Used Dell Powerconnect 2808 for sale (303)

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Ksdpoxy Tmnofx Ablslt

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Kljdpfevvi Nzex Ablot

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Klodsvvi N Ispfx Ablet

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Kedpfx Absvvi Rfelolt

Condition: used, machine/vehicle number: 008481, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Kljdjy Edpmjpfx Ablst Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 005449, undefinedPosition 2: CNC for Flexible Drilling MORBIDELLI-FLEXA 912+FLEXA 902 Position 3: Automatic Dowelling Machine MORBIDELLI-FLEXA 912+FLEXA 902 Klsdpfx Aswucl Eeblot

Condition: used, machine/vehicle number: 005446, X axis working area: 3000 mm Y axis working area: 1300 mm Kledpswuciqefx Abljt Number of controlled axes: 3 axes Total number of drilling spindles: 112

Condition: used, machine/vehicle number: 008340, X axis working area: 4400 mm Klodpfxey Nkpnj Abljt Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 36 Total number of tool changer positions: 30

Condition: used, machine/vehicle number: 005448, Max. panel width: 3000 mm Ksdpfx Abowcydzelelt Max. panel length: 1350 mm No of injectors: 24

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 45 m/min, Equipment: CE marking, The machine has the following configuration: Drilling units: Upper unit with 30 vertical and 6 horizontal spindles Milling unit 1: Upper unit, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling unit 2: Upper unit, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, mounted at the rear of the machine Tool magazine 2: 6 positions, mounted on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece pass-through height: 400 mm Kjdpfoyzy S Nox Ablelt X-axis traversal speed: 40 m/min Y-axis traversal speed: 45 m/min Z-axis traversal speed: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Vacuum pump individual capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Worktable with vacuum rail supports Number of vacuum rails: 8 Vacuum clamping for workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8340

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine xH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Kljdpfeu Ngrqex Ablst Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Parts shown by hand not come. Kjdpsyfgx Nefx Abljlt Technical details are shown on pictures.

Condition: used, machine/vehicle number: 008388, X axis working area: 3086 mm Y axis working area: 2185 mm Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Klodsyngzvepfx Ablst Total number of drilling spindles: 18 Total number of tool changer positions: 20

Condition: new, Year of construction: 2024, Morbidelli M200 CNC CONTROLLED MACHINING CENTER - C.E. Safety instructions - Morbidelli m200 3715x1620 Z250 - Volt 400 EU - Frequency 50 Hz - PRO-SPACE safety devices - Plate passage Y 2200 mm - Retractable safety belts - "TECPAD wired" remote control with 7" touchscreen monitor - Tool changer TRB14 (version Y=1620) - Tool changer FAST14 - 1 vacuum pump, output 250/300 m³/h at 50/60 Hz - Central optimized suction nozzle on rear drilling head - Drilling unit with pneumatic vertical positioning (single Z-axis) - RO.AX F31LTC drilling unit - Suction hood for drilling unit - Drilling unit with inverter - Pressure booster - 5-axis unit "Prisma 5" version "KT" - Suction hood for 5-axis electrospindle - 7-position extraction hood for 5-axis electrospindle - Device for liquid cooling (air type) - 6 "TV FLEXMATIC" work tables 1600 - Conveyor belt for chip and remnant removal for X=3710mm - Removable chip collection container at the end of the machine frame - Sensor for reading the tool length - 4 devices for loading aid H=75 1600 - Front stops H=75 for 6 supports - 12 x fixed suction cups 145x145 H=75 mm - 6 x rotary suction cups 145x55 H=75 mm - Preparation for clamping cylinder for 6 supports TV FLEX / TV FLEXDRIVE / TV FLEXMATIC - Maestro connect: service contract for 1 year (kit gateway "plug&play" included) - SCM DIGITAL SOLUTIONS: MAESTRO CONNECT - Human-machine interface software (HMI) MAESTRO ACTIVE - Machine user interface software Maestro lab Klsdpfx Absu Illmjljt - Hardware key for Maestro - Additional hardware key for Maestro (for USB slot) - Mobile operating console "eye-M TOP" - TELESOLVE remote maintenance via the Internet - Mobile control unit with 6.5 m cable length - S-N-D 3-position selector switch - MACHINE LANGUAGE: German - incl. delivery, 3 days training in advance, 1 week installation and training - New machine is still in original packaging

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AL 00 - 647, functionality: fully functional, 5-axis CNC machining center Software: SCM Xilog Plus Operator software: SCM Panel-Mac X = 3470 mm Y = 1240 mm Ksdpfxeyyb N To Abljlt Z = 180 mm 6 cross beams 6 loading aids Rear & middle stop rows Vacuum pump 90 m³/h Vacuum cup positioning with crosshair laser Disc tool changer with 12 tool positions 5-axis milling spindle 360° 11 kW 20,000 rpm Tool interface HSK 63-F Handheld control unit Drilling head X = 7 Y = 5 X horizontal 2 x 2 Y horizontal 1 x 2 Grooving saw with 5-axis milling spindle Safety device "Bumper" Central lubrication

Condition: used, DELLE VEDOVE roller conveyor 3.5 m long Kedpfx Aboxrtq Rjlolt

Condition: good (used), Year of construction: 2009, functionality: fully functional, The supporting structure is made from a thick, monolithic steel block with a reinforced core. The construction is triangular with a wide base and is designed to ensure the machine's stability under all processing conditions. Guideway lubrication is centralized, meaning all guideways on the machine are lubricated from a single point. The CNC features a full aluminum worktable with grooves for vacuum limitation or fixture mounting. This type of worktable is especially useful for “NESTING” operations. The electrical cabinet is built according to international standards, ensuring total reliability of the integrated components. Ksdpjy Nv Ucofx Abljlt Technical specifications: Working dimensions: With vertical milling: 3260 x 1250 mm With drilling head: 3330 x 1540 mm Maximum workpiece height: 180 mm X, Y, Z axis travel: 3420, 1690, 280 mm Tool storage positions: 12 Vacuum pump: 100 m3/h Power: 10.5 kW Rated voltage: 400 V Frequency: 50/60 Hz Machine weight: 3400 kg Software: Xilog3 (supports .dxf file import) Year of manufacture: 2009

Condition: ready for operation (used), Year of construction: 2010, WORK CENTER TO C.N. SCM Make: MORBIDELLI Model: UNIVERSAL 3612 Year: 2010 - Working range: 3.680 X 1.260 X 150 mm. - 1 Milling motor 8,5 Kw (11,5 HP) - 1 Automatic rotary gearbox with 12 positions - 1 Drilling comb with: 18 vertical + 8 horizontal + 1 "X" saw bits - Vacuum pump 250 m3/h Kledpfx Aboqpgglelot - DXF compatible software - BUMPER protection - CE STANDARDS - Weight 3.000 Kg.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working area X: 2950 mm Working area Y: 1250 mm Workpiece passage Z: 160 mm 5-axis electrospindle, HSK 63F interface Vertical drilling spindles: 12 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Tool changer with approx. 12 positions Vacuum clamping system for "TV" crossbeams Laser positioning system for crossbeams and suction cups Vacuum pump 100 m³/h Ksdpfx Asy Sgfwsblolt Pneumatically controlled lifting device CE safety system with bumper CNC control PC Office with integrated computer Programming system WOP Xilog Plus

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA2/004582, functionality: fully functional, operating hours: 14,500 h, travel distance X-axis: 3,120 mm, travel distance Y-axis: 1,320 mm, number of axes: 5, TECHNICAL DETAILS X-axis travel: 3,120 mm Y-axis travel: 1,320 mm Number of axes: 5 MACHINE DETAILS Operating hours: approx. 14,500 h EQUIPMENT Suction pads Mounted air-blow nozzle Kledsy Akr Aepfx Ablst Newly installed control unit Note: The machine has already been dismantled by the manufacturer.

Condition: good (used), Year of construction: 1998, functionality: fully functional, operating hours: 25,000 h, input voltage: 380 V, input current: 35 A, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 180 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 110 mm, workpiece weight (max.): 200 kg, number of axes: 3, number of slots in tool magazine: 4, controller manufacturer: num, total height: 27,000 mm, total length: 5,500 mm, total width: 2,700 mm, overall weight: 4,000 kg, table length: 3,000 mm, table width: 1,100 mm, year of last overhaul: 2024, Equipment: documentation/manual, Well-maintained CNC machining center with low operating hours. Klodsyurwpspfx Ablet Milling unit 6.6 kW ISO 30 with 4-position tool changer Milling unit 6.6 kW ISO 30 MANUAL TOOL CHANGE Drilling unit 10+4 drills Vacuum pump 100 m³ Automatic machine lubrication Table 3000x1100 mm Updated Xilog plus software Refurbished NUM 1040 controller

Condition: good (used), High-precision longitudinal panel saw for finished cuts. Equipped with a high-precision scorer. Upper belt drive. Kjdpfxsy E Iw Uj Ablolt

Condition: used, Year of construction: 1997, type of input current: three-phase, DELLA VEDOVE profile sander Klodpfx Aboytcv Holet

Condition: good (used), Year of construction: 2018, machine/vehicle number: AB00004121, functionality: fully functional, operating hours: 5,581 h, power: 8 kW (10.88 HP), input voltage: 400 V, input current: 65 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 1,900 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 95 mm, workpiece weight (max.): 50 kg, number of axes: 6, number of slots in tool magazine: 6, controller manufacturer: NUM, actuation type: pneumatic, total height: 2,450 mm, total length: 4,680 mm, total width: 2,225 mm, overall weight: 2,343 kg, table length: 1,350 mm, Equipment: CE marking, documentation/manual, We are offering this well-maintained Morbidelli CX200 vertical woodworking centre, year of manufacture 2018. Klodpfxjy E N E Hj Ablst Manufacturer: Morbidelli Model: CX200 Year of manufacture: 2018 Condition: good Category ID: 2502 Type ID: 4257 Machine type: Vertical woodworking centre If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, feed rate X-axis: 95 m/min, plate height: 60 mm, plate length: 900 mm, plate width: 3,000 mm, production capacity: 1,500 unit/h, TECHNICAL DETAILS Minimum panel width: 250 mm Maximum panel width: 3,000 mm Minimum panel length: 100 mm Maximum panel length: 900 mm Minimum panel thickness: 12 mm Maximum panel thickness: 60 mm Maximum panel weight: 50 kg Working height: 1,060 mm Panel conveyor speed with inverter: 20 - 95 m/min Speed for panels over 50 kg: 50 m/min Kodpfx Aeyzn Sdoblslt MACHINE DETAILS Control model: TPA - Albatros - CNC 2000 EQUIPMENT EASYTOOL software 5 split lower vertical drilling heads, automatically adjustable with NC control, each with 26 independent spindles 2 horizontal drilling heads with split heads, 28 + 28 spindles (per side), independently arranged on two levels External reference: MMA004.003