Used Ddr Betrieb Straightening Machine for sale (65,051)

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Guiding roller width: 30 mm Guiding roller diameter: 30 mm Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut Nledezczvdjpfx Ahfjf - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Space required L x W x H: 250 x 100 x 150 mm Weight: 5 kg Good condition

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Nedexyhhajpfx Ahfolf Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bottom Roll Ø: 80mm Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Number of guide rollers: 5 Sheet width: 430 mm Sheet thickness: 1 mm Top roller diameter: 2 top rollers - Ø 60 mm Njdegvl U Repfx Ahfjlf Bottom roller diameter: 3 bottom rollers - Ø 60 mm

Condition: good (used), Pre-stroke: ALBA Type Mvhy 50 sheet metal straightening: Georg SKB Nodpfxolz I Hbj Ahfjlf With complete documentation!

Condition: good (used), Feed: Manufacturer: ALBA Tip: AVS 400 Belt straightening: Manufacturer. George Njdpelz I R Refx Ahfslf Type: SBK 2 Double straightening and feed line!!! With complete documentation!!

Condition: used, Clamping plate, clamping table, machine table – HOME-MADE Can also be used as a straightening plate or welding plate. Table surface: 2150 x 1040 mm Overall height: 200 mm - Top and bottom surfaces are parallel and machined, surfaces are planed. - Table plate dimensions: L x W x H = 2150 x 1040 x 65 mm Nlsdotqgnyspfx Ahfof - Table plate has several symmetrical holes. Table plate with M16 and M24 threaded holes: M16, M24, M16, M24, etc. Hole spacing in the length: approx. 250 mm Hole spacing in the width: approx. 255 / 165 / 255 mm - 6 double T-beams welded onto the steel plate. Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm Distance between the double T-beams: 50 to 55 mm Weight: 1730 kg Good condition.

Condition: as good as new (ex-display), Year of construction: 2023, tool height: 200 mm, bending angle (max.): 180 °, pressing force: 42 t, sheet thickness (max.): 30 mm, sheet thickness copper (max.): 20 mm, lifting speed: 10 mm/s, bending force (max.): 42 t, Stierli bender 420 CNC Horizontal bending machine, with Siemens controler Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Nsdpfx Asgqflqshfolf Bending pressure 42 tons Tool height 200 mm Stroke 0-300 mm stepless Bending capacity 200x24 mm S235 Straightening power for HEA180 Bending and straightening program via selector switch Demonstration machine year 2023 incl. hand and foot pedal Horizontalbendingmachine as good as new Please contact us for more information for this horizontal bender.

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 300 mm, stroke length: 350 mm, bending angle (max.): 180 °, pressing force: 82 t, sheet thickness steel (max.): 30 mm, sheet thickness copper (max.): 30 mm, lifting speed: 10 mm/s, bending force (max.): 82 t, Stierli bender 820HE Horizontal bending and straightening machine, with manual control and stroke fine adjustment system STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 82 tons Tool height 300 mm Stroke 0-300 mm stepless Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Straightening power for HEA260 Nsdpsgqfmnsfx Ahfelf Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: excellent (used), Year of construction: 2017, operating hours: 15,200 h, functionality: fully functional, machine/vehicle number: P172ZH357, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (max.): 24,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Nsdpfx Aozhi R Sehfolf

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/8493, Offer Number: D08L/8493 Machinetype: straightening and cutting machine Make: STOLLBERG Type: UDARA10 Constr. year: 1980 Nlodpfezd U S Hex Ahfof diameter range: 3-10 mm cutting length: 1000 mm speed - meters/min: 22-71 Location: In our warehouse

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side Nsdpfx Aexw Rcuohfelf - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment Nledpfjif Sg Sex Ahfof - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. Njdpsvgbgasfx Ahfelf *

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Nedpfju Ic Avjx Ahfelf Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: used, Technical details: sheet width: 153 mm material thickness: 1,5 mm Number of Straightening rolls: 4x oben/upper/ariba Number of Straightening rolls: 5x unten/lower/abajo throughput speed: 180 m/min total power requirement: 7,5 kW Weight approx.: 0,543 t space requirements of the machine approx.: L:1,6xB:0,8xH:1,22 m Inside of the machine is a coil taper integrated, whcih can be adjusted via threaded spindle. description: - upper roll : width:160mm, dia. approx. 40mm, not driven, via manual adjustment - lower roll: width: 160mm, dia. approx. 40mm, fixed, not adjustable, driven - coil taper: max. dia.=1000mm, max. width 153mm, max. weight 500kg * Nlodpfou Ic Ekex Ahfef

Condition: used, Straightening and welding plate made of steel Machined steel plate from a tool frame Length: 2980 mm Width: 1380 mm Thickness: 74 mm Nedjy N Du Ropfx Ahfelf - solid steel plate - milled surface - 4 rectangular cutouts - plate equipped with several symmetrical bores - 4 bolted towing brackets Net weight: 2175 kg

Condition: good (used), functionality: fully functional, Coil weight 350 kg Max. strip width 200 mm Njdpfx Aszfx Egjhfelf 11-roller straightening unit Roller diameter 60 mm 2 feed rollers 2 exit rollers

Condition: used, Year of construction: 1984, material width:350 mm coil weight:1 t material thickness:0,5 - 6 mm coil internal diameter:380 - 540 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 weight of straightening machine:2 t Nedet Hmk Tjpfx Ahfelf dimensions straightener (WxDxH):2,0 x 2,0 x 1,9 mm weight of decoiler:1,3 t dimensions decoiler (WxDxH):1,7 x 1,5 x 1,6 m

Condition: good (used), All information is provided without warranty. A demonstration is possible at any time in our showroom. Nljdefd R Ahjpfx Ahfof

Condition: used, Year of construction: 1985, machine/vehicle number: 30522, sheet width:120 mm coil weight:75 kg Nljdpfxocxxq Se Ahfef dimensions of the machine ca.:2,50 x 1,25 x 1,50 m

Condition: used, Year of construction: 1974, machine/vehicle number: 00-0438-01, sheet width:100 - 500 mm coil weight:ca, 6 t Nlodpfjh Ra Spex Ahfof coil internal dia.:400 - 500 mm coil external diameter:1500 mm sheet thickness - max.:0,8 - 3,5 mm feed length:max. 10 m Feed speed:max. 75 m/min. diameter of the mandrel:360 - 420, 460 - 520 mm stroke height:550 mm :7500 kp weight of the machine ca.:ukb, t dimensions of the machine ca.:ca, 3,4 x 1,7 x 2,5 m HHS Automatic Decoiler, Model - BA 1.3-050/20 Decoiler for extra wide metal sheet (500 mm width, sheet thickness from 0.8 to 3.5 mm), with hydraulic loading / supporting table, Hydraulic operated expandable Coil Mandrel with pnematic cooling ventilation. Seperate Power cabinet with Electrial Wire Diagrams and Instruction manuals avilable.

Condition: used, Year of construction: 1974, sheet width:130 mm Nedpfx Ahscxxprofolf coil internal dia.:300 - 500 mm coil external diameter:1200 mm

Condition: repair required (used), functionality: unexamined, conveyor belt thickness: 8 mm, number of straightening rollers: 9, conveyor belt width: 2,200 mm, roller diameter: 95 mm, The leveler has been disassembled! Technical specifications of the RM2300/8/9 leveler Motor power: 22 kW / Leveler throughput width: 2300 mm Max. leveling width: 2200 mm / Number of leveling rollers: 9 / Leveling roller diameter: 95 mm Number of backup rollers: 22 / Lower backup rollers: 12 / Upper backup rollers: 10 Nsdpfx Aezcm Dgehfslf Maximum sheet thickness to be leveled: 8 mm ENGLISH: Technical specifications of the RM2300/8/9 leveler Motor power: 22 kW / Leveler throughput width: 2300 mm Max. leveling width: 2200 mm / Number of leveling rollers: 9 / Leveling roller diameter: 95 mm Number of backup rollers: 22 / Lower backup rollers: 12 / Upper backup rollers: 10 Maximum sheet thickness to be leveled: 8 mm

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: D08L/8075, Offer Number: D08L/8075 Machinetype: straightening and cutting machine Make: WAFIOS Type: DRf/30 Constr. year: 1955 diameter range: 7-16 mm cutting length: 6000 mm speed - meter/min: 65 Nledpfx Aewi Svijhfof Location: In our warehouse

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Nodpfetgvgpsx Ahfelf Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder