Used Beckman Coulter Dxflex Pressure Flow Cytometer for sale (16,046)

Year of construction: 2006, condition: ready for operation (used), A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible. Bjdpfxozka Imj Afkslk

Condition: used, Year of construction: 2008, operating hours: 17,410 h, functionality: fully functional, machine/vehicle number: 400149, pump pressure: 6,000 bar, power: 75 kW (101.97 HP), FLOW Waterjet Machine with INTEGRATED FLYING BRIDGE We are selling our Flow waterjet machine, including a stainless steel water tank, a 6000 bar pump, and sand/abrasive feeding system. The sand filter (wastewater treatment) is optional and not included in the price. The machine has been with us since 2008 and has not been in operation since July 2, 2026. The machine will be replaced by a new acquisition. The machine is disassembled and ready for transport. The machine is in very good condition. It is fully functional and can be inspected at any time. Manufacturer: Flow International Corporation, 1635 Jeffersonville, Indiana 47130, USA Year of manufacture: 02/2008 Model/Type: IFB INTEGRATED FLYING Bridge Serial No.: 400149 Transport dimensions: Blsdpeza A Ayjfx Afksk Overall height: 220 cm Overall width: 480 cm Overall length: 450 cm Tank size: Length: 425 cm Width: 255 cm Cutting area: Length: 365 cm Width: 182 cm Data sheets for the machine, pump, and software are available (PDF upon request). Inspection before purchase is possible and desirable. Delivery available upon request. Sold in its current condition, as shown in the pictures.

Condition: new, functionality: fully functional, total height: 1,640 mm, total length: 1,400 mm, total width: 1,100 mm, overall weight: 267 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 1000VH – 960 m³/h – 400 V Extraction table, welding and grinding table. Extraction table with a 1.1 kW fan, filter cartridge, and wooden slats, as well as a rear wall with extraction and a ceiling and side walls without insulation. The extraction table with automatic compressed air cleaning filter and integrated fan for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Extraction capacity: 960 m³/h Dust class: M Working area W/D in mm: W 892 / D 765 Working height in mm: H 690 - 924 Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1400* / D 1100 / H 1640 (optional L = 1500/2000 mm available) Compressed air connection: Yes, min. 5.5 - max. 6.0 bar (for filter cleaning) Fan power: 1.1 kW Operating voltage: 3 x 400 V, 50 Hz, 2-pole Noise level*: 65 db(A) without cleaning / 85 db(A) without cleaning Pipe connection: D = 250 mm Color: RAL 7042/RAL 7011 Weight: 267 kg * With fan and nozzle Application: The extraction table with a fan is used to separate dust and welding fumes from the process air. Suitable for work where vapors and dust are generated, such as welding, grinding, etc. Bedpfx Afezdty Nskelk Your advantages of the ISI-Flow Desk series: - 12 device variants available - Filtration with compressed air-cleaned filter cartridge according to dust class M - Automatic filter cleaning by pressing a button on the front - Differential pressure gauge for easy monitoring of the cleaning requirement - Integrated, energy-efficient fan 3x400V, 50 Hz, 2-pole; closed fan blades, backward-curved, self-cleaning impellers; ISO 14694 (BV3 G 6.3) balanced - Rear wall, side walls, and ceiling ensure effective extraction and holistic air flow - Height-adjustable work table - Wide range of mounting and connection accessories - Quality Made in Europe For safe, effective air flow from extraction to exhaust. The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may contain accessories.

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 2000E – 2880 m³/h – 230 V Extraction table, welding and grinding table with electric height adjustment The ISI Flow Desk 2000 E extraction table is a height-adjustable workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 2880 m³/h Work surface W/D in mm: W 1990 / D 824 Work height in mm: H 638-938 mm Table load: 200 kg/m (wood, with evenly distributed load) Work surface: Wood slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 2000 / D 1100 / H 938 (optional L = 1000/1500 mm available) Fan power: without fan Operating voltage: 1 x 230 V, 50 Hz Pipe connection: D = 251 mm Color: RAL 7042 / RAL 7011 Weight: 191 kg Application: The workbench is used for extracting non-explosive, dry dust and gases. The table is designed for both standing and seated work with full knee clearance, focusing on ergonomics. For even more efficient work, the extraction table offers a wide range of optional accessories: - Back wall, side walls, and ceiling – optionally with soundproofing and lighting - Slats made of wood, steel, stainless steel, or plastic - Perforated steel plate on top of wood slats - Vise holder - Holder for pipe welding - Spot extraction arm Your advantages of the ISI-Flow Desk series: - 12 device variants available - Piping can be connected on the right, left side, or on both sides - Electric height adjustment at the push of a button - Wide range of mounting and connection accessories - Quality Made in Europe Bsdpozdtwzjfx Afkjlk The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may contain accessories.

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-FLOW DESK Standard – 1000S – 1700 m³/h Extraction table, suitable for gluing, sanding, polishing, welding, or manual cutting. The ISI Flow Desk 1000 S extraction table is a simple standard workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 1700 m³/h Work surface W/D in mm: W 980 / D 960 Work height in mm: H 638-938 mm Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1076 / D 1000 / H 938 (other lengths and depths available as options) Fan capacity: without fan Pipe connection: D=161 mm Color: RAL 7042/RAL 7011 Weight: 100 kg Application: The workbench is used for extracting non-explosive, dry dust and gases. It can be used as a gluing, sanding, polishing, welding, or manual cutting table. Your advantages of the ISI – Flow Desk series: - 8 device variants available - Simple connection to extraction system via nozzle at the end of the table - The design of the table allows working from 3 sides - Height adjustment - Wide range of assembly and connection accessories - Quality Made in Europe Bedpfx Afezdtqujkelk The ISI Air extraction table must not be used in conjunction with ATEX zones.

Condition: used, Year of construction: 2004, functionality: fully functional, The machine is used, but in good condition. It can be inspected while in operation. Bedpfezp Ik Tjx Afkslk

Condition: good (used), Year of construction: 2013, operating hours: 18,600 h, functionality: fully functional, water pressure: 4,000 bar, Waterjet FLOW MACH 3 Year of production: 2013 Working area: 3000x2000 Working hours: 18600 Advantage of the machine DWJ - automatic compensation of the verticality of the cut Blodewmcmtjpfx Afkek Availability: 6 months Location: Croatia Parity: EXW Belišće

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Blodpfx Aotrdyrefksk Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 waterjet cutting system for sale A very well-maintained Flow Mach 200 waterjet cutting system from 2021 is available for sale, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single-piece and small-batch production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive hand deburring system – EKOWA cutting water treatment system Blodpoy Urziofx Afkek – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Immediately ready for operation Asking price: €115,000 net Inspection possible by appointment. More pictures and information available upon request.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 900 h, number of axes: 3, This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information. • Operating hours: less than 800 hours • First commissioning: September 2021 • Working area: 4020 × 2020 mm (4 m × 2 m) Blsdpfx Afex Sz A Rokjk • Design: Cantilever (gooseneck-type) structure • Axes: 3 axes (X, Y, Z) driven by ball screws • Software & control: FlowMaster license included; FlowMaster programming/control installed on the machine control station and an additional customer PC • Abrasive waterjet cutting system: • Cutting head: Flow PASER 4 with high-pressure ON/OFF valve • High-pressure generation: • Pump: Flow Hyplex Prime 30 ultra-high-pressure pump • Maximum pressure: 4,150 bar • Features: High efficiency with integrated autonomous cooling • Workpiece support tank: Heavy-duty painted steel tank, independent from the machine axes Additional equipment • High-pressure piping kit (from pump to cutting head) • Laser pointer for positioning (red dot for program alignment) • UltraPierce system (abrasive suction/Venturi) for chip-free piercing of sensitive materials (glass, stone, composites, plexiglass) • EcoFlow cutting sludge extraction system with pneumatic diaphragm pumps and hopper for abrasive recovery into a big bag • Flow abrasive feeding system

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: B1JAU25/95, DN400 Ball Valve Assembly + Pneumatic Actuator (Valmet / Neles) 1) Description Manufacturer: Valmet Flow Control (Neles brand) Valve: M1JW400ASGA – Trunnion-mounted ball valve, PN10, DN400, body CF8M (AISI 316), graphite packing Actuator: B1JAU25/95 – Single-acting pneumatic actuator (spring to open), ISO 5211 / VDI/VDE interface, size 25, shaft bore Ø95 mm Mounting Plate: QX35K05HDM – Neles interface for valve/actuator coupling Year: 2023 Condition: New / never installed, stored in original wooden crate (photos available) Compliance: CE marking (ATEX if applicable to control accessories – see nameplate) 2) Construction & Materials Body: Stainless steel casting 1.4408 / CF8M Type: Trunnion-mounted quarter-turn ball valve (low operating torque, low ΔP) Seats / Packing: Graphite (for severe service, high temperature resistance, low friction) Flanges: industrial drilling (details available on request) Blsdpfjyhxppox Afkek 3) Performance (indicative / to be confirmed by serial datasheet) PN: 10 (body marked PN16 on associated part; can be delivered as PN10) Nominal diameter: DN400 Service: industrial fluids, air/gas, low-pressure steam, chemical/energy process, heavy-duty HVAC Mounting: single-acting actuator (spring fail-safe → opens in case of air supply failure) 4) Scope of Supply Complete pre-assembled valve with B1JAU25/95 actuator QX35K05HDM mounting plate Control block (solenoid valve/filtration/regulation) visible in the photo Wooden crate + protective materials 5) Applications Compressed air units / boosters (line isolation/bypass) Industrial processes (chemicals, energy, paper mills, incinerators, cement plants) Large flow industrial HVAC networks

Year of construction: 1988, condition: ready for operation (used), A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible. Bsdpfsvmq Tisx Afkjlk

Condition: as good as new (ex-display), Year of construction: 2023, Briefly stated: Base axis (X): 1.3-2 mm Outrigger (Y): 1.3-4 mm Accuracy: 0.06 mm Technical data Linear axis accuracy: ± 0.1 mm/m Maximum travel speed: 10 m/min Acceleration: 0.02 g Repeatability: ± 0.06 mm Circular accuracy: ± 0.1 mm Z-axis stroke: 180 mm Base axis (X): 1.3 m, 3 m, 4 m Outrigger (Y): 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce1 drilling guide Splash guard1 FlowTexturing (FTT) Abrasive slurry system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Deionized water conversion kit Bodehw Nfqopfx Afkolk * Required for FlowTexturing

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,240 h, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Application Types Cutting Bedpfx Afex D Rxpjkolk

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Bodpfx Aefz Dvvjfkjlk • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Bjdpfx Aofz Ax Sofkslk The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Bsdpfx Aeflpmqjfkslk • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Bsdpfjfzrapex Afkolk ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Bedjfz A D Njpfx Afkslk ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: excellent (used), Year of construction: 2021, operating hours: 144 h, I will sell a water-abrasive jet cutting machine from Flow. Model Mach 100 The machine has worked 144 working hours The machine has been checked and valued by an expert from FLOW Cutting area 3x2 meters. The machine is in very good technical condition - used occasionally for own production, has only worked hours. Less than 2 tons of garnet processed. The machine is currently running and fully ready to work, it is possible to fully test it before purchase. In I have many spare parts for the device: - mixing tubes. - diamond orifices - mixing bodies - large service kit for the pump (major kit) - head covers The device has an attachment for piercing brittle materials such as glass, ceramics. Working area: Z-axis feed: 178mm Net cutting area X-axis min. 3,000 mm Y axis min. 2,000 mm Machine accuracy: On linear axis at 20 °C +/- 3 °C - linear positioning accuracy of X and Y axes: +/- 0.10 mm/m - repeatability of X and Y axes: +/- 0.06 mm (complete working area) Circularity test: : +/- 0.013mm Machine speed - Technological speed up to 10 m/min - Maximum shape speed: up to 5 m/min - Acceleration 0.05 g Light gate The light gate prevents entry into the front, rear and side of the machine in cutting mode. - FlowMaster PC control - Simple and logical user interface - user-friendly menu structure based on pictograms - unique creation of a cutting path with the possibility of modification with automatic generation of inputs and outputs and travel routes. - exclusive SmartStream technology Bljdpfxjurv Nvj Afksk - Every beginner becomes a professional - Ensures high-quality parts - Dynamic language switching: operators can work with the software interface in the language of their choice without having to restart the program - Context-sensitive tool tips and integrated Help function - Simple and fast definition of edge surface quality - Feed potentiometer from 0 to 125% - Automatic calculation of working times - PASER 4 cutting head - Paser 4 abrasive metering system - Paser CF900 abrasive storage and transport system - Flow HyPlex prime 30 ultra-high pressure pump - Flow UltraPierce piercing system - Technical specifications: - Designed for 4150 bar - 3800 bar continuous working pressure - 22 kW (30 HP) motor power - Maximum water flow 3.1 l/min - Maximum temperature at inlet 21°C - Air pressure 6.2 -8.3 bar - Mains voltage 400V, 50 Hz, 3 phases - Dimensions (W x D x H): approx. 1,524 x 914 x 1,033mm - Weight: approx. 850 kg - HyPlex Prime pump cover - HyPlex Prime hydraulic pump tool kit - HyPlex Prime tool kit - High-altitude piping package In addition, you can buy the device - Polish manufacturer Airpol modek k5 compressor, power 5.5kW - DSsystem pneumatic lift with 10 suction nozzles and sheet metal peeling system, lifting capacity 1 ton - Wiessmann water treatment plant

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system Bsdpfx Asvvl Ugofkolk -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 8,900 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 178 mm, table length: 4,000 mm, table width: 2,000 mm, rapid traverse X-axis: 12,700 m/min, rapid traverse Y-axis: 12,700 m/min, rapid traverse Z-axis: 12,700 m/min, 💧 FLOW MACH 4 4020 – 5-Axis Waterjet Cutting Machine Year of manufacture: 2015 Working area: 4000 × 2000 mm (4 × 2 m) Cutting head: 5-axis (XD/dynamic bevel head) Pump hours: approx. 9,000 h Condition: Very good Service status: Regularly serviced, fully operational 🔧 Machine Overview The Flow Mach 4 4020 is a high-performance industrial waterjet cutting system tailored for demanding production environments. With its 5-axis XD cutting head, it enables dynamic bevel cutting, taper compensation, and precise 3D geometries—ideal for accuracy-driven and advanced applications. Despite its year of manufacture, the machine is in outstanding technical condition and has received professional, scheduled maintenance throughout its lifespan. All servicing has been performed on time, guaranteeing reliable, stable operation. ⚙️ Key Features - Working area: 4000 × 2000 mm - 5-axis XD cutting head – enables bevel cutting and taper compensation - Robust gantry construction for high precision - Industrial CNC control system - Capable of processing metals, stone, composites, glass, and technical materials 💦 High-Pressure System - Pump operating time: approx. 9,000 hours - Pump and high-pressure components serviced in accordance with manufacturer guidelines - Stable pressure and consistent cutting performance ✅ Condition & Maintenance - Machine in very good overall condition Blsdpfxsyaiqqj Afkek - Continuously maintained during operation - No outstanding maintenance tasks - Ready for immediate integration into production 🎯 Summary This Flow Mach 4 4020 represents a well-maintained, proven industrial waterjet cutting solution with powerful 5-axis capability. It offers an excellent opportunity for companies seeking a dependable, high-precision system without the cost associated with new equipment. 📩 Contact us for further technical information, additional photos, or a customized commercial quotation. Included equipment: - Abrasive delivery system - Special tool for pump cylinder disassembly (FLOW hydraulic wrench) - Various spare parts The machine is fully functional, features low operating hours, and is immediately ready for use. It is the ideal solution for organizations seeking a reliable, large-format waterjet cutting system—including all essential accessories.

Condition: used, functionality: fully functional, Good working condition. Please check out our other listings as well. Bodjupx E Uepfx Afkelk

Condition: used, functionality: fully functional, Flow Cabinet/Safety Cabinet. Good working condition. Please check out our other listings as well. Blodpfx Ajupx E Ijfkjk

Condition: like new (used), Class H vertical tube ultracentrifuge rotor. Max speed of 80,000 RPM and max RCF of 510,000 x g. K-factor of 8. Blodpjhg Ulvsfx Afkjk Capacity of 8 x 5.1 mL Good working condition. Please check out out other listings as well.