Used Bellaform Corrugator for sale (285)

Condition: used, Year of construction: 2008, machine/vehicle number: FA55, Machine OverviewThe ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation.Operating mode: AutomaticInfeed layout: Straight infeed (inline)speed: 1500 Paks/hour (PPH) Packaging: Tray wrap with neutral film overwrapFormat range: 0.5 L – 10 LMachine configuration: Delivered without container infeed system (to be provided by the line)Year of manufacture: 2008; Overhauled: 2022Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing.Key Technical DataModel: COMBIGIOTTO 90-MBrand: ATLANTAOperating condition: Ready for operationPackage configuration: Wrap + film on trayFilm type: NeutralTray: Available (tray packaging configuration)Machine feed type: Straight (inline)Format capability: 0.5 L to 10 L containersYear: 2008 (overhauled 2022)Automation & ControlIndustrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability).Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application.Integrated diagnostics, alarm history and counters (shift/lot totals).Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status.Electrical protection degree: IP54 for the electrical system and motors.Line IntegrationContainer infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator).Inline design simplifies alignment with fillers, labellers and downstream conveying.Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration.Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering).Condition & MaintenanceOverall status: Ready for operation.Overhaul completed in 2022 to restore full functionality.Preventive maintenance recommended: periodic inspection of film path and sealing elements, collation guides, tray magazine mechanisms, and conveyor chains/belts.Documentation and spare parts recommendations can be provided during commissioning and FAT/SAT... Bljdpjxdnbzsfx Akasg

Condition: used, Year of construction: 2008, machine/vehicle number: FA56, Machine Overview Automatic tray plus film packer ATLANTA COMBIGIOTTO 90-M designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product with neutral shrink film, then conveys it through a shrink tunnel to obtain stable, retail-ready bundles. Ideal for beverage lines handling PET, glass or HDPE bottles. Reference No. FA56. Year 2008, overhauled in 2022. Condition: Ready for operation. Indicative output up to 25 packs/min, depending on product and format. Operating concept: automatic grouping of bottles, tray forming/loading, film wrapping and shrink-tunnel consolidation. Packaging configuration: Tray + neutral film (shrink). 90° infeed enables compact layouts and easy connection to existing conveyors. Key Technical Data Make / Model: ATLANTA COMBIGIOTTO 90-M Operating type: Automatic Infeed orientation: 90° side infeed Packaging: Tray + film (neutral) Tray magazine/formation: Available Nominal capacity: up to 25 bundles/min (format and product dependent) Year: 2008 (overhauled 2022) Condition: Ready for operation PLC: SIEMENS S7 E 300 Automation & Control Industrial PLC-based control with operator HMI for recipe selection, speed setpoints and diagnostics. Inverter-controlled drives for smooth acceleration and product handling. Photoelectric sensors for product presence, jam and film detection. Temperature-controlled shrink tunnel for consistent film performance. Interlocked access doors with safety monitoring for guarded zones. Line Integration Upstream: accepts bottles from conveyor with 90° transfer to the infeed section; integrated selection/divider to create pack patterns before tray loading. Downstream: discharge conveyor after shrink tunnel for connection to inspection, case handling or palletizing. Signals and handshakes typically include start/stop, fault, emergency stop circuit integration and speed reference. Mechanical interface and layout drawings available on request for line engineering. Condition & Maintenance General overhaul performed in 2022. Machine presented as ready for operation. Preventive maintenance recommended: periodic checks of film path, knife/sealing components, tray magazine/erector, lubrications and conveyor wear parts. Bedpox H Thzofx Akajlg Performance & Versatility Suitable for a wide range of cylindrical or square bottles commonly used in beverages. Typical pack patterns achievable for bottles (e.g., 2×2, 3×2, 4×3, etc.) depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray provides rigidity and stacking strength. Consistent bundle quality via controlled film wrapping and thermal shrink process. Site Requirements Electrical supply: 400 V ±5%, 50 Hz ±1%, 3P + N + PE (separate neutral and earth). Auxiliaries: 24 V DC. Instrumentation voltages: 24 V AC – 230 V AC. Electrical enclosure protection: IP54; motor protection: IP54. Ambient conditions: temperature +5 °C to +40 °C; relative humidity 30%–80% non-condensing; altitude up to 1000 m a.s.l.; no harmful gases or explo...

Condition: used, machine/vehicle number: LC555, Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h General description of the line The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h provides an industrial configuration specifically designed for the sterile filling of liquid food products. It particularly suits sensitive items such as UHT milk and fruit juices, which require controlled processing environments. Moreover, the system operates with 1-liter square containers and reaches a production capacity of 7,000 liters per hour. As a result, it ensures high microbiological quality standards. In this configuration, each machine plays a critical role in maintaining aseptic conditions from filling to final packaging. Aseptic filler Tetra Pak A3 FLEX At the heart of the Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h, the Tetra Pak A3 FLEX filler (version 100V), manufactured in 2004, performs aseptic filling using an integrated sterilization system, microbial barrier, and precise dosing mechanisms. Consequently, it processes pasteurized or sterilized products intended for extended shelf life and keeps them intact without requiring refrigeration. Furthermore, the filler maintains a sterile environment throughout the entire cycle. In addition, it ensures consistent product dosing and eliminates variability in filling performance. As a result, manufacturers can rely on this equipment to meet strict food safety requirements. Aseptic capper Tetra Pak TCA88 The line also includes the Tetra Pak TCA88 capper, built in 2006. This module applies plastic caps to filled containers using induction or mechanical systems that ensure hermetic sealing in an aseptic environment. Moreover, the capper synchronizes precisely with the filler to ensure uninterrupted operation. In contrast to conventional systems, this integration significantly reduces the risk of contamination after filling. In the same way, the TCA88 includes built-in quality control functions that verify each cap’s position and torque. Meanwhile, Tetra Pak designed the unit with safety features such as interlocked guards and error monitoring systems, ensuring full compliance with industry standards. Cardboard packer TCBP70 in this used aseptic filling line Tetra Pak Bledpfx Aowkux Nekaeg The Tetra Pak TCBP70 packer, manufactured in 2007, manages secondary packaging. This automatic system forms and fills corrugated cartons using wrap-around or preformed box configurations. Similarly, it operates with fully electronic controls that allow real-time adjustment and monitoring. Therefore, the machine supports flexible packaging layouts and rapid format changes. In addition, the TCBP70 includes safety systems such as light curtains and emergency stop devices. For example, if an operator enters the guarded zone, the system halts automatically to prevent accidents. As a result, the packaging process remains both efficient and secure. Industrial applications and operational benefits The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h targets producers in the dairy and beverage industries who require aseptic packaging capabilities. For instance, companies manufacturing milk, plant-based drinks, or fruit juices can benefit from the line’s ability to maintain sterility without cold chain logistics. In fact, the full integration of Tetra Pak modules allows manufacturers to achieve high energy efficiency, complete batch traceability, and reduced d...

Year of construction: 2019, condition: like new (used), functionality: fully functional, Box On Demand, Endless Corrugated Board, pay attention to your CO2 footprint, The machine listed here for processing endless corrugated board belongs to the series of static machines, i.e., operations across the machine are carried out while the carton is stationary. The machine is designed for high productivity. The maximum working width of the carton is 1,500 mm. All tool settings are made automatically. 1) Main Machine Body (Carton Cutting Automaton): Linear cross-cutting and cross-creasing unit for head-to-foot processing on the carton. 8 longitudinal creasing/cutting units from above for longitudinal creases and cuts in the carton Bledsyy Iqkspfx Akaeg 2) Double Carton Magazines 2 carton magazines provide for the supply and feeding of raw carton material to the processing machine. Stack height for endless corrugated board up to max. 2,000 mm possible 3) Control Cabinet, Control System, Electronics: Contains all components required for operation and control of the system. Control cabinet components are based on HOMAG standard.

Condition: excellent (used), Year of construction: 2006, Introduction SUN Bodpfoy D Huvsx Akaelg No. 4 flexo colors from the bottom High Board Line (n. 2 printing units year 2006 - n. 2 printing units year 2016) Vacuum transfer among the groups with belt and panel system HBL Transfer with vacuum transport year 2025 Max size 1200x1600 mm Available may 2027

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, FEEDER PLUS System Adjustable operator-side clamping team with Centerline references, with control of the presence of sheets Operator-side pushing team opposite Double sheets detector Centering and closing of the die-cutting equipment Waste trimming extraction station with quick tool clamping High stack exit Bobst CUBE II Above elevated by 35 cm. Blank preparation frame outside the machine Max format: 102x142 cm Min format: 50x70 cm Bljdoy D Ht Sjpfx Akaeg Min paper weight: 80 g/m² Max cardboard weight: 2,000 g Max corrugated thickness: 4 mm. Max speed: 7,000 sheets/hour Max pressure 600 Tons Available September/October 2026

Condition: used, Year of construction: 2007, functionality: fully functional, For sale is an ESKO Kongsberg DCM24 including safety enclosure. The machine is ideally suited for processing corrugated cardboard. The Esko Kongsberg DCM 24 cutting table is operational, in daily use, and can be inspected. It features automatic loading, cutting, creasing of each sheet via CAD file, and almost fully automated unloading. The machine, with automatic loading and unloading, requires a footprint of approximately 4.5 x 11.5 m. Bedsx A Tqfjpfx Akaslg The included tools are visible in the photos. One tool (05278) is bent and is being sold as defective. The buyer may be able to repair it.

Condition: good (used), Karl Tranklein PS1200 Bookbinding Shears Made in Germany. Very good condition. Cutting length approx. 1200 mm Bledpfx Akoy Ehngeasg Ideal for bookbinding board, corrugated cardboard, leather, and canvas. Front cutting stop with millimeter scale. Two additional sliding stops on the table. Feet-operated material clamp. High knives, in very good condition. Weighs over 400 kg

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 2,800 mm, Box On Demand, endless corrugated cardboard, pay attention to your CO2 footprint. The machine listed here for processing endless corrugated cardboard belongs to the series of static machines, meaning cross-machine operations are performed while the cardboard remains stationary. The machine is designed for high productivity. The maximum working width for cartons is 2,800 mm. All tool settings are adjusted automatically. 1) Main machine body (automatic carton cutting unit): - Linear cross-cutting unit for head-foot cuts and cross-cuts on the cardboard. - Linear cross-creasing unit for cross-creasing the carton. (Available as a cross-creaser, or as a cross-creaser with perforation feature.) - 8 longitudinal creasing units from above for longitudinal creases on the cardboard. - 8 longitudinal cutting units for executing the longitudinal cuts. 2) Carton changer, 4-way cassette feed The motor-driven carton changer, operated with a lifting axis, uses 4 separate cassettes to feed cardboard into the main machine body’s infeed. Each cassette can accommodate raw material web widths up to 2,800 mm and feeds them automatically to the main machine body upon request from the machine control system. The third cassette can accommodate two working widths. 3) 5-way carton magazine Five carton magazines supply and feed the raw cardboard to the processing machine. Stack heights of endless corrugated cardboard up to 1,500 mm are possible. 4) Control Cabinet, Controls, Electronics: Bodeyxw Agopfx Akaelg Includes all components required to operate and control the system. Control cabinet components are based on Siemens technology.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Lifting and traction suction unit for cutting, grooving, and perforating up to 6 mm cutting thickness. Suitable for paper, cardboard, corrugated board, and synthetic materials. Includes software and PC. Bjdetrty Ijpfx Akaslg

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch Bjdpeyuuzdefx Akaelg • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: new, Year of construction: 2025, length in total 7969 mm band width 700 mm conveying height 2500 mm total power requirement 0,75 kW Please complete the attached form and return it to us by email for quotation preparation. Hinged Belt Conveyors – Overview & Features General - Hinged belt conveyors can be manufactured according to purpose and dimensions. - The design and belt system are robust and durable, provided regular maintenance is carried out. - Most commonly used type of chip conveyor. Applications Transport of: - Long, coarse, corrugated, and crumbly chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. - Designed for conveying chips from the production process. - Separation of cutting oil/coolant from the chips. Versions - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. Bsdpfx Akjymf Tnsaelg - Chain pitch selected according to the amount of chips to be conveyed. - Conveyor width, length, motor, and gearbox are matched to the hourly conveying capacity. - Coolant recycling is taken into account during the design. Control - Operation via control panel or CNC control of the machine tool. - Control via plug-in connection possible. Note: Images are for reference only and are not to scale.

Condition: new, length in total / mm band width / mm conveying height / mm Control / Please complete the attached form and return it to us by email for quotation preparation. Hinged Belt Conveyors – Overview & Features General - Hinged belt conveyors can be manufactured according to purpose and dimensions. - The design and belt system are robust and durable, provided regular maintenance is carried out. - Most commonly used type of chip conveyor. Applications Transport of: - Long, coarse, corrugated, and crumbly chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. - Designed for conveying chips from the production process. - Separation of cutting oil/coolant from the chips. Versions Blodeymf Hnspfx Akajg - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Chain pitch selected according to the amount of chips to be conveyed. - Conveyor width, length, motor, and gearbox are matched to the hourly conveying capacity. - Coolant recycling is taken into account during the design. Control - Operation via control panel or CNC control of the machine tool. - Control via plug-in connection possible. Note: Images are for reference only and are not to scale.

Condition: excellent (used), Year of construction: 2016, As good as new machine for the production of corrugated cardboard honeycomb. New price €600,000.00 Bljdpetqpd Hjfx Akaeg

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Excellent condition! Only 33,000 hours worked! Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Bledpfx Asu Snwmekasg Max speed: 7,500 p/h

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Bodjv Nzpgepfx Akaslg Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm Blodpfxex Ndu De Akaog - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Bsdpjyxq Ucofx Akaelg

Condition: used, Year of construction: 2002, Die-cutter Iberica JRK-105 Year: 2002 Description: Stripping unit Blanking unit Technical specifications: Maximum sheet size: 750 x 1050 mm Minimum sheet size: 350 x 400 mm Minimum paper thickness (according to quality):90 – 95 g/m2 Maximum cardboard thickness: 1.5 mm Maximum corrugated board thickness: 3 mm Maximum operational pressure: 300 T Maximum speed: 8500 sheets/hour Main drive motor with variable speed: 20 CV (15 KW) Total power installed: 43 CV (32 KW) Air required pressure: 6 KG / CM2 Blodpfov Rci Dex Akaog Machine appr. Weight: 23.600 KG Floor space occupied: length 10.10 M. width 6.26 M. height 3.30 M.

Condition: used, Year of construction: 2020, functionality: fully functional, We are offering this used EMproject89 MS 1700 TWOCOL, year of manufacture 2020. Machine type: MS 1700 TWOCOL Serial number: 24/2020 Year of manufacture: 11/2020 Voltage: 220 V Rated power: 1.5 kW Suitable for flexographic printing, carton printing, corrugated board, and packaging. Bedpfeyz T H Hjx Akajlg If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, The used Kerres KBW 200 meat washer from 2012 is an efficient device designed for washing bins in food processing plants. The stainless steel construction, high-quality workmanship and proven German technology make the KBW 200 model ideal for everyday industrial use. The device ensures effective cleaning thanks to powerful pressure nozzles, a filtration system and adjustable operating parameters. It is the ideal solution for companies that value hygiene, reliability and media savings. Technical specifications: Manufacturer: Kerres Model: KBW 200 Year of manufacture: 2012 Capacity: 30 trays/h Material: stainless steel Power supply: 400V, 3Ph Power: 13kW Compact design – ideal for smaller spaces: L: 3,6m, W: 1,7m, H: 2,6m Bedjwfftgjpfx Akaolg Used Kerres KBW 200 corrugated sheet washer – efficient and compact device for washing containers in the food industry. Proven German quality.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: HBJ-200179, total width: 1,850 mm, total length: 3,600 mm, total height: 1,700 mm, overall weight: 2,400 kg, Dakiou HBJ-D1200: High-Speed Automatic Carton Erecting Machine The Dakiou HBJ-D1200 is a high-performance, dual-station automatic carton erecting machine, engineered for the efficient production of eco-friendly paper-based packaging. It is the ideal solution for the food sector and is capable of manufacturing a wide range of items such as hamburger boxes, French fry cartons, takeaway containers, and meal trays. Condition and Specifications • Age & Origin: Manufactured in November 2020, this machine is a relatively recent addition to the market. • Condition: Very good condition with low operating hours. The unit is well maintained, fully operational, and ready for immediate integration into production without any technical issues. • Tooling & Flexibility: Supplied with a complete range of tooling for each box type the machine can manufacture, enabling quick changeovers. Bledpfxsy H E S Ee Akaeg Dakiou HBJ-D1200 – Technical Data • Production Capacity: 80–320 pieces/minute • Suitable Materials: 200–600 g/m² paperboard; corrugated board up to 1.5 mm (~0.06 inch) • Length (L): 100–450 mm (3.94–17.72 inches), angle: 5°–40° • Width (B): 100–400 mm (3.94–15.75 inches) • Height (H): 15–200 mm (0.59–7.87 inches) • Power Requirement: 6.25 kW • Net Weight: 2,400 kg (~5,291 lbs) • Machine Dimensions (L x W x H): 3,600 x 1,850 x 1,700 mm (~141.7 x 72.8 x 66.9 inches) • Power Supply: 380 V, 50 Hz

Year of construction: 2019, condition: like new (used), functionality: fully functional, For sale is a BOXMAKER® carton production machine by Horstmann Maschinenbau, designed for the flexible manufacturing of custom shipping cartons—precisely in the required size and quantity. Your advantages at a glance: • Produce cartons "just in time"—individually controlled via touch panel • Reduction of storage costs and packing materials • Lower shipping costs thanks to perfectly fitting packaging • Fewer transport damages, increased customer satisfaction • Processes continuous corrugated board or sheet stock; complex cuts are possible Bledpfoylw Nlox Akajg Ideal for industry, wholesale, fulfillment, and e-commerce operations looking to optimize packaging processes for greater efficiency, sustainability, and independence.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, year of last overhaul: 2023, punching force: 300 t, We offer a choice of two identical 2006 machines. 2006 IBERICA 105 SPEED Max sheet size : 750 x1050mm, Min Sheet size : 350 x 400mm, Max mechanical speed : 9000 sph, Max impression strength : 300 tons. Max Carton board : 1.5mm, Mini Paper : 90/ 100 gm2, Max Corrugated board : 3mm, Direct Pallet loading Non stop feeder, Full complement of infeed table furniture, Left hand side pull register lay with sensor, Touch screen, Double action stripping, Automatic Non stop delivery with belt and programmable counter, Bedpfxeqzhr De Akaslg Centre line, Quicklock on chase and stripping, Micrometric thin plate system, Elevated, Complement of stripping equipment PRICE: £110,000 Ex works for either

Condition: used, Year of construction: 2012, Overview  This packaging machine for cups was built in 2012 by the German manufacturer Schubert. The machine was last used by a dairy company, is in a well-maintained condition and is available immediately. Technical details  Output: 270 cups/minute Format range Round cups D = 63 - 95 mm H = 35 - 125 mm 2 - chamber cup 86 x 86 mm 109 x 109 mm (square) 125 x 95 mm (oval) Type of packaging Primary packaging Cups in sleeves, then in trays and crates Format range, max. sleeve length flat blank: 450 mm Secondary packaging Trays and trays: Solid cardboard (trays) and corrugated cardboard Format range, flat cut: 200 x 400 mm - 600 x 800 mm Tray height = 15 - 55 mm Tray height = 35 - 100 mm Last used for Tray 24 Tray of 8 12 tray Control: Schubert via individual modules Weight: approx. 15 tons Further information, pictures and videos of the machine on request Bodpfx Akjvpd S Roajlg