 0,20 m/min. chain size 4,2 x 12,2 mm 1 load strand = 200 kg - with control logic DKES2/5 500V - without crane control - Dematik BUS control via crane system control - without roller trolley Mains connection: 400 Volt, 50 Hz rated power: 750 W rated current: 2,4 A good condition

Condition: excellent (used), Year of construction: 2001, operating hours: 70,180 h, clamping force: 800 kN, screw diameter: 40 mm, injection pressure: 1,830 bar, injection weight: 205 g, Demag Ergotech Viva 800-400 (144) Description without hopper General information Product Code: 144 Availability: In Stock Year of production: 2001 Brand: Demag Technical data Shot Weight: 205 g Clamping Force: 800 kN Screw dia: 40 mm Injection pressure: 1830 bar Tie bar distance: 400 x 400 mm Platen size: 590 x 580 mm Mould height min.: 250 mm Type of controls: NC4 Language: German Godpsvvtx Tefx Aaxsbl Power: 26,1 kW Workinghours: 70180 h Weight: 3600 kg Dimensions: 4,35 x 1,7 m Hopper: No Core pull: Yes

Condition: good (used), Year of construction: 1998, operating hours: 83,000 h, screw diameter: 50 mm, overall weight: 7,400 kg, Demag 150 tons Auger diameter: 50 mm Impact volume: 399 cc Gedjt Dx Hbjpfx Aaxsbl Shot weight: 360 g Opening path max: 500 mm Mold height min: 250 mm Mold height max: 560 mm (660 with WA) Max. distance between moldboards: 1060 mm (1160 with WA) Mold table size H*V: 750*750 mm Distance between tie bars H*V: 500*500 mm Max. tool weight: 1700 kg

Condition: used, Year of construction: 1998, Clamping force: 60 t Screw diameter: 30 mm Shot weight: 96 g Distance between tie bars V: 520 mm Gsdevurhqspfx Aaxobl Distance between tie bars H: 520 mm Shot volume: 106 cm3 1 x core puller Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 Machine type: Two-component injection moulding machine (2K) Control system: NC4 Control Drive type: Hydraulic Technical data – Clamping unit Clamping force: 800 kN Tie bar spacing: 420 × 420 mm Mounting plate dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum distance between plates: 750 mm Injection unit – two-component First system (horizontal): Nitrided screw Godpfx Ajww H Nyeaxjbl Screw diameter: 18 mm Second system (vertical): Bimetallic screw Screw diameter: 25 mm General data Motor power: 18.5 kW Heater power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4100 kg Equipment and additional information Control language: German Complete machine history available

Condition: excellent (used), Year of construction: 2005, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 TWO MACHINES AVAILABLE Machine type: Two-component (2K) injection moulding machine Control system: NC4 Control Drive type: Hydraulic Technical Data – Clamping Unit Clamping force: 800 kN Tie-bar spacing: 420 × 420 mm Mounting platen dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum daylight between platens: 750 mm Injection Unit – Two-component First system (horizontal): Nitrided screw Screw diameter: 22 mm Second system (vertical): Bimetallic screw Screw diameter: 25 mm General Data Motor power: 18.5 kW Heater power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4100 kg Equipment and Additional Information Control language: German Complete machine history – available Godpfx Aaeww H S Isxjbl