Used Bauer Bg20-37/Dv08Ma4-Tof/Mg for sale (4,753)

Condition: good (used), geared motor, electric motor -Speed: 72 rpm -Power: 0.25 kW -Design: B14 angle -Shaft: Ø 20 mm -Protection class: IP 65 Bdjdpfsb A Rm Ejx Akasb -Dimensions: 320/200/H220 mm -Weight: 9.5 kg

Condition: good (used), geared motor, electric motor -Speed: 17.5 rpm -Power: 0.18 kW Bjdpfeb A Rktex Akasdb -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 16 kg

Year of construction: 2008, operating hours: 13,480 h, condition: used, Field of application: Construction Make of engine: CAT Please contact Mohamad Fattah Ahmad for more information Bodsh Tyyzopfx Akajdb

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System Bdodpfxsvcnpas Akaob HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Bdsdpfsfnk Ehox Akaeb Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Year of construction: 2020, condition: ready for operation (used), overall weight: 4,920 kg, total width: 1,460 mm, total height: 1,520 mm, product length (max.): 2,925 mm, Roll bending machine manufactured in 2020. This MG MG4R1520C features a working width of 1,550 mm and a bending capacity of 20.0 mm. It includes a CNC TouchCommand EVO control for enhanced precision and efficiency. If you are looking to get high-quality bending capabilities, consider the MG MG4R1520C machine we have for sale. Contact us for further details. Bdodpfx Aksy Ifrzjaob • working width: 1,550 mm • Bending / pre-bending capacity: 20.0 / 16.0 mm • Top roll diameter: 270 mm • Bottom roll diameter: 260 mm • Side roll diameter: 220 mm • Drive power (central hydraulics): 7.5 kW (15 A) • Control: CNC TouchCommand EVO • Electrical supply: 400 V, 50 Hz, 3Ph + PE Additional equipment • Crowning of rolls • Inductive hardened rolls • Calibration device • Cone bending device • Hydraulic brake for top roll • Additional roll (1,550 x 230 mm)

Condition: ready for operation (used), Year of construction: 2007, cutting diameter 320 mm saw band length 3400 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 400 mm capacity 45 degrees: flat LI 320 x 280 mm capacity 45 degrees: flat RE 320 x 260 mm capacity 60 degrees: flat RE 320 x 140 mm band speed 35 + 70 m/min work height max. 930 mm voltage 400 V total power requirement 2.67 kW weight 950 + 250 kg well-maintained condition (!!) current new price incl. accessories ~ 40.000 Euro Bedpfsym D Drex Akaedb special price on request - in checked conditions - machinevideo - ?v=AHgMDxAcpgE Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - miter cuts are carried out fully automatically * electro-hydraulic miter adjustment left right - Up to 99 cutting programs - Central operation of all machine functions from the front - Loading also possible from above - Precise positioning thanks to accurate measuring system - electro-hydraulic miter adjustment left right - Electro-hydraulic material clamping - electro-hydraulic infeed from the saw arm * steplessly adjustable (cutting pressure control) - Operating instructions (PDF) * Special accessories included : - BAUER material feed unit - Micro-dosing device (spray oiler)

Condition: used, mileage: 539,900 km, power: 278 kW (377.97 HP), first registration: 12/2013, fuel type: diesel, empty load weight: 14,770 kg, maximum load weight: 13,230 kg, overall weight: 28,000 kg, axle configuration: 6x2, wheelbase: 4,600 mm, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,200 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Volvo FM370 6X2*4 Flatbed with Crane First registration: 12/2013 539,900 km Euro 6 emission standard Globetrotter cab with 1 bed I-Shift gearbox VEB engine brake Air conditioning Air suspension on the rear axle Gross weight variant: 28,000 kg 3rd axle steerable and liftable Tires: 385/55 R22.5, tread approx. 50% Bjdpfjy H In Asx Akaedb Tires: 315/70 R22.5, tread approx. 50% Wheelbase: 4,600 mm Total platform length: 6,900 mm Loading area: 6,200 mm Unladen weight: 14,770 kg Crane: Kennis Hyva K14 R 60-2 The crane can travel along the entire platform and be used as needed. This makes it possible, for example, to load behind the cab or at the rear of the vehicle. The crane is foldable. Crane year of manufacture: 2014 Top seat control 5th and 6th hydraulic control circuit Rotator included Pallet fork included Separate HATZ diesel engine 2 hydraulic extensions 3.40 m / 4,100 kg 4.70 m / 2,900 kg 6.00 m / 2,200 kg The vehicle is from first ownership and is in well-maintained condition. Export/net price: 37,900 Euros All information subject to change without notice; errors excepted.

Condition: used, mileage: 539,900 km, power: 278 kW (377.97 HP), first registration: 12/2013, fuel type: diesel, empty load weight: 14,770 kg, maximum load weight: 13,230 kg, overall weight: 28,000 kg, axle configuration: 6x2, wheelbase: 4,600 mm, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,200 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Volvo FM370 6X2*4 Flatbed with Crane First registration: 12/2013 539,900 KM Euro 6 emission class Globetrotter cab with 1 bed I-Shift gearbox VEB engine brake Air conditioning Bedpfx Asy H Invekaedb Rear axle air suspension Weight variant: 28,000 kg 3rd axle steerable and liftable Tyres: 385/55 R22.5, tread approx. 50% Tyres: 315/70 R22.5, tread approx. 50% Wheelbase: 4,600 mm Total flatbed length: 6,900 mm Loading area: 6,200 mm Unladen weight: 14,770 kg Crane: Kennis Hyva K14 R 60-2 The crane can travel the entire length of the flatbed and be used at any position. This allows for loading, for example, behind the cab or at the rear of the vehicle. The crane is foldable. Crane year of manufacture: 2014 Top seat control 5th and 6th hydraulic functions Rotator included Pallet fork included Separate HATZ diesel engine 2 hydraulic extensions 3.40m / 4,100 kg 4.70m / 2,900 kg 6.00m / 2,200 kg The vehicle is from first owner and in well-maintained condition. Export / net price: 37,900 Euro All information without guarantee, errors excepted.

Condition: used, Year of construction: 2010, Vertical metal band saw Manufacturer: Bauer Model: VG 450 L Year of manufacture: 2010 Cutting capacity: 90° round = 450 mm 90° flat = 450 x 620 mm 45° left = 450 x 420 mm 45° right = 450 x 390 mm 30° right = 450 x 250 mm Material feed height: 930 mm Saw band wheel Ø: 450 mm Saw band dimensions: 4,450 x 34 x 1.5 mm Cutting speed: 35, 70 m/min. Optional stepless adjustment Saw band guide: Deflection rollers + carbide jaws Material clamping: manual via handwheel + trapezoidal spindle Saw frame feed: hydraulic cutting pressure control Material feed: manual Spraying device Compressed air: min. 2 bar Designed for mitre cuts Saw motor: 2.2 kW Bjdeyfib Hjpfx Akajdb Coolant pump: 0.1 kW Hydraulic pump: 0.37 kW Space requirements (L/W/H): 2,150 x 1,400 x 2,250 mm Weight approx. 900 kg Operating instructions ä16426

Condition: used, New: Yes Please contact us for more information. Bdjdpfjy Aav Dsx Akajb

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,000 kg, fuel type: diesel, color: red, power: 50 kW (67.98 HP), total length: 2,270 mm, total width: 880 mm, total height: 1,120 mm, Continuous output: 50 kW / 62.5 kVA Maximum output: approx. 55 kW Voltage: 230 / 400 V Frequency: 50 Hz Bedpfx Akoy Dtwkoajdb Speed: 1,500 rpm Power factor: cos φ ≈ 0.8 Engine: 4-cylinder diesel Displacement: approx. 4.15 litres Cooling: water-cooled Generator: brushless, AVR (automatic voltage regulation) The unit is equipped with ATS (Automatic Transfer Switch) CE marking: YES Please do not hesitate to contact us for further questions.

Condition: used, Year of construction: 2007, Offset 5 color KBA Rapida 74-5 Year: 2007 Number of impressions (mio): 69 Machine control - ColorTronic - ErgoTronic Console - Lithec Feeder - Suction feeder table - Double sheet control Printing units - Number of printing unit(s): 5 - Straight machine - PWHA Semi Automatic Plate Change - Varidamp dampening - Automatic inking roller washing device - Automatic blanket washing device - Cooling system: Baldwin Balcontrol Delivery Bdodpfx Aeyibqfskajb - Standard delivery - Non-Stop delivery - Powder spray: Weko AP232 Accessories - Compressed air compressor: Kaeser Max. output (s/h): 15000 Max. sheet size (mm): 605 x 740

Condition: used, functionality: fully functional, Year of construction: 2001, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 190 mm, side roll diameter: 170 mm, roller length: 2,600 mm, working width: 2,500 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, overall weight: 2,800 kg, total length: 4,500 mm, total width: 1,000 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, hardened rollers, Bending capacity -Plate width : 2500 mm -Rolling plate thickness: 6 mm -Prebend thickness: 4 mm Bdodpfxsy H Ayte Akaob Rolls dimensions: -Useful length 2600 mm -top roll D 190 mm -side rolls D 170 mm Configuration of the machine Rolls hardened induction treatment, high strength surface of the 3 rolls • Power driven total on the 3 rolls, hydraulic motor each roll • Conical bending hydraulic attachment • Re-rolling system welded shells rounding. • Opening hydraulic front drop-end • Electric 3 phase 380/50 Vac, power 5,5 Hp. • Speed infinitely variable slow-fast stepless • Digital position readouts of the bending rolls.

Condition: used, Year of construction: 2004, functionality: fully functional, power: 2.5 kW (3.40 HP), cutting height (max.): 450 mm, control type: NC control, Equipment: CE marking, documentation/manual, Vertical band saw for sale with fully automatic feed system. Condition Used Year of construction 2010 Vertical metal band saw including infeed and outfeed roller conveyor Cutting range: 90° round = 450 mm 90° flat = 450 x 620 mm 45° left = 450 x 420 mm 45° right = 450 x 390 mm 30° right = 450 x 250 mm Material feed length: 6000 mm Band wheel diameter: 450 mm Saw band dimension: 4,450 x 34 x 1.5 mm Saw band speed: 35, 70 m/min. Steplessly adjustable as special accessory Saw blade guidance: circulation rollers + carbide jaws Material clamp manual via handwheel and trapezoidal spindle Saw frame feed: hydraulic cutting pressure adjustment Material feed: automatic Spray device Network air pressure: min. 2 bar Engineered for mitre cuts Saw motor: 2.2 kW Coolant pump: 0.1 kW Bdedpjyx U A Dsfx Akasb Hydraulic pump: 0.37 kW

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, total width: 2,440 mm, total length: 3,320 mm, total height: 2,130 mm, overall weight: 8,200 kg, input frequency: 50 Hz, input current: 30 A, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, space requirement width: 2,440 mm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Bjdpfx Asx Hzm Sskasdb

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm capacity degrees: square 85 x 85 mm turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. Bjdpfsyu U Dfsx Akaodb 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero QTX-340, The device was used for research purposes. SPE-Spero QTX-340, MIR microscope with 'Hyper Spectral Imaging' capability. Spectral coverage of the fingerprint region (1900 - 950 1/cm). High-Resolution IR Objective: 12.5X; NA: 0.7, 650μm FOV. Enhanced LowMag Lens Visible: 4.0X; NA: 0.13, 650μm FOV. 480*480 pixels, Broadband Microbolometer Camera, Visible camera. QT-Laser-Performance-Package including high precision automated stage (< 1μm repeatability). High-speed data acquisition, joystick, control computer, Win10. 'Discrete Frequency IR Imaging' in real time. Transmission and reflection mode. 4000 hours laser active time. Bedpfey Dcd Hex Akaedb

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, We are offering this refurbished MG Recycling M_04772 cable granulator, year of manufacture 2006. It was fully overhauled in 2024. New control cabinet, new blade sets. Includes Wagner pre-shredder type WS 15, year 2007, 15 kW, feeder belt, extraction system and magnetic vibrating table from 2021. Throughput: approx. 150–180 kg/hour, depending on material. Location: Switzerland, 8260 Stein am Rhein. Asking price: negotiable, EUR 89,000 Bdodpfx Ajy D Ug Tjkaeb If you have any questions or require further information, feel free to send us a message or call us.

Condition: good (used), Year of construction: 2018, MG Tech Leanbox Case former Bsdpfxewxlm Hj Akaodb Serial: HO2859 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph

Condition: used, power capacity 1,5 kW volt 380 V ampere 5,75 A Bdjdpfx Akoytg Uajaeb

Condition: used, power capacity 2,2 kW volt 380 V ampere 5,3 A Bdjdjytg T Nspfx Akajb

Condition: used, power capacity 1,1 kW volt 380 V Bdedpfx Ajytg T Aekasb ampere 2,8 A

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, total height: 1,800 mm, total length: 600 mm, total width: 780 mm, overall weight: 280 kg, table height: 930 mm, workpiece width (max.): 390 mm, workpiece height (max.): 210 mm, spindle motor power: 750 W, table length: 520 mm, table width: 470 mm, workpiece diameter (max.): 230 mm, Equipment: documentation/manual, We are offering this ready-to-use Bauer Maschinenbau HS 300 ZA vertical machining center, year of manufacture unknown. For sale is a Bauer automatic band saw HS 300 ZA (400 V). Used, well-maintained, and ideal for workshops, production facilities, or material cutting applications. Technical Data (400 V) Voltage: 400 V Saw motor: 0.75 kW Weight: approx. 280 kg Dimensions Length: 600 mm Width: 780 mm Height: 1800 mm Cutting Capacity Cutting height (H): 210 mm Cutting width (W): 390 mm Opening (A): 230 mm Saw Band Saw band wheels: Ø 400 mm (cork surface) Saw band length: 3000 mm Saw band width: 3–20 mm Table Table size: 520 × 470 mm Table height: 930 mm Tilt range: 10° left / 30° right Saw band guide: sliding or roller guides Documents / Identification EC Declaration of Conformity available (CE). Year of manufacture: 2004 Machine No.: 04-38012 Machine type (according to declaration): 4001 Price negotiable, net plus VAT. Location / Collection Bodpfx Aksy Exwreaedb 93073 Neutraubling Pickup only – loading can be organized upon arrangement. Inspection possible. Mobile: +4916097215567 If you have any questions or require more information, feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Offer consists of: • Year of manufacture: 2020 • Impressions: approx. 64 million • SW4 perfecting • FAPC fully automatic plate change • ALV2 extended delivery • 18,000 sheets/h • 'CX' carton package • ErgoTronic ColorControl • Extended camera system • Tecnotrans Beta.f • New rollers: replaced in 2025 Comprehensive technical documentation available on request. Video available. Bjdpfx Akeyyyb Usaedb